knife-ionoscloud 6.0.0.beta.2 → 6.0.0

data/docs/subcommands/networkloadbalancer_rule_add.md

@@ -19,6 +19,9 @@ knife ionoscloud networkloadbalancer rule add (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         name of the data center (required)
 
@@ -43,9 +46,6 @@ knife ionoscloud networkloadbalancer rule add (options)
     client_timeout: --client-timeout CLIENT_TIMEOUT
         clientTimeout is expressed in milliseconds. This inactivity timeout applies when the client is expected to acknowledge or send data. If unset the default of 50 seconds will be used.
 
-    check_timeout: --check-timeout CLIENT_TIMEOUT
-        it specifies the time (in milliseconds) for a target VM in this pool to answer the check. If a target VM has CheckInterval set and CheckTimeout is set too, then the smaller value of the two is used after the TCP connection is established.
-
     connect_timeout: --connect-timeout CONNECT_TIMEOUT
         it specifies the maximum time (in milliseconds) to wait for a connection attempt to a target VM to succeed. If unset, the default of 5 seconds will be used.
 
@@ -55,18 +55,21 @@ knife ionoscloud networkloadbalancer rule add (options)
     retries: --retries RETRIES, -r RETRIES
         retries specifies the number of retries to perform on a target VM after a connection failure. If unset, the default value of 3 will be used. (valid range: [0, 65535])
 
+    targets: --targets TARGETS
+        array of targets
+
     ionoscloud_username: --username USERNAME, -u USERNAME
         your Ionoscloud username (required)
 
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud networkloadbalancer rule add --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --name NAME --algorithm ALGORITHM --protocol PROTOCOL --ip LISTENER_IP --port LISTENER_PORT --client-timeout CLIENT_TIMEOUT --check-timeout CLIENT_TIMEOUT --connect-timeout CONNECT_TIMEOUT --terget-timeout TARGET_TIMEOUT --retries RETRIES --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud networkloadbalancer rule add --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --name NAME --algorithm ALGORITHM --protocol PROTOCOL --ip LISTENER_IP --port LISTENER_PORT --client-timeout CLIENT_TIMEOUT --connect-timeout CONNECT_TIMEOUT --terget-timeout TARGET_TIMEOUT --retries RETRIES --targets TARGETS --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/networkloadbalancer_rule_list.md

@@ -16,6 +16,9 @@ knife ionoscloud networkloadbalancer rule list (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the data center (required)
 
@@ -28,12 +31,12 @@ knife ionoscloud networkloadbalancer rule list (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud networkloadbalancer rule list --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud networkloadbalancer rule list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/networkloadbalancer_rule_remove.md

@@ -16,6 +16,9 @@ knife ionoscloud networkloadbalancer rule remove RULE_ID [RULE_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the data center (required)
 
@@ -28,8 +31,8 @@ knife ionoscloud networkloadbalancer rule remove RULE_ID [RULE_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example

data/docs/subcommands/networkloadbalancer_rule_target_add.md

@@ -20,6 +20,9 @@ knife ionoscloud networkloadbalancer rule target add (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         name of the data center (required)
 
@@ -53,12 +56,12 @@ knife ionoscloud networkloadbalancer rule target add (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud networkloadbalancer rule target add --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --weight WEIGTH --check --check-interval CHECK_INTERVAL --maintenance MAINTENANCE --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud networkloadbalancer rule target add --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --weight WEIGTH --check --check-interval CHECK_INTERVAL --maintenance MAINTENANCE --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/networkloadbalancer_rule_target_list.md

@@ -17,6 +17,9 @@ knife ionoscloud networkloadbalancer rule target list (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the data center (required)
 
@@ -32,12 +35,12 @@ knife ionoscloud networkloadbalancer rule target list (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud networkloadbalancer rule target list --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud networkloadbalancer rule target list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/networkloadbalancer_rule_target_remove.md

@@ -19,6 +19,9 @@ knife ionoscloud networkloadbalancer rule target remove (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         name of the data center (required)
 
@@ -40,12 +43,12 @@ knife ionoscloud networkloadbalancer rule target remove (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud networkloadbalancer rule target remove --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud networkloadbalancer rule target remove --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --ip IP --port PORT --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/networkloadbalancer_rule_update.md

@@ -0,0 +1,75 @@
+# NetworkloadbalancerRuleUpdate
+
+Updates information about a Ionoscloud Network Load Balancer.
+
+```text
+knife ionoscloud networkloadbalancer rule update (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    forwarding_rule_id: --forwarding-rule FORWARDING_RULE_ID, -R FORWARDING_RULE_ID
+        iD of the Network Loadbalancer Forwarding Rule
+
+    name: --name NAME, -n NAME
+        a name of that Network Load Balancer forwarding rule
+
+    algorithm: --algorithm ALGORITHM, -a ALGORITHM
+        algorithm for the balancing
+
+    protocol: --protocol PROTOCOL
+        protocol of the balancing
+
+    listener_ip: --ip LISTENER_IP, -i LISTENER_IP
+        listening IP. (inbound)
+
+    listener_port: --port LISTENER_PORT, -p LISTENER_PORT
+        listening port number. (inbound) (range: 1 to 65535)
+
+    client_timeout: --client-timeout CLIENT_TIMEOUT
+        clientTimeout is expressed in milliseconds. This inactivity timeout applies when the client is expected to acknowledge or send data. If unset the default of 50 seconds will be used.
+
+    connect_timeout: --connect-timeout CONNECT_TIMEOUT
+        it specifies the maximum time (in milliseconds) to wait for a connection attempt to a target VM to succeed. If unset, the default of 5 seconds will be used.
+
+    target_timeout: --terget-timeout TARGET_TIMEOUT
+        targetTimeout specifies the maximum inactivity time (in milliseconds) on the target VM side. If unset, the default of 50 seconds will be used.
+
+    retries: --retries RETRIES, -r RETRIES
+        retries specifies the number of retries to perform on a target VM after a connection failure. If unset, the default value of 3 will be used. (valid range: [0, 65535])
+
+    targets: --targets TARGETS
+        array of targets
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer rule update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --forwarding-rule FORWARDING_RULE_ID --name NAME --algorithm ALGORITHM --protocol PROTOCOL --ip LISTENER_IP --port LISTENER_PORT --client-timeout CLIENT_TIMEOUT --connect-timeout CONNECT_TIMEOUT --terget-timeout TARGET_TIMEOUT --retries RETRIES --targets TARGETS --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/networkloadbalancer_update.md

@@ -0,0 +1,57 @@
+# NetworkloadbalancerUpdate
+
+Updates information about a Ionoscloud Network Load Balancer.
+
+```text
+knife ionoscloud networkloadbalancer update (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* network\_loadbalancer\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    network_loadbalancer_id: --network-loadbalancer NETWORK_LOADBALANCER_ID, -L NETWORK_LOADBALANCER_ID
+        iD of the Network Loadbalancer (required)
+
+    name: --name NAME, -n NAME
+        name of the load balancer
+
+    listener_lan: --listener-lan LISTENER_LAN_ID, -l LISTENER_LAN_ID
+        id of the listening LAN. (inbound)
+
+    target_lan: --target-lan TARGET_LAN_ID, -t TARGET_LAN_ID
+        id of the balanced private target LAN. (outbound)
+
+    ips: --ips IP[,IP,...], -i IP[,IP,...]
+        collection of IP addresses of the Network Load Balancer. (inbound and outbound) IP of the listenerLan must be a customer reserved IP for the public load balancer and private IP for the private load balancer.
+
+    lb_private_ips: --private-ips IP[,IP,...]
+        collection of private IP addresses with subnet mask of the Network Load Balancer. IPs must contain valid subnet mask. If user will not provide any IP then the system will generate one IP with /24 subnet.
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud networkloadbalancer update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --network-loadbalancer NETWORK_LOADBALANCER_ID --name NAME --listener-lan LISTENER_LAN_ID --target-lan TARGET_LAN_ID --ips IP[,IP,...] --private-ips IP[,IP,...] --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/nic_create.md

@@ -17,6 +17,9 @@ knife ionoscloud nic create (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         name of the data center (required)
 
@@ -29,14 +32,14 @@ knife ionoscloud nic create (options)
     ips: --ips IP[,IP,...], -i IP[,IP,...]
         iPs assigned to the NIC
 
-    dhcp: --dhcp, -d
+    dhcp: --dhcp DHCP
         set to false if you wish to disable DHCP
 
     lan: --lan ID, -l ID
         the LAN ID the NIC will reside on; if the LAN ID does not exist it will be created (required)
 
-    firewall_type: --firewall-type FIREWALL_TYPE, -t FIREWALL_TYPE
-        the type of firewall rules that will be allowed on the NIC. If it is not specified it will take the default value INGRESS
+    nat: --nat NAT
+        set to enable NAT on the NIC
 
     ionoscloud_username: --username USERNAME, -u USERNAME
         your Ionoscloud username (required)
@@ -44,12 +47,12 @@ knife ionoscloud nic create (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic create --datacenter-id DATACENTER_ID --server-id SERVER_ID --name NAME --ips IP[,IP,...] --dhcp --lan ID --firewall-type FIREWALL_TYPE --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic create --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/nic_delete.md

@@ -16,11 +16,14 @@ knife ionoscloud nic delete NIC_ID [NIC_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the data center (required)
 
     server_id: --server-id SERVER_ID, -S SERVER_ID
-        the ID of the server assigned the NIC (required)
+        the ID of the server to which the NIC is assigned (required)
 
     ionoscloud_username: --username USERNAME, -u USERNAME
         your Ionoscloud username (required)
@@ -28,8 +31,8 @@ knife ionoscloud nic delete NIC_ID [NIC_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example

data/docs/subcommands/nic_get.md

@@ -0,0 +1,46 @@
+# NicGet
+
+Retrieves the attributes of a given NIC.
+
+```text
+knife ionoscloud nic get (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* server\_id
+* nic\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    server_id: --server-id SERVER_ID, -S SERVER_ID
+        the ID of the server to which the NIC is assigned (required)
+
+    nic_id: --nic-id NIC_ID, -N NIC_ID
+        iD of the load balancer (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud nic get --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/nic_list.md

@@ -16,6 +16,9 @@ knife ionoscloud nic list (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
         the ID of the datacenter containing the NIC (required)
 
@@ -28,12 +31,12 @@ knife ionoscloud nic list (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud nic list --datacenter-id DATACENTER_ID --server-id SERVER_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud nic list --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/nic_update.md

@@ -0,0 +1,61 @@
+# NicUpdate
+
+Updates information about a Ionoscloud NIC.
+
+```text
+knife ionoscloud nic update (options)
+```
+
+## Available options:
+
+### Required options:
+
+* datacenter\_id
+* server\_id
+* nic\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    datacenter_id: --datacenter-id DATACENTER_ID, -D DATACENTER_ID
+        iD of the data center (required)
+
+    server_id: --server-id SERVER_ID, -S SERVER_ID
+        the ID of the server to which the NIC is assigned (required)
+
+    nic_id: --nic-id NIC_ID, -N NIC_ID
+        iD of the load balancer (required)
+
+    name: --name NAME, -n NAME
+        name of the NIC
+
+    ips: --ips IP[,IP,...], -i IP[,IP,...]
+        iPs assigned to the NIC
+
+    dhcp: --dhcp DHCP
+        set to false if you wish to disable DHCP
+
+    lan: --lan ID, -l ID
+        the LAN ID the NIC will reside on; if the LAN ID does not exist it will be created
+
+    nat: --nat NAT
+        set to enable NAT on the NIC
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud nic update --extra-config EXTRA_CONFIG_FILE_PATH --datacenter-id DATACENTER_ID --server-id SERVER_ID --nic-id NIC_ID --name NAME --ips IP[,IP,...] --dhcp DHCP --lan ID --nat NAT --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/node_delete.md

@@ -16,6 +16,9 @@ knife ionoscloud node delete NODE_ID [NODE_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -28,8 +31,8 @@ knife ionoscloud node delete NODE_ID [NODE_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example

data/docs/subcommands/node_get.md

@@ -0,0 +1,46 @@
+# NodeGet
+
+Retrieves the attributes of a given K8S Node.
+
+```text
+knife ionoscloud node get (options)
+```
+
+## Available options:
+
+### Required options:
+
+* cluster\_id
+* nodepool\_id
+* node\_id
+* ionoscloud\_username
+* ionoscloud\_password
+
+```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
+    cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
+        the ID of the K8s Cluster (required)
+
+    nodepool_id: --nodepool-id NODEPOOL_ID, -P NODEPOOL_ID
+        the ID of the K8s Nodepool (required)
+
+    node_id: --node-id NODE_ID, -N NODE_ID
+        iD of the load balancer (required)
+
+    ionoscloud_username: --username USERNAME, -u USERNAME
+        your Ionoscloud username (required)
+
+    ionoscloud_password: --password PASSWORD, -p PASSWORD
+        your Ionoscloud password (required)
+
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
+
+```
+## Example
+
+```text
+knife ionoscloud node get --extra-config EXTRA_CONFIG_FILE_PATH --cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --node-id NODE_ID --username USERNAME --password PASSWORD --url URL
+```

data/docs/subcommands/node_list.md

@@ -16,6 +16,9 @@ knife ionoscloud node list
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -28,12 +31,12 @@ knife ionoscloud node list
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example
 
 ```text
-knife ionoscloud node list--cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --username USERNAME --password PASSWORD --extra-config EXTRA_CONFIG_FILE_PATH
+knife ionoscloud node list--extra-config EXTRA_CONFIG_FILE_PATH --cluster-id CLUSTER_ID --nodepool-id NODEPOOL_ID --username USERNAME --password PASSWORD --url URL
 ```

data/docs/subcommands/node_replace.md

@@ -18,6 +18,9 @@ knife ionoscloud node replace NODE_ID [NODE_ID] (options)
 * ionoscloud\_password
 
 ```text
+    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
+        path to the additional config file
+
     cluster_id: --cluster-id CLUSTER_ID, -C CLUSTER_ID
         the ID of the K8s Cluster (required)
 
@@ -30,8 +33,8 @@ knife ionoscloud node replace NODE_ID [NODE_ID] (options)
     ionoscloud_password: --password PASSWORD, -p PASSWORD
         your Ionoscloud password (required)
 
-    extra_config_file: --extra-config EXTRA_CONFIG_FILE_PATH, -e EXTRA_CONFIG_FILE_PATH
-        path to the additional config file
+    ionoscloud_url: --url URL
+        the Ionoscloud API URL
 
 ```
 ## Example