kubevirt 0.1.0 → 0.2.1

data/spec/models/v1beta1_volume_preferences_spec.rb

@@ -1,36 +0,0 @@
-=begin
-#KubeVirt API
-
-#This is KubeVirt API an add-on for Kubernetes.
-
-The version of the OpenAPI document: 1.0.0
-Contact: kubevirt-dev@googlegroups.com
-Generated by: https://openapi-generator.tech
-Generator version: 7.9.0
-
-=end
-
-require 'spec_helper'
-require 'json'
-require 'date'
-
-# Unit tests for Kubevirt::V1beta1VolumePreferences
-# Automatically generated by openapi-generator (https://openapi-generator.tech)
-# Please update as you see appropriate
-describe Kubevirt::V1beta1VolumePreferences do
-  let(:instance) { Kubevirt::V1beta1VolumePreferences.new }
-
-  describe 'test an instance of V1beta1VolumePreferences' do
-    it 'should create an instance of V1beta1VolumePreferences' do
-      # uncomment below to test the instance creation
-      #expect(instance).to be_instance_of(Kubevirt::V1beta1VolumePreferences)
-    end
-  end
-
-  describe 'test attribute "preferred_storage_class_name"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-end

data/spec/models/v1beta1_volume_restore_spec.rb

@@ -1,54 +0,0 @@
-=begin
-#KubeVirt API
-
-#This is KubeVirt API an add-on for Kubernetes.
-
-The version of the OpenAPI document: 1.0.0
-Contact: kubevirt-dev@googlegroups.com
-Generated by: https://openapi-generator.tech
-Generator version: 7.9.0
-
-=end
-
-require 'spec_helper'
-require 'json'
-require 'date'
-
-# Unit tests for Kubevirt::V1beta1VolumeRestore
-# Automatically generated by openapi-generator (https://openapi-generator.tech)
-# Please update as you see appropriate
-describe Kubevirt::V1beta1VolumeRestore do
-  let(:instance) { Kubevirt::V1beta1VolumeRestore.new }
-
-  describe 'test an instance of V1beta1VolumeRestore' do
-    it 'should create an instance of V1beta1VolumeRestore' do
-      # uncomment below to test the instance creation
-      #expect(instance).to be_instance_of(Kubevirt::V1beta1VolumeRestore)
-    end
-  end
-
-  describe 'test attribute "data_volume_name"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "persistent_volume_claim"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "volume_name"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "volume_snapshot_name"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-end

data/spec/models/v1beta1_volume_snapshot_status_spec.rb

@@ -1,54 +0,0 @@
-=begin
-#KubeVirt API
-
-#This is KubeVirt API an add-on for Kubernetes.
-
-The version of the OpenAPI document: 1.0.0
-Contact: kubevirt-dev@googlegroups.com
-Generated by: https://openapi-generator.tech
-Generator version: 7.9.0
-
-=end
-
-require 'spec_helper'
-require 'json'
-require 'date'
-
-# Unit tests for Kubevirt::V1beta1VolumeSnapshotStatus
-# Automatically generated by openapi-generator (https://openapi-generator.tech)
-# Please update as you see appropriate
-describe Kubevirt::V1beta1VolumeSnapshotStatus do
-  let(:instance) { Kubevirt::V1beta1VolumeSnapshotStatus.new }
-
-  describe 'test an instance of V1beta1VolumeSnapshotStatus' do
-    it 'should create an instance of V1beta1VolumeSnapshotStatus' do
-      # uncomment below to test the instance creation
-      #expect(instance).to be_instance_of(Kubevirt::V1beta1VolumeSnapshotStatus)
-    end
-  end
-
-  describe 'test attribute "creation_time"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "error"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "ready_to_use"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-  describe 'test attribute "volume_snapshot_name"' do
-    it 'should work' do
-      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
-    end
-  end
-
-end

data/spec/spec_helper.rb

@@ -1,111 +0,0 @@
-=begin
-#KubeVirt API
-
-#This is KubeVirt API an add-on for Kubernetes.
-
-The version of the OpenAPI document: 1.0.0
-Contact: kubevirt-dev@googlegroups.com
-Generated by: https://openapi-generator.tech
-Generator version: 7.9.0
-
-=end
-
-# load the gem
-require 'kubevirt'
-
-# The following  was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # These two settings work together to allow you to limit a spec run
-  # to individual examples or groups you care about by tagging them with
-  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
-  # get run.
-  config.filter_run :focus
-  config.run_all_when_everything_filtered = true
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end