le1t0-deprec 2.1.6.001

data/lib/deprec/templates/wordpress/apache2_wordpress_vhost.conf.erb

@@ -0,0 +1,31 @@
+<VirtualHost *:80>
+  ServerName <%= wordpress_domain %>
+  DocumentRoot <%= "#{wordpress_install_dir}" %>
+
+  <Directory <%= "#{wordpress_install_dir}" %>>
+	DirectoryIndex index.html index.htm index.php
+    Options FollowSymLinks
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+  </Directory>
+
+  RewriteEngine On
+
+  # Prevent access to .svn directories
+  RewriteRule ^(.*/)?\.svn/ - [F,L]
+  ErrorDocument 403 "Access Forbidden"
+
+  # Prevent access to .git directories
+  RewriteRule ^(.*/)?\.git/ - [F,L]
+  ErrorDocument 403 "Access Forbidden"
+  
+  # Deflate
+  AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css application/x-javascript
+  BrowserMatch ^Mozilla/4 gzip-only-text/html
+  BrowserMatch ^Mozilla/4\.0[678] no-gzip
+  BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
+
+  ErrorLog logs/<%= wordpress_domain %>-error_log
+  CustomLog logs/<%= wordpress_domain %>-access_log combined
+</VirtualHost>

data/lib/deprec/templates/wordpress/wp-config.php.erb

@@ -0,0 +1,31 @@
+<?php
+// ** MySQL settings ** //
+define('DB_NAME',     '<%= db_name %>');     // The name of the database
+define('DB_USER', 	  '<%= db_user %>');     // Your MySQL username
+define('DB_PASSWORD', '<%= db_pass %>'); // ...and password
+define('DB_HOST',     '<%= db_host %>');     // 99% chance you won't need to change this value
+define('DB_CHARSET',  '<%= db_charset %>');
+define('DB_COLLATE',  '<%= db_collate %>');
+
+// Change each KEY to a different unique phrase.  You won't have to remember the phrases later,
+// so make them long and complicated.  You can visit http://api.wordpress.org/secret-key/1.1/
+// to get keys generated for you, or just make something up.  Each key should have a different phrase.
+define('AUTH_KEY', 		  '<%= auth_key %>'); // Change this to a unique phrase.
+define('SECURE_AUTH_KEY', '<%= secure_auth_key %>'); // Change this to a unique phrase.
+define('LOGGED_IN_KEY',   '<%= logged_in_key %>'); // Change this to a unique phrase.
+
+// You can have multiple installations in one database if you give each a unique prefix
+$table_prefix  = 'wp_';   // Only numbers, letters, and underscores please!
+
+// Change this to localize WordPress.  A corresponding MO file for the
+// chosen language must be installed to wp-content/languages.
+// For example, install de.mo to wp-content/languages and set WPLANG to 'de'
+// to enable German language support.
+define ('WPLANG', '');
+
+/* That's all, stop editing! Happy blogging. */
+
+if ( !defined('ABSPATH') )
+	define('ABSPATH', dirname(__FILE__) . '/');
+require_once(ABSPATH . 'wp-settings.php');
+?>

data/lib/deprec/templates/wpmu/apache_vhost.conf.erb

@@ -0,0 +1,13 @@
+NameVirtualHost *
+<VirtualHost *>
+    ServerName <%= wpmu_domain %>
+    DocumentRoot <%= wpmu_root %>
+    <Directory <%= wpmu_root %>>
+        Options Indexes FollowSymLinks MultiViews
+        AllowOverride FileInfo Options
+        Order allow,deny
+        allow from all
+    </Directory>
+    ErrorLog <%= apache_log_dir %>/wpmu-error.log
+    CustomLog <%= apache_log_dir %>/wpmu-access.log combined
+</VirtualHost>

data/lib/deprec/templates/xen/network-bridge-wrapper

@@ -0,0 +1,3 @@
+#!/bin/sh
+/etc/xen/scripts/network-bridge $1 netdev=eth0 bridge=xenbr0 vifnum=0 antispoof=no
+/etc/xen/scripts/network-bridge $1 netdev=eth1 bridge=xenbr1 vifnum=1 antispoof=no

data/lib/deprec/templates/xen/xend-config.sxp.erb

@@ -0,0 +1,195 @@
+# -*- sh -*-
+
+#
+# Xend configuration file.
+#
+
+# This example configuration is appropriate for an installation that 
+# utilizes a bridged network configuration. Access to xend via http
+# is disabled.  
+
+# Commented out entries show the default for that entry, unless otherwise
+# specified.
+
+#(logfile /var/log/xen/xend.log)
+#(loglevel DEBUG)
+
+
+# The Xen-API server configuration.  (Please note that this server is
+# available as an UNSUPPORTED PREVIEW in Xen 3.0.4, and should not be relied
+# upon).
+#
+# This value configures the ports, interfaces, and access controls for the
+# Xen-API server.  Each entry in the list starts with either unix, a port
+# number, or an address:port pair.  If this is "unix", then a UDP socket is
+# opened, and this entry applies to that.  If it is a port, then Xend will
+# listen on all interfaces on that TCP port, and if it is an address:port
+# pair, then Xend will listen on the specified port, using the interface with
+# the specified address.
+#
+# The subsequent string configures the user-based access control for the
+# listener in question.  This can be one of "none" or "pam", indicating either
+# that users should be allowed access unconditionally, or that the local
+# Pluggable Authentication Modules configuration should be used.  If this
+# string is missing or empty, then "pam" is used.
+#
+# The final string gives the host-based access control for that listener. If
+# this is missing or empty, then all connections are accepted.  Otherwise,
+# this should be a space-separated sequence of regular expressions; any host
+# with a fully-qualified domain name or an IP address that matches one of
+# these regular expressions will be accepted.
+#
+# Example: listen on TCP port 9363 on all interfaces, accepting connections
+# only from machines in example.com or localhost, and allow access through
+# the unix domain socket unconditionally:
+#
+#   (xen-api-server ((9363 pam '^localhost$ example\\.com$')
+#                    (unix none)))
+#
+# Optionally, the TCP Xen-API server can use SSL by specifying the private
+# key and certificate location:
+#
+#                    (9367 pam '' /etc/xen/xen-api.key /etc/xen/xen-api.crt)
+#
+# Default:
+#   (xen-api-server ((unix)))
+
+
+#(xend-http-server no)
+#(xend-unix-server no)
+#(xend-tcp-xmlrpc-server no)
+#(xend-unix-xmlrpc-server yes)
+#(xend-relocation-server no)
+(xend-relocation-server no)
+
+#(xend-unix-path /var/lib/xend/xend-socket)
+
+
+# Address and port xend should use for the legacy TCP XMLRPC interface, 
+# if xen-tcp-xmlrpc-server is set.
+#(xen-tcp-xmlrpc-server-address 'localhost')
+#(xen-tcp-xmlrpc-server-port 8006)
+
+# SSL key and certificate to use for the legacy TCP XMLRPC interface.
+# Setting these will mean that this port serves only SSL connections as
+# opposed to plaintext ones.
+#(xend-tcp-xmlrpc-server-ssl-key-file  /etc/xen/xmlrpc.key)
+#(xend-tcp-xmlrpc-server-ssl-cert-file /etc/xen/xmlrpc.crt)
+
+
+# Port xend should use for the HTTP interface, if xend-http-server is set.
+#(xend-port            8000)
+
+# Port xend should use for the relocation interface, if xend-relocation-server
+# is set.
+#(xend-relocation-port 8002)
+
+# Address xend should listen on for HTTP connections, if xend-http-server is
+# set.
+# Specifying 'localhost' prevents remote connections.
+# Specifying the empty string '' (the default) allows all connections.
+#(xend-address '')
+#(xend-address localhost)
+
+# Address xend should listen on for relocation-socket connections, if
+# xend-relocation-server is set.
+# Meaning and default as for xend-address above.
+#(xend-relocation-address '')
+
+# The hosts allowed to talk to the relocation port.  If this is empty (the
+# default), then all connections are allowed (assuming that the connection
+# arrives on a port and interface on which we are listening; see
+# xend-relocation-port and xend-relocation-address above).  Otherwise, this
+# should be a space-separated sequence of regular expressions.  Any host with
+# a fully-qualified domain name or an IP address that matches one of these
+# regular expressions will be accepted.
+#
+# For example:
+#  (xend-relocation-hosts-allow '^localhost$ ^.*\\.example\\.org$')
+#
+#(xend-relocation-hosts-allow '')
+(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
+
+# The limit (in kilobytes) on the size of the console buffer
+#(console-limit 1024)
+
+##
+# To bridge network traffic, like this:
+#
+# dom0: fake eth0 -> vif0.0 -+
+#                            |
+#                          bridge -> real eth0 -> the network
+#                            |
+# domU: fake eth0 -> vifN.0 -+
+#
+# use
+#
+(network-script network-bridge-wrapper)
+#
+# Your default ethernet device is used as the outgoing interface, by default. 
+# To use a different one (e.g. eth1) use
+#
+# (network-script 'network-bridge netdev=eth1')
+#
+# The bridge is named xenbr0, by default.  To rename the bridge, use
+#
+# (network-script 'network-bridge bridge=<name>')
+#
+# It is possible to use the network-bridge script in more complicated
+# scenarios, such as having two outgoing interfaces, with two bridges, and
+# two fake interfaces per guest domain.  To do things like this, write
+# yourself a wrapper script, and call network-bridge from it, as appropriate.
+#
+# (network-script network-dummy)
+
+# The script used to control virtual interfaces.  This can be overridden on a
+# per-vif basis when creating a domain or a configuring a new vif.  The
+# vif-bridge script is designed for use with the network-bridge script, or
+# similar configurations.
+#
+# If you have overridden the bridge name using
+# (network-script 'network-bridge bridge=<name>') then you may wish to do the
+# same here.  The bridge name can also be set when creating a domain or
+# configuring a new vif, but a value specified here would act as a default.
+#
+# If you are using only one bridge, the vif-bridge script will discover that,
+# so there is no need to specify it explicitly.
+#
+(vif-script vif-bridge)
+
+
+## Use the following if network traffic is routed, as an alternative to the
+# settings for bridged networking given above.
+#(network-script network-route)
+#(vif-script     vif-route)
+
+
+## Use the following if network traffic is routed with NAT, as an alternative
+# to the settings for bridged networking given above.
+#(network-script network-nat)
+#(vif-script     vif-nat)
+
+
+# Dom0 will balloon out when needed to free memory for domU.
+# dom0-min-mem is the lowest memory level (in MB) dom0 will get down to.
+# If dom0-min-mem=0, dom0 will never balloon out.
+(dom0-min-mem 196)
+
+# In SMP system, dom0 will use dom0-cpus # of CPUS
+# If dom0-cpus = 0, dom0 will take all cpus available
+(dom0-cpus 0)
+
+# Whether to enable core-dumps when domains crash.
+#(enable-dump no)
+
+# The tool used for initiating virtual TPM migration
+#(external-migration-tool '')
+
+# The interface for VNC servers to listen on. Defaults
+# to 127.0.0.1  To restore old 'listen everywhere' behaviour
+# set this to 0.0.0.0
+#(vnc-listen '127.0.0.1')
+
+# The default password for VNC console on HVM domain.
+# Empty string is no authentication.
+(vncpasswd '')

data/lib/deprec/templates/xen/xend-init.erb

@@ -0,0 +1,57 @@
+#!/bin/bash
+### BEGIN INIT INFO
+# Provides:          xend
+# Required-Start:    $local_fs
+# Required-Stop:     $local_fs
+# Default-Start:     2 3 4 5
+# Default-Stop:      S 0 1 6
+# Short-Description: XEN control daemon
+# Description:       XEN control daemon
+### END INIT INFO
+
+if ! grep -q "control_d" /proc/xen/capabilities ; then
+	exit 0
+fi
+
+# Wait for Xend to be up
+function await_daemons_up
+{
+	i=1
+	rets=10
+	xend status
+	while [ $? -ne 0 -a $i -lt $rets ]; do
+	    sleep 1
+	    echo -n .
+	    i=$(($i + 1))
+	    xend status
+	done
+}
+
+case "$1" in
+  start)
+	xend start
+	await_daemons_up
+	;;
+  stop)
+	/etc/init.d/xendomains stop # make sure domains are shut down
+	xend stop
+	;;
+  status)
+	xend status
+	;;
+  reload)
+        xend reload
+        ;;
+  restart|force-reload)
+	xend restart
+	await_daemons_up
+	;;
+  *)
+	# do not advertise unreasonable commands that there is no reason
+	# to use with this device
+	echo $"Usage: $0 {start|stop|status|restart|reload|force-reload}"
+	exit 1
+esac
+
+exit $?
+

data/lib/deprec/templates/xen/xendomains.erb

@@ -0,0 +1,137 @@
+## Path: System/xen
+## Description: xen domain start/stop on boot
+## Type: string
+## Default: 
+#
+# The xendomains script can send SysRq requests to domains on shutdown.
+# If you don't want to MIGRATE, SAVE, or SHUTDOWN, this may be a possibility
+# to do a quick and dirty shutdown ("s e i u o") or at least sync the disks
+# of the domains ("s").
+#
+XENDOMAINS_SYSRQ=""
+
+## Type: integer 
+## Default: 100000
+#
+# If XENDOMAINS_SYSRQ is set, this variable determines how long to wait
+# (in microseconds) after each SysRq, so the domain has a chance to react.
+# If you want to a quick'n'dirty shutdown via SysRq, you may want to set
+# it to a relatively high value (1200000).
+#
+XENDOMAINS_USLEEP=100000
+
+## Type: integer
+## Default: 5000000
+#
+# When creating a guest domain, it is sensible to allow a little time for it
+# to get started before creating another domain or proceeding through the
+# boot process.  Without this, the booting guests will thrash the disk as they
+# start up.  This timeout (in microseconds) specifies the delay after guest
+# domain creation.
+#
+XENDOMAINS_CREATE_USLEEP=5000000
+
+## Type: string
+## Default: ""
+#
+# Set this to a non-empty string if you want to migrate virtual machines
+# on shutdown. The string will be passed to the xm migrate DOMID command
+# as is: It should contain the target IP address of the physical machine
+# to migrate to and optionally parameters like --live. Leave empty if
+# you don't want to try virtual machine relocation on shutdown.
+# If migration succeeds, neither SAVE nor SHUTDOWN will be executed for
+# that domain.
+#
+XENDOMAINS_MIGRATE=""
+
+## Type: string
+## Default: /var/lib/xen/save
+#
+# Directory to save running domains to when the system (dom0) is
+# shut down. Will also be used to restore domains from if # XENDOMAINS_RESTORE
+# is set (see below). Leave empty to disable domain saving on shutdown 
+# (e.g. because you rather shut domains down).
+# If domain saving does succeed, SHUTDOWN will not be executed.
+#
+# XENDOMAINS_SAVE=/var/lib/xen/save
+
+## Type: string
+## Default: "--halt --wait"
+#
+# If neither MIGRATE nor SAVE were enabled or if they failed, you can
+# try to shut down a domain by sending it a shutdown request. To do this,
+# set this to "--halt --wait". Omit the "--wait" flag to avoid waiting
+# for the domain to be really down. Leave empty to skip domain shutdown.
+#
+XENDOMAINS_SHUTDOWN="--halt --wait"
+
+## Type: string
+## Default: "--all --halt --wait"
+#
+# After we have gone over all virtual machines (resp. all automatically
+# started ones, see XENDOMAINS_AUTO_ONLY below) in a loop and sent SysRq,
+# migrated, saved and/or shutdown according to the settings above, we
+# might want to shutdown the virtual machines that are still running
+# for some reason or another. To do this, set this variable to
+# "--all --halt --wait", it will be passed to xm shutdown.
+# Leave it empty not to do anything special here.
+# (Note: This will hit all virtual machines, even if XENDOMAINS_AUTO_ONLY
+# is set.)
+# 
+XENDOMAINS_SHUTDOWN_ALL="--all --halt --wait"
+
+## Type: boolean
+## Default: true
+#
+# This variable determines whether saved domains from XENDOMAINS_SAVE
+# will be restored on system startup. 
+#
+XENDOMAINS_RESTORE=true
+
+## Type: string
+## Default: /etc/xen/auto
+#
+# This variable sets the directory where domains configurations
+# are stored that should be started on system startup automatically.
+# Leave empty if you don't want to start domains automatically
+# (or just don't place any xen domain config files in that dir).
+# Note that the script tries to be clever if both RESTORE and AUTO are 
+# set: It will first restore saved domains and then only start domains
+# in AUTO which are not running yet. 
+# Note that the name matching is somewhat fuzzy.
+#
+XENDOMAINS_AUTO=/etc/xen/auto
+
+## Type: boolean
+## Default: false
+# 
+# If this variable is set to "true", only the domains started via config 
+# files in XENDOMAINS_AUTO will be treated according to XENDOMAINS_SYSRQ,
+# XENDOMAINS_MIGRATE, XENDOMAINS_SAVE, XENDMAINS_SHUTDOWN; otherwise
+# all running domains will be. 
+# Note that the name matching is somewhat fuzzy.
+# 
+XENDOMAINS_AUTO_ONLY=false
+
+## Type: integer
+## Default: 300
+#
+# On xendomains stop, a number of xm commands (xm migrate, save, shutdown,
+# shutdown --all) may be executed. In the worst case, these commands may
+# stall forever, which will prevent a successful shutdown of the machine.
+# If this variable is non-zero, the script will set up a watchdog timer
+# for every of these xm commands and time it out after the number of seconds
+# specified by this variable.
+# Note that SHUTDOWN_ALL will not be called if no virtual machines or only
+# zombies are still running, so you don't need to enable this timeout just
+# for the zombie case.
+# The setting should be large enough to make sure that migrate/save/shutdown
+# can succeed. If you do live migrations, keep in mind that live migration
+# of a 1GB machine over Gigabit ethernet may actually take something like
+# 100s (assuming that live migration uses 10% of the network # bandwidth).
+# Depending on the virtual machine, a shutdown may also require a significant
+# amount of time. So better setup this variable to a huge number and hope the
+# watchdog never fires.
+#
+XENDOMAINS_STOP_MAXWAIT=300
+