knife-windows 1.2.1 → 1.3.0

data/spec/unit/knife/wsman_test_spec.rb

@@ -1,202 +1,202 @@
-#
-# Author:: Steven Murawski (<smurawski@chef.io>)
-# Copyright:: Copyright (c) 2015 Chef Software, Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require 'spec_helper'
-
-describe Chef::Knife::WsmanTest do
-  let(:http_client_mock) { HTTPClient.new }
-
-  before(:all) do
-    Chef::Config.reset
-  end
-
-  before(:each) do
-    allow(HTTPClient).to receive(:new).and_return(http_client_mock)
-    subject.config[:verbosity] = 0
-    allow(subject.ui).to receive(:ask).and_return('prompted_password')
-  end
-
-  subject { Chef::Knife::WsmanTest.new(['-m', 'localhost']) }
-
-  context 'when testing the WSMAN endpoint' do
-    context 'and the service does not respond' do
-      error_message = 'A connection attempt failed because the connected party did not properly respond after a period of time.'
-
-      before(:each) do
-        allow(http_client_mock).to receive(:post).and_raise(Exception.new(error_message))
-      end
-
-      it 'exits with a status code of 1' do
-        expect(subject).to receive(:exit).with(1)
-        subject.run
-      end
-
-      it 'writes a warning message for each node it fails to connect to' do
-        expect(subject.ui).to receive(:warn)
-        expect(subject).to receive(:exit).with(1)
-        subject.run
-      end
-
-      it 'writes an error message if it fails to connect to any nodes' do
-        expect(subject.ui).to receive(:error)
-        expect(subject).to receive(:exit).with(1)
-        subject.run
-      end
-    end
-
-    context 'and the service responds' do
-      context 'successfully' do
-        it 'writes a message about a successful connection' do
-          response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
-          http_response_mock = HTTP::Message.new_response(response_body)
-          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-          expect(subject.ui).to receive(:msg)
-          subject.run
-        end
-      end
-
-      context 'with an invalid body' do
-        it 'warns for a failed connection and exit with a status of 1' do
-          response_body = 'I am invalid'
-          http_response_mock = HTTP::Message.new_response(response_body)
-          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-          expect(subject.ui).to receive(:warn)
-          expect(subject.ui).to receive(:error)
-          expect(subject).to receive(:exit).with(1)
-          subject.run
-        end
-      end
-
-      context 'with a non-200 code' do
-        it 'warns for a failed connection and exits with a status of 1' do
-          http_response_mock = HTTP::Message.new_response('<resp></resp>')
-          http_response_mock.status = 404
-          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-          expect(subject.ui).to receive(:warn)
-          expect(subject.ui).to receive(:error)
-          expect(subject).to receive(:exit).with(1)
-          subject.run
-        end
-      end
-    end
-  end
-
-  context 'when not validating ssl cert' do
-    before(:each) do
-      response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
-      allow(http_client_mock).to receive(:post).and_return(HTTP::Message.new_response(response_body))
-      expect(subject.ui).to receive(:msg)
-      subject.config[:winrm_ssl_verify_mode] = :verify_none
-      subject.config[:winrm_transport] = :ssl
-    end
-
-    it 'sets verify_mode to verify_none' do
-      subject.run
-      expect(http_client_mock.ssl_config.verify_mode).to eq(OpenSSL::SSL::VERIFY_NONE)
-    end
-  end
-
-  context 'when testing the WSMAN endpoint with verbose output' do
-    before(:each) do
-      subject.config[:verbosity] = 1
-    end
-
-    context 'and the service does not respond' do
-      it 'returns an object with an error message' do
-        error_message = 'A connection attempt failed because the connected party did not properly respond after a period of time.'
-        allow(http_client_mock).to receive(:post).and_raise(Exception.new(error_message))
-        expect(subject).to receive(:exit).with(1)
-        expect(subject).to receive(:output) do |output|
-          expect(output.error_message).to  match(/#{error_message}/)
-        end
-        subject.run
-      end
-    end
-
-    context 'with an invalid body' do
-      it 'includes invalid body in error message' do
-        response_body = 'I am invalid'
-        http_response_mock = HTTP::Message.new_response(response_body)
-        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-        expect(subject).to receive(:exit).with(1)
-        expect(subject).to receive(:output) do |output|
-          expect(output.error_message).to  match(/#{response_body}/)
-        end
-        subject.run
-      end
-    end
-
-    context 'and the target node is Windows Server 2008 R2' do
-      before(:each) do
-        ws2008r2_response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
-        http_response_mock = HTTP::Message.new_response(ws2008r2_response_body)
-        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-      end
-
-      it 'identifies the stack of the product version as 2.0 ' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.product_version).to  eq 'OS: 0.0.0 SP: 0.0 Stack: 2.0'
-        end
-        subject.run
-      end
-
-      it 'identifies the protocol version as the current DMTF standard' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.protocol_version).to  eq 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
-        end
-        subject.run
-      end
-
-      it 'identifies the vendor as the Microsoft Corporation' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.product_vendor).to  eq 'Microsoft Corporation'
-        end
-        subject.run
-      end
-    end
-
-    context 'and the target node is Windows Server 2012 R2' do
-      before(:each) do
-        ws2012_response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 3.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
-        http_response_mock = HTTP::Message.new_response(ws2012_response_body)
-        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
-      end
-
-      it 'identifies the stack of the product version as 3.0 ' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.product_version).to  eq 'OS: 0.0.0 SP: 0.0 Stack: 3.0'
-        end
-        subject.run
-      end
-
-      it 'identifies the protocol version as the current DMTF standard' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.protocol_version).to  eq 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
-        end
-        subject.run
-      end
-
-      it 'identifies the vendor as the Microsoft Corporation' do
-        expect(subject).to receive(:output) do |output|
-          expect(output.product_vendor).to  eq 'Microsoft Corporation'
-        end
-        subject.run
-      end
-    end
-  end
+#
+# Author:: Steven Murawski (<smurawski@chef.io>)
+# Copyright:: Copyright (c) 2015 Chef Software, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'spec_helper'
+
+describe Chef::Knife::WsmanTest do
+  let(:http_client_mock) { HTTPClient.new }
+
+  before(:all) do
+    Chef::Config.reset
+  end
+
+  before(:each) do
+    allow(HTTPClient).to receive(:new).and_return(http_client_mock)
+    subject.config[:verbosity] = 0
+    allow(subject.ui).to receive(:ask).and_return('prompted_password')
+  end
+
+  subject { Chef::Knife::WsmanTest.new(['-m', 'localhost']) }
+
+  context 'when testing the WSMAN endpoint' do
+    context 'and the service does not respond' do
+      error_message = 'A connection attempt failed because the connected party did not properly respond after a period of time.'
+
+      before(:each) do
+        allow(http_client_mock).to receive(:post).and_raise(Exception.new(error_message))
+      end
+
+      it 'exits with a status code of 1' do
+        expect(subject).to receive(:exit).with(1)
+        subject.run
+      end
+
+      it 'writes a warning message for each node it fails to connect to' do
+        expect(subject.ui).to receive(:warn)
+        expect(subject).to receive(:exit).with(1)
+        subject.run
+      end
+
+      it 'writes an error message if it fails to connect to any nodes' do
+        expect(subject.ui).to receive(:error)
+        expect(subject).to receive(:exit).with(1)
+        subject.run
+      end
+    end
+
+    context 'and the service responds' do
+      context 'successfully' do
+        it 'writes a message about a successful connection' do
+          response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
+          http_response_mock = HTTP::Message.new_response(response_body)
+          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+          expect(subject.ui).to receive(:msg)
+          subject.run
+        end
+      end
+
+      context 'with an invalid body' do
+        it 'warns for a failed connection and exit with a status of 1' do
+          response_body = 'I am invalid'
+          http_response_mock = HTTP::Message.new_response(response_body)
+          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+          expect(subject.ui).to receive(:warn)
+          expect(subject.ui).to receive(:error)
+          expect(subject).to receive(:exit).with(1)
+          subject.run
+        end
+      end
+
+      context 'with a non-200 code' do
+        it 'warns for a failed connection and exits with a status of 1' do
+          http_response_mock = HTTP::Message.new_response('<resp></resp>')
+          http_response_mock.status = 404
+          allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+          expect(subject.ui).to receive(:warn)
+          expect(subject.ui).to receive(:error)
+          expect(subject).to receive(:exit).with(1)
+          subject.run
+        end
+      end
+    end
+  end
+
+  context 'when not validating ssl cert' do
+    before(:each) do
+      response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
+      allow(http_client_mock).to receive(:post).and_return(HTTP::Message.new_response(response_body))
+      expect(subject.ui).to receive(:msg)
+      subject.config[:winrm_ssl_verify_mode] = :verify_none
+      subject.config[:winrm_transport] = :ssl
+    end
+
+    it 'sets verify_mode to verify_none' do
+      subject.run
+      expect(http_client_mock.ssl_config.verify_mode).to eq(OpenSSL::SSL::VERIFY_NONE)
+    end
+  end
+
+  context 'when testing the WSMAN endpoint with verbose output' do
+    before(:each) do
+      subject.config[:verbosity] = 1
+    end
+
+    context 'and the service does not respond' do
+      it 'returns an object with an error message' do
+        error_message = 'A connection attempt failed because the connected party did not properly respond after a period of time.'
+        allow(http_client_mock).to receive(:post).and_raise(Exception.new(error_message))
+        expect(subject).to receive(:exit).with(1)
+        expect(subject).to receive(:output) do |output|
+          expect(output.error_message).to  match(/#{error_message}/)
+        end
+        subject.run
+      end
+    end
+
+    context 'with an invalid body' do
+      it 'includes invalid body in error message' do
+        response_body = 'I am invalid'
+        http_response_mock = HTTP::Message.new_response(response_body)
+        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+        expect(subject).to receive(:exit).with(1)
+        expect(subject).to receive(:output) do |output|
+          expect(output.error_message).to  match(/#{response_body}/)
+        end
+        subject.run
+      end
+    end
+
+    context 'and the target node is Windows Server 2008 R2' do
+      before(:each) do
+        ws2008r2_response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 2.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
+        http_response_mock = HTTP::Message.new_response(ws2008r2_response_body)
+        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+      end
+
+      it 'identifies the stack of the product version as 2.0 ' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.product_version).to  eq 'OS: 0.0.0 SP: 0.0 Stack: 2.0'
+        end
+        subject.run
+      end
+
+      it 'identifies the protocol version as the current DMTF standard' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.protocol_version).to  eq 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
+        end
+        subject.run
+      end
+
+      it 'identifies the vendor as the Microsoft Corporation' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.product_vendor).to  eq 'Microsoft Corporation'
+        end
+        subject.run
+      end
+    end
+
+    context 'and the target node is Windows Server 2012 R2' do
+      before(:each) do
+        ws2012_response_body = '<s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope"><s:Header/><s:Body><wsmid:IdentifyResponse xmlns:wsmid="http://schemas.dmtf.org/wbem/wsman/identity/1/wsmanidentity.xsd"><wsmid:ProtocolVersion>http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd</wsmid:ProtocolVersion><wsmid:ProductVendor>Microsoft Corporation</wsmid:ProductVendor><wsmid:ProductVersion>OS: 0.0.0 SP: 0.0 Stack: 3.0</wsmid:ProductVersion></wsmid:IdentifyResponse></s:Body></s:Envelope>'
+        http_response_mock = HTTP::Message.new_response(ws2012_response_body)
+        allow(http_client_mock).to receive(:post).and_return(http_response_mock)
+      end
+
+      it 'identifies the stack of the product version as 3.0 ' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.product_version).to  eq 'OS: 0.0.0 SP: 0.0 Stack: 3.0'
+        end
+        subject.run
+      end
+
+      it 'identifies the protocol version as the current DMTF standard' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.protocol_version).to  eq 'http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd'
+        end
+        subject.run
+      end
+
+      it 'identifies the vendor as the Microsoft Corporation' do
+        expect(subject).to receive(:output) do |output|
+          expect(output.product_vendor).to  eq 'Microsoft Corporation'
+        end
+        subject.run
+      end
+    end
+  end
 end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: knife-windows
 version: !ruby/object:Gem::Version
-  version: 1.2.1
+  version: 1.3.0
 platform: ruby
 authors:
 - Seth Chisamore
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2016-02-09 00:00:00.000000000 Z
+date: 2016-02-19 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: winrm
@@ -16,14 +16,14 @@ dependencies:
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.6'
+        version: '1.7'
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.6'
+        version: '1.7'
 - !ruby/object:Gem::Dependency
   name: pry
   requirement: !ruby/object:Gem::Requirement