kubevirt 0.2.0 → 0.3.0

data/lib/kubevirt/models/v1_stall_detector_options.rb

@@ -0,0 +1,218 @@
+=begin
+#KubeVirt API
+
+#This is KubeVirt API an add-on for Kubernetes.
+
+The version of the OpenAPI document: 1.0.0
+Contact: kubevirt-dev@googlegroups.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Kubevirt
+  class V1StallDetectorOptions < ApiModelBase
+    # CompletionTimeoutFactor multiplies the computed migration completion timeout to determine the total time budget for deciding whether a forced switchover can still finish in time, and to extend the abort deadline after initiating a completion-timeout-driven switchover. Defaults to \"2\".
+    attr_accessor :completion_timeout_factor
+
+    # EwmaAlpha is the smoothing factor for the exponentially weighted moving average of observed migration bandwidth. Must be in the range (0, 1]; zero is invalid because the estimate would never incorporate new samples. Higher values weight recent samples more heavily. Defaults to \"0.4\".
+    attr_accessor :ewma_alpha
+
+    # PatienceWindowDecayFactor is the factor by which the relaxation patience window is multiplied after each best-remaining-bytes relaxation step. Defaults to \"0.5\".
+    attr_accessor :patience_window_decay_factor
+
+    # PrecopyPossibleFactor is the maximum factor by which estimated downtime may exceed MaxDowntime while still attempting a soft stop-and-copy instead of aborting the migration. Defaults to \"1.5\".
+    attr_accessor :precopy_possible_factor
+
+    # SearchLocalMinima controls whether convergence actions are delayed until remaining bytes reach a local minimum near the best observed value. When false, actions may trigger as soon as a stall is detected. Defaults to true.
+    attr_accessor :search_local_minima
+
+    # StallMargin is the fractional tolerance, expressed as a percentage, used when comparing remaining migration bytes against the best observed value to detect stalls and local minima. A stall is reported when remaining bytes stay above (1 - StallMargin/100) of the outside-window minimum. Defaults to 4.
+    attr_accessor :stall_margin
+
+    # StallProgressTimeout is the duration in seconds of the sliding window used to track minimum remaining-bytes and detect when migration progress has stalled. Defaults to 40.
+    attr_accessor :stall_progress_timeout
+
+    # SwitchoverTimeout is the duration in seconds allowed for a stop-and-copy or post-copy switchover to complete after being triggered before the migration is aborted. Defaults to 60.
+    attr_accessor :switchover_timeout
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'completion_timeout_factor' => :'completionTimeoutFactor',
+        :'ewma_alpha' => :'ewmaAlpha',
+        :'patience_window_decay_factor' => :'patienceWindowDecayFactor',
+        :'precopy_possible_factor' => :'precopyPossibleFactor',
+        :'search_local_minima' => :'searchLocalMinima',
+        :'stall_margin' => :'stallMargin',
+        :'stall_progress_timeout' => :'stallProgressTimeout',
+        :'switchover_timeout' => :'switchoverTimeout'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'completion_timeout_factor' => :'String',
+        :'ewma_alpha' => :'String',
+        :'patience_window_decay_factor' => :'String',
+        :'precopy_possible_factor' => :'String',
+        :'search_local_minima' => :'Boolean',
+        :'stall_margin' => :'Integer',
+        :'stall_progress_timeout' => :'Integer',
+        :'switchover_timeout' => :'Integer'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubevirt::V1StallDetectorOptions` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubevirt::V1StallDetectorOptions`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'completion_timeout_factor')
+        self.completion_timeout_factor = attributes[:'completion_timeout_factor']
+      end
+
+      if attributes.key?(:'ewma_alpha')
+        self.ewma_alpha = attributes[:'ewma_alpha']
+      end
+
+      if attributes.key?(:'patience_window_decay_factor')
+        self.patience_window_decay_factor = attributes[:'patience_window_decay_factor']
+      end
+
+      if attributes.key?(:'precopy_possible_factor')
+        self.precopy_possible_factor = attributes[:'precopy_possible_factor']
+      end
+
+      if attributes.key?(:'search_local_minima')
+        self.search_local_minima = attributes[:'search_local_minima']
+      end
+
+      if attributes.key?(:'stall_margin')
+        self.stall_margin = attributes[:'stall_margin']
+      end
+
+      if attributes.key?(:'stall_progress_timeout')
+        self.stall_progress_timeout = attributes[:'stall_progress_timeout']
+      end
+
+      if attributes.key?(:'switchover_timeout')
+        self.switchover_timeout = attributes[:'switchover_timeout']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          completion_timeout_factor == o.completion_timeout_factor &&
+          ewma_alpha == o.ewma_alpha &&
+          patience_window_decay_factor == o.patience_window_decay_factor &&
+          precopy_possible_factor == o.precopy_possible_factor &&
+          search_local_minima == o.search_local_minima &&
+          stall_margin == o.stall_margin &&
+          stall_progress_timeout == o.stall_progress_timeout &&
+          switchover_timeout == o.switchover_timeout
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [completion_timeout_factor, ewma_alpha, patience_window_decay_factor, precopy_possible_factor, search_local_minima, stall_margin, stall_progress_timeout, switchover_timeout].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end

data/lib/kubevirt/models/v1_start_options.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 

data/lib/kubevirt/models/v1_stop_options.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 

data/lib/kubevirt/models/v1_storage_migrated_volume_info.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 

data/lib/kubevirt/models/v1_support_container_resources.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 

data/lib/kubevirt/models/v1_sy_nic_timer.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 
@@ -17,6 +17,7 @@ module Kubevirt
   class V1SyNICTimer < ApiModelBase
     attr_accessor :direct
 
+    # Enabled determines if the feature should be enabled or disabled on the guest. Defaults to true.
     attr_accessor :enabled
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/kubevirt/models/v1_sysprep_source.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 

data/lib/kubevirt/models/v1_tdx_attestation_configuration.rb

@@ -0,0 +1,159 @@
+=begin
+#KubeVirt API
+
+#This is KubeVirt API an add-on for Kubernetes.
+
+The version of the OpenAPI document: 1.0.0
+Contact: kubevirt-dev@googlegroups.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Kubevirt
+  # QGSConfiguration holds QGS configuration
+  class V1TDXAttestationConfiguration < ApiModelBase
+    # Indicates whether TDX VM should enforce the existence of QGS (required for attestation) to be scheduled
+    attr_accessor :enforced
+
+    # Socket path pointing to the Quote Generation Service
+    attr_accessor :qgs_socket_path
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'enforced' => :'enforced',
+        :'qgs_socket_path' => :'qgsSocketPath'
+      }
+    end
+
+    # Returns attribute mapping this model knows about
+    def self.acceptable_attribute_map
+      attribute_map
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      acceptable_attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'enforced' => :'Boolean',
+        :'qgs_socket_path' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubevirt::V1TDXAttestationConfiguration` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      acceptable_attribute_map = self.class.acceptable_attribute_map
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!acceptable_attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubevirt::V1TDXAttestationConfiguration`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'enforced')
+        self.enforced = attributes[:'enforced']
+      end
+
+      if attributes.key?(:'qgs_socket_path')
+        self.qgs_socket_path = attributes[:'qgs_socket_path']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          enforced == o.enforced &&
+          qgs_socket_path == o.qgs_socket_path
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [enforced, qgs_socket_path].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+  end
+
+end

data/lib/kubevirt/models/{v1_device_attribute.rb → v1_tdx_configuration.rb}

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end
 
@@ -14,19 +14,13 @@ require 'date'
 require 'time'
 
 module Kubevirt
-  # DeviceAttribute must have exactly one field set.
-  class V1DeviceAttribute < ApiModelBase
-    # MDevUUID is the mediated device uuid of the allocated device
-    attr_accessor :m_dev_uuid
-
-    # PCIAddress is the PCIe bus address of the allocated device
-    attr_accessor :pci_address
+  class V1TDXConfiguration < ApiModelBase
+    attr_accessor :attestation
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'m_dev_uuid' => :'mDevUUID',
-        :'pci_address' => :'pciAddress'
+        :'attestation' => :'attestation'
       }
     end
 
@@ -43,8 +37,7 @@ module Kubevirt
     # Attribute type mapping.
     def self.openapi_types
       {
-        :'m_dev_uuid' => :'String',
-        :'pci_address' => :'String'
+        :'attestation' => :'V1TDXAttestationConfiguration'
       }
     end
 
@@ -58,24 +51,20 @@ module Kubevirt
     # @param [Hash] attributes Model attributes in the form of hash
     def initialize(attributes = {})
       if (!attributes.is_a?(Hash))
-        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubevirt::V1DeviceAttribute` initialize method"
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubevirt::V1TDXConfiguration` initialize method"
       end
 
       # check to see if the attribute exists and convert string to symbol for hash key
       acceptable_attribute_map = self.class.acceptable_attribute_map
       attributes = attributes.each_with_object({}) { |(k, v), h|
         if (!acceptable_attribute_map.key?(k.to_sym))
-          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubevirt::V1DeviceAttribute`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubevirt::V1TDXConfiguration`. Please check the name to make sure it's valid. List of attributes: " + acceptable_attribute_map.keys.inspect
         end
         h[k.to_sym] = v
       }
 
-      if attributes.key?(:'m_dev_uuid')
-        self.m_dev_uuid = attributes[:'m_dev_uuid']
-      end
-
-      if attributes.key?(:'pci_address')
-        self.pci_address = attributes[:'pci_address']
+      if attributes.key?(:'attestation')
+        self.attestation = attributes[:'attestation']
       end
     end
 
@@ -99,8 +88,7 @@ module Kubevirt
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          m_dev_uuid == o.m_dev_uuid &&
-          pci_address == o.pci_address
+          attestation == o.attestation
     end
 
     # @see the `==` method
@@ -112,7 +100,7 @@ module Kubevirt
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [m_dev_uuid, pci_address].hash
+      [attestation].hash
     end
 
     # Builds the object from hash

data/lib/kubevirt/models/v1_timer.rb

@@ -6,7 +6,7 @@
 The version of the OpenAPI document: 1.0.0
 Contact: kubevirt-dev@googlegroups.com
 Generated by: https://openapi-generator.tech
-Generator version: 7.17.0
+Generator version: 7.24.0
 
 =end