knife-vcair 0.6.1

data/lib/chef/knife/vcair_ip_list.rb

@@ -0,0 +1,59 @@
+#
+# Author:: Matt Ray (<matt@getchef.com>)
+# Copyright:: Copyright (c) 2014 Chef Software, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/knife/cloud/list_resource_command'
+require 'chef/knife/vcair_helpers'
+require 'chef/knife/cloud/vcair_service_options'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairIpList < ResourceListCommand
+        include VcairHelpers
+        include VcairServiceOptions
+
+        banner "knife vcair ip list (options)"
+
+        def query_resource
+          # TODO: this doesn't work yet, this in inside the routers
+          org.networks
+        end
+
+        def before_exec_command
+          @columns_with_info = [
+            {:label => 'Name', :key => 'name'},
+            {:label => 'Gateway', :key => 'gateway'},
+            {:label => 'IP Range Start', :key => 'ip_ranges', :value_callback => method(:start_address) },
+            {:label => 'End', :key => 'ip_ranges', :value_callback => method(:end_address) },
+            {:label => 'Description', :key => 'description'}
+          ]
+          @sort_by_field = "name"
+        end
+
+        def start_address(ranges)
+          ranges[0][:start_address]
+        end
+
+        def end_address(ranges)
+          ranges[0][:end_address]
+        end
+
+      end
+    end
+  end
+end

data/lib/chef/knife/vcair_network_list.rb

@@ -0,0 +1,57 @@
+#
+# Author:: Matt Ray (<matt@getchef.com>)
+# Copyright:: Copyright (c) 2014 Chef Software, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/knife/cloud/list_resource_command'
+require 'chef/knife/vcair_helpers'
+require 'chef/knife/cloud/vcair_service_options'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairNetworkList < ResourceListCommand
+        include VcairHelpers
+        include VcairServiceOptions
+
+        banner "knife vcair network list (options)"
+
+        def query_resource
+          org.networks
+        end
+
+        def before_exec_command
+          @columns_with_info = [
+            {:label => 'Name', :key => 'name'},
+            {:label => 'Gateway', :key => 'gateway'},
+            {:label => 'IP Range Start', :key => 'ip_ranges', :value_callback => method(:start_address) },
+            {:label => 'End', :key => 'ip_ranges', :value_callback => method(:end_address) },
+            {:label => 'Description', :key => 'description'}
+          ]
+          @sort_by_field = "name"
+        end
+
+        def start_address(ranges)
+          ranges[0][:start_address]
+        end
+
+        def end_address(ranges)
+          ranges[0][:end_address]
+        end
+      end
+    end
+  end
+end

data/lib/chef/knife/vcair_server_create.rb

@@ -0,0 +1,231 @@
+#
+# Author:: 
+# Copyright:: 
+#
+
+require 'chef/knife/cloud/server/create_command'
+require 'chef/knife/vcair_helpers'
+require 'chef/knife/cloud/vcair_server_create_options'
+require 'chef/knife/cloud/vcair_service'
+require 'chef/knife/cloud/vcair_service_options'
+require 'chef/knife/cloud/exceptions'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairServerCreate < ServerCreateCommand
+        include VcairHelpers
+        include VcairServiceOptions
+        include VcairServerCreateOptions
+
+        deps do
+          require 'chef/knife/winrm_base'
+          require 'winrm'
+          require 'em-winrm'
+          require 'chef/json_compat'
+          require 'chef/knife/bootstrap'
+          require 'chef/knife/bootstrap_windows_winrm'
+          require 'chef/knife/core/windows_bootstrap_context'
+          require 'chef/knife/winrm'
+          Chef::Knife::Bootstrap.load_deps
+        end
+
+        banner "knife vcair server create (options)"
+
+        def execute_command
+          instantiate
+          update_customization
+          if config_value(:vcair_cpus)
+            vm.cpu = config_value(:vcair_cpus)
+          end
+          if config_value(:vcair_memory)
+            vm.memory = config_value(:vcair_memory)
+          end
+          update_network
+          vm.power_on
+        end
+
+        def set_image_os_type
+          # TODO: Pull Template VM OS Type
+          # config[:image_os_type] = (ami.platform == 'windows') ?  'windows' :  'linux'
+        end
+
+        # def before_exec_command
+        #   @create_options = {
+        #     :server_def => {
+        #       :name => config[:chef_node_name],
+        #       :image_ref => config_value(:image),
+              
+        #     },
+        #     :server_create_timeout => config_value(:server_create_timeout)
+        #   }
+          
+        #   if config_value(:vcair_custom_script)
+        #     @create_options[:server_def].merge!({
+        #                     customization_script: config_value(:vcair_custom_script)})
+        #   end
+        #   if config_value(:vcair_cpus)
+        #     @create_options[:server_def].merge!({:cpus => config_value(:vcair_cpus)})
+        #   end
+        #   if config_value(:vcair_memory)
+        #     @create_options[:server_def].merge!({:memory => config_value(:vcair_memory)})
+        #   end
+
+        #   Chef::Log.debug("Create server params - server_def = #{@create_options[:server_def]}")
+        #   @columns_with_info = []
+        #   super
+        # end
+
+        # Setup the floating ip after server creation.
+        # def after_exec_command
+          # TODO: Add NAT rules optionally?
+
+          # Any action you want to perform post VM creation in your cloud.
+          # Example say assigning floating IP to the newly created VM.
+          # Make calls to "service" object if you need any information for cloud,
+          #    example service.connection.addresses
+          # Make call to "server" object if you want set properties on newly created VM,
+          #   example server.associate_address(floating_address)
+          # super
+      #end
+
+        def before_bootstrap
+          super
+          vm.reload
+          Chef::Log.debug("Bootstrap IP Address: #{bootstrap_ip_address}")
+          # If we start using auto_generated passwords, we might need this
+          # Chef::Config[:ssh_password] = vm.customization.admin_password
+          if bootstrap_ip_address.nil?
+            error_message = "No IP address available for bootstrapping."
+            ui.error(error_message)
+            raise CloudExceptions::BootstrapError, error_message
+          end
+          config[:bootstrap_ip_address] = bootstrap_ip_address
+        end
+
+        def validate_params!
+          # TODO: validate required params
+          super
+          errors = []
+          case config_value(:bootstrap_protocol)
+          when 'winrm'
+            password = config_value(:winrm_password)
+            errors << "WinRM requires a password on Vcair" unless password
+            batch_file = config_value(:vcair_customization_script)
+            if ::File.exists? batch_file
+              batch_contents = open(batch_file).read
+              if not batch_contents.match /#{password}/
+                errors << "WinRM customization script must set password"
+              end
+            else
+              errors << """
+WinRM requires a customization_script on Vcair
+The batch file should setup winrm and set the password
+An example is available at:
+https://raw.githubusercontent.com/vulk/knife-vchs/server-create/install-winrm-vcair-example.bat
+"""
+            end
+          when 'ssh'
+            errors << "SSH requires a password on Vcair" unless config_value(:ssh_password)
+          end
+
+          # errors << "your error message" if some_param_undefined
+          # TODO: Error out if windows users don't provide a password
+          # AND maybe even force a batch file and check that the password
+          # is in it
+          error_message = "We are very sorry that you will be unable to continue"
+          raise CloudExceptions::ValidationError, error_message if errors.each{|e| ui.error(e); error_message = "#{error_message} #{e}."}.any?
+        end
+
+        private
+
+        def instantiate
+          begin
+            node_name = config_value(:chef_node_name)
+            template.instantiate(
+                                 node_name,
+                                 vdc_id: vdc.id,
+                                 network_id: net.id,
+                                 description: "id:#{node_name}")
+          rescue CloudExceptions::ServerCreateError => e
+            raise e
+          end
+        end
+        
+        def update_customization
+          ## Initialization before first power on.
+          c=vm.customization
+          
+          if config_value(:vcair_customization_script)
+            c.script = open(config_value(:vcair_customization_script)).read
+          end
+          
+          password = case config_value(:bootstrap_protocol)
+                     when 'winrm'
+                       config_value(:winrm_password)
+                     when 'ssh'
+                       config_value(:ssh_password)
+                     end
+          if password
+            c.admin_password =  password 
+            c.admin_password_auto = false
+            c.reset_password_required = false
+          else
+            # Password will be autogenerated
+            c.admin_password_auto=true
+            # API will force password resets when auto is enabled
+            c.reset_password_required = true
+          end
+          
+          # TODO: Add support for admin_auto_logon to fog
+          # c.admin_auto_logon_count = 100
+          # c.admin_auto_logon_enabled = true
+
+          # DNS and Windows want AlphaNumeric and dashes for hostnames
+          # Windows can only handle 15 character hostnames
+          c.computer_name = config_value(:chef_node_name).gsub(/\W/,"-").slice(0..14)
+          c.enabled = true
+          c.save
+        end
+
+        def update_network
+          ## TODO: allow user to specify network to connect to (see above net used)
+          # Define network connection for vm based on existing routed network
+          nc = vapp.network_config.find { |n| n if n[:networkName].match(net.name) }
+          networks_config = [nc]
+          section = {PrimaryNetworkConnectionIndex: 0}
+          section[:NetworkConnection] = networks_config.compact.each_with_index.map do |network, i|
+            connection = {
+              network: network[:networkName],
+              needsCustomization: true,
+              NetworkConnectionIndex: i,
+              IsConnected: true
+            }
+            ip_address      = network[:ip_address]
+            ## TODO: support config options for allocation mode
+            #allocation_mode = network[:allocation_mode]
+            #allocation_mode = 'manual' if ip_address
+            #allocation_mode = 'dhcp' unless %w{dhcp manual pool}.include?(allocation_mode)
+            #allocation_mode = 'POOL'
+            #connection[:Dns1] = dns1 if dns1
+            allocation_mode = 'pool'
+            connection[:IpAddressAllocationMode] = allocation_mode.upcase
+            connection[:IpAddress] = ip_address if ip_address
+            connection
+          end
+
+          ## attach the network to the vm
+          nc_task = @service.connection.put_network_connection_system_section_vapp(
+            vm.id,section).body
+          @service.connection.process_task(nc_task)
+        end
+
+        def bootstrap_ip_address
+          vm.reload
+          vm.ip_address
+        end
+
+      end
+    end
+  end
+end

data/lib/chef/knife/vcair_server_delete.rb

@@ -0,0 +1,34 @@
+#
+# Author:: Matt Ray (<matt@getchef.com>)
+# Copyright:: Copyright (c) 2014 Chef Software, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/knife/vcair_vm_delete'
+require 'chef/knife/cloud/vcair_service_options'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairServerDelete < VcairVmDelete
+        include VcairServiceOptions
+        include ServerDeleteOptions
+
+        banner "knife vcair server delete INSTANCEID [INSTANCEID] (options)"
+
+      end
+    end
+  end
+end

data/lib/chef/knife/vcair_server_list.rb

@@ -0,0 +1,33 @@
+#
+# Author:: Seth Thomas (<sthomas@getchef.com>)
+# Copyright:: Copyright (c) 2014 Chef Software, Inc.
+# License:: Apache License, Version 2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+require 'chef/knife/vcair_vm_list'
+require 'chef/knife/cloud/vcair_service_options'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairServerList < VcairVmList
+        include VcairServiceOptions
+
+        banner "knife vcair server list (options)"
+
+      end
+    end
+  end
+end

data/lib/chef/knife/vcair_server_show.rb

@@ -0,0 +1,37 @@
+#
+# Author:: 
+# Copyright:: 
+#
+
+require 'chef/knife/cloud/server/show_command'
+require 'chef/knife/vcair_helpers'
+require 'chef/knife/cloud/server/show_options'
+require 'chef/knife/cloud/vcair_service'
+require 'chef/knife/cloud/vcair_service_options'
+require 'chef/knife/cloud/exceptions'
+
+class Chef
+  class Knife
+    class Cloud
+      class VcairServerShow < ServerShowCommand
+        include VcairHelpers
+        include VcairServiceOptions
+        include ServerShowOptions
+
+        banner "knife vcair server show (options)"
+
+        def before_exec_command
+          # TODO - Update the columns info with the keys and callbacks required as per fog object returned for your cloud. Framework looks for 'key' on your server object hash returned by fog. If you need the values to be formatted or if your value is another object that needs to be looked up use value_callback.
+
+          @columns_with_info = [
+            {:label => 'Instance ID', :key => 'id'},
+            {:label => 'Name', :key => 'name'},
+            #...
+          ]
+          super
+        end
+
+      end
+    end
+  end
+end