l8 0.0.2 → 0.0.3

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 88b84aac9e164d3a2574231a4faec8a90477f0a3
-  data.tar.gz: d273d1937fc4a2fe49acfec4b6f27399f42fd36d
+  metadata.gz: 552b313bea0a79a81b188d377ac2fabbfdc4cbfe
+  data.tar.gz: 3c1d0312e81a4fd772d080075043ba7acfe72f66
 SHA512:
-  metadata.gz: e48676e30685b59040d1a096a351c2d8c566e378685ef816b9daa9cd4653826c7ef949a7cf32689d6c306175552de39243afe88357fee0a88dd0342af74d0d46
-  data.tar.gz: cc6d2d306537f5f9c57e54eae75267f43d4996c1f2d45615e069d09ee85778f9f720d60fce3314eab6a4742928109dd641f4a8ad06d24430a1ab659e25e23c79
+  metadata.gz: fbd1ee91b43f246b3375bedfffb6eea00c90cda1d3e9180fe89f7c4680c64aa87652f15cda52f6432eee2f3bba1174d3c05ab4414e92c7a70ef8dea30e140ae6
+  data.tar.gz: a76b1e1b2ff62c76c0c7b215c1d3cccb42e65f28670d503a740b0e3b847b7b265080290eec0af2fa383c7fd43b2efd85071617a9d8859497e7334c0b8e82615a

data/README.md

@@ -2,7 +2,7 @@
 
 # L8
 
-A gem for communicating with an [L8 SmartLight](http://l8smartlight.com) over USB.
+A Ruby Gem for communicating with an [L8 SmartLight](http://l8smartlight.com) over USB.
 
 ## Installation
 
@@ -22,12 +22,12 @@ Or install it yourself as:
 
 ## Usage
 
-To connect to your L8 Smartlight, determine the serial port it's on:
+To connect to your L8 Smartlight, determine the serial port it's on and then create a new L8::Smartlight:
 
     require 'l8'
     l8 = L8::Smartlight.new('/dev/tty.usbmodem1421')
 
-### Changing LEDs
+### Change LEDs
 
 Use `set_led` to set one of the LEDs to a color.  The arguments are:
 
@@ -41,21 +41,69 @@ For example, to set the 5th LED in the 3rd row to orange:
 
     l8.set_led(2, 4, 15, 7, 0)
 
-### Clearing the LEDs
+### Clear the LEDs
 
 Use the `clear_matrix` method:
 
     l8.clear_matrix
 
-### Changing the Super (Back) LED
+### Change the Super (Back) LED
 
 Use the `set_superled` method and pass 3 color values (0..15):
 
     l8.set_superled(0, 0, 15)
+    
+### Set L8 Brightness
+
+You can control the overall brightness of the L8 using the `set_brightness` method with one of the following values: `:high`, `:medium` or `:low`.
+
+    l8.set_brightness(:low)
+    
+### Disable/Enable Status LEDs
+
+The status LEDs on the top of the L8 can leak light into the LED matrix or just detract from the main LEDs in general, so you can turn them off with the `disable_status_leds` method. There is a `enable_status_leds` method to turn them back on.
+
+    l8.disable_status_leds
+    
+### Force L8 Orientation
+
+If you lay the L8 flat or move it around a lot it may lose your preferred orienation in reference to the status lights at the top of the L8.
+
+You can force the orientation using the `set_orientation` method and passing one of the following: `:up`, `:down`, `:left` or `:right`.
+
+    l8.set_orientation(:down)
+
+### Display Character
+
+To display an alpha-numeric character on the L8, use the `display_character` method and send a single Ascii character.
+
+    l8.display_character('')
+
+### Power Off
+
+You can turn the L8s off using the `power_off` method.
+
+    l8.power_off
+    
+### Controlling Groups of L8s
+
+You can control a group of L8s as either a Stack or Row of them. This will give you a `set_led` method that treats them as one big matrix of LEDs.
+
+    stack = L8::Stack.new('/dev/tty.usbmodem1421', '/dev/tty.usbmodem1422')
+    stack.set_led(7, 15, 0, 15, 0)
+    
+The following methods are also available on groups of L8s and affect all L8s in the group.
+
+- `clear_matrix`
+- `disable_status_lights`
+    
+#### Identify L8s in a Group
+
+When using a group of L8s you might get your USB ports/wires crossed and need to figure out the correct order to put the L8s in. The `identify` method will put a number on each L8 letting you know how to arrange them - left to right or top to bottom, start at 1.
 
 ## Resources
 
-- [SLCP Specification 1.0](http://www.l8smartlight.com/dev/slcp/1.0/#_Toc380755772)
+- [SLCP Specification 1.0](http://www.l8smartlight.com/dev/slcp/1.0/)
 
 ## Contributing
 

data/examples/build_status.rb

@@ -39,7 +39,7 @@ def get_statuses(url)
   JSON.parse(response)
 end
 
-@l8 = L8::Smartlight.new('/dev/tty.usbmodem1411')
+@l8 = L8::Smartlight.new('/dev/tty.usbmodem1a1211')
 
 @projects = %w(
   https://api.travis-ci.org/repos/spilth/l8/builds

data/examples/l8strosmash.rb

@@ -0,0 +1,46 @@
+require 'l8'
+
+stack = L8::Stack.new('/dev/tty.usbmodem1a1211', '/dev/tty.usbmodem1a1221')
+stack.clear_matrix
+
+sleep 2
+
+# ground
+
+(0..7).each do |y|
+  stack.set_led(15, y, 0, 7, 0)
+end
+
+# ship
+
+stack.set_led(14, 0, 15, 15, 15)
+stack.set_led(14, 1, 15, 15, 15)
+stack.set_led(14, 2, 15, 15, 15)
+stack.set_led(13, 1, 15, 15, 15)
+
+# stars
+
+stack.set_led(1, 6, 1, 1, 1)
+stack.set_led(3, 2, 1, 1, 1)
+stack.set_led(6, 5, 1, 1, 1)
+stack.set_led(8, 2, 1, 1, 1)
+stack.set_led(10, 6, 1, 1, 1)
+
+# asteroids
+
+stack.set_led(1,1, 15, 7, 0)
+stack.set_led(1,2, 15, 7, 0)
+stack.set_led(2,1, 15, 7, 0)
+stack.set_led(2,2, 15, 7, 0)
+
+stack.set_led(4,6, 15, 0, 15)
+stack.set_led(4,7, 15, 0, 15)
+stack.set_led(5,6, 15, 0, 15)
+stack.set_led(5,7, 15, 0, 15)
+
+stack.set_led(9, 4, 15, 15, 0)
+stack.set_led(9, 5, 15, 15, 0)
+stack.set_led(10, 4, 15, 15, 0)
+stack.set_led(10, 5, 15, 15, 0)
+
+sleep 2

data/examples/nes_draw.rb

@@ -0,0 +1,63 @@
+require 'l8'
+require 'sdl'
+
+SDL.init(SDL::INIT_JOYSTICK)
+@joystick = SDL::Joystick.open(0)
+
+@x = 0
+@y = 0
+
+@l8 = L8::Row.new('/dev/tty.usbmodem1a1211', '/dev/tty.usbmodem1a1221')
+@l8.clear_matrix
+@l8.disable_status_leds
+# @l8.set_brightness(:low)
+# @l8.set_superled(0,0,0)
+@l8.set_led(@x,@y, 15, 15, 15)
+@l8.identify
+
+@colors = [
+    [14,0,0],
+    [0,14,0],
+    [0,0,14],
+    [14,14,14],
+    [0,0,0]
+]
+@color_index = 0
+
+while(true) do
+  SDL::Joystick.update_all
+  break if @joystick.button(9)
+  sleep 0.1
+end
+
+def read_joystick
+  SDL::Joystick.update_all
+
+  @color_index = @color_index + 1 if @joystick.button(1)
+  @color_index = @color_index - 1 if @joystick.button(2)
+
+  @color_index = 0 if @color_index > 4
+  @color_index = 4 if @color_index < 0
+
+  color = @colors[@color_index]
+  @l8.set_led(@y,@x, color[0], color[1], color[2])
+
+  # @l8.set_superled(color[0], color[1], color[2]) if @joystick.button(8)
+
+  @x = @x - 1 if @joystick.axis(3) < -16384
+  @x = @x + 1 if @joystick.axis(3) > 16384
+  @y = @y - 1 if @joystick.axis(4) < -16384
+  @y = @y + 1 if @joystick.axis(4) > 16384
+
+  @x = 0 if @x < 0
+  @y = 0 if @y < 0
+  @x = 15 if @x > 15
+  @y = 7 if @y > 7
+
+  @l8.set_led(@y,@x, color[0] + 1, color[1] + 1, color[2] + 1)
+
+  @l8.clear_matrix if @joystick.button(9)
+  sleep 0.2
+end
+
+read_joystick while(true)

data/examples/pong.rb

@@ -0,0 +1,44 @@
+require 'l8'
+
+row = L8::Row.new('/dev/tty.usbmodem1a1211', '/dev/tty.usbmodem1a1221')
+row.clear_matrix
+row.disable_status_leds
+
+sleep 1
+
+# red paddle
+
+(2..4).each do |x|
+  row.set_led(x, 0, 15, 0, 0)
+end
+
+# blue paddle
+
+(3..5).each do |x|
+  row.set_led(x, 15, 0, 0, 15)
+end
+
+# ball
+
+row.set_led(3, 4, 15, 15, 15)
+
+# red score
+
+(4..6).each do |x|
+  row.set_led(0, x, 1, 0, 0)
+end
+
+# blue score
+
+(9..13).each do |x|
+  row.set_led(0, x, 0, 0, 1)
+end
+
+# divider
+
+(0..7).step(2) do |x|
+  row.set_led(x, 7, 1, 1, 1)
+  row.set_led(x + 1, 8, 1, 1, 1)
+end
+
+sleep 2

data/lib/l8.rb

@@ -1,6 +1,8 @@
 require 'l8/version'
 require 'l8/smartlight'
+require 'l8/group'
 require 'l8/stack'
+require 'l8/row'
 require 'l8/util'
 
 module L8

data/lib/l8/group.rb

@@ -0,0 +1,30 @@
+module L8
+  class Group
+    def initialize(*ports)
+      @l8s = []
+
+      ports.each do |port|
+        @l8s << L8::Smartlight.new(port)
+      end
+    end
+
+    def disable_status_leds
+      @l8s.each do |l8|
+        l8.disable_status_leds
+      end
+    end
+
+    def clear_matrix
+      @l8s.each do |l8|
+        l8.clear_matrix
+      end
+    end
+
+    def identify
+      @l8s.each_with_index do |l8, index|
+        l8.display_character((index + 1).to_s)
+      end
+    end
+
+  end
+end

data/lib/l8/row.rb

@@ -0,0 +1,9 @@
+module L8
+  class Row < Group
+    def set_led(x,y,r,g,b)
+      l8index = y / 8
+      y = y - (l8index * 8)
+      @l8s[l8index].set_led(x,y,r,g,b)
+    end
+  end
+end

data/lib/l8/smartlight.rb

@@ -2,14 +2,15 @@ require 'rubyserial'
 
 module L8
   class Smartlight
+    CMD_L8_DISP_CHAR = 0x7f
     CMD_L8_LED_SET = 0x43
     CMD_L8_MATRIX_OFF = 0x45
-    CMD_L8_SUPERLED_SET = 0x4b
-    CMD_L8_STATUSLEDS_ENABLE = 0x9e
-    CMD_L8_SET_LOW_BRIGHTNESS = 0x9a
-    CMD_L8_POWEROFF = 0x9d
     CMD_L8_MATRIX_SET = 0x44
+    CMD_L8_POWEROFF = 0x9d
+    CMD_L8_SET_LOW_BRIGHTNESS = 0x9a
     CMD_L8_SET_ORIENTATION = 0x80
+    CMD_L8_STATUSLEDS_ENABLE = 0x9e
+    CMD_L8_SUPERLED_SET = 0x4b
 
     def initialize(serial_port)
       @serial_port = Serial.new(serial_port)
@@ -18,66 +19,59 @@ module L8
     end
 
     def clear_matrix
-      @serial_port.write Util.frame([CMD_L8_MATRIX_OFF])
+      send_command [CMD_L8_MATRIX_OFF]
     end
 
     def set_led(x, y, r, g, b)
-      payload = [CMD_L8_LED_SET, x, y, b, g, r, 0x00]
-
-      @serial_port.write Util.frame(payload)
+      send_command [CMD_L8_LED_SET, x, y, b, g, r, 0x00]
     end
 
     def set_superled(r,g,b)
-      payload = [CMD_L8_SUPERLED_SET, b, g, r]
+      send_command [CMD_L8_SUPERLED_SET, b, g, r]
+    end
 
-      @serial_port.write Util.frame(payload)
+    def display_character(character)
+      send_command [CMD_L8_DISP_CHAR, character.bytes[0], 0]
     end
 
     def enable_status_leds
-      payload = [CMD_L8_STATUSLEDS_ENABLE, 1]
-
-      @serial_port.write Util.frame(payload)
+      send_command [CMD_L8_STATUSLEDS_ENABLE, 1]
     end
 
     def disable_status_leds
-      payload = [CMD_L8_STATUSLEDS_ENABLE, 0]
-
-      @serial_port.write Util.frame(payload)
+      send_command [CMD_L8_STATUSLEDS_ENABLE, 0]
     end
 
     def set_brightness(level)
       brightness = 0
+      brightness = 2 if level == :low
+      brightness = 1 if level == :medium
 
-      if level == :low
-        brightness = 2
-      elsif level == :medium
-        brightness = 1
-      end
-
-      payload = [CMD_L8_SET_LOW_BRIGHTNESS, brightness]
-
-      @serial_port.write Util.frame(payload)
+      send_command [CMD_L8_SET_LOW_BRIGHTNESS, brightness]
     end
 
     def power_off
-      @serial_port.write Util.frame([CMD_L8_POWEROFF])
+      send_command [CMD_L8_POWEROFF]
     end
 
     def set_matrix(pixels)
       data = Util.pixels_to_two_byte_array(pixels)
 
-      payload = [CMD_L8_MATRIX_SET] + data
-
-      @serial_port.write Util.frame(payload)
+      send_command [CMD_L8_MATRIX_SET] + data
     end
 
     def set_orientation(orientation)
-      value = 1 if orientation == :up
+      value = 1
       value = 2 if orientation == :down
       value = 5 if orientation == :right
       value = 6 if orientation == :left
 
-      payload = [CMD_L8_SET_ORIENTATION, value]
+      send_command [CMD_L8_SET_ORIENTATION, value]
+    end
+
+    private
+
+    def send_command payload
       @serial_port.write Util.frame(payload)
     end
   end

data/lib/l8/stack.rb

@@ -1,23 +1,9 @@
 module L8
-  class Stack
-    def initialize(*ports)
-      @l8s = []
-
-      ports.each do |port|
-        @l8s << L8::Smartlight.new(port)
-      end
-    end
-
+  class Stack < Group
     def set_led(x,y,r,g,b)
       l8index = x / 8
       x = x - (l8index * 8)
       @l8s[l8index].set_led(x,y,r,g,b)
     end
-
-    def clear_matrix
-      @l8s.each do |l8|
-        l8.clear_matrix
-      end
-    end
   end
 end

data/lib/l8/version.rb

@@ -1,3 +1,3 @@
 module L8
-  VERSION = "0.0.2"
+  VERSION = "0.0.3"
 end

data/spec/lib/group_spec.rb

@@ -0,0 +1,60 @@
+require 'spec_helper'
+
+module L8
+  describe Group do
+    describe 'constructor' do
+      it 'creates a Smartlight instance on each supplied serial port' do
+        expect(L8::Smartlight).to receive(:new).with('/dev/foo') { 'foo' }
+        expect(L8::Smartlight).to receive(:new).with('/dev/bar') { 'bar' }
+
+        L8::Group.new('/dev/foo', '/dev/bar')
+      end
+    end
+
+    describe '#clear_matrix' do
+      describe 'when there are three L8s in the Group' do
+        let(:light1) { double(:l8one) }
+        let(:light2) { double(:l8two) }
+        let(:light3) { double(:l8three) }
+
+        before(:each) do
+          allow(L8::Smartlight).to receive(:new).with('/dev/foo') { light1 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/bar') { light2 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/baz') { light3 }
+        end
+
+        it 'calls clear_matrix on each light' do
+          expect(light1).to receive(:clear_matrix)
+          expect(light2).to receive(:clear_matrix)
+          expect(light3).to receive(:clear_matrix)
+
+          l8Group = L8::Group.new('/dev/foo', '/dev/bar', '/dev/baz')
+          l8Group.clear_matrix
+        end
+      end
+    end
+
+    describe '#disable_status_lights' do
+      describe 'when there are three L8s in the Group' do
+        let(:light1) { double(:l8one) }
+        let(:light2) { double(:l8two) }
+        let(:light3) { double(:l8three) }
+
+        before(:each) do
+          allow(L8::Smartlight).to receive(:new).with('/dev/foo') { light1 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/bar') { light2 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/baz') { light3 }
+        end
+
+        it 'calls disable_status_lights on each light' do
+          expect(light1).to receive(:disable_status_leds)
+          expect(light2).to receive(:disable_status_leds)
+          expect(light3).to receive(:disable_status_leds)
+
+          l8Group = L8::Group.new('/dev/foo', '/dev/bar', '/dev/baz')
+          l8Group.disable_status_leds
+        end
+      end
+    end
+  end
+end

data/spec/lib/row_spec.rb

@@ -0,0 +1,46 @@
+require 'spec_helper'
+
+module L8
+  describe Row do
+    describe '#set_led' do
+      describe 'when there are three L8s in the stack' do
+        let(:light1) { double(:l8one) }
+        let(:light2) { double(:l8two) }
+        let(:light3) { double(:l8three) }
+
+        before(:each) do
+          allow(L8::Smartlight).to receive(:new).with('/dev/foo') { light1 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/bar') { light2 }
+          allow(L8::Smartlight).to receive(:new).with('/dev/baz') { light3 }
+        end
+
+        describe 'when the pixel is within the range of the first L8' do
+          it 'turns on an led on the first L8' do
+            expect(light1).to receive(:set_led).with(7,7,15,15,15)
+
+            l8stack = L8::Row.new('/dev/foo', '/dev/bar')
+            l8stack.set_led(7,7,15,15,15)
+          end
+        end
+
+        describe 'when the pixel is outside the range of the first L8' do
+          it 'turns on an LED on the second L8' do
+            expect(light2).to receive(:set_led).with(0,0,15,15,15)
+
+            l8stack = L8::Row.new('/dev/foo', '/dev/bar')
+            l8stack.set_led(0,8,15,15,15)
+          end
+        end
+
+        describe 'when the pixel is outside the range of the first and second L8' do
+          it 'turns on an LED on the third L8' do
+            expect(light3).to receive(:set_led).with(0,0,15,15,15)
+
+            l8stack = L8::Row.new('/dev/foo', '/dev/bar', '/dev/baz')
+            l8stack.set_led(0,16,15,15,15)
+          end
+        end
+      end
+    end
+  end
+end

data/spec/lib/smartlight_spec.rb

@@ -21,6 +21,15 @@ module L8
       end
     end
 
+    describe '#clear_matrix' do
+      it 'sends a command to clear the matrix' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_MATRIX_OFF]) { 'foo'}
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.clear_matrix
+      end
+    end
+
     describe '#set_led' do
       it 'sets the color of the LED at given location' do
         expect(Util).to receive(:frame).with([Smartlight::CMD_L8_LED_SET, 3, 0, 15, 15, 15, 0]) { 'foo'}
@@ -30,6 +39,80 @@ module L8
       end
     end
 
+    describe '#set_superled' do
+      it 'sets the color of the superled' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_SUPERLED_SET, 15, 14, 13]) { 'foo'}
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.set_superled(13, 14, 15)
+      end
+    end
+
+    describe '#display_character' do
+      it 'display a single character on the L8' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_DISP_CHAR, 66, 0]) { 'foo' }
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.display_character('B')
+      end
+    end
+
+    describe '#enable_status_leds' do
+      it 'enables the status LEDs' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_STATUSLEDS_ENABLE, 1]) { 'foo'}
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.enable_status_leds
+      end
+    end
+
+    describe '#disable_status_leds' do
+      it 'disables the status LEDs' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_STATUSLEDS_ENABLE, 0]) { 'foo'}
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.disable_status_leds
+      end
+    end
+
+    describe '#set_brightness' do
+      describe 'to low' do
+        it 'sets it to low' do
+          expect(Util).to receive(:frame).with([Smartlight::CMD_L8_SET_LOW_BRIGHTNESS, 2]) { 'foo'}
+
+          l8 = L8::Smartlight.new('serial_port')
+          l8.set_brightness(:low)
+        end
+      end
+
+      describe 'to medium' do
+        it 'sets it to medium' do
+          expect(Util).to receive(:frame).with([Smartlight::CMD_L8_SET_LOW_BRIGHTNESS, 1]) { 'foo'}
+
+          l8 = L8::Smartlight.new('serial_port')
+          l8.set_brightness(:medium)
+        end
+      end
+
+      describe 'to high' do
+        it 'sets it to high' do
+          expect(Util).to receive(:frame).with([Smartlight::CMD_L8_SET_LOW_BRIGHTNESS, 0]) { 'foo'}
+
+          l8 = L8::Smartlight.new('serial_port')
+          l8.set_brightness(:high)
+        end
+      end
+    end
+
+    describe '#power_off' do
+      it 'sends the poweroff message' do
+        expect(Util).to receive(:frame).with([Smartlight::CMD_L8_POWEROFF]) { 'foo'}
+
+        l8 = L8::Smartlight.new('serial_port')
+        l8.power_off
+      end
+    end
+
     describe '#set_orientation' do
       before(:each) do
         allow(serial_port).to receive(:write).with('foo')

data/spec/lib/stack_spec.rb

@@ -2,38 +2,6 @@ require 'spec_helper'
 
 module L8
   describe Stack do
-    describe 'constructor' do
-      it 'creates a Smartlight instance on each supplied serial port' do
-        expect(L8::Smartlight).to receive(:new).with('/dev/foo') { 'foo' }
-        expect(L8::Smartlight).to receive(:new).with('/dev/bar') { 'bar' }
-
-        L8::Stack.new('/dev/foo', '/dev/bar')
-      end
-    end
-
-    describe '#clear_matrix' do
-      describe 'when there are three L8s in the stack' do
-        let(:light1) { double(:l8one) }
-        let(:light2) { double(:l8two) }
-        let(:light3) { double(:l8three) }
-
-        before(:each) do
-          allow(L8::Smartlight).to receive(:new).with('/dev/foo') { light1 }
-          allow(L8::Smartlight).to receive(:new).with('/dev/bar') { light2 }
-          allow(L8::Smartlight).to receive(:new).with('/dev/baz') { light3 }
-        end
-
-        it 'calls clear_matrix on each light' do
-          expect(light1).to receive(:clear_matrix)
-          expect(light2).to receive(:clear_matrix)
-          expect(light3).to receive(:clear_matrix)
-
-          l8stack = L8::Stack.new('/dev/foo', '/dev/bar', '/dev/baz')
-          l8stack.clear_matrix
-        end
-      end
-    end
-
     describe '#set_led' do
       describe 'when there are three L8s in the stack' do
         let(:light1) { double(:l8one) }

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: l8
 version: !ruby/object:Gem::Version
-  version: 0.0.2
+  version: 0.0.3
 platform: ruby
 authors:
 - Brian Kelly
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2015-01-11 00:00:00.000000000 Z
+date: 2015-01-24 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: rubyserial
@@ -96,12 +96,19 @@ files:
 - Rakefile
 - examples/build_status.rb
 - examples/draw.rb
+- examples/l8strosmash.rb
+- examples/nes_draw.rb
+- examples/pong.rb
 - l8.gemspec
 - lib/l8.rb
+- lib/l8/group.rb
+- lib/l8/row.rb
 - lib/l8/smartlight.rb
 - lib/l8/stack.rb
 - lib/l8/util.rb
 - lib/l8/version.rb
+- spec/lib/group_spec.rb
+- spec/lib/row_spec.rb
 - spec/lib/smartlight_spec.rb
 - spec/lib/stack_spec.rb
 - spec/lib/util_spec.rb
@@ -131,6 +138,8 @@ signing_key:
 specification_version: 4
 summary: Gem for communicating with an L8 SmartLight
 test_files:
+- spec/lib/group_spec.rb
+- spec/lib/row_spec.rb
 - spec/lib/smartlight_spec.rb
 - spec/lib/stack_spec.rb
 - spec/lib/util_spec.rb