kruby 1.35.0.5 → 1.36.0.1

data/lib/kubernetes/models/v1_mutating_admission_policy_spec.rb

@@ -0,0 +1,284 @@
+=begin
+#Kubernetes
+
+#No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
+
+The version of the OpenAPI document: release-1.36
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.1.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Kubernetes
+  # MutatingAdmissionPolicySpec defines the desired behavior of the admission policy.
+  class V1MutatingAdmissionPolicySpec
+    # failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings.  A policy is invalid if paramKind refers to a non-existent Kind. A binding is invalid if paramRef.name refers to a non-existent resource.  failurePolicy does not define how validations that evaluate to false are handled.  Allowed values are Ignore or Fail. Defaults to Fail.
+    attr_accessor :failure_policy
+
+    # matchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the matchConstraints. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed.  If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions.  The exact matching logic is (in order):   1. If ANY matchCondition evaluates to FALSE, the policy is skipped.   2. If ALL matchConditions evaluate to TRUE, the policy is evaluated.   3. If any matchCondition evaluates to an error (but none are FALSE):      - If failurePolicy=Fail, reject the request      - If failurePolicy=Ignore, the policy is skipped
+    attr_accessor :match_conditions
+
+    attr_accessor :match_constraints
+
+    # mutations contain operations to perform on matching objects. mutations may not be empty; a minimum of one mutation is required. mutations are evaluated in order, and are reinvoked according to the reinvocationPolicy. The mutations of a policy are invoked for each binding of this policy and reinvocation of mutations occurs on a per binding basis.
+    attr_accessor :mutations
+
+    attr_accessor :param_kind
+
+    # reinvocationPolicy indicates whether mutations may be called multiple times per MutatingAdmissionPolicyBinding as part of a single admission evaluation. Allowed values are \"Never\" and \"IfNeeded\".  Never: These mutations will not be called more than once per binding in a single admission evaluation.  IfNeeded: These mutations may be invoked more than once per binding for a single admission request and there is no guarantee of order with respect to other admission plugins, admission webhooks, bindings of this policy and admission policies.  Mutations are only reinvoked when mutations change the object after this mutation is invoked. Required.
+    attr_accessor :reinvocation_policy
+
+    # variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except matchConditions because matchConditions are evaluated before the rest of the policy.  The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, variables must be sorted by the order of first appearance and acyclic.
+    attr_accessor :variables
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'failure_policy' => :'failurePolicy',
+        :'match_conditions' => :'matchConditions',
+        :'match_constraints' => :'matchConstraints',
+        :'mutations' => :'mutations',
+        :'param_kind' => :'paramKind',
+        :'reinvocation_policy' => :'reinvocationPolicy',
+        :'variables' => :'variables'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'failure_policy' => :'String',
+        :'match_conditions' => :'Array<V1MatchCondition>',
+        :'match_constraints' => :'V1MatchResources',
+        :'mutations' => :'Array<V1Mutation>',
+        :'param_kind' => :'V1ParamKind',
+        :'reinvocation_policy' => :'String',
+        :'variables' => :'Array<V1Variable>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubernetes::V1MutatingAdmissionPolicySpec` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubernetes::V1MutatingAdmissionPolicySpec`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'failure_policy')
+        self.failure_policy = attributes[:'failure_policy']
+      end
+
+      if attributes.key?(:'match_conditions')
+        if (value = attributes[:'match_conditions']).is_a?(Array)
+          self.match_conditions = value
+        end
+      end
+
+      if attributes.key?(:'match_constraints')
+        self.match_constraints = attributes[:'match_constraints']
+      end
+
+      if attributes.key?(:'mutations')
+        if (value = attributes[:'mutations']).is_a?(Array)
+          self.mutations = value
+        end
+      end
+
+      if attributes.key?(:'param_kind')
+        self.param_kind = attributes[:'param_kind']
+      end
+
+      if attributes.key?(:'reinvocation_policy')
+        self.reinvocation_policy = attributes[:'reinvocation_policy']
+      end
+
+      if attributes.key?(:'variables')
+        if (value = attributes[:'variables']).is_a?(Array)
+          self.variables = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          failure_policy == o.failure_policy &&
+          match_conditions == o.match_conditions &&
+          match_constraints == o.match_constraints &&
+          mutations == o.mutations &&
+          param_kind == o.param_kind &&
+          reinvocation_policy == o.reinvocation_policy &&
+          variables == o.variables
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [failure_policy, match_conditions, match_constraints, mutations, param_kind, reinvocation_policy, variables].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Kubernetes.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/kubernetes/models/v1_mutating_webhook.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0
@@ -16,21 +16,21 @@ require 'time'
 module Kubernetes
   # MutatingWebhook describes an admission webhook and the resources and operations it applies to.
   class V1MutatingWebhook
-    # AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
+    # admissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.
     attr_accessor :admission_review_versions
 
     attr_accessor :client_config
 
-    # FailurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
+    # failurePolicy defines how unrecognized errors from the admission endpoint are handled - allowed values are Ignore or Fail. Defaults to Fail.
     attr_accessor :failure_policy
 
-    # MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed.  The exact matching logic is (in order):   1. If ANY matchCondition evaluates to FALSE, the webhook is skipped.   2. If ALL matchConditions evaluate to TRUE, the webhook is called.   3. If any matchCondition evaluates to an error (but none are FALSE):      - If failurePolicy=Fail, reject the request      - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
+    # matchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed.  The exact matching logic is (in order):   1. If ANY matchCondition evaluates to FALSE, the webhook is skipped.   2. If ALL matchConditions evaluate to TRUE, the webhook is called.   3. If any matchCondition evaluates to an error (but none are FALSE):      - If failurePolicy=Fail, reject the request      - If failurePolicy=Ignore, the error is ignored and the webhook is skipped
     attr_accessor :match_conditions
 
     # matchPolicy defines how the \"rules\" list is used to match incoming requests. Allowed values are \"Exact\" or \"Equivalent\".  - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but \"rules\" only included `apiGroups:[\"apps\"], apiVersions:[\"v1\"], resources: [\"deployments\"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook.  - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and \"rules\" only included `apiGroups:[\"apps\"], apiVersions:[\"v1\"], resources: [\"deployments\"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook.  Defaults to \"Equivalent\"
     attr_accessor :match_policy
 
-    # The name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where \"imagepolicy\" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
+    # name is the name of the admission webhook. Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where \"imagepolicy\" is the name of the webhook, and kubernetes.io is the name of the organization. Required.
     attr_accessor :name
 
     attr_accessor :namespace_selector
@@ -40,13 +40,13 @@ module Kubernetes
     # reinvocationPolicy indicates whether this webhook should be called multiple times as part of a single admission evaluation. Allowed values are \"Never\" and \"IfNeeded\".  Never: the webhook will not be called more than once in a single admission evaluation.  IfNeeded: the webhook will be called at least one additional time as part of the admission evaluation if the object being admitted is modified by other admission plugins after the initial webhook call. Webhooks that specify this option *must* be idempotent, able to process objects they previously admitted. Note: * the number of additional invocations is not guaranteed to be exactly one. * if additional invocations result in further modifications to the object, webhooks are not guaranteed to be invoked again. * webhooks that use this option may be reordered to minimize the number of additional invocations. * to validate an object after all mutations are guaranteed complete, use a validating admission webhook instead.  Defaults to \"Never\".
     attr_accessor :reinvocation_policy
 
-    # Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
+    # rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.
     attr_accessor :rules
 
-    # SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
+    # sideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.
     attr_accessor :side_effects
 
-    # TimeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.
+    # timeoutSeconds specifies the timeout for this webhook. After the timeout passes, the webhook call will be ignored or the API call will fail based on the failure policy. The timeout value must be between 1 and 30 seconds. Default to 10 seconds.
     attr_accessor :timeout_seconds
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/kubernetes/models/v1_mutating_webhook_configuration.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0
@@ -24,7 +24,7 @@ module Kubernetes
 
     attr_accessor :metadata
 
-    # Webhooks is a list of webhooks and the affected resources and operations.
+    # webhooks is a list of webhooks and the affected resources and operations.
     attr_accessor :webhooks
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/kubernetes/models/v1_mutating_webhook_configuration_list.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/{v2_api_version_discovery.rb → v1_mutation.rb}

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0
@@ -14,22 +14,21 @@ require 'date'
 require 'time'
 
 module Kubernetes
-  # APIVersionDiscovery holds a list of APIResourceDiscovery types that are served for a particular version within an API Group.
-  class V2APIVersionDiscovery
-    # version is the name of the version within a group version.
-    attr_accessor :version
+  # Mutation specifies the CEL expression which is used to apply the Mutation.
+  class V1Mutation
+    attr_accessor :apply_configuration
 
-    attr_accessor :resources
+    attr_accessor :json_patch
 
-    # freshness marks whether a group version's discovery document is up to date.
-    attr_accessor :freshness
+    # patchType indicates the patch strategy used. Allowed values are \"ApplyConfiguration\" and \"JSONPatch\". Required.
+    attr_accessor :patch_type
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'version' => :'version',
-        :'resources' => :'resources',
-        :'freshness' => :'freshness'
+        :'apply_configuration' => :'applyConfiguration',
+        :'json_patch' => :'jsonPatch',
+        :'patch_type' => :'patchType'
       }
     end
 
@@ -41,9 +40,9 @@ module Kubernetes
     # Attribute type mapping.
     def self.openapi_types
       {
-        :'version' => :'String',
-        :'resources' => :'Array<V2APIResourceDiscovery>',
-        :'freshness' => :'String'
+        :'apply_configuration' => :'V1ApplyConfiguration',
+        :'json_patch' => :'V1JSONPatch',
+        :'patch_type' => :'String'
       }
     end
 
@@ -57,29 +56,27 @@ module Kubernetes
     # @param [Hash] attributes Model attributes in the form of hash
     def initialize(attributes = {})
       if (!attributes.is_a?(Hash))
-        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubernetes::V2APIVersionDiscovery` initialize method"
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Kubernetes::V1Mutation` initialize method"
       end
 
       # check to see if the attribute exists and convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h|
         if (!self.class.attribute_map.key?(k.to_sym))
-          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubernetes::V2APIVersionDiscovery`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Kubernetes::V1Mutation`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
         end
         h[k.to_sym] = v
       }
 
-      if attributes.key?(:'version')
-        self.version = attributes[:'version']
+      if attributes.key?(:'apply_configuration')
+        self.apply_configuration = attributes[:'apply_configuration']
       end
 
-      if attributes.key?(:'resources')
-        if (value = attributes[:'resources']).is_a?(Array)
-          self.resources = value
-        end
+      if attributes.key?(:'json_patch')
+        self.json_patch = attributes[:'json_patch']
       end
 
-      if attributes.key?(:'freshness')
-        self.freshness = attributes[:'freshness']
+      if attributes.key?(:'patch_type')
+        self.patch_type = attributes[:'patch_type']
       end
     end
 
@@ -87,8 +84,8 @@ module Kubernetes
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if @version.nil?
-        invalid_properties.push('invalid value for "version", version cannot be nil.')
+      if @patch_type.nil?
+        invalid_properties.push('invalid value for "patch_type", patch_type cannot be nil.')
       end
 
       invalid_properties
@@ -97,7 +94,7 @@ module Kubernetes
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if @version.nil?
+      return false if @patch_type.nil?
       true
     end
 
@@ -106,9 +103,9 @@ module Kubernetes
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          version == o.version &&
-          resources == o.resources &&
-          freshness == o.freshness
+          apply_configuration == o.apply_configuration &&
+          json_patch == o.json_patch &&
+          patch_type == o.patch_type
     end
 
     # @see the `==` method
@@ -120,7 +117,7 @@ module Kubernetes
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [version, resources, freshness].hash
+      [apply_configuration, json_patch, patch_type].hash
     end
 
     # Builds the object from hash

data/lib/kubernetes/models/v1_named_rule_with_operations.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0
@@ -16,19 +16,19 @@ require 'time'
 module Kubernetes
   # NamedRuleWithOperations is a tuple of Operations and Resources with ResourceNames.
   class V1NamedRuleWithOperations
-    # APIGroups is the API groups the resources belong to. '*' is all groups. If '*' is present, the length of the slice must be one. Required.
+    # apiGroups is the API groups the resources belong to. '*' is all groups. If '*' is present, the length of the slice must be one. Required.
     attr_accessor :api_groups
 
-    # APIVersions is the API versions the resources belong to. '*' is all versions. If '*' is present, the length of the slice must be one. Required.
+    # apiVersions is the API versions the resources belong to. '*' is all versions. If '*' is present, the length of the slice must be one. Required.
     attr_accessor :api_versions
 
-    # Operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
+    # operations is the operations the admission hook cares about - CREATE, UPDATE, DELETE, CONNECT or * for all of those operations and any future admission operations that are added. If '*' is present, the length of the slice must be one. Required.
     attr_accessor :operations
 
-    # ResourceNames is an optional white list of names that the rule applies to.  An empty set means that everything is allowed.
+    # resourceNames is an optional white list of names that the rule applies to.  An empty set means that everything is allowed.
     attr_accessor :resource_names
 
-    # Resources is a list of resources this rule applies to.  For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '*' means all resources, but not subresources. 'pods/*' means all subresources of pods. '*/scale' means all scale subresources. '*/*' means all resources and their subresources.  If wildcard is present, the validation rule will ensure resources do not overlap with each other.  Depending on the enclosing object, subresources might not be allowed. Required.
+    # resources is a list of resources this rule applies to.  For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '*' means all resources, but not subresources. 'pods/*' means all subresources of pods. '*/scale' means all scale subresources. '*/*' means all resources and their subresources.  If wildcard is present, the validation rule will ensure resources do not overlap with each other.  Depending on the enclosing object, subresources might not be allowed. Required.
     attr_accessor :resources
 
     # scope specifies the scope of this rule. Valid values are \"Cluster\", \"Namespaced\", and \"*\" \"Cluster\" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. \"Namespaced\" means that only namespaced resources will match this rule. \"*\" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is \"*\".

data/lib/kubernetes/models/v1_namespace.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_namespace_condition.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_namespace_list.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_namespace_spec.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_namespace_status.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_network_device_data.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0
@@ -16,10 +16,10 @@ require 'time'
 module Kubernetes
   # NetworkDeviceData provides network-related details for the allocated device. This information may be filled by drivers or other components to configure or identify the device within a network context.
   class V1NetworkDeviceData
-    # HardwareAddress represents the hardware address (e.g. MAC Address) of the device's network interface.  Must not be longer than 128 characters.
+    # HardwareAddress represents the hardware address (e.g. MAC Address) of the device's network interface.  Must not be longer than 128 bytes.
     attr_accessor :hardware_address
 
-    # InterfaceName specifies the name of the network interface associated with the allocated device. This might be the name of a physical or virtual network interface being configured in the pod.  Must not be longer than 256 characters.
+    # InterfaceName specifies the name of the network interface associated with the allocated device. This might be the name of a physical or virtual network interface being configured in the pod.  Must not be longer than 256 bytes.
     attr_accessor :interface_name
 
     # IPs lists the network addresses assigned to the device's network interface. This can include both IPv4 and IPv6 addresses. The IPs are in the CIDR notation, which includes both the address and the associated subnet mask. e.g.: \"192.0.2.5/24\" for IPv4 and \"2001:db8::5/64\" for IPv6.

data/lib/kubernetes/models/v1_network_policy.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_network_policy_egress_rule.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_network_policy_ingress_rule.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0

data/lib/kubernetes/models/v1_network_policy_list.rb

@@ -3,7 +3,7 @@
 
 #No description provided (generated by Openapi Generator https://github.com/openapitools/openapi-generator)
 
-The version of the OpenAPI document: release-1.35
+The version of the OpenAPI document: release-1.36
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.1.0