laag-freetype2 2.9.1.1

data/vendor/git.savannah.nongnu.org/r/freetype/freetype2/src/autofit/aflatin.h

@@ -0,0 +1,194 @@
+/***************************************************************************/
+/*                                                                         */
+/*  aflatin.h                                                              */
+/*                                                                         */
+/*    Auto-fitter hinting routines for latin writing system                */
+/*    (specification).                                                     */
+/*                                                                         */
+/*  Copyright 2003-2018 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef AFLATIN_H_
+#define AFLATIN_H_
+
+#include "afhints.h"
+
+
+FT_BEGIN_HEADER
+
+  /* the `latin' writing system */
+
+  AF_DECLARE_WRITING_SYSTEM_CLASS( af_latin_writing_system_class )
+
+
+  /* constants are given with units_per_em == 2048 in mind */
+#define AF_LATIN_CONSTANT( metrics, c )                                      \
+  ( ( (c) * (FT_Long)( (AF_LatinMetrics)(metrics) )->units_per_em ) / 2048 )
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****            L A T I N   G L O B A L   M E T R I C S            *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*
+   *  The following declarations could be embedded in the file `aflatin.c';
+   *  they have been made semi-public to allow alternate writing system
+   *  hinters to re-use some of them.
+   */
+
+
+#define AF_LATIN_IS_TOP_BLUE( b ) \
+          ( (b)->properties & AF_BLUE_PROPERTY_LATIN_TOP )
+#define AF_LATIN_IS_SUB_TOP_BLUE( b ) \
+          ( (b)->properties & AF_BLUE_PROPERTY_LATIN_SUB_TOP )
+#define AF_LATIN_IS_NEUTRAL_BLUE( b ) \
+          ( (b)->properties & AF_BLUE_PROPERTY_LATIN_NEUTRAL )
+#define AF_LATIN_IS_X_HEIGHT_BLUE( b ) \
+          ( (b)->properties & AF_BLUE_PROPERTY_LATIN_X_HEIGHT )
+#define AF_LATIN_IS_LONG_BLUE( b ) \
+          ( (b)->properties & AF_BLUE_PROPERTY_LATIN_LONG )
+
+#define AF_LATIN_MAX_WIDTHS  16
+
+
+#define AF_LATIN_BLUE_ACTIVE      ( 1U << 0 ) /* zone height is <= 3/4px   */
+#define AF_LATIN_BLUE_TOP         ( 1U << 1 ) /* we have a top blue zone   */
+#define AF_LATIN_BLUE_SUB_TOP     ( 1U << 2 ) /* we have a subscript top   */
+                                              /* blue zone                 */
+#define AF_LATIN_BLUE_NEUTRAL     ( 1U << 3 ) /* we have neutral blue zone */
+#define AF_LATIN_BLUE_ADJUSTMENT  ( 1U << 4 ) /* used for scale adjustment */
+                                              /* optimization              */
+
+
+  typedef struct  AF_LatinBlueRec_
+  {
+    AF_WidthRec  ref;
+    AF_WidthRec  shoot;
+    FT_Pos       ascender;
+    FT_Pos       descender;
+    FT_UInt      flags;
+
+  } AF_LatinBlueRec, *AF_LatinBlue;
+
+
+  typedef struct  AF_LatinAxisRec_
+  {
+    FT_Fixed         scale;
+    FT_Pos           delta;
+
+    FT_UInt          width_count;                 /* number of used widths */
+    AF_WidthRec      widths[AF_LATIN_MAX_WIDTHS]; /* widths array          */
+    FT_Pos           edge_distance_threshold;   /* used for creating edges */
+    FT_Pos           standard_width;         /* the default stem thickness */
+    FT_Bool          extra_light;         /* is standard width very light? */
+
+    /* ignored for horizontal metrics */
+    FT_UInt          blue_count;
+    AF_LatinBlueRec  blues[AF_BLUE_STRINGSET_MAX];
+
+    FT_Fixed         org_scale;
+    FT_Pos           org_delta;
+
+  } AF_LatinAxisRec, *AF_LatinAxis;
+
+
+  typedef struct  AF_LatinMetricsRec_
+  {
+    AF_StyleMetricsRec  root;
+    FT_UInt             units_per_em;
+    AF_LatinAxisRec     axis[AF_DIMENSION_MAX];
+
+  } AF_LatinMetricsRec, *AF_LatinMetrics;
+
+
+  FT_LOCAL( FT_Error )
+  af_latin_metrics_init( AF_LatinMetrics  metrics,
+                         FT_Face          face );
+
+  FT_LOCAL( void )
+  af_latin_metrics_scale( AF_LatinMetrics  metrics,
+                          AF_Scaler        scaler );
+
+  FT_LOCAL( void )
+  af_latin_metrics_init_widths( AF_LatinMetrics  metrics,
+                                FT_Face          face );
+
+  FT_LOCAL( void )
+  af_latin_metrics_check_digits( AF_LatinMetrics  metrics,
+                                 FT_Face          face );
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****           L A T I N   G L Y P H   A N A L Y S I S             *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+#define AF_LATIN_HINTS_HORZ_SNAP    ( 1U << 0 ) /* stem width snapping  */
+#define AF_LATIN_HINTS_VERT_SNAP    ( 1U << 1 ) /* stem height snapping */
+#define AF_LATIN_HINTS_STEM_ADJUST  ( 1U << 2 ) /* stem width/height    */
+                                                /* adjustment           */
+#define AF_LATIN_HINTS_MONO         ( 1U << 3 ) /* monochrome rendering */
+
+
+#define AF_LATIN_HINTS_DO_HORZ_SNAP( h )             \
+  AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_HORZ_SNAP )
+
+#define AF_LATIN_HINTS_DO_VERT_SNAP( h )             \
+  AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_VERT_SNAP )
+
+#define AF_LATIN_HINTS_DO_STEM_ADJUST( h )             \
+  AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_STEM_ADJUST )
+
+#define AF_LATIN_HINTS_DO_MONO( h )             \
+  AF_HINTS_TEST_OTHER( h, AF_LATIN_HINTS_MONO )
+
+
+  /*
+   *  The next functions shouldn't normally be exported.  However, other
+   *  writing systems might like to use these functions as-is.
+   */
+  FT_LOCAL( FT_Error )
+  af_latin_hints_compute_segments( AF_GlyphHints  hints,
+                                   AF_Dimension   dim );
+
+  FT_LOCAL( void )
+  af_latin_hints_link_segments( AF_GlyphHints  hints,
+                                FT_UInt        width_count,
+                                AF_WidthRec*   widths,
+                                AF_Dimension   dim );
+
+  FT_LOCAL( FT_Error )
+  af_latin_hints_compute_edges( AF_GlyphHints  hints,
+                                AF_Dimension   dim );
+
+  FT_LOCAL( FT_Error )
+  af_latin_hints_detect_features( AF_GlyphHints  hints,
+                                  FT_UInt        width_count,
+                                  AF_WidthRec*   widths,
+                                  AF_Dimension   dim );
+
+/* */
+
+FT_END_HEADER
+
+#endif /* AFLATIN_H_ */
+
+
+/* END */

data/vendor/git.savannah.nongnu.org/r/freetype/freetype2/src/autofit/aflatin2.c

@@ -0,0 +1,2427 @@
+/* ATTENTION: This file doesn't compile.  It is only here as a reference */
+/*            of an alternative latin hinting algorithm that was always  */
+/*            marked as experimental.                                    */
+
+
+/***************************************************************************/
+/*                                                                         */
+/*  aflatin2.c                                                             */
+/*                                                                         */
+/*    Auto-fitter hinting routines for latin writing system (body).        */
+/*                                                                         */
+/*  Copyright 2003-2018 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#include FT_ADVANCES_H
+
+
+#ifdef FT_OPTION_AUTOFIT2
+
+#include "afglobal.h"
+#include "aflatin.h"
+#include "aflatin2.h"
+#include "aferrors.h"
+
+
+#ifdef AF_CONFIG_OPTION_USE_WARPER
+#include "afwarp.h"
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* The macro FT_COMPONENT is used in trace mode.  It is an implicit      */
+  /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log  */
+  /* messages during execution.                                            */
+  /*                                                                       */
+#undef  FT_COMPONENT
+#define FT_COMPONENT  trace_aflatin2
+
+
+  FT_LOCAL_DEF( FT_Error )
+  af_latin2_hints_compute_segments( AF_GlyphHints  hints,
+                                    AF_Dimension   dim );
+
+  FT_LOCAL_DEF( void )
+  af_latin2_hints_link_segments( AF_GlyphHints  hints,
+                                 AF_Dimension   dim );
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****            L A T I N   G L O B A L   M E T R I C S            *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+  FT_LOCAL_DEF( void )
+  af_latin2_metrics_init_widths( AF_LatinMetrics  metrics,
+                                 FT_Face          face )
+  {
+    /* scan the array of segments in each direction */
+    AF_GlyphHintsRec  hints[1];
+
+
+    af_glyph_hints_init( hints, face->memory );
+
+    metrics->axis[AF_DIMENSION_HORZ].width_count = 0;
+    metrics->axis[AF_DIMENSION_VERT].width_count = 0;
+
+    {
+      FT_Error             error;
+      FT_UInt              glyph_index;
+      int                  dim;
+      AF_LatinMetricsRec   dummy[1];
+      AF_Scaler            scaler = &dummy->root.scaler;
+
+
+      glyph_index = FT_Get_Char_Index(
+                      face,
+                      metrics->root.style_class->standard_char );
+      if ( glyph_index == 0 )
+        goto Exit;
+
+      error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
+      if ( error || face->glyph->outline.n_points <= 0 )
+        goto Exit;
+
+      FT_ZERO( dummy );
+
+      dummy->units_per_em = metrics->units_per_em;
+      scaler->x_scale     = scaler->y_scale = 0x10000L;
+      scaler->x_delta     = scaler->y_delta = 0;
+      scaler->face        = face;
+      scaler->render_mode = FT_RENDER_MODE_NORMAL;
+      scaler->flags       = 0;
+
+      af_glyph_hints_rescale( hints, (AF_StyleMetrics)dummy );
+
+      error = af_glyph_hints_reload( hints, &face->glyph->outline );
+      if ( error )
+        goto Exit;
+
+      for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
+      {
+        AF_LatinAxis  axis    = &metrics->axis[dim];
+        AF_AxisHints  axhints = &hints->axis[dim];
+        AF_Segment    seg, limit, link;
+        FT_UInt       num_widths = 0;
+
+
+        error = af_latin2_hints_compute_segments( hints,
+                                                 (AF_Dimension)dim );
+        if ( error )
+          goto Exit;
+
+        af_latin2_hints_link_segments( hints,
+                                      (AF_Dimension)dim );
+
+        seg   = axhints->segments;
+        limit = seg + axhints->num_segments;
+
+        for ( ; seg < limit; seg++ )
+        {
+          link = seg->link;
+
+          /* we only consider stem segments there! */
+          if ( link && link->link == seg && link > seg )
+          {
+            FT_Pos  dist;
+
+
+            dist = seg->pos - link->pos;
+            if ( dist < 0 )
+              dist = -dist;
+
+            if ( num_widths < AF_LATIN_MAX_WIDTHS )
+              axis->widths[num_widths++].org = dist;
+          }
+        }
+
+        af_sort_widths( num_widths, axis->widths );
+        axis->width_count = num_widths;
+      }
+
+  Exit:
+      for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
+      {
+        AF_LatinAxis  axis = &metrics->axis[dim];
+        FT_Pos        stdw;
+
+
+        stdw = ( axis->width_count > 0 )
+                 ? axis->widths[0].org
+                 : AF_LATIN_CONSTANT( metrics, 50 );
+
+        /* let's try 20% of the smallest width */
+        axis->edge_distance_threshold = stdw / 5;
+        axis->standard_width          = stdw;
+        axis->extra_light             = 0;
+      }
+    }
+
+    af_glyph_hints_done( hints );
+  }
+
+
+
+#define AF_LATIN_MAX_TEST_CHARACTERS  12
+
+
+  static const char af_latin2_blue_chars[AF_LATIN_MAX_BLUES]
+                                        [AF_LATIN_MAX_TEST_CHARACTERS+1] =
+  {
+    "THEZOCQS",
+    "HEZLOCUS",
+    "fijkdbh",
+    "xzroesc",
+    "xzroesc",
+    "pqgjy"
+  };
+
+
+  static void
+  af_latin2_metrics_init_blues( AF_LatinMetrics  metrics,
+                                FT_Face          face )
+  {
+    FT_Pos        flats [AF_LATIN_MAX_TEST_CHARACTERS];
+    FT_Pos        rounds[AF_LATIN_MAX_TEST_CHARACTERS];
+    FT_Int        num_flats;
+    FT_Int        num_rounds;
+    FT_Int        bb;
+    AF_LatinBlue  blue;
+    FT_Error      error;
+    AF_LatinAxis  axis  = &metrics->axis[AF_DIMENSION_VERT];
+    FT_GlyphSlot  glyph = face->glyph;
+
+
+    /* we compute the blues simply by loading each character from the     */
+    /* 'af_latin2_blue_chars[blues]' string, then compute its top-most or */
+    /* bottom-most points (depending on `AF_IS_TOP_BLUE')                 */
+
+    FT_TRACE5(( "blue zones computation\n"
+                "======================\n\n" ));
+
+    for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ )
+    {
+      const char*  p     = af_latin2_blue_chars[bb];
+      const char*  limit = p + AF_LATIN_MAX_TEST_CHARACTERS;
+      FT_Pos*      blue_ref;
+      FT_Pos*      blue_shoot;
+
+
+      FT_TRACE5(( "blue zone %d:\n", bb ));
+
+      num_flats  = 0;
+      num_rounds = 0;
+
+      for ( ; p < limit && *p; p++ )
+      {
+        FT_UInt     glyph_index;
+        FT_Int      best_point, best_y, best_first, best_last;
+        FT_Vector*  points;
+        FT_Bool     round;
+
+
+        /* load the character in the face -- skip unknown or empty ones */
+        glyph_index = FT_Get_Char_Index( face, (FT_UInt)*p );
+        if ( glyph_index == 0 )
+          continue;
+
+        error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE );
+        if ( error || glyph->outline.n_points <= 0 )
+          continue;
+
+        /* now compute min or max point indices and coordinates */
+        points      = glyph->outline.points;
+        best_point  = -1;
+        best_y      = 0;  /* make compiler happy */
+        best_first  = 0;  /* ditto */
+        best_last   = 0;  /* ditto */
+
+        {
+          FT_Int  nn;
+          FT_Int  first = 0;
+          FT_Int  last  = -1;
+
+
+          for ( nn = 0; nn < glyph->outline.n_contours; first = last+1, nn++ )
+          {
+            FT_Int  old_best_point = best_point;
+            FT_Int  pp;
+
+
+            last = glyph->outline.contours[nn];
+
+            /* Avoid single-point contours since they are never rasterized. */
+            /* In some fonts, they correspond to mark attachment points     */
+            /* which are way outside of the glyph's real outline.           */
+            if ( last == first )
+                continue;
+
+            if ( AF_LATIN_IS_TOP_BLUE( bb ) )
+            {
+              for ( pp = first; pp <= last; pp++ )
+                if ( best_point < 0 || points[pp].y > best_y )
+                {
+                  best_point = pp;
+                  best_y     = points[pp].y;
+                }
+            }
+            else
+            {
+              for ( pp = first; pp <= last; pp++ )
+                if ( best_point < 0 || points[pp].y < best_y )
+                {
+                  best_point = pp;
+                  best_y     = points[pp].y;
+                }
+            }
+
+            if ( best_point != old_best_point )
+            {
+              best_first = first;
+              best_last  = last;
+            }
+          }
+          FT_TRACE5(( "  %c  %d", *p, best_y ));
+        }
+
+        /* now check whether the point belongs to a straight or round   */
+        /* segment; we first need to find in which contour the extremum */
+        /* lies, then inspect its previous and next points              */
+        {
+          FT_Pos  best_x = points[best_point].x;
+          FT_Int  start, end, prev, next;
+          FT_Pos  dist;
+
+
+          /* now look for the previous and next points that are not on the */
+          /* same Y coordinate.  Threshold the `closeness'...              */
+          start = end = best_point;
+
+          do
+          {
+            prev = start - 1;
+            if ( prev < best_first )
+              prev = best_last;
+
+            dist = FT_ABS( points[prev].y - best_y );
+            /* accept a small distance or a small angle (both values are */
+            /* heuristic; value 20 corresponds to approx. 2.9 degrees)   */
+            if ( dist > 5 )
+              if ( FT_ABS( points[prev].x - best_x ) <= 20 * dist )
+                break;
+
+            start = prev;
+
+          } while ( start != best_point );
+
+          do
+          {
+            next = end + 1;
+            if ( next > best_last )
+              next = best_first;
+
+            dist = FT_ABS( points[next].y - best_y );
+            if ( dist > 5 )
+              if ( FT_ABS( points[next].x - best_x ) <= 20 * dist )
+                break;
+
+            end = next;
+
+          } while ( end != best_point );
+
+          /* now, set the `round' flag depending on the segment's kind */
+          round = FT_BOOL(
+            FT_CURVE_TAG( glyph->outline.tags[start] ) != FT_CURVE_TAG_ON ||
+            FT_CURVE_TAG( glyph->outline.tags[ end ] ) != FT_CURVE_TAG_ON );
+
+          FT_TRACE5(( " (%s)\n", round ? "round" : "flat" ));
+        }
+
+        if ( round )
+          rounds[num_rounds++] = best_y;
+        else
+          flats[num_flats++]   = best_y;
+      }
+
+      if ( num_flats == 0 && num_rounds == 0 )
+      {
+        /*
+         *  we couldn't find a single glyph to compute this blue zone,
+         *  we will simply ignore it then
+         */
+        FT_TRACE5(( "  empty\n" ));
+        continue;
+      }
+
+      /* we have computed the contents of the `rounds' and `flats' tables, */
+      /* now determine the reference and overshoot position of the blue -- */
+      /* we simply take the median value after a simple sort               */
+      af_sort_pos( num_rounds, rounds );
+      af_sort_pos( num_flats,  flats );
+
+      blue       = & axis->blues[axis->blue_count];
+      blue_ref   = & blue->ref.org;
+      blue_shoot = & blue->shoot.org;
+
+      axis->blue_count++;
+
+      if ( num_flats == 0 )
+      {
+        *blue_ref   =
+        *blue_shoot = rounds[num_rounds / 2];
+      }
+      else if ( num_rounds == 0 )
+      {
+        *blue_ref   =
+        *blue_shoot = flats[num_flats / 2];
+      }
+      else
+      {
+        *blue_ref   = flats[num_flats / 2];
+        *blue_shoot = rounds[num_rounds / 2];
+      }
+
+      /* there are sometimes problems: if the overshoot position of top     */
+      /* zones is under its reference position, or the opposite for bottom  */
+      /* zones.  We must thus check everything there and correct the errors */
+      if ( *blue_shoot != *blue_ref )
+      {
+        FT_Pos   ref      = *blue_ref;
+        FT_Pos   shoot    = *blue_shoot;
+        FT_Bool  over_ref = FT_BOOL( shoot > ref );
+
+
+        if ( AF_LATIN_IS_TOP_BLUE( bb ) ^ over_ref )
+        {
+          *blue_ref   =
+          *blue_shoot = ( shoot + ref ) / 2;
+
+          FT_TRACE5(( "  [overshoot smaller than reference,"
+                      " taking mean value]\n" ));
+        }
+      }
+
+      blue->flags = 0;
+      if ( AF_LATIN_IS_TOP_BLUE( bb ) )
+        blue->flags |= AF_LATIN_BLUE_TOP;
+
+      /*
+       * The following flag is used later to adjust the y and x scales
+       * in order to optimize the pixel grid alignment of the top of small
+       * letters.
+       */
+      if ( AF_LATIN_IS_X_HEIGHT_BLUE( bb ) )
+        blue->flags |= AF_LATIN_BLUE_ADJUSTMENT;
+
+      FT_TRACE5(( "    -> reference = %ld\n"
+                  "       overshoot = %ld\n",
+                  *blue_ref, *blue_shoot ));
+    }
+
+    return;
+  }
+
+
+  FT_LOCAL_DEF( void )
+  af_latin2_metrics_check_digits( AF_LatinMetrics  metrics,
+                                  FT_Face          face )
+  {
+    FT_UInt   i;
+    FT_Bool   started = 0, same_width = 1;
+    FT_Fixed  advance, old_advance = 0;
+
+
+    /* check whether all ASCII digits have the same advance width; */
+    /* digit `0' is 0x30 in all supported charmaps                 */
+    for ( i = 0x30; i <= 0x39; i++ )
+    {
+      FT_UInt  glyph_index;
+
+
+      glyph_index = FT_Get_Char_Index( face, i );
+      if ( glyph_index == 0 )
+        continue;
+
+      if ( FT_Get_Advance( face, glyph_index,
+                           FT_LOAD_NO_SCALE         |
+                           FT_LOAD_NO_HINTING       |
+                           FT_LOAD_IGNORE_TRANSFORM,
+                           &advance ) )
+        continue;
+
+      if ( started )
+      {
+        if ( advance != old_advance )
+        {
+          same_width = 0;
+          break;
+        }
+      }
+      else
+      {
+        old_advance = advance;
+        started     = 1;
+      }
+    }
+
+    metrics->root.digits_have_same_width = same_width;
+  }
+
+
+  FT_LOCAL_DEF( FT_Error )
+  af_latin2_metrics_init( AF_LatinMetrics  metrics,
+                          FT_Face          face )
+  {
+    FT_Error    error  = FT_Err_Ok;
+    FT_CharMap  oldmap = face->charmap;
+    FT_UInt     ee;
+
+    static const FT_Encoding  latin_encodings[] =
+    {
+      FT_ENCODING_UNICODE,
+      FT_ENCODING_APPLE_ROMAN,
+      FT_ENCODING_ADOBE_STANDARD,
+      FT_ENCODING_ADOBE_LATIN_1,
+      FT_ENCODING_NONE  /* end of list */
+    };
+
+
+    metrics->units_per_em = face->units_per_EM;
+
+    /* do we have a latin charmap in there? */
+    for ( ee = 0; latin_encodings[ee] != FT_ENCODING_NONE; ee++ )
+    {
+      error = FT_Select_Charmap( face, latin_encodings[ee] );
+      if ( !error )
+        break;
+    }
+
+    if ( !error )
+    {
+      af_latin2_metrics_init_widths( metrics, face );
+      af_latin2_metrics_init_blues( metrics, face );
+      af_latin2_metrics_check_digits( metrics, face );
+    }
+
+    FT_Set_Charmap( face, oldmap );
+    return FT_Err_Ok;
+  }
+
+
+  static void
+  af_latin2_metrics_scale_dim( AF_LatinMetrics  metrics,
+                               AF_Scaler        scaler,
+                               AF_Dimension     dim )
+  {
+    FT_Fixed      scale;
+    FT_Pos        delta;
+    AF_LatinAxis  axis;
+    FT_UInt       nn;
+
+
+    if ( dim == AF_DIMENSION_HORZ )
+    {
+      scale = scaler->x_scale;
+      delta = scaler->x_delta;
+    }
+    else
+    {
+      scale = scaler->y_scale;
+      delta = scaler->y_delta;
+    }
+
+    axis = &metrics->axis[dim];
+
+    if ( axis->org_scale == scale && axis->org_delta == delta )
+      return;
+
+    axis->org_scale = scale;
+    axis->org_delta = delta;
+
+    /*
+     * correct Y scale to optimize the alignment of the top of small
+     * letters to the pixel grid
+     */
+    if ( dim == AF_DIMENSION_VERT )
+    {
+      AF_LatinAxis  vaxis = &metrics->axis[AF_DIMENSION_VERT];
+      AF_LatinBlue  blue = NULL;
+
+
+      for ( nn = 0; nn < vaxis->blue_count; nn++ )
+      {
+        if ( vaxis->blues[nn].flags & AF_LATIN_BLUE_ADJUSTMENT )
+        {
+          blue = &vaxis->blues[nn];
+          break;
+        }
+      }
+
+      if ( blue )
+      {
+        FT_Pos   scaled;
+        FT_Pos   threshold;
+        FT_Pos   fitted;
+        FT_UInt  limit;
+        FT_UInt  ppem;
+
+
+        scaled    = FT_MulFix( blue->shoot.org, scaler->y_scale );
+        ppem      = metrics->root.scaler.face->size->metrics.x_ppem;
+        limit     = metrics->root.globals->increase_x_height;
+        threshold = 40;
+
+        /* if the `increase-x-height' property is active, */
+        /* we round up much more often                    */
+        if ( limit                                 &&
+             ppem <= limit                         &&
+             ppem >= AF_PROP_INCREASE_X_HEIGHT_MIN )
+          threshold = 52;
+
+        fitted = ( scaled + threshold ) & ~63;
+
+#if 1
+        if ( scaled != fitted )
+        {
+          scale = FT_MulDiv( scale, fitted, scaled );
+          FT_TRACE5(( "== scaled x-top = %.2g"
+                      "  fitted = %.2g, scaling = %.4g\n",
+                      scaled / 64.0, fitted / 64.0,
+                      ( fitted * 1.0 ) / scaled ));
+        }
+#endif
+      }
+    }
+
+    axis->scale = scale;
+    axis->delta = delta;
+
+    if ( dim == AF_DIMENSION_HORZ )
+    {
+      metrics->root.scaler.x_scale = scale;
+      metrics->root.scaler.x_delta = delta;
+    }
+    else
+    {
+      metrics->root.scaler.y_scale = scale;
+      metrics->root.scaler.y_delta = delta;
+    }
+
+    /* scale the standard widths */
+    for ( nn = 0; nn < axis->width_count; nn++ )
+    {
+      AF_Width  width = axis->widths + nn;
+
+
+      width->cur = FT_MulFix( width->org, scale );
+      width->fit = width->cur;
+    }
+
+    /* an extra-light axis corresponds to a standard width that is */
+    /* smaller than 5/8 pixels                                     */
+    axis->extra_light =
+      (FT_Bool)( FT_MulFix( axis->standard_width, scale ) < 32 + 8 );
+
+    if ( dim == AF_DIMENSION_VERT )
+    {
+      /* scale the blue zones */
+      for ( nn = 0; nn < axis->blue_count; nn++ )
+      {
+        AF_LatinBlue  blue = &axis->blues[nn];
+        FT_Pos        dist;
+
+
+        blue->ref.cur   = FT_MulFix( blue->ref.org, scale ) + delta;
+        blue->ref.fit   = blue->ref.cur;
+        blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta;
+        blue->shoot.fit = blue->shoot.cur;
+        blue->flags    &= ~AF_LATIN_BLUE_ACTIVE;
+
+        /* a blue zone is only active if it is less than 3/4 pixels tall */
+        dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale );
+        if ( dist <= 48 && dist >= -48 )
+        {
+          FT_Pos  delta1, delta2;
+
+          delta1 = blue->shoot.org - blue->ref.org;
+          delta2 = delta1;
+          if ( delta1 < 0 )
+            delta2 = -delta2;
+
+          delta2 = FT_MulFix( delta2, scale );
+
+          if ( delta2 < 32 )
+            delta2 = 0;
+          else if ( delta2 < 64 )
+            delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 );
+          else
+            delta2 = FT_PIX_ROUND( delta2 );
+
+          if ( delta1 < 0 )
+            delta2 = -delta2;
+
+          blue->ref.fit   = FT_PIX_ROUND( blue->ref.cur );
+          blue->shoot.fit = blue->ref.fit + delta2;
+
+          FT_TRACE5(( ">> activating blue zone %d:"
+                      "  ref.cur=%.2g ref.fit=%.2g"
+                      "  shoot.cur=%.2g shoot.fit=%.2g\n",
+                      nn, blue->ref.cur / 64.0, blue->ref.fit / 64.0,
+                      blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 ));
+
+          blue->flags |= AF_LATIN_BLUE_ACTIVE;
+        }
+      }
+    }
+  }
+
+
+  FT_LOCAL_DEF( void )
+  af_latin2_metrics_scale( AF_LatinMetrics  metrics,
+                           AF_Scaler        scaler )
+  {
+    metrics->root.scaler.render_mode = scaler->render_mode;
+    metrics->root.scaler.face        = scaler->face;
+    metrics->root.scaler.flags       = scaler->flags;
+
+    af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ );
+    af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT );
+  }
+
+
+  /* Extract standard_width from writing system/script specific */
+  /* metrics class.                                             */
+
+  FT_LOCAL_DEF( void )
+  af_latin2_get_standard_widths( AF_LatinMetrics  metrics,
+                                 FT_Pos*          stdHW,
+                                 FT_Pos*          stdVW )
+  {
+    if ( stdHW )
+      *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width;
+
+    if ( stdVW )
+      *stdVW = metrics->axis[AF_DIMENSION_HORZ].standard_width;
+  }
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****           L A T I N   G L Y P H   A N A L Y S I S             *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+#define  SORT_SEGMENTS
+
+  FT_LOCAL_DEF( FT_Error )
+  af_latin2_hints_compute_segments( AF_GlyphHints  hints,
+                                    AF_Dimension   dim )
+  {
+    AF_AxisHints  axis          = &hints->axis[dim];
+    FT_Memory     memory        = hints->memory;
+    FT_Error      error         = FT_Err_Ok;
+    AF_Segment    segment       = NULL;
+    AF_SegmentRec seg0;
+    AF_Point*     contour       = hints->contours;
+    AF_Point*     contour_limit = contour + hints->num_contours;
+    AF_Direction  major_dir, segment_dir;
+
+
+    FT_ZERO( &seg0 );
+    seg0.score = 32000;
+    seg0.flags = AF_EDGE_NORMAL;
+
+    major_dir   = (AF_Direction)FT_ABS( axis->major_dir );
+    segment_dir = major_dir;
+
+    axis->num_segments = 0;
+
+    /* set up (u,v) in each point */
+    if ( dim == AF_DIMENSION_HORZ )
+    {
+      AF_Point  point = hints->points;
+      AF_Point  limit = point + hints->num_points;
+
+
+      for ( ; point < limit; point++ )
+      {
+        point->u = point->fx;
+        point->v = point->fy;
+      }
+    }
+    else
+    {
+      AF_Point  point = hints->points;
+      AF_Point  limit = point + hints->num_points;
+
+
+      for ( ; point < limit; point++ )
+      {
+        point->u = point->fy;
+        point->v = point->fx;
+      }
+    }
+
+    /* do each contour separately */
+    for ( ; contour < contour_limit; contour++ )
+    {
+      AF_Point  point   =  contour[0];
+      AF_Point  start   =  point;
+      AF_Point  last    =  point->prev;
+
+
+      if ( point == last )  /* skip singletons -- just in case */
+        continue;
+
+      /* already on an edge ?, backtrack to find its start */
+      if ( FT_ABS( point->in_dir ) == major_dir )
+      {
+        point = point->prev;
+
+        while ( point->in_dir == start->in_dir )
+          point = point->prev;
+      }
+      else  /* otherwise, find first segment start, if any */
+      {
+        while ( FT_ABS( point->out_dir ) != major_dir )
+        {
+          point = point->next;
+
+          if ( point == start )
+            goto NextContour;
+        }
+      }
+
+      start = point;
+
+      for  (;;)
+      {
+        AF_Point  first;
+        FT_Pos    min_u, min_v, max_u, max_v;
+
+        /* we're at the start of a new segment */
+        FT_ASSERT( FT_ABS( point->out_dir ) == major_dir &&
+                           point->in_dir != point->out_dir );
+        first = point;
+
+        min_u = max_u = point->u;
+        min_v = max_v = point->v;
+
+        point = point->next;
+
+        while ( point->out_dir == first->out_dir )
+        {
+          point = point->next;
+
+          if ( point->u < min_u )
+            min_u = point->u;
+
+          if ( point->u > max_u )
+            max_u = point->u;
+        }
+
+        if ( point->v < min_v )
+          min_v = point->v;
+
+        if ( point->v > max_v )
+          max_v = point->v;
+
+        /* record new segment */
+        error = af_axis_hints_new_segment( axis, memory, &segment );
+        if ( error )
+          goto Exit;
+
+        segment[0]         = seg0;
+        segment->dir       = first->out_dir;
+        segment->first     = first;
+        segment->last      = point;
+        segment->pos       = (FT_Short)( ( min_u + max_u ) >> 1 );
+        segment->min_coord = (FT_Short) min_v;
+        segment->max_coord = (FT_Short) max_v;
+        segment->height    = (FT_Short)( max_v - min_v );
+
+        /* a segment is round if it doesn't have successive */
+        /* on-curve points.                                 */
+        {
+          AF_Point  pt   = first;
+          AF_Point  last = point;
+          FT_UInt   f0   = pt->flags & AF_FLAG_CONTROL;
+          FT_UInt   f1;
+
+
+          segment->flags &= ~AF_EDGE_ROUND;
+
+          for ( ; pt != last; f0 = f1 )
+          {
+            pt = pt->next;
+            f1 = pt->flags & AF_FLAG_CONTROL;
+
+            if ( !f0 && !f1 )
+              break;
+
+            if ( pt == last )
+              segment->flags |= AF_EDGE_ROUND;
+          }
+        }
+
+       /* this can happen in the case of a degenerate contour
+        * e.g. a 2-point vertical contour
+        */
+        if ( point == start )
+          break;
+
+        /* jump to the start of the next segment, if any */
+        while ( FT_ABS( point->out_dir ) != major_dir )
+        {
+          point = point->next;
+
+          if ( point == start )
+            goto NextContour;
+        }
+      }
+
+    NextContour:
+      ;
+    } /* contours */
+
+    /* now slightly increase the height of segments when this makes */
+    /* sense -- this is used to better detect and ignore serifs     */
+    {
+      AF_Segment  segments     = axis->segments;
+      AF_Segment  segments_end = segments + axis->num_segments;
+
+
+      for ( segment = segments; segment < segments_end; segment++ )
+      {
+        AF_Point  first   = segment->first;
+        AF_Point  last    = segment->last;
+        AF_Point  p;
+        FT_Pos    first_v = first->v;
+        FT_Pos    last_v  = last->v;
+
+
+        if ( first_v < last_v )
+        {
+          p = first->prev;
+          if ( p->v < first_v )
+            segment->height = (FT_Short)( segment->height +
+                                          ( ( first_v - p->v ) >> 1 ) );
+
+          p = last->next;
+          if ( p->v > last_v )
+            segment->height = (FT_Short)( segment->height +
+                                          ( ( p->v - last_v ) >> 1 ) );
+        }
+        else
+        {
+          p = first->prev;
+          if ( p->v > first_v )
+            segment->height = (FT_Short)( segment->height +
+                                          ( ( p->v - first_v ) >> 1 ) );
+
+          p = last->next;
+          if ( p->v < last_v )
+            segment->height = (FT_Short)( segment->height +
+                                          ( ( last_v - p->v ) >> 1 ) );
+        }
+      }
+    }
+
+#ifdef AF_SORT_SEGMENTS
+   /* place all segments with a negative direction to the start
+    * of the array, used to speed up segment linking later...
+    */
+    {
+      AF_Segment  segments = axis->segments;
+      FT_UInt     count    = axis->num_segments;
+      FT_UInt     ii, jj;
+
+      for ( ii = 0; ii < count; ii++ )
+      {
+        if ( segments[ii].dir > 0 )
+        {
+          for ( jj = ii + 1; jj < count; jj++ )
+          {
+            if ( segments[jj].dir < 0 )
+            {
+              AF_SegmentRec  tmp;
+
+
+              tmp          = segments[ii];
+              segments[ii] = segments[jj];
+              segments[jj] = tmp;
+
+              break;
+            }
+          }
+
+          if ( jj == count )
+            break;
+        }
+      }
+      axis->mid_segments = ii;
+    }
+#endif
+
+  Exit:
+    return error;
+  }
+
+
+  FT_LOCAL_DEF( void )
+  af_latin2_hints_link_segments( AF_GlyphHints  hints,
+                                 AF_Dimension   dim )
+  {
+    AF_AxisHints  axis          = &hints->axis[dim];
+    AF_Segment    segments      = axis->segments;
+    AF_Segment    segment_limit = segments + axis->num_segments;
+#ifdef AF_SORT_SEGMENTS
+    AF_Segment    segment_mid   = segments + axis->mid_segments;
+#endif
+    FT_Pos        len_threshold, len_score;
+    AF_Segment    seg1, seg2;
+
+
+    len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 );
+    if ( len_threshold == 0 )
+      len_threshold = 1;
+
+    len_score = AF_LATIN_CONSTANT( hints->metrics, 6000 );
+
+#ifdef AF_SORT_SEGMENTS
+    for ( seg1 = segments; seg1 < segment_mid; seg1++ )
+    {
+      if ( seg1->dir != axis->major_dir )
+        continue;
+
+      for ( seg2 = segment_mid; seg2 < segment_limit; seg2++ )
+#else
+    /* now compare each segment to the others */
+    for ( seg1 = segments; seg1 < segment_limit; seg1++ )
+    {
+      if ( seg1->dir != axis->major_dir )
+        continue;
+
+      for ( seg2 = segments; seg2 < segment_limit; seg2++ )
+        if ( seg1->dir + seg2->dir == 0 && seg2->pos > seg1->pos )
+#endif
+        {
+          FT_Pos  pos1 = seg1->pos;
+          FT_Pos  pos2 = seg2->pos;
+          FT_Pos  dist = pos2 - pos1;
+
+
+          if ( dist < 0 )
+            continue;
+
+          {
+            FT_Pos  min = seg1->min_coord;
+            FT_Pos  max = seg1->max_coord;
+            FT_Pos  len, score;
+
+
+            if ( min < seg2->min_coord )
+              min = seg2->min_coord;
+
+            if ( max > seg2->max_coord )
+              max = seg2->max_coord;
+
+            len = max - min;
+            if ( len >= len_threshold )
+            {
+              score = dist + len_score / len;
+              if ( score < seg1->score )
+              {
+                seg1->score = score;
+                seg1->link  = seg2;
+              }
+
+              if ( score < seg2->score )
+              {
+                seg2->score = score;
+                seg2->link  = seg1;
+              }
+            }
+          }
+        }
+    }
+#if 0
+    }
+#endif
+
+    /* now, compute the `serif' segments */
+    for ( seg1 = segments; seg1 < segment_limit; seg1++ )
+    {
+      seg2 = seg1->link;
+
+      if ( seg2 )
+      {
+        if ( seg2->link != seg1 )
+        {
+          seg1->link  = NULL;
+          seg1->serif = seg2->link;
+        }
+      }
+    }
+  }
+
+
+  FT_LOCAL_DEF( FT_Error )
+  af_latin2_hints_compute_edges( AF_GlyphHints  hints,
+                                 AF_Dimension   dim )
+  {
+    AF_AxisHints  axis   = &hints->axis[dim];
+    FT_Error      error  = FT_Err_Ok;
+    FT_Memory     memory = hints->memory;
+    AF_LatinAxis  laxis  = &((AF_LatinMetrics)hints->metrics)->axis[dim];
+
+    AF_Segment    segments      = axis->segments;
+    AF_Segment    segment_limit = segments + axis->num_segments;
+    AF_Segment    seg;
+
+    AF_Direction  up_dir;
+    FT_Fixed      scale;
+    FT_Pos        edge_distance_threshold;
+    FT_Pos        segment_length_threshold;
+
+
+    axis->num_edges = 0;
+
+    scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale
+                                         : hints->y_scale;
+
+    up_dir = ( dim == AF_DIMENSION_HORZ ) ? AF_DIR_UP
+                                          : AF_DIR_RIGHT;
+
+    /*
+     *  We want to ignore very small (mostly serif) segments, we do that
+     *  by ignoring those that whose length is less than a given fraction
+     *  of the standard width. If there is no standard width, we ignore
+     *  those that are less than a given size in pixels
+     *
+     *  also, unlink serif segments that are linked to segments farther
+     *  than 50% of the standard width
+     */
+    if ( dim == AF_DIMENSION_HORZ )
+    {
+      if ( laxis->width_count > 0 )
+        segment_length_threshold = ( laxis->standard_width * 10 ) >> 4;
+      else
+        segment_length_threshold = FT_DivFix( 64, hints->y_scale );
+    }
+    else
+      segment_length_threshold = 0;
+
+    /*********************************************************************/
+    /*                                                                   */
+    /* We will begin by generating a sorted table of edges for the       */
+    /* current direction.  To do so, we simply scan each segment and try */
+    /* to find an edge in our table that corresponds to its position.    */
+    /*                                                                   */
+    /* If no edge is found, we create and insert a new edge in the       */
+    /* sorted table.  Otherwise, we simply add the segment to the edge's */
+    /* list which will be processed in the second step to compute the    */
+    /* edge's properties.                                                */
+    /*                                                                   */
+    /* Note that the edges table is sorted along the segment/edge        */
+    /* position.                                                         */
+    /*                                                                   */
+    /*********************************************************************/
+
+    edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold,
+                                         scale );
+    if ( edge_distance_threshold > 64 / 4 )
+      edge_distance_threshold = 64 / 4;
+
+    edge_distance_threshold = FT_DivFix( edge_distance_threshold,
+                                         scale );
+
+    for ( seg = segments; seg < segment_limit; seg++ )
+    {
+      AF_Edge  found = NULL;
+      FT_Int   ee;
+
+
+      if ( seg->height < segment_length_threshold )
+        continue;
+
+      /* A special case for serif edges: If they are smaller than */
+      /* 1.5 pixels we ignore them.                               */
+      if ( seg->serif )
+      {
+        FT_Pos  dist = seg->serif->pos - seg->pos;
+
+
+        if ( dist < 0 )
+          dist = -dist;
+
+        if ( dist >= laxis->standard_width >> 1 )
+        {
+          /* unlink this serif, it is too distant from its reference stem */
+          seg->serif = NULL;
+        }
+        else if ( 2*seg->height < 3 * segment_length_threshold )
+          continue;
+      }
+
+      /* look for an edge corresponding to the segment */
+      for ( ee = 0; ee < axis->num_edges; ee++ )
+      {
+        AF_Edge  edge = axis->edges + ee;
+        FT_Pos   dist;
+
+
+        dist = seg->pos - edge->fpos;
+        if ( dist < 0 )
+          dist = -dist;
+
+        if ( dist < edge_distance_threshold && edge->dir == seg->dir )
+        {
+          found = edge;
+          break;
+        }
+      }
+
+      if ( !found )
+      {
+        AF_Edge   edge;
+
+
+        /* insert a new edge in the list and */
+        /* sort according to the position    */
+        error = af_axis_hints_new_edge( axis, seg->pos, seg->dir, 0,
+                                        memory, &edge );
+        if ( error )
+          goto Exit;
+
+        /* add the segment to the new edge's list */
+        FT_ZERO( edge );
+
+        edge->first    = seg;
+        edge->last     = seg;
+        edge->dir      = seg->dir;
+        edge->fpos     = seg->pos;
+        edge->opos     = FT_MulFix( seg->pos, scale );
+        edge->pos      = edge->opos;
+        seg->edge_next = seg;
+      }
+      else
+      {
+        /* if an edge was found, simply add the segment to the edge's */
+        /* list                                                       */
+        seg->edge_next         = found->first;
+        found->last->edge_next = seg;
+        found->last            = seg;
+      }
+    }
+
+
+    /*********************************************************************/
+    /*                                                                   */
+    /* Good, we will now compute each edge's properties according to     */
+    /* segments found on its position.  Basically, these are:            */
+    /*                                                                   */
+    /*  - edge's main direction                                          */
+    /*  - stem edge, serif edge or both (which defaults to stem then)    */
+    /*  - rounded edge, straight or both (which defaults to straight)    */
+    /*  - link for edge                                                  */
+    /*                                                                   */
+    /*********************************************************************/
+
+    /* first of all, set the `edge' field in each segment -- this is */
+    /* required in order to compute edge links                       */
+
+    /*
+     * Note that removing this loop and setting the `edge' field of each
+     * segment directly in the code above slows down execution speed for
+     * some reasons on platforms like the Sun.
+     */
+    {
+      AF_Edge  edges      = axis->edges;
+      AF_Edge  edge_limit = edges + axis->num_edges;
+      AF_Edge  edge;
+
+
+      for ( edge = edges; edge < edge_limit; edge++ )
+      {
+        seg = edge->first;
+        if ( seg )
+          do
+          {
+            seg->edge = edge;
+            seg       = seg->edge_next;
+
+          } while ( seg != edge->first );
+      }
+
+      /* now, compute each edge properties */
+      for ( edge = edges; edge < edge_limit; edge++ )
+      {
+        FT_Int  is_round    = 0;  /* does it contain round segments?    */
+        FT_Int  is_straight = 0;  /* does it contain straight segments? */
+#if 0
+        FT_Pos  ups         = 0;  /* number of upwards segments         */
+        FT_Pos  downs       = 0;  /* number of downwards segments       */
+#endif
+
+
+        seg = edge->first;
+
+        do
+        {
+          FT_Bool  is_serif;
+
+
+          /* check for roundness of segment */
+          if ( seg->flags & AF_EDGE_ROUND )
+            is_round++;
+          else
+            is_straight++;
+
+#if 0
+          /* check for segment direction */
+          if ( seg->dir == up_dir )
+            ups   += seg->max_coord-seg->min_coord;
+          else
+            downs += seg->max_coord-seg->min_coord;
+#endif
+
+          /* check for links -- if seg->serif is set, then seg->link must */
+          /* be ignored                                                   */
+          is_serif = (FT_Bool)( seg->serif               &&
+                                seg->serif->edge         &&
+                                seg->serif->edge != edge );
+
+          if ( ( seg->link && seg->link->edge ) || is_serif )
+          {
+            AF_Edge     edge2;
+            AF_Segment  seg2;
+
+
+            edge2 = edge->link;
+            seg2  = seg->link;
+
+            if ( is_serif )
+            {
+              seg2  = seg->serif;
+              edge2 = edge->serif;
+            }
+
+            if ( edge2 )
+            {
+              FT_Pos  edge_delta;
+              FT_Pos  seg_delta;
+
+
+              edge_delta = edge->fpos - edge2->fpos;
+              if ( edge_delta < 0 )
+                edge_delta = -edge_delta;
+
+              seg_delta = seg->pos - seg2->pos;
+              if ( seg_delta < 0 )
+                seg_delta = -seg_delta;
+
+              if ( seg_delta < edge_delta )
+                edge2 = seg2->edge;
+            }
+            else
+              edge2 = seg2->edge;
+
+            if ( is_serif )
+            {
+              edge->serif   = edge2;
+              edge2->flags |= AF_EDGE_SERIF;
+            }
+            else
+              edge->link  = edge2;
+          }
+
+          seg = seg->edge_next;
+
+        } while ( seg != edge->first );
+
+        /* set the round/straight flags */
+        edge->flags = AF_EDGE_NORMAL;
+
+        if ( is_round > 0 && is_round >= is_straight )
+          edge->flags |= AF_EDGE_ROUND;
+
+#if 0
+        /* set the edge's main direction */
+        edge->dir = AF_DIR_NONE;
+
+        if ( ups > downs )
+          edge->dir = (FT_Char)up_dir;
+
+        else if ( ups < downs )
+          edge->dir = (FT_Char)-up_dir;
+
+        else if ( ups == downs )
+          edge->dir = 0;  /* both up and down! */
+#endif
+
+        /* gets rid of serifs if link is set                */
+        /* XXX: This gets rid of many unpleasant artefacts! */
+        /*      Example: the `c' in cour.pfa at size 13     */
+
+        if ( edge->serif && edge->link )
+          edge->serif = NULL;
+      }
+    }
+
+  Exit:
+    return error;
+  }
+
+
+  FT_LOCAL_DEF( FT_Error )
+  af_latin2_hints_detect_features( AF_GlyphHints  hints,
+                                   AF_Dimension   dim )
+  {
+    FT_Error  error;
+
+
+    error = af_latin2_hints_compute_segments( hints, dim );
+    if ( !error )
+    {
+      af_latin2_hints_link_segments( hints, dim );
+
+      error = af_latin2_hints_compute_edges( hints, dim );
+    }
+    return error;
+  }
+
+
+  static void
+  af_latin2_hints_compute_blue_edges( AF_GlyphHints    hints,
+                                      AF_LatinMetrics  metrics )
+  {
+    AF_AxisHints  axis       = &hints->axis[AF_DIMENSION_VERT];
+    AF_Edge       edge       = axis->edges;
+    AF_Edge       edge_limit = edge + axis->num_edges;
+    AF_LatinAxis  latin      = &metrics->axis[AF_DIMENSION_VERT];
+    FT_Fixed      scale      = latin->scale;
+    FT_Pos        best_dist0;  /* initial threshold */
+
+
+    /* compute the initial threshold as a fraction of the EM size */
+    best_dist0 = FT_MulFix( metrics->units_per_em / 40, scale );
+
+    if ( best_dist0 > 64 / 2 )
+      best_dist0 = 64 / 2;
+
+    /* compute which blue zones are active, i.e. have their scaled */
+    /* size < 3/4 pixels                                           */
+
+    /* for each horizontal edge search the blue zone which is closest */
+    for ( ; edge < edge_limit; edge++ )
+    {
+      FT_Int    bb;
+      AF_Width  best_blue = NULL;
+      FT_Pos    best_dist = best_dist0;
+
+      for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ )
+      {
+        AF_LatinBlue  blue = latin->blues + bb;
+        FT_Bool       is_top_blue, is_major_dir;
+
+
+        /* skip inactive blue zones (i.e., those that are too small) */
+        if ( !( blue->flags & AF_LATIN_BLUE_ACTIVE ) )
+          continue;
+
+        /* if it is a top zone, check for right edges -- if it is a bottom */
+        /* zone, check for left edges                                      */
+        /*                                                                 */
+        /* of course, that's for TrueType                                  */
+        is_top_blue  = (FT_Byte)( ( blue->flags & AF_LATIN_BLUE_TOP ) != 0 );
+        is_major_dir = FT_BOOL( edge->dir == axis->major_dir );
+
+        /* if it is a top zone, the edge must be against the major    */
+        /* direction; if it is a bottom zone, it must be in the major */
+        /* direction                                                  */
+        if ( is_top_blue ^ is_major_dir )
+        {
+          FT_Pos     dist;
+          AF_Width   compare;
+
+
+          /* if it's a rounded edge, compare it to the overshoot position */
+          /* if it's a flat edge, compare it to the reference position    */
+          if ( edge->flags & AF_EDGE_ROUND )
+            compare = &blue->shoot;
+          else
+            compare = &blue->ref;
+
+          dist = edge->fpos - compare->org;
+          if ( dist < 0 )
+            dist = -dist;
+
+          dist = FT_MulFix( dist, scale );
+          if ( dist < best_dist )
+          {
+            best_dist = dist;
+            best_blue = compare;
+          }
+
+#if 0
+          /* now, compare it to the overshoot position if the edge is     */
+          /* rounded, and if the edge is over the reference position of a */
+          /* top zone, or under the reference position of a bottom zone   */
+          if ( edge->flags & AF_EDGE_ROUND && dist != 0 )
+          {
+            FT_Bool  is_under_ref = FT_BOOL( edge->fpos < blue->ref.org );
+
+
+            if ( is_top_blue ^ is_under_ref )
+            {
+              blue = latin->blues + bb;
+              dist = edge->fpos - blue->shoot.org;
+              if ( dist < 0 )
+                dist = -dist;
+
+              dist = FT_MulFix( dist, scale );
+              if ( dist < best_dist )
+              {
+                best_dist = dist;
+                best_blue = & blue->shoot;
+              }
+            }
+          }
+#endif
+        }
+      }
+
+      if ( best_blue )
+        edge->blue_edge = best_blue;
+    }
+  }
+
+
+  static FT_Error
+  af_latin2_hints_init( AF_GlyphHints    hints,
+                        AF_LatinMetrics  metrics )
+  {
+    FT_Render_Mode  mode;
+    FT_UInt32       scaler_flags, other_flags;
+    FT_Face         face = metrics->root.scaler.face;
+
+
+    af_glyph_hints_rescale( hints, (AF_StyleMetrics)metrics );
+
+    /*
+     *  correct x_scale and y_scale if needed, since they may have
+     *  been modified `af_latin2_metrics_scale_dim' above
+     */
+    hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale;
+    hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta;
+    hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale;
+    hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta;
+
+    /* compute flags depending on render mode, etc. */
+    mode = metrics->root.scaler.render_mode;
+
+#if 0 /* #ifdef AF_CONFIG_OPTION_USE_WARPER */
+    if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V )
+      metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL;
+#endif
+
+    scaler_flags = hints->scaler_flags;
+    other_flags  = 0;
+
+    /*
+     *  We snap the width of vertical stems for the monochrome and
+     *  horizontal LCD rendering targets only.
+     */
+    if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD )
+      other_flags |= AF_LATIN_HINTS_HORZ_SNAP;
+
+    /*
+     *  We snap the width of horizontal stems for the monochrome and
+     *  vertical LCD rendering targets only.
+     */
+    if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V )
+      other_flags |= AF_LATIN_HINTS_VERT_SNAP;
+
+    /*
+     *  We adjust stems to full pixels unless in `light' or `lcd' mode.
+     */
+    if ( mode != FT_RENDER_MODE_LIGHT && mode != FT_RENDER_MODE_LCD )
+      other_flags |= AF_LATIN_HINTS_STEM_ADJUST;
+
+    if ( mode == FT_RENDER_MODE_MONO )
+      other_flags |= AF_LATIN_HINTS_MONO;
+
+    /*
+     *  In `light' or `lcd' mode we disable horizontal hinting completely.
+     *  We also do it if the face is italic.
+     */
+    if ( mode == FT_RENDER_MODE_LIGHT || mode == FT_RENDER_MODE_LCD ||
+         ( face->style_flags & FT_STYLE_FLAG_ITALIC ) != 0          )
+      scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL;
+
+#ifdef AF_CONFIG_OPTION_USE_WARPER
+    /* get (global) warper flag */
+    if ( !metrics->root.globals->module->warping )
+      scaler_flags |= AF_SCALER_FLAG_NO_WARPER;
+#endif
+
+    hints->scaler_flags = scaler_flags;
+    hints->other_flags  = other_flags;
+
+    return 0;
+  }
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****        L A T I N   G L Y P H   G R I D - F I T T I N G        *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+  /* snap a given width in scaled coordinates to one of the */
+  /* current standard widths                                */
+
+  static FT_Pos
+  af_latin2_snap_width( AF_Width  widths,
+                        FT_UInt   count,
+                        FT_Pos    width )
+  {
+    FT_UInt  n;
+    FT_Pos   best      = 64 + 32 + 2;
+    FT_Pos   reference = width;
+    FT_Pos   scaled;
+
+
+    for ( n = 0; n < count; n++ )
+    {
+      FT_Pos  w;
+      FT_Pos  dist;
+
+
+      w = widths[n].cur;
+      dist = width - w;
+      if ( dist < 0 )
+        dist = -dist;
+      if ( dist < best )
+      {
+        best      = dist;
+        reference = w;
+      }
+    }
+
+    scaled = FT_PIX_ROUND( reference );
+
+    if ( width >= reference )
+    {
+      if ( width < scaled + 48 )
+        width = reference;
+    }
+    else
+    {
+      if ( width > scaled - 48 )
+        width = reference;
+    }
+
+    return width;
+  }
+
+
+  /* compute the snapped width of a given stem */
+
+  static FT_Pos
+  af_latin2_compute_stem_width( AF_GlyphHints  hints,
+                                AF_Dimension   dim,
+                                FT_Pos         width,
+                                FT_UInt        base_flags,
+                                FT_UInt        stem_flags )
+  {
+    AF_LatinMetrics  metrics  = (AF_LatinMetrics) hints->metrics;
+    AF_LatinAxis     axis     = & metrics->axis[dim];
+    FT_Pos           dist     = width;
+    FT_Int           sign     = 0;
+    FT_Int           vertical = ( dim == AF_DIMENSION_VERT );
+
+    FT_UNUSED( base_flags );
+
+
+    if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) ||
+          axis->extra_light                      )
+      return width;
+
+    if ( dist < 0 )
+    {
+      dist = -width;
+      sign = 1;
+    }
+
+    if ( (  vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) ||
+         ( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) )
+    {
+      /* smooth hinting process: very lightly quantize the stem width */
+
+      /* leave the widths of serifs alone */
+
+      if ( ( stem_flags & AF_EDGE_SERIF ) && vertical && ( dist < 3 * 64 ) )
+        goto Done_Width;
+
+#if 0
+      else if ( ( base_flags & AF_EDGE_ROUND ) )
+      {
+        if ( dist < 80 )
+          dist = 64;
+      }
+      else if ( dist < 56 )
+        dist = 56;
+#endif
+      if ( axis->width_count > 0 )
+      {
+        FT_Pos  delta;
+
+
+        /* compare to standard width */
+        if ( axis->width_count > 0 )
+        {
+          delta = dist - axis->widths[0].cur;
+
+          if ( delta < 0 )
+            delta = -delta;
+
+          if ( delta < 40 )
+          {
+            dist = axis->widths[0].cur;
+            if ( dist < 48 )
+              dist = 48;
+
+            goto Done_Width;
+          }
+        }
+
+        if ( dist < 3 * 64 )
+        {
+          delta  = dist & 63;
+          dist  &= -64;
+
+          if ( delta < 10 )
+            dist += delta;
+
+          else if ( delta < 32 )
+            dist += 10;
+
+          else if ( delta < 54 )
+            dist += 54;
+
+          else
+            dist += delta;
+        }
+        else
+          dist = ( dist + 32 ) & ~63;
+      }
+    }
+    else
+    {
+      /* strong hinting process: snap the stem width to integer pixels */
+      FT_Pos  org_dist = dist;
+
+
+      dist = af_latin2_snap_width( axis->widths, axis->width_count, dist );
+
+      if ( vertical )
+      {
+        /* in the case of vertical hinting, always round */
+        /* the stem heights to integer pixels            */
+
+        if ( dist >= 64 )
+          dist = ( dist + 16 ) & ~63;
+        else
+          dist = 64;
+      }
+      else
+      {
+        if ( AF_LATIN_HINTS_DO_MONO( hints ) )
+        {
+          /* monochrome horizontal hinting: snap widths to integer pixels */
+          /* with a different threshold                                   */
+
+          if ( dist < 64 )
+            dist = 64;
+          else
+            dist = ( dist + 32 ) & ~63;
+        }
+        else
+        {
+          /* for horizontal anti-aliased hinting, we adopt a more subtle */
+          /* approach: we strengthen small stems, round stems whose size */
+          /* is between 1 and 2 pixels to an integer, otherwise nothing  */
+
+          if ( dist < 48 )
+            dist = ( dist + 64 ) >> 1;
+
+          else if ( dist < 128 )
+          {
+            /* We only round to an integer width if the corresponding */
+            /* distortion is less than 1/4 pixel.  Otherwise this     */
+            /* makes everything worse since the diagonals, which are  */
+            /* not hinted, appear a lot bolder or thinner than the    */
+            /* vertical stems.                                        */
+
+            FT_Int  delta;
+
+
+            dist = ( dist + 22 ) & ~63;
+            delta = dist - org_dist;
+            if ( delta < 0 )
+              delta = -delta;
+
+            if ( delta >= 16 )
+            {
+              dist = org_dist;
+              if ( dist < 48 )
+                dist = ( dist + 64 ) >> 1;
+            }
+          }
+          else
+            /* round otherwise to prevent color fringes in LCD mode */
+            dist = ( dist + 32 ) & ~63;
+        }
+      }
+    }
+
+  Done_Width:
+    if ( sign )
+      dist = -dist;
+
+    return dist;
+  }
+
+
+  /* align one stem edge relative to the previous stem edge */
+
+  static void
+  af_latin2_align_linked_edge( AF_GlyphHints  hints,
+                               AF_Dimension   dim,
+                               AF_Edge        base_edge,
+                               AF_Edge        stem_edge )
+  {
+    FT_Pos  dist = stem_edge->opos - base_edge->opos;
+
+    FT_Pos  fitted_width = af_latin2_compute_stem_width( hints, dim, dist,
+                                                         base_edge->flags,
+                                                         stem_edge->flags );
+
+
+    stem_edge->pos = base_edge->pos + fitted_width;
+
+    FT_TRACE5(( "LINK: edge %d (opos=%.2f) linked to (%.2f), "
+                "dist was %.2f, now %.2f\n",
+                stem_edge-hints->axis[dim].edges, stem_edge->opos / 64.0,
+                stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 ));
+  }
+
+
+  static void
+  af_latin2_align_serif_edge( AF_GlyphHints  hints,
+                              AF_Edge        base,
+                              AF_Edge        serif )
+  {
+    FT_UNUSED( hints );
+
+    serif->pos = base->pos + ( serif->opos - base->opos );
+  }
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****                    E D G E   H I N T I N G                      ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  static void
+  af_latin2_hint_edges( AF_GlyphHints  hints,
+                        AF_Dimension   dim )
+  {
+    AF_AxisHints  axis       = &hints->axis[dim];
+    AF_Edge       edges      = axis->edges;
+    AF_Edge       edge_limit = edges + axis->num_edges;
+    AF_Edge       edge;
+    AF_Edge       anchor     = NULL;
+    FT_Int        has_serifs = 0;
+    FT_Pos        anchor_drift = 0;
+
+
+
+    FT_TRACE5(( "==== hinting %s edges =====\n",
+                dim == AF_DIMENSION_HORZ ? "vertical" : "horizontal" ));
+
+    /* we begin by aligning all stems relative to the blue zone */
+    /* if needed -- that's only for horizontal edges            */
+
+    if ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_BLUES( hints ) )
+    {
+      for ( edge = edges; edge < edge_limit; edge++ )
+      {
+        AF_Width  blue;
+        AF_Edge   edge1, edge2;
+
+
+        if ( edge->flags & AF_EDGE_DONE )
+          continue;
+
+        blue  = edge->blue_edge;
+        edge1 = NULL;
+        edge2 = edge->link;
+
+        if ( blue )
+        {
+          edge1 = edge;
+        }
+        else if ( edge2 && edge2->blue_edge )
+        {
+          blue  = edge2->blue_edge;
+          edge1 = edge2;
+          edge2 = edge;
+        }
+
+        if ( !edge1 )
+          continue;
+
+        FT_TRACE5(( "BLUE: edge %d (opos=%.2f) snapped to (%.2f), "
+                    "was (%.2f)\n",
+                    edge1-edges, edge1->opos / 64.0, blue->fit / 64.0,
+                    edge1->pos / 64.0 ));
+
+        edge1->pos    = blue->fit;
+        edge1->flags |= AF_EDGE_DONE;
+
+        if ( edge2 && !edge2->blue_edge )
+        {
+          af_latin2_align_linked_edge( hints, dim, edge1, edge2 );
+          edge2->flags |= AF_EDGE_DONE;
+        }
+
+        if ( !anchor )
+        {
+          anchor = edge;
+
+          anchor_drift = ( anchor->pos - anchor->opos );
+          if ( edge2 )
+            anchor_drift = ( anchor_drift +
+                             ( edge2->pos - edge2->opos ) ) >> 1;
+        }
+      }
+    }
+
+    /* now we will align all stem edges, trying to maintain the */
+    /* relative order of stems in the glyph                     */
+    for ( edge = edges; edge < edge_limit; edge++ )
+    {
+      AF_Edge  edge2;
+
+
+      if ( edge->flags & AF_EDGE_DONE )
+        continue;
+
+      /* skip all non-stem edges */
+      edge2 = edge->link;
+      if ( !edge2 )
+      {
+        has_serifs++;
+        continue;
+      }
+
+      /* now align the stem */
+
+      /* this should not happen, but it's better to be safe */
+      if ( edge2->blue_edge )
+      {
+        FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges ));
+
+        af_latin2_align_linked_edge( hints, dim, edge2, edge );
+        edge->flags |= AF_EDGE_DONE;
+        continue;
+      }
+
+      if ( !anchor )
+      {
+        FT_Pos  org_len, org_center, cur_len;
+        FT_Pos  cur_pos1, error1, error2, u_off, d_off;
+
+
+        org_len = edge2->opos - edge->opos;
+        cur_len = af_latin2_compute_stem_width( hints, dim, org_len,
+                                                edge->flags,
+                                                edge2->flags );
+        if ( cur_len <= 64 )
+          u_off = d_off = 32;
+        else
+        {
+          u_off = 38;
+          d_off = 26;
+        }
+
+        if ( cur_len < 96 )
+        {
+          org_center = edge->opos + ( org_len >> 1 );
+
+          cur_pos1   = FT_PIX_ROUND( org_center );
+
+          error1 = org_center - ( cur_pos1 - u_off );
+          if ( error1 < 0 )
+            error1 = -error1;
+
+          error2 = org_center - ( cur_pos1 + d_off );
+          if ( error2 < 0 )
+            error2 = -error2;
+
+          if ( error1 < error2 )
+            cur_pos1 -= u_off;
+          else
+            cur_pos1 += d_off;
+
+          edge->pos  = cur_pos1 - cur_len / 2;
+          edge2->pos = edge->pos + cur_len;
+        }
+        else
+          edge->pos = FT_PIX_ROUND( edge->opos );
+
+        FT_TRACE5(( "ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)"
+                    " snapped to (%.2f) (%.2f)\n",
+                    edge-edges, edge->opos / 64.0,
+                    edge2-edges, edge2->opos / 64.0,
+                    edge->pos / 64.0, edge2->pos / 64.0 ));
+        anchor = edge;
+
+        edge->flags |= AF_EDGE_DONE;
+
+        af_latin2_align_linked_edge( hints, dim, edge, edge2 );
+
+        edge2->flags |= AF_EDGE_DONE;
+
+        anchor_drift = ( ( anchor->pos - anchor->opos ) +
+                         ( edge2->pos - edge2->opos ) ) >> 1;
+
+        FT_TRACE5(( "DRIFT: %.2f\n", anchor_drift/64.0 ));
+      }
+      else
+      {
+        FT_Pos   org_pos, org_len, org_center, cur_center, cur_len;
+        FT_Pos   org_left, org_right;
+
+
+        org_pos    = edge->opos + anchor_drift;
+        org_len    = edge2->opos - edge->opos;
+        org_center = org_pos + ( org_len >> 1 );
+
+        cur_len = af_latin2_compute_stem_width( hints, dim, org_len,
+                                                edge->flags,
+                                                edge2->flags );
+
+        org_left  = org_pos + ( ( org_len - cur_len ) >> 1 );
+        org_right = org_pos + ( ( org_len + cur_len ) >> 1 );
+
+        FT_TRACE5(( "ALIGN: left=%.2f right=%.2f ",
+                    org_left / 64.0, org_right / 64.0 ));
+        cur_center = org_center;
+
+        if ( edge2->flags & AF_EDGE_DONE )
+        {
+          FT_TRACE5(( "\n" ));
+          edge->pos = edge2->pos - cur_len;
+        }
+        else
+        {
+         /* we want to compare several displacement, and choose
+          * the one that increases fitness while minimizing
+          * distortion as well
+          */
+          FT_Pos   displacements[6], scores[6], org, fit, delta;
+          FT_UInt  count = 0;
+
+          /* note: don't even try to fit tiny stems */
+          if ( cur_len < 32 )
+          {
+            FT_TRACE5(( "tiny stem\n" ));
+            goto AlignStem;
+          }
+
+          /* if the span is within a single pixel, don't touch it */
+          if ( FT_PIX_FLOOR( org_left ) == FT_PIX_CEIL( org_right ) )
+          {
+            FT_TRACE5(( "single pixel stem\n" ));
+            goto AlignStem;
+          }
+
+          if ( cur_len <= 96 )
+          {
+           /* we want to avoid the absolute worst case which is
+            * when the left and right edges of the span each represent
+            * about 50% of the gray. we'd better want to change this
+            * to 25/75%, since this is much more pleasant to the eye with
+            * very acceptable distortion
+            */
+            FT_Pos  frac_left  = org_left  & 63;
+            FT_Pos  frac_right = org_right & 63;
+
+            if ( frac_left  >= 22 && frac_left  <= 42 &&
+                 frac_right >= 22 && frac_right <= 42 )
+            {
+              org = frac_left;
+              fit = ( org <= 32 ) ? 16 : 48;
+              delta = FT_ABS( fit - org );
+              displacements[count] = fit - org;
+              scores[count++]      = delta;
+              FT_TRACE5(( "dispA=%.2f (%d) ", ( fit - org ) / 64.0, delta ));
+
+              org = frac_right;
+              fit = ( org <= 32 ) ? 16 : 48;
+              delta = FT_ABS( fit - org );
+              displacements[count] = fit - org;
+              scores[count++]     = delta;
+              FT_TRACE5(( "dispB=%.2f (%d) ", ( fit - org ) / 64.0, delta ));
+            }
+          }
+
+          /* snapping the left edge to the grid */
+          org   = org_left;
+          fit   = FT_PIX_ROUND( org );
+          delta = FT_ABS( fit - org );
+          displacements[count] = fit - org;
+          scores[count++]      = delta;
+          FT_TRACE5(( "dispC=%.2f (%d) ", ( fit - org ) / 64.0, delta ));
+
+          /* snapping the right edge to the grid */
+          org   = org_right;
+          fit   = FT_PIX_ROUND( org );
+          delta = FT_ABS( fit - org );
+          displacements[count] = fit - org;
+          scores[count++]      = delta;
+          FT_TRACE5(( "dispD=%.2f (%d) ", ( fit - org ) / 64.0, delta ));
+
+          /* now find the best displacement */
+          {
+            FT_Pos  best_score = scores[0];
+            FT_Pos  best_disp  = displacements[0];
+            FT_UInt nn;
+
+            for ( nn = 1; nn < count; nn++ )
+            {
+              if ( scores[nn] < best_score )
+              {
+                best_score = scores[nn];
+                best_disp  = displacements[nn];
+              }
+            }
+
+            cur_center = org_center + best_disp;
+          }
+          FT_TRACE5(( "\n" ));
+        }
+
+      AlignStem:
+        edge->pos  = cur_center - ( cur_len >> 1 );
+        edge2->pos = edge->pos + cur_len;
+
+        FT_TRACE5(( "STEM1: %d (opos=%.2f) to %d (opos=%.2f)"
+                    " snapped to (%.2f) and (%.2f),"
+                    " org_len=%.2f cur_len=%.2f\n",
+                    edge-edges, edge->opos / 64.0,
+                    edge2-edges, edge2->opos / 64.0,
+                    edge->pos / 64.0, edge2->pos / 64.0,
+                    org_len / 64.0, cur_len / 64.0 ));
+
+        edge->flags  |= AF_EDGE_DONE;
+        edge2->flags |= AF_EDGE_DONE;
+
+        if ( edge > edges && edge->pos < edge[-1].pos )
+        {
+          FT_TRACE5(( "BOUND: %d (pos=%.2f) to (%.2f)\n",
+                      edge-edges, edge->pos / 64.0, edge[-1].pos / 64.0 ));
+          edge->pos = edge[-1].pos;
+        }
+      }
+    }
+
+    /* make sure that lowercase m's maintain their symmetry */
+
+    /* In general, lowercase m's have six vertical edges if they are sans */
+    /* serif, or twelve if they are with serifs.  This implementation is  */
+    /* based on that assumption, and seems to work very well with most    */
+    /* faces.  However, if for a certain face this assumption is not      */
+    /* true, the m is just rendered like before.  In addition, any stem   */
+    /* correction will only be applied to symmetrical glyphs (even if the */
+    /* glyph is not an m), so the potential for unwanted distortion is    */
+    /* relatively low.                                                    */
+
+    /* We don't handle horizontal edges since we can't easily assure that */
+    /* the third (lowest) stem aligns with the base line; it might end up */
+    /* one pixel higher or lower.                                         */
+
+#if 0
+    {
+      FT_Int  n_edges = edge_limit - edges;
+
+
+      if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) )
+      {
+        AF_Edge  edge1, edge2, edge3;
+        FT_Pos   dist1, dist2, span, delta;
+
+
+        if ( n_edges == 6 )
+        {
+          edge1 = edges;
+          edge2 = edges + 2;
+          edge3 = edges + 4;
+        }
+        else
+        {
+          edge1 = edges + 1;
+          edge2 = edges + 5;
+          edge3 = edges + 9;
+        }
+
+        dist1 = edge2->opos - edge1->opos;
+        dist2 = edge3->opos - edge2->opos;
+
+        span = dist1 - dist2;
+        if ( span < 0 )
+          span = -span;
+
+        if ( span < 8 )
+        {
+          delta = edge3->pos - ( 2 * edge2->pos - edge1->pos );
+          edge3->pos -= delta;
+          if ( edge3->link )
+            edge3->link->pos -= delta;
+
+          /* move the serifs along with the stem */
+          if ( n_edges == 12 )
+          {
+            ( edges + 8 )->pos -= delta;
+            ( edges + 11 )->pos -= delta;
+          }
+
+          edge3->flags |= AF_EDGE_DONE;
+          if ( edge3->link )
+            edge3->link->flags |= AF_EDGE_DONE;
+        }
+      }
+    }
+#endif
+
+    if ( has_serifs || !anchor )
+    {
+      /*
+       *  now hint the remaining edges (serifs and single) in order
+       *  to complete our processing
+       */
+      for ( edge = edges; edge < edge_limit; edge++ )
+      {
+        FT_Pos  delta;
+
+
+        if ( edge->flags & AF_EDGE_DONE )
+          continue;
+
+        delta = 1000;
+
+        if ( edge->serif )
+        {
+          delta = edge->serif->opos - edge->opos;
+          if ( delta < 0 )
+            delta = -delta;
+        }
+
+        if ( delta < 64 + 16 )
+        {
+          af_latin2_align_serif_edge( hints, edge->serif, edge );
+          FT_TRACE5(( "SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)"
+                      " aligned to (%.2f)\n",
+                      edge-edges, edge->opos / 64.0,
+                      edge->serif - edges, edge->serif->opos / 64.0,
+                      edge->pos / 64.0 ));
+        }
+        else if ( !anchor )
+        {
+          FT_TRACE5(( "SERIF_ANCHOR: edge %d (opos=%.2f)"
+                      " snapped to (%.2f)\n",
+                      edge-edges, edge->opos / 64.0, edge->pos / 64.0 ));
+          edge->pos = FT_PIX_ROUND( edge->opos );
+          anchor    = edge;
+        }
+        else
+        {
+          AF_Edge  before, after;
+
+
+          for ( before = edge - 1; before >= edges; before-- )
+            if ( before->flags & AF_EDGE_DONE )
+              break;
+
+          for ( after = edge + 1; after < edge_limit; after++ )
+            if ( after->flags & AF_EDGE_DONE )
+              break;
+
+          if ( before >= edges && before < edge   &&
+               after < edge_limit && after > edge )
+          {
+            if ( after->opos == before->opos )
+              edge->pos = before->pos;
+            else
+              edge->pos = before->pos +
+                          FT_MulDiv( edge->opos - before->opos,
+                                     after->pos - before->pos,
+                                     after->opos - before->opos );
+            FT_TRACE5(( "SERIF_LINK1: edge %d (opos=%.2f) snapped to (%.2f)"
+                        " from %d (opos=%.2f)\n",
+                        edge-edges, edge->opos / 64.0, edge->pos / 64.0,
+                        before - edges, before->opos / 64.0 ));
+          }
+          else
+          {
+            edge->pos = anchor->pos +
+                        ( ( edge->opos - anchor->opos + 16 ) & ~31 );
+
+            FT_TRACE5(( "SERIF_LINK2: edge %d (opos=%.2f)"
+                        " snapped to (%.2f)\n",
+                        edge-edges, edge->opos / 64.0, edge->pos / 64.0 ));
+          }
+        }
+
+        edge->flags |= AF_EDGE_DONE;
+
+        if ( edge > edges && edge->pos < edge[-1].pos )
+          edge->pos = edge[-1].pos;
+
+        if ( edge + 1 < edge_limit        &&
+             edge[1].flags & AF_EDGE_DONE &&
+             edge->pos > edge[1].pos      )
+          edge->pos = edge[1].pos;
+      }
+    }
+  }
+
+
+  static FT_Error
+  af_latin2_hints_apply( FT_UInt          glyph_index,
+                         AF_GlyphHints    hints,
+                         FT_Outline*      outline,
+                         AF_LatinMetrics  metrics )
+  {
+    FT_Error  error;
+    int       dim;
+
+    FT_UNUSED( glyph_index );
+
+
+    error = af_glyph_hints_reload( hints, outline );
+    if ( error )
+      goto Exit;
+
+    /* analyze glyph outline */
+    if ( AF_HINTS_DO_HORIZONTAL( hints ) )
+    {
+      error = af_latin2_hints_detect_features( hints, AF_DIMENSION_HORZ );
+      if ( error )
+        goto Exit;
+    }
+
+    if ( AF_HINTS_DO_VERTICAL( hints ) )
+    {
+      error = af_latin2_hints_detect_features( hints, AF_DIMENSION_VERT );
+      if ( error )
+        goto Exit;
+
+      af_latin2_hints_compute_blue_edges( hints, metrics );
+    }
+
+    /* grid-fit the outline */
+    for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ )
+    {
+#ifdef AF_CONFIG_OPTION_USE_WARPER
+      if ( dim == AF_DIMENSION_HORZ                                  &&
+           metrics->root.scaler.render_mode == FT_RENDER_MODE_NORMAL &&
+           AF_HINTS_DO_WARP( hints )                                 )
+      {
+        AF_WarperRec  warper;
+        FT_Fixed      scale;
+        FT_Pos        delta;
+
+
+        af_warper_compute( &warper, hints, dim, &scale, &delta );
+        af_glyph_hints_scale_dim( hints, dim, scale, delta );
+        continue;
+      }
+#endif /* AF_CONFIG_OPTION_USE_WARPER */
+
+      if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) ||
+           ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) )   )
+      {
+        af_latin2_hint_edges( hints, (AF_Dimension)dim );
+        af_glyph_hints_align_edge_points( hints, (AF_Dimension)dim );
+        af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim );
+        af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim );
+      }
+    }
+    af_glyph_hints_save( hints, outline );
+
+  Exit:
+    return error;
+  }
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****              L A T I N   S C R I P T   C L A S S              *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  AF_DEFINE_WRITING_SYSTEM_CLASS(
+    af_latin2_writing_system_class,
+
+    AF_WRITING_SYSTEM_LATIN2,
+
+    sizeof ( AF_LatinMetricsRec ),
+
+    (AF_WritingSystem_InitMetricsFunc) af_latin2_metrics_init,        /* style_metrics_init    */
+    (AF_WritingSystem_ScaleMetricsFunc)af_latin2_metrics_scale,       /* style_metrics_scale   */
+    (AF_WritingSystem_DoneMetricsFunc) NULL,                          /* style_metrics_done    */
+    (AF_WritingSystem_GetStdWidthsFunc)af_latin2_get_standard_widths, /* style_metrics_getstdw */
+
+    (AF_WritingSystem_InitHintsFunc)   af_latin2_hints_init,          /* style_hints_init      */
+    (AF_WritingSystem_ApplyHintsFunc)  af_latin2_hints_apply          /* style_hints_apply     */
+  )
+
+#else /* !FT_OPTION_AUTOFIT2 */
+
+  /* ANSI C doesn't like empty source files */
+  typedef int  _af_latin2_dummy;
+
+#endif /* !FT_OPTION_AUTOFIT2 */
+
+
+/* END */