laag-fontconfig 2.13.0.0

data/vendor/anongit.freedesktop.org/git/fontconfig/fonts.conf.in

@@ -0,0 +1,94 @@
+<?xml version="1.0"?>
+<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+<!-- /etc/fonts/fonts.conf file to configure system font access -->
+<fontconfig>
+	<its:rules xmlns:its="http://www.w3.org/2005/11/its" version="1.0">
+		<its:translateRule translate="no" selector="/fontconfig/*[not(self::description)]"/>
+	</its:rules>
+
+	<description>Default configuration file</description>
+
+<!--
+	DO NOT EDIT THIS FILE.
+	IT WILL BE REPLACED WHEN FONTCONFIG IS UPDATED.
+	LOCAL CHANGES BELONG IN 'local.conf'.
+
+	The intent of this standard configuration file is to be adequate for
+	most environments.  If you have a reasonably normal environment and
+	have found problems with this configuration, they are probably
+	things that others will also want fixed.  Please submit any
+	problems to the fontconfig bugzilla system located at fontconfig.org
+
+	Note that the normal 'make install' procedure for fontconfig is to
+	replace any existing fonts.conf file with the new version.  Place
+	any local customizations in local.conf which this file references.
+
+	Keith Packard
+-->
+
+<!-- Font directory list -->
+
+	<dir>@FC_DEFAULT_FONTS@</dir>
+	@FC_FONTPATH@
+	<dir prefix="xdg">fonts</dir>
+	<!-- the following element will be removed in the future -->
+	<dir>~/.fonts</dir>
+
+<!--
+  Accept deprecated 'mono' alias, replacing it with 'monospace'
+-->
+	<match target="pattern">
+		<test qual="any" name="family">
+			<string>mono</string>
+		</test>
+		<edit name="family" mode="assign" binding="same">
+			<string>monospace</string>
+		</edit>
+	</match>
+
+<!--
+  Accept alternate 'sans serif' spelling, replacing it with 'sans-serif'
+-->
+	<match target="pattern">
+		<test qual="any" name="family">
+			<string>sans serif</string>
+		</test>
+		<edit name="family" mode="assign" binding="same">
+			<string>sans-serif</string>
+		</edit>
+	</match>
+
+<!--
+  Accept deprecated 'sans' alias, replacing it with 'sans-serif'
+-->
+	<match target="pattern">
+		<test qual="any" name="family">
+			<string>sans</string>
+		</test>
+		<edit name="family" mode="assign" binding="same">
+			<string>sans-serif</string>
+		</edit>
+	</match>
+
+<!--
+  Load local system customization file
+-->
+	<include ignore_missing="yes">@CONFIGDIR@</include>
+
+<!-- Font cache directory list -->
+
+	<cachedir>@FC_CACHEDIR@</cachedir>
+	<cachedir prefix="xdg">fontconfig</cachedir>
+	<!-- the following element will be removed in the future -->
+	<cachedir>~/.fontconfig</cachedir>
+
+	<config>
+<!--
+  Rescan configuration every 30 seconds when FcFontSetList is called
+ -->
+		<rescan>
+			<int>30</int>
+		</rescan>
+	</config>
+
+</fontconfig>

data/vendor/anongit.freedesktop.org/git/fontconfig/fonts.dtd

@@ -0,0 +1,233 @@
+<!-- This is the Document Type Definition for font configuration files -->
+<!ELEMENT fontconfig (dir | 
+		      cache | 
+		      cachedir |
+		      include | 
+		      config |
+		      selectfont |
+		      match | 
+		      alias)* >
+
+<!-- 
+    Add a directory that provides fonts
+-->
+<!ELEMENT dir (#PCDATA)>
+<!ATTLIST dir
+	  prefix    CDATA       "default"
+	  xml:space (default|preserve) 'preserve'>
+
+<!--
+    Define the per-user file that holds cache font information.
+
+    If the filename begins with '~', it is replaced with the users
+    home directory path.
+-->
+<!ELEMENT cache (#PCDATA)>
+<!ATTLIST cache xml:space (default|preserve) 'preserve'>
+
+<!--
+    Add a directory that is searched for font cache files.
+    These hold per-directory cache data and are searched in
+    order for each directory. When writing cache files, the first
+    directory which allows the cache file to be created is used.
+
+    A leading '~' in a directory name is replaced with the users
+    home directory path.
+-->
+<!ELEMENT cachedir (#PCDATA)>
+<!ATTLIST cachedir
+	  prefix    CDATA      "default"
+	  xml:space (default|preserve) 'preserve'>
+
+<!--
+    Reference another configuration file; note that this
+    is another complete font configuration file and not
+    just a file included by the XML parser.
+
+    Set 'ignore_missing' to 'yes' if errors are to be ignored.
+
+    If the filename begins with '~', it is replaced with the users
+    home directory path.
+-->
+<!ELEMENT include (#PCDATA)>
+<!ATTLIST include
+	  ignore_missing    (no|yes)		"no"
+	  prefix	    CDATA               "default"
+	  deprecated	    (yes|no)		"no"
+	  xml:space	    (default|preserve)	"preserve">
+
+<!--
+    Global library configuration data
+ -->
+<!ELEMENT config (blank|rescan)*>
+
+<!--
+    Specify the set of Unicode encoding values which
+    represent glyphs that are allowed to contain no
+    data.  With this list, fontconfig can examine
+    fonts for broken glyphs and eliminate them from
+    the set of valid Unicode chars.  This idea
+    was borrowed from Mozilla
+ -->
+<!ELEMENT blank (int|range)*>
+
+<!--
+    Aliases are just a special case for multiple match elements
+
+    They are syntactically equivalent to:
+
+    <match>
+	<test name="family">
+	    <string value=[family]/>
+	</test>
+	<edit name="family" mode="prepend">
+	    <string value=[prefer]/>
+	    ...
+	</edit>
+	<edit name="family" mode="append">
+	    <string value=[accept]/>
+	    ...
+	</edit>
+	<edit name="family" mode="append_last">
+	    <string value=[default]/>
+	    ...
+	</edit>
+    </match>
+-->
+<!--
+    Periodically rescan the font configuration and
+    directories to synch internal state with filesystem
+ -->
+<!ELEMENT rescan (int)>
+
+<!--
+    Edit list of available fonts at startup/reload time
+ -->
+<!ELEMENT selectfont (rejectfont | acceptfont)* >
+
+<!ELEMENT rejectfont (glob | pattern)*>
+
+<!ELEMENT acceptfont (glob | pattern)*>
+
+<!ELEMENT glob (#PCDATA)>
+
+<!ELEMENT pattern (patelt)*>
+
+<!ENTITY % constant 'int|double|string|matrix|bool|charset|langset|const'>
+
+<!ELEMENT patelt (%constant;)*>
+<!ATTLIST patelt
+	  name CDATA	#REQUIRED>
+
+<!ELEMENT alias (test?, family*, prefer?, accept?, default?)>
+<!ATTLIST alias
+	  binding (weak|strong|same) "weak">
+<!ELEMENT prefer (family)*>
+<!ELEMENT accept (family)*>
+<!ELEMENT default (family)*>
+<!ELEMENT family (#PCDATA)>
+<!ATTLIST family xml:space (default|preserve) 'preserve'>
+
+<!ENTITY % expr 'int|double|string|matrix|bool|charset|langset
+		|name|const
+		|or|and|eq|not_eq|less|less_eq|more|more_eq|contains|not_contains
+		|plus|minus|times|divide|not|if|floor|ceil|round|trunc'>
+
+<!--
+    Match and edit patterns.
+
+    If 'target' is 'pattern', execute the match before selecting a font.
+    if 'target' is 'font', execute the match on the result of a font
+    selection.
+-->
+<!ELEMENT match (test|edit)+>
+<!ATTLIST match
+	  target (pattern|font|scan) "pattern">
+
+<!--
+    Match a field in a pattern
+
+    if 'qual' is 'any', then the match succeeds if any value in the field matches.
+    if 'qual' is 'all', then the match succeeds only if all values match.
+    if 'qual' is 'first', then the match succeeds only if the first value matches.
+    if 'qual' is 'not_first', then the match succeeds only if any value other than
+    	the first matches.
+    For match elements with target=font, if test 'target' is 'pattern',
+    then the test is applied to the pattern used in matching rather than
+    to the resulting font.
+
+    Match elements with target=scan are applied as fonts are scanned.
+    They edit the pattern generated from the scanned font and affect
+    what the fontconfig database contains.
+-->
+<!ELEMENT test (%expr;)*>
+<!ATTLIST test 
+	  qual (any|all|first|not_first)    "any"
+	  name CDATA	    #REQUIRED
+	  target (pattern|font|default)		"default"
+	  ignore-blanks (true|false)	"false"
+	  compare (eq|not_eq|less|less_eq|more|more_eq|contains|not_contains)	"eq">
+
+<!--
+    Edit a field in a pattern
+
+    The enclosed values are used together to edit the list of values
+    associated with 'name'.
+
+    If 'name' matches one of those used in a test element for this match element:
+	if 'mode' is 'assign', replace the matched value.
+	if 'mode' is 'assign_replace', replace all of the values
+	if 'mode' is 'prepend', insert before the matched value
+	if 'mode' is 'append', insert after the matched value
+	if 'mode' is 'prepend_first', insert before all of the values
+	if 'mode' is 'append_last', insert after all of the values
+    If 'name' doesn't match any of those used in a test element:
+	if 'mode' is 'assign' or 'assign_replace, replace all of the values
+	if 'mode' is 'prepend' or 'prepend_first', insert before all of the values
+	if 'mode' is 'append' or 'append_last', insert after all of the values
+-->
+<!ELEMENT edit (%expr;)*>
+<!ATTLIST edit
+	  name CDATA	    #REQUIRED
+	  mode (assign|assign_replace|prepend|append|prepend_first|append_last|delete|delete_all) "assign"
+	  binding (weak|strong|same) "weak">
+
+<!--
+    Elements of expressions follow
+-->
+<!ELEMENT int (#PCDATA)>
+<!ATTLIST int xml:space (default|preserve) 'preserve'>
+<!ELEMENT double (#PCDATA)>
+<!ATTLIST double xml:space (default|preserve) 'preserve'>
+<!ELEMENT string (#PCDATA)>
+<!ATTLIST string xml:space (default|preserve) 'preserve'>
+<!ELEMENT matrix ((%expr;), (%expr;), (%expr;), (%expr;))>
+<!ELEMENT bool (#PCDATA)>
+<!ELEMENT charset (int|range)*>
+<!ELEMENT range (int,int)>
+<!ELEMENT langset (string)*>
+<!ELEMENT name (#PCDATA)>
+<!ATTLIST name xml:space (default|preserve) 'preserve'
+	  target (default|font|pattern) 'default'>
+<!ELEMENT const (#PCDATA)>
+<!ATTLIST const xml:space (default|preserve) 'preserve'>
+<!ELEMENT or (%expr;)*>
+<!ELEMENT and (%expr;)*>
+<!ELEMENT eq ((%expr;), (%expr;))>
+<!ELEMENT not_eq ((%expr;), (%expr;))>
+<!ELEMENT less ((%expr;), (%expr;))>
+<!ELEMENT less_eq ((%expr;), (%expr;))>
+<!ELEMENT more ((%expr;), (%expr;))>
+<!ELEMENT more_eq ((%expr;), (%expr;))>
+<!ELEMENT contains ((%expr;), (%expr;))>
+<!ELEMENT not_contains ((%expr;), (%expr;))>
+<!ELEMENT plus (%expr;)*>
+<!ELEMENT minus (%expr;)*>
+<!ELEMENT times (%expr;)*>
+<!ELEMENT divide (%expr;)*>
+<!ELEMENT not (%expr;)>
+<!ELEMENT if ((%expr;), (%expr;), (%expr;))>
+<!ELEMENT floor (%expr;)>
+<!ELEMENT ceil (%expr;)>
+<!ELEMENT round (%expr;)>
+<!ELEMENT trunc (%expr;)>

data/vendor/anongit.freedesktop.org/git/fontconfig/git.mk

@@ -0,0 +1,254 @@
+# git.mk
+#
+# Copyright 2009, Red Hat, Inc.
+# Copyright 2010,2011 Behdad Esfahbod
+# Written by Behdad Esfahbod
+#
+# Copying and distribution of this file, with or without modification,
+# is permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.
+#
+# The latest version of this file can be downloaded from:
+#   https://raw.github.com/behdad/git.mk/master/git.mk
+# Bugs, etc, should be reported upstream at:
+#   https://github.com/behdad/git.mk
+#
+# To use in your project, import this file in your git repo's toplevel,
+# then do "make -f git.mk".  This modifies all Makefile.am files in
+# your project to -include git.mk.  Remember to add that line to new
+# Makefile.am files you create in your project, or just rerun the
+# "make -f git.mk".
+#
+# This enables automatic .gitignore generation.  If you need to ignore
+# more files, add them to the GITIGNOREFILES variable in your Makefile.am.
+# But think twice before doing that.  If a file has to be in .gitignore,
+# chances are very high that it's a generated file and should be in one
+# of MOSTLYCLEANFILES, CLEANFILES, DISTCLEANFILES, or MAINTAINERCLEANFILES.
+#
+# The only case that you need to manually add a file to GITIGNOREFILES is
+# when remove files in one of mostlyclean-local, clean-local, distclean-local,
+# or maintainer-clean-local make targets.
+#
+# Note that for files like editor backup, etc, there are better places to
+# ignore them.  See "man gitignore".
+#
+# If "make maintainer-clean" removes the files but they are not recognized
+# by this script (that is, if "git status" shows untracked files still), send
+# me the output of "git status" as well as your Makefile.am and Makefile for
+# the directories involved and I'll diagnose.
+#
+# For a list of toplevel files that should be in MAINTAINERCLEANFILES, see
+# Makefile.am.sample in the git.mk git repo.
+#
+# Don't EXTRA_DIST this file.  It is supposed to only live in git clones,
+# not tarballs.  It serves no useful purpose in tarballs and clutters the
+# build dir.
+#
+# This file knows how to handle autoconf, automake, libtool, gtk-doc,
+# gnome-doc-utils, yelp.m4, mallard, intltool, gsettings, dejagnu.
+#
+# This makefile provides the following targets:
+#
+# - all: "make all" will build all gitignore files.
+# - gitignore: makes all gitignore files in the current dir and subdirs.
+# - .gitignore: make gitignore file for the current dir.
+# - gitignore-recurse: makes all gitignore files in the subdirs.
+#
+# KNOWN ISSUES:
+#
+# - Recursive configure doesn't work as $(top_srcdir)/git.mk inside the
+#   submodule doesn't find us.  If you have configure.{in,ac} files in
+#   subdirs, add a proxy git.mk file in those dirs that simply does:
+#   "include $(top_srcdir)/../git.mk".  Add more ..'s to your taste.
+#   And add those files to git.  See vte/gnome-pty-helper/git.mk for
+#   example.
+#
+
+git-all: git-mk-install
+
+git-mk-install:
+	@echo Installing git makefile
+	@any_failed=; \
+		find "`test -z "$(top_srcdir)" && echo . || echo "$(top_srcdir)"`" -name Makefile.am | while read x; do \
+		if grep 'include .*/git.mk' $$x >/dev/null; then \
+			echo $$x already includes git.mk; \
+		else \
+			failed=; \
+			echo "Updating $$x"; \
+			{ cat $$x; \
+			  echo ''; \
+			  echo '-include $$(top_srcdir)/git.mk'; \
+			} > $$x.tmp || failed=1; \
+			if test x$$failed = x; then \
+				mv $$x.tmp $$x || failed=1; \
+			fi; \
+			if test x$$failed = x; then : else \
+				echo Failed updating $$x; >&2 \
+				any_failed=1; \
+			fi; \
+	fi; done; test -z "$$any_failed"
+
+.PHONY: git-all git-mk-install
+
+
+### .gitignore generation
+
+$(srcdir)/.gitignore: Makefile.am $(top_srcdir)/git.mk
+	$(AM_V_GEN) \
+	{ \
+		if test "x$(DOC_MODULE)" = x -o "x$(DOC_MAIN_SGML_FILE)" = x; then :; else \
+			for x in \
+				$(DOC_MODULE)-decl-list.txt \
+				$(DOC_MODULE)-decl.txt \
+				tmpl/$(DOC_MODULE)-unused.sgml \
+				"tmpl/*.bak" \
+				xml html \
+			; do echo /$$x; done; \
+		fi; \
+		if test "x$(DOC_MODULE)$(DOC_ID)" = x -o "x$(DOC_LINGUAS)" = x; then :; else \
+			for lc in $(DOC_LINGUAS); do \
+				for x in \
+					$(if $(DOC_MODULE),$(DOC_MODULE).xml) \
+					$(DOC_PAGES) \
+					$(DOC_INCLUDES) \
+				; do echo /$$lc/$$x; done; \
+			done; \
+			for x in \
+				$(_DOC_OMF_ALL) \
+				$(_DOC_DSK_ALL) \
+				$(_DOC_HTML_ALL) \
+				$(_DOC_MOFILES) \
+				$(DOC_H_FILE) \
+				"*/.xml2po.mo" \
+				"*/*.omf.out" \
+			; do echo /$$x; done; \
+		fi; \
+		if test "x$(HELP_ID)" = x -o "x$(HELP_LINGUAS)" = x; then :; else \
+			for lc in $(HELP_LINGUAS); do \
+				for x in \
+					$(HELP_FILES) \
+					"$$lc.stamp" \
+					"$$lc.mo" \
+				; do echo /$$lc/$$x; done; \
+			done; \
+		fi; \
+		if test "x$(gsettings_SCHEMAS)" = x; then :; else \
+			for x in \
+				$(gsettings_SCHEMAS:.xml=.valid) \
+				$(gsettings__enum_file) \
+			; do echo /$$x; done; \
+		fi; \
+		if test -f $(srcdir)/po/Makefile.in.in; then \
+			for x in \
+				po/Makefile.in.in \
+				po/Makefile.in \
+				po/Makefile \
+				po/Makevars.template \
+				po/POTFILES \
+				po/Rules-quot \
+				po/stamp-it \
+				po/stamp-po \
+				po/.intltool-merge-cache \
+				"po/*~" \
+				"po/*.header" \
+				"po/*.gmo" \
+				"po/*.mo" \
+				"po/*.sed" \
+				"po/*.sin" \
+				po/$(GETTEXT_PACKAGE).pot \
+				intltool-extract.in \
+				intltool-merge.in \
+				intltool-update.in \
+			; do echo /$$x; done; \
+		fi; \
+		if test  -f $(srcdir)/po-conf/Makefile.in.in; then \
+			for x in \
+				po-conf/Makefile.in.in \
+				po-conf/Makefile.in \
+				po-conf/Makefile \
+				po-conf/Makevars.template \
+				po-conf/POTFILES \
+				po-conf/Rules-quot \
+				po-conf/stamp-it \
+				po-conf/stamp-po \
+				"po-conf/*~" \
+				"po-conf/*.header" \
+				"po-conf/*.gmo" \
+				"po-conf/*.mo" \
+				"po-conf/*.sed" \
+				"po-conf/*.sin" \
+				po-conf/$(GETTEXT_PACKAGE)-conf.pot \
+			; do echo /$$x; done; \
+		fi; \
+		if test -f $(srcdir)/configure; then \
+			for x in \
+				autom4te.cache \
+				configure \
+				config.h \
+				stamp-h1 \
+				libtool \
+				config.lt \
+				config.rpath \
+			; do echo /$$x; done; \
+		fi; \
+		if test "x$(DEJATOOL)" = x; then :; else \
+			for x in \
+				$(DEJATOOL) \
+			; do echo /$$x.sum; echo /$$x.log; done; \
+			echo /site.exp; \
+		fi; \
+		for x in \
+			.gitignore \
+			$(GITIGNOREFILES) \
+			$(CLEANFILES) \
+			$(PROGRAMS) $(check_PROGRAMS) $(EXTRA_PROGRAMS) \
+			$(LIBRARIES) $(check_LIBRARIES) $(EXTRA_LIBRARIES) \
+			$(LTLIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LTLIBRARIES) \
+			so_locations \
+			.libs _libs \
+			$(MOSTLYCLEANFILES) \
+			"*.$(OBJEXT)" \
+			"*.lo" \
+			$(DISTCLEANFILES) \
+			$(am__CONFIG_DISTCLEAN_FILES) \
+			$(CONFIG_CLEAN_FILES) \
+			TAGS ID GTAGS GRTAGS GSYMS GPATH tags \
+			"*.tab.c" \
+			$(MAINTAINERCLEANFILES) \
+			$(BUILT_SOURCES) \
+			$(DEPDIR) \
+			Makefile \
+			Makefile.in \
+			"*.orig" \
+			"*.rej" \
+			"*.bak" \
+			"*~" \
+			".*.sw[nop]" \
+			".dirstamp" \
+		; do echo /$$x; done; \
+	} | \
+	sed "s@^/`echo "$(srcdir)" | sed 's/\(.\)/[\1]/g'`/@/@" | \
+	sed 's@/[.]/@/@g' | \
+	LC_ALL=C sort | uniq > $@.tmp && \
+	mv $@.tmp $@;
+
+all: $(srcdir)/.gitignore gitignore-recurse-maybe
+gitignore: $(srcdir)/.gitignore gitignore-recurse
+
+gitignore-recurse-maybe:
+	@for subdir in $(DIST_SUBDIRS); do \
+	  case " $(SUBDIRS) " in \
+	    *" $$subdir "*) :;; \
+	    *) test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) .gitignore gitignore-recurse-maybe || echo "Skipping $$subdir");; \
+	  esac; \
+	done
+gitignore-recurse:
+	@for subdir in $(DIST_SUBDIRS); do \
+	    test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) .gitignore gitignore-recurse || echo "Skipping $$subdir"); \
+	done
+
+maintainer-clean: gitignore-clean
+gitignore-clean:
+	-rm -f $(srcdir)/.gitignore
+
+.PHONY: gitignore-clean gitignore gitignore-recurse gitignore-recurse-maybe