late-sdk 0.0.533 → 0.0.535

data/openapi.yaml

@@ -9176,9 +9176,7 @@ paths:
           content:
             application/json:
               schema:
-                type: object
-                properties:
-                  error: { type: string }
+                $ref: '#/components/schemas/ErrorResponse'
               examples:
                 invalidMetric:
                   value:
@@ -25660,13 +25658,19 @@ paths:
       summary: Send an SMS/MMS
       description: |
         Sends an SMS (or MMS when `mediaUrls` is set) from one of your
-        SMS-enabled numbers. At least one of `text` / `mediaUrls` is required.
-        Both numbers are normalized to E.164, so `from` matches regardless of
-        formatting and replies thread into the same inbox conversation.
+        SMS-enabled numbers, or from an approved alphanumeric sender ID
+        (`/v1/sms/sender-ids`). At least one of `text` / `mediaUrls` is
+        required. Numbers are normalized to E.164, so `from` matches regardless
+        of formatting and replies thread into the same inbox conversation.
 
         US numbers must have an approved carrier registration
         (`/v1/sms/registrations`) before messages deliver.
 
+        **Alphanumeric sender IDs** are one-way and international only: they
+        cannot reach the US, Canada, or Puerto Rico (403), are text-only (no
+        MMS), and recipients cannot reply. Some destination countries
+        substitute a numeric sender to ensure delivery.
+
         **Idempotency:** send an `Idempotency-Key` header to make retries safe:
         same key + same body replays the original response instead of sending a
         second message; same key + different body returns 422; a key still in
@@ -25690,7 +25694,7 @@ paths:
               type: object
               required: [from, to]
               properties:
-                from: { type: string, description: One of your SMS-enabled numbers (E.164; formatting is normalized). }
+                from: { type: string, description: 'One of your SMS-enabled numbers (E.164; formatting is normalized), or an approved alphanumeric sender ID (3-11 letters/digits/spaces, created via `/v1/sms/sender-ids`).' }
                 to: { type: string, description: Recipient number (E.164). }
                 text: { type: string, description: "Message body. Required unless `mediaUrls` is set. Max 10 SMS segments (1530 GSM-7 or 670 unicode characters)." }
                 mediaUrls:
@@ -25713,10 +25717,13 @@ paths:
                   id: { type: string, description: Message ID }
                   conversationId: { type: string, description: Inbox conversation the message was threaded into. }
                   status: { type: string, enum: [sent] }
+        '400': { $ref: '#/components/responses/BadRequest' }
         '401': { $ref: '#/components/responses/Unauthorized' }
-        '404': { description: "No SMS-enabled number matches `from`" }
+        '403': { description: 'Send refused by a gate: US registration missing/pending, MMS not supported by this sender, or an alphanumeric sender ID addressed to the US, Canada or Puerto Rico.' }
+        '404': { description: "No SMS-enabled number or sender ID matches `from`" }
         '409': { description: Same Idempotency-Key still processing; retry after a short backoff }
         '422': { description: Idempotency-Key reused with a different body }
+        '429': { description: 'Daily sender ID message limit reached for the workspace (alphanumeric sends only, code `alpha_daily_limit_reached`; resets midnight UTC, raisable via support).' }
         '502': { description: Carrier-side send failed }
 
   /v1/sms/lookup:
@@ -25786,6 +25793,155 @@ paths:
               schema: { type: string, description: "`format=csv` download. Columns: phone_number, opted_out_at, keyword, our_number" }
         '401': { $ref: '#/components/responses/Unauthorized' }
 
+  /v1/sms/sender-ids:
+    post:
+      operationId: createSmsSenderId
+      tags: [SMS]
+      summary: Create an alphanumeric sender ID
+      description: |
+        Registers an alphanumeric sender ID (e.g. `ZERNIO`) — a branded `from`
+        for one-way international SMS. No phone number purchase or carrier
+        registration is needed; once created, pass it as `from` on
+        `POST /v1/sms/messages`.
+
+        Constraints: 3-11 characters (letters, digits, spaces; at least one
+        letter). Sends cannot reach the US, Canada, or Puerto Rico, are
+        text-only, and recipients cannot reply. Sender IDs that impersonate
+        well-known brands or institutions are rejected, and an ID already
+        registered by another workspace returns 409 (active sender IDs are
+        globally unique, first-come-first-served). Creating the same sender ID
+        again is a no-op (re-activates it after a delete).
+      security:
+        - bearerAuth: []
+      requestBody:
+        required: true
+        content:
+          application/json:
+            schema:
+              type: object
+              required: [senderId]
+              properties:
+                senderId:
+                  type: string
+                  minLength: 3
+                  maxLength: 11
+                  description: 'The sender ID recipients will see (3-11 letters/digits/spaces, at least one letter, no leading/trailing space).'
+      responses:
+        '200':
+          description: Sender ID created (or re-activated).
+          content:
+            application/json:
+              schema:
+                type: object
+                properties:
+                  id: { type: string, description: Sender ID resource id. }
+                  senderId: { type: string }
+                  isActive: { type: boolean }
+        '400': { $ref: '#/components/responses/BadRequest' }
+        '401': { $ref: '#/components/responses/Unauthorized' }
+        '403': { description: 'Workspace is not on usage-based billing, or already holds the maximum of 5 active sender IDs (code `sender_id_limit_reached`; raisable via support).' }
+        '409': { description: 'Sender ID already registered by another workspace (code `sender_id_taken`).' }
+        '422': { description: 'Sender ID rejected: it appears to impersonate a protected brand or institution.' }
+    get:
+      operationId: listSmsSenderIds
+      tags: [SMS]
+      summary: List alphanumeric sender IDs
+      security:
+        - bearerAuth: []
+      responses:
+        '200':
+          description: The workspace's sender IDs, newest first.
+          content:
+            application/json:
+              schema:
+                type: object
+                properties:
+                  senderIds:
+                    type: array
+                    items:
+                      type: object
+                      properties:
+                        id: { type: string }
+                        senderId: { type: string }
+                        isActive: { type: boolean }
+                        createdAt: { type: [string, "null"], format: date-time }
+                  budget:
+                    type: object
+                    description: 'Workspace-wide daily sending budget, shared by every sender ID (resets midnight UTC).'
+                    properties:
+                      cap: { type: integer, description: 'Daily message cap (raisable via `/v1/sms/sender-ids/limit-request`).' }
+                      usedToday: { type: integer, description: Messages already counted against today's cap. }
+                      level: { type: integer, description: 'Cap tier (Level 1 = 500/day).' }
+                      pendingRequest:
+                        type: [object, "null"]
+                        description: 'The in-flight cap-raise request awaiting review, or null. While set, further requests return 409.'
+                        properties:
+                          requestedCap: { type: integer }
+                          level: { type: integer }
+                          requestedAt: { type: [string, "null"], format: date-time }
+        '401': { $ref: '#/components/responses/Unauthorized' }
+
+  /v1/sms/sender-ids/limit-request:
+    post:
+      operationId: requestSmsSenderIdLimitIncrease
+      tags: [SMS]
+      summary: Request a higher sender ID daily limit
+      description: |
+        Asks support to raise the workspace's daily sender-ID message cap.
+        There is no self-serve raise: the request (desired cap + use case) is
+        reviewed manually, usually within a business day.
+      security:
+        - bearerAuth: []
+      requestBody:
+        required: true
+        content:
+          application/json:
+            schema:
+              type: object
+              required: [requestedCap, reason]
+              properties:
+                requestedCap: { type: integer, description: 'Desired daily message cap. Must exceed the current cap.' }
+                reason: { type: string, minLength: 10, maxLength: 2000, description: 'Use case and audience (what you send, to whom, opt-in status).' }
+      responses:
+        '200':
+          description: Request submitted for review.
+          content:
+            application/json:
+              schema:
+                type: object
+                properties:
+                  requested: { type: boolean }
+                  requestedCap: { type: integer }
+        '400': { $ref: '#/components/responses/BadRequest' }
+        '401': { $ref: '#/components/responses/Unauthorized' }
+        '409': { description: 'A cap-raise request is already awaiting review (code `sender_id_raise_pending`); one at a time.' }
+        '503': { description: Request could not be submitted; retry or contact support. }
+
+  /v1/sms/sender-ids/{id}:
+    delete:
+      operationId: deleteSmsSenderId
+      tags: [SMS]
+      summary: Delete an alphanumeric sender ID
+      description: |
+        Deactivates the sender ID so it can no longer send. Re-creating the
+        same sender ID via `POST /v1/sms/sender-ids` re-activates it.
+      security:
+        - bearerAuth: []
+      parameters:
+        - { name: id, in: path, required: true, schema: { type: string }, description: Sender ID resource id. }
+      responses:
+        '200':
+          description: Sender ID deactivated.
+          content:
+            application/json:
+              schema:
+                type: object
+                properties:
+                  deleted: { type: boolean }
+        '400': { $ref: '#/components/responses/BadRequest' }
+        '401': { $ref: '#/components/responses/Unauthorized' }
+        '404': { description: Sender ID not found. }
+
   /v1/sms/registrations:
     post:
       operationId: startSmsRegistration

data/spec/api/sms_api_spec.rb

@@ -45,6 +45,18 @@ describe 'SMSApi' do
     end
   end
 
+  # unit tests for create_sms_sender_id
+  # Create an alphanumeric sender ID
+  # Registers an alphanumeric sender ID (e.g. `ZERNIO`) — a branded `from` for one-way international SMS. No phone number purchase or carrier registration is needed; once created, pass it as `from` on `POST /v1/sms/messages`.  Constraints: 3-11 characters (letters, digits, spaces; at least one letter). Sends cannot reach the US, Canada, or Puerto Rico, are text-only, and recipients cannot reply. Sender IDs that impersonate well-known brands or institutions are rejected, and an ID already registered by another workspace returns 409 (active sender IDs are globally unique, first-come-first-served). Creating the same sender ID again is a no-op (re-activates it after a delete). 
+  # @param create_sms_sender_id_request 
+  # @param [Hash] opts the optional parameters
+  # @return [CreateSmsSenderId200Response]
+  describe 'create_sms_sender_id test' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
   # unit tests for deactivate_sms_registration
   # Deactivate a brand/campaign registration
   # Terminates the campaign with the carrier registry so the recurring monthly campaign fee stops (carriers bill the first 3 months of a campaign regardless). Numbers covered by it can no longer SEND texts — receiving is unaffected — until they're registered under a new brand. Irreversible: a deactivated campaign cannot be restored; texting again later requires a new registration (new one-time and review fees). Idempotent. 
@@ -57,6 +69,18 @@ describe 'SMSApi' do
     end
   end
 
+  # unit tests for delete_sms_sender_id
+  # Delete an alphanumeric sender ID
+  # Deactivates the sender ID so it can no longer send. Re-creating the same sender ID via `POST /v1/sms/sender-ids` re-activates it. 
+  # @param id Sender ID resource id.
+  # @param [Hash] opts the optional parameters
+  # @return [DeleteSmsSenderId200Response]
+  describe 'delete_sms_sender_id test' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
   # unit tests for disable_sms_on_number
   # Disable SMS on a number
   # Turns off SMS for the number (deactivates its SMS account). The carrier registration is untouched, so re-enabling later just reactivates it, with no re-registration. 
@@ -117,6 +141,16 @@ describe 'SMSApi' do
     end
   end
 
+  # unit tests for list_sms_sender_ids
+  # List alphanumeric sender IDs
+  # @param [Hash] opts the optional parameters
+  # @return [ListSmsSenderIds200Response]
+  describe 'list_sms_sender_ids test' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
   # unit tests for lookup_sms_number
   # Look up carrier + line type
   # Carrier name and line type (mobile / landline / voip / toll-free) for a number, plus `smsReachable` (landlines can't receive SMS). Use it to validate recipients before sending. Each lookup is billed by the carrier-data provider, so call it explicitly (e.g. pre-validating an opt-in list), not on every send. 
@@ -129,6 +163,18 @@ describe 'SMSApi' do
     end
   end
 
+  # unit tests for request_sms_sender_id_limit_increase
+  # Request a higher sender ID daily limit
+  # Asks support to raise the workspace's daily sender-ID message cap. There is no self-serve raise: the request (desired cap + use case) is reviewed manually, usually within a business day. 
+  # @param request_sms_sender_id_limit_increase_request 
+  # @param [Hash] opts the optional parameters
+  # @return [RequestSmsSenderIdLimitIncrease200Response]
+  describe 'request_sms_sender_id_limit_increase test' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
   # unit tests for resend_sms_registration_otp
   # Re-send the sole-prop OTP
   # Re-sends the sole-proprietor verification PIN to the brand's mobile number — use it when the original code expired or never arrived. Only valid while the registration is pending and awaiting its OTP; rate limited to one send per minute. 
@@ -155,7 +201,7 @@ describe 'SMSApi' do
 
   # unit tests for send_sms
   # Send an SMS/MMS
-  # Sends an SMS (or MMS when `mediaUrls` is set) from one of your SMS-enabled numbers. At least one of `text` / `mediaUrls` is required. Both numbers are normalized to E.164, so `from` matches regardless of formatting and replies thread into the same inbox conversation.  US numbers must have an approved carrier registration (`/v1/sms/registrations`) before messages deliver.  **Idempotency:** send an `Idempotency-Key` header to make retries safe: same key + same body replays the original response instead of sending a second message; same key + different body returns 422; a key still in flight returns 409. 
+  # Sends an SMS (or MMS when `mediaUrls` is set) from one of your SMS-enabled numbers, or from an approved alphanumeric sender ID (`/v1/sms/sender-ids`). At least one of `text` / `mediaUrls` is required. Numbers are normalized to E.164, so `from` matches regardless of formatting and replies thread into the same inbox conversation.  US numbers must have an approved carrier registration (`/v1/sms/registrations`) before messages deliver.  **Alphanumeric sender IDs** are one-way and international only: they cannot reach the US, Canada, or Puerto Rico (403), are text-only (no MMS), and recipients cannot reply. Some destination countries substitute a numeric sender to ensure delivery.  **Idempotency:** send an `Idempotency-Key` header to make retries safe: same key + same body replays the original response instead of sending a second message; same key + different body returns 422; a key still in flight returns 409. 
   # @param send_sms_request 
   # @param [Hash] opts the optional parameters
   # @option opts [String] :idempotency_key Optional client-generated unique key (e.g. a UUID) that makes send retries safe. Same key + same body replays the original response; same key + different body → 422; key still processing → 409.

data/spec/models/create_sms_sender_id200_response_spec.rb

@@ -0,0 +1,48 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::CreateSmsSenderId200Response
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::CreateSmsSenderId200Response do
+  #let(:instance) { Zernio::CreateSmsSenderId200Response.new }
+
+  describe 'test an instance of CreateSmsSenderId200Response' do
+    it 'should create an instance of CreateSmsSenderId200Response' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::CreateSmsSenderId200Response)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "sender_id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "is_active"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/create_sms_sender_id_request_spec.rb

@@ -0,0 +1,36 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::CreateSmsSenderIdRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::CreateSmsSenderIdRequest do
+  #let(:instance) { Zernio::CreateSmsSenderIdRequest.new }
+
+  describe 'test an instance of CreateSmsSenderIdRequest' do
+    it 'should create an instance of CreateSmsSenderIdRequest' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::CreateSmsSenderIdRequest)
+    end
+  end
+
+  describe 'test attribute "sender_id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/delete_sms_sender_id200_response_spec.rb

@@ -0,0 +1,36 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::DeleteSmsSenderId200Response
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::DeleteSmsSenderId200Response do
+  #let(:instance) { Zernio::DeleteSmsSenderId200Response.new }
+
+  describe 'test an instance of DeleteSmsSenderId200Response' do
+    it 'should create an instance of DeleteSmsSenderId200Response' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::DeleteSmsSenderId200Response)
+    end
+  end
+
+  describe 'test attribute "deleted"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/list_sms_sender_ids200_response_budget_pending_request_spec.rb

@@ -0,0 +1,48 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::ListSmsSenderIds200ResponseBudgetPendingRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::ListSmsSenderIds200ResponseBudgetPendingRequest do
+  #let(:instance) { Zernio::ListSmsSenderIds200ResponseBudgetPendingRequest.new }
+
+  describe 'test an instance of ListSmsSenderIds200ResponseBudgetPendingRequest' do
+    it 'should create an instance of ListSmsSenderIds200ResponseBudgetPendingRequest' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::ListSmsSenderIds200ResponseBudgetPendingRequest)
+    end
+  end
+
+  describe 'test attribute "requested_cap"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "level"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "requested_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/list_sms_sender_ids200_response_budget_spec.rb

@@ -0,0 +1,54 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::ListSmsSenderIds200ResponseBudget
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::ListSmsSenderIds200ResponseBudget do
+  #let(:instance) { Zernio::ListSmsSenderIds200ResponseBudget.new }
+
+  describe 'test an instance of ListSmsSenderIds200ResponseBudget' do
+    it 'should create an instance of ListSmsSenderIds200ResponseBudget' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::ListSmsSenderIds200ResponseBudget)
+    end
+  end
+
+  describe 'test attribute "cap"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "used_today"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "level"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "pending_request"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/list_sms_sender_ids200_response_sender_ids_inner_spec.rb

@@ -0,0 +1,54 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::ListSmsSenderIds200ResponseSenderIdsInner
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::ListSmsSenderIds200ResponseSenderIdsInner do
+  #let(:instance) { Zernio::ListSmsSenderIds200ResponseSenderIdsInner.new }
+
+  describe 'test an instance of ListSmsSenderIds200ResponseSenderIdsInner' do
+    it 'should create an instance of ListSmsSenderIds200ResponseSenderIdsInner' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::ListSmsSenderIds200ResponseSenderIdsInner)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "sender_id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "is_active"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/list_sms_sender_ids200_response_spec.rb

@@ -0,0 +1,42 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::ListSmsSenderIds200Response
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::ListSmsSenderIds200Response do
+  #let(:instance) { Zernio::ListSmsSenderIds200Response.new }
+
+  describe 'test an instance of ListSmsSenderIds200Response' do
+    it 'should create an instance of ListSmsSenderIds200Response' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::ListSmsSenderIds200Response)
+    end
+  end
+
+  describe 'test attribute "sender_ids"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "budget"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/request_sms_sender_id_limit_increase200_response_spec.rb

@@ -0,0 +1,42 @@
+=begin
+#Zernio API
+
+#API reference for Zernio. Authenticate with a Bearer API key. Base URL: https://zernio.com/api 
+
+The version of the OpenAPI document: 1.0.4
+Contact: support@zernio.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.19.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Zernio::RequestSmsSenderIdLimitIncrease200Response
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Zernio::RequestSmsSenderIdLimitIncrease200Response do
+  #let(:instance) { Zernio::RequestSmsSenderIdLimitIncrease200Response.new }
+
+  describe 'test an instance of RequestSmsSenderIdLimitIncrease200Response' do
+    it 'should create an instance of RequestSmsSenderIdLimitIncrease200Response' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Zernio::RequestSmsSenderIdLimitIncrease200Response)
+    end
+  end
+
+  describe 'test attribute "requested"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "requested_cap"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end