jscop 0.1.2

data/vendor/cache/ruby/2.6.0/gems/rspec-mocks-3.9.1/lib/rspec/mocks.rb

@@ -0,0 +1,130 @@
+require 'rspec/support'
+RSpec::Support.require_rspec_support 'caller_filter'
+RSpec::Support.require_rspec_support 'warnings'
+RSpec::Support.require_rspec_support 'ruby_features'
+
+RSpec::Support.define_optimized_require_for_rspec(:mocks) { |f| require_relative f }
+
+%w[
+  instance_method_stasher
+  method_double
+  argument_matchers
+  example_methods
+  proxy
+  test_double
+  argument_list_matcher
+  message_expectation
+  order_group
+  error_generator
+  space
+  mutate_const
+  targets
+  syntax
+  configuration
+  verifying_double
+  version
+].each { |name| RSpec::Support.require_rspec_mocks name }
+
+# Share the top-level RSpec namespace, because we are a core supported
+# extension.
+module RSpec
+  # Contains top-level utility methods. While this contains a few
+  # public methods, these are not generally meant to be called from
+  # a test or example. They exist primarily for integration with
+  # test frameworks (such as rspec-core).
+  module Mocks
+    # Performs per-test/example setup. This should be called before
+    # an test or example begins.
+    def self.setup
+      @space_stack << (@space = space.new_scope)
+    end
+
+    # Verifies any message expectations that were set during the
+    # test or example. This should be called at the end of an example.
+    def self.verify
+      space.verify_all
+    end
+
+    # Cleans up all test double state (including any methods that were
+    # redefined on partial doubles). This _must_ be called after
+    # each example, even if an error was raised during the example.
+    def self.teardown
+      space.reset_all
+      @space_stack.pop
+      @space = @space_stack.last || @root_space
+    end
+
+    # Adds an allowance (stub) on `subject`
+    #
+    # @param subject the subject to which the message will be added
+    # @param message a symbol, representing the message that will be
+    #                added.
+    # @param opts a hash of options, :expected_from is used to set the
+    #             original call site
+    # @yield an optional implementation for the allowance
+    #
+    # @example Defines the implementation of `foo` on `bar`, using the passed block
+    #   x = 0
+    #   RSpec::Mocks.allow_message(bar, :foo) { x += 1 }
+    def self.allow_message(subject, message, opts={}, &block)
+      space.proxy_for(subject).add_stub(message, opts, &block)
+    end
+
+    # Sets a message expectation on `subject`.
+    # @param subject the subject on which the message will be expected
+    # @param message a symbol, representing the message that will be
+    #                expected.
+    # @param opts a hash of options, :expected_from is used to set the
+    #             original call site
+    # @yield an optional implementation for the expectation
+    #
+    # @example Expect the message `foo` to receive `bar`, then call it
+    #   RSpec::Mocks.expect_message(bar, :foo)
+    #   bar.foo
+    def self.expect_message(subject, message, opts={}, &block)
+      space.proxy_for(subject).add_message_expectation(message, opts, &block)
+    end
+
+    # Call the passed block and verify mocks after it has executed. This allows
+    # mock usage in arbitrary places, such as a `before(:all)` hook.
+    def self.with_temporary_scope
+      setup
+
+      begin
+        yield
+        verify
+      ensure
+        teardown
+      end
+    end
+
+    class << self
+      # @private
+      attr_reader :space
+    end
+    @space_stack = []
+    @root_space  = @space = RSpec::Mocks::RootSpace.new
+
+    # @private
+    IGNORED_BACKTRACE_LINE = 'this backtrace line is ignored'
+
+    # To speed up boot time a bit, delay loading optional or rarely
+    # used features until their first use.
+    autoload :AnyInstance,      "rspec/mocks/any_instance"
+    autoload :ExpectChain,      "rspec/mocks/message_chain"
+    autoload :StubChain,        "rspec/mocks/message_chain"
+    autoload :MarshalExtension, "rspec/mocks/marshal_extension"
+
+    # Namespace for mock-related matchers.
+    module Matchers
+      # @private
+      # just a "tag" for rspec-mock matchers detection
+      module Matcher; end
+
+      autoload :HaveReceived,        "rspec/mocks/matchers/have_received"
+      autoload :Receive,             "rspec/mocks/matchers/receive"
+      autoload :ReceiveMessageChain, "rspec/mocks/matchers/receive_message_chain"
+      autoload :ReceiveMessages,     "rspec/mocks/matchers/receive_messages"
+    end
+  end
+end

data/vendor/cache/ruby/2.6.0/gems/rspec-support-3.9.2/Changelog.md

@@ -0,0 +1,292 @@
+### 3.9.2 / 2019-12-30
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.9.1...v3.9.2)
+
+Bug Fixes:
+
+* Remove unneeded eval. (Matijs van Zuijlen, #394)
+
+### 3.9.1 / 2019-12-28
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.9.0...v3.9.1)
+
+Bug Fixes:
+
+* Remove warning caused by keyword arguments on Ruby 2.7.0.
+  (Jon Rowe, #392)
+
+### 3.9.0 / 2019-10-07
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.3...v3.9.0)
+
+*NO CHANGES*
+
+Version 3.9.0 was released to allow other RSpec gems to release 3.9.0.
+
+### 3.8.3 / 2019-10-02
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.2...v3.8.3)
+
+Bug Fixes:
+
+* Escape \r when outputting strings inside arrays.
+  (Tomita Masahiro, Jon Rowe, #378)
+* Ensure that optional hash arguments are recognised correctly vs keyword
+  arguments. (Evgeni Dzhelyov, #366)
+
+### 3.8.2 / 2019-06-10
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.1...v3.8.2)
+
+Bug Fixes:
+
+* Ensure that an empty hash is recognised as empty keyword arguments when
+  applicable. (Thomas Walpole, #375)
+* Ensure that diffing truthy values produce diffs consistently.
+  (Lucas Nestor, #377)
+
+### 3.8.1 / 2019-03-03
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.0...v3.8.1)
+
+Bug Fixes:
+
+* Ensure that inspecting a `SimpleDelegator` based object works regardless of
+  visibilty of the `__getobj__` method. (Jon Rowe, #369)
+
+### 3.8.0 / 2018-08-04
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.7.1...v3.8.0)
+
+Bug Fixes:
+
+* Order hash keys before diffing to improve diff accuracy when using mocked calls.
+  (James Crisp, #334)
+
+### 3.7.1 / 2018-01-29
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.7.0...v3.7.1)
+
+Bug Fixes:
+
+* Fix source extraction logic so that it does not trigger a `SystemStackError`
+  when processing deeply nested example groups. (Craig Bass, #343)
+
+### 3.7.0 / 2017-10-17
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0...v3.7.0)
+
+Enhancements:
+
+* Improve compatibility with `--enable-frozen-string-literal` option
+  on Ruby 2.3+. (Pat Allan, #320)
+* Add `Support.class_of` for extracting class of any object.
+  (Yuji Nakayama, #325)
+
+Bug Fixes:
+
+* Fix recursive const support to not blow up when given buggy classes
+  that raise odd errors from `#to_str`. (Myron Marston, #317)
+
+### 3.6.0 / 2017-05-04
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0.beta2...3.6.0)
+
+Enhancements:
+
+* Import `Source` classes from rspec-core. (Yuji Nakayama, #315)
+
+### 3.6.0.beta2 / 2016-12-12
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0.beta1...v3.6.0.beta2)
+
+No user-facing changes.
+
+### 3.6.0.beta1 / 2016-10-09
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0...v3.6.0.beta1)
+
+Bug Fixes:
+
+* Prevent truncated formatted object output from mangling console codes. (#294, Anson Kelly)
+
+### 3.5.0 / 2016-07-01
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta4...v3.5.0)
+
+**No user facing changes since beta4**
+
+### 3.5.0.beta4 / 2016-06-05
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta3...v3.5.0.beta4)
+
+Enhancements:
+* Improve `MethodSignature` to better support keyword arguments. (#250, Rob Smith).
+
+### 3.5.0.beta3 / 2016-04-02
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta2...v3.5.0.beta3)
+
+Bug Fixes:
+
+* Fix `EncodedString` to properly handle the behavior of `String#split`
+  on JRuby when the string contains invalid bytes. (Jon Rowe, #268)
+* Fix `ObjectFormatter` so that formatting objects that don't respond to
+  `#inspect` (such as `BasicObject`) does not cause `NoMethodError`.
+  (Yuji Nakayama, #269)
+* Fix `ObjectFormatter` so that formatting recursive array or hash does not
+  cause `SystemStackError`. (Yuji Nakayama, #270, #272)
+
+### 3.5.0.beta2 / 2016-03-10
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta1...v3.5.0.beta2)
+
+No user-facing changes.
+
+### 3.5.0.beta1 / 2016-02-06
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.4.1...v3.5.0.beta1)
+
+Enhancements:
+
+* Improve formatting of objects by allowing truncation to a pre-configured length.
+  (Liam M, #256)
+
+### 3.4.1 / 2015-11-20
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.4.0...v3.4.1)
+
+Bug Fixes:
+
+* Fix `RSpec::Support::RubyFeature.ripper_supported?` so it returns
+  `false` on Rubinius since the Rubinius team has no plans to support
+  it. This prevents rspec-core from trying to load and use ripper to
+  extract failure snippets. (Aaron Stone, #251)
+
+Changes:
+
+* Remove `VersionChecker` in favor of `ComparableVersion`. (Yuji Nakayama, #266)
+
+### 3.4.0 / 2015-11-11
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.3.0...v3.4.0)
+
+Enhancements:
+
+* Improve formatting of `Delegator` based objects (e.g. `SimpleDelgator`) in
+  failure messages and diffs. (Andrew Horner, #215)
+* Add `ComparableVersion`. (Yuji Nakayama, #245)
+* Add `Ripper` support detection. (Yuji Nakayama, #245)
+
+Bug Fixes:
+
+* Work around bug in JRuby that reports that `attr_writer` methods
+  have no parameters, causing RSpec's verifying doubles to wrongly
+  fail when mocking or stubbing a writer method on JRuby. (Myron Marston, #225)
+
+### 3.3.0 / 2015-06-12
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.2...v3.3.0)
+
+Enhancements:
+
+* Improve formatting of arrays and hashes in failure messages so they
+  use our custom formatting of matchers, time objects, etc.
+  (Myron Marston, Nicholas Chmielewski, #205)
+* Use improved formatting for diffs as well. (Nicholas Chmielewski, #205)
+
+Bug Fixes:
+
+* Fix `FuzzyMatcher` so that it checks `expected == actual` rather than
+  `actual == expected`, which avoids errors in situations where the
+  `actual` object's `==` is improperly implemented to assume that only
+  objects of the same type will be given. This allows rspec-mocks'
+  `anything` to match against objects with buggy `==` definitions.
+  (Myron Marston, #193)
+
+### 3.2.2 / 2015-02-23
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.1...v3.2.2)
+
+Bug Fixes:
+
+* Fix an encoding issue with `EncodedString#split` when encountering an
+  invalid byte string. (Benjamin Fleischer, #1760)
+
+### 3.2.1 / 2015-02-04
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.0...v3.2.1)
+
+Bug Fixes:
+
+* Fix `RSpec::CallerFilter` to work on Rubinius 2.2.
+  (Myron Marston, #169)
+
+### 3.2.0 / 2015-02-03
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.2...v3.2.0)
+
+Enhancements:
+
+* Add extra Ruby type detection. (Jon Rowe, #133)
+* Make differ instance re-usable. (Alexey Fedorov, #160)
+
+Bug Fixes:
+
+* Do not consider `[]` and `{}` to match when performing fuzzy matching.
+  (Myron Marston, #157)
+
+### 3.1.2 / 2014-10-08
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.1...v3.1.2)
+
+Bug Fixes:
+
+* Fix method signature to not blow up with a `NoMethodError` on 1.8.7 when
+  verifying against an RSpec matcher. (Myron Marston, #116)
+
+### 3.1.1 / 2014-09-26
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.0...v3.1.1)
+
+Bug Fixes:
+
+* Fix `RSpec::Support::DirectoryMaker` (used by `rspec --init` and
+  `rails generate rspec:install`) so that it detects absolute paths
+   on Windows properly. (Scott Archer, #107, #108, #109) (Jon Rowe, #110)
+
+### 3.1.0 / 2014-09-04
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.4...v3.1.0)
+
+Bug Fixes:
+
+* Fix `FuzzyMatcher` so that it does not wrongly match a struct against
+  an array. (Myron Marston, #97)
+* Prevent infinitely recursing `#flatten` methods from causing the differ
+  to hang. (Jon Rowe, #101)
+
+### 3.0.4 / 2014-08-14
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.3...v3.0.4)
+
+Bug Fixes:
+
+* Fix `FuzzyMatcher` so that it does not silence `ArgumentError` raised
+  from broken implementations of `==`. (Myron Marston, #94)
+
+### 3.0.3 / 2014-07-21
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.2...v3.0.3)
+
+Bug Fixes:
+
+* Fix regression in `Support#method_handle_for` where proxy objects
+  with method delegated would wrongly not return a method handle.
+  (Jon Rowe, #90)
+* Properly detect Module#prepend support in Ruby 2.1+ (Ben Langfeld, #91)
+* Fix `rspec/support/warnings.rb` so it can be loaded and used in
+  isolation. (Myron Marston, #93)
+
+### 3.0.2 / 2014-06-20
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.1...v3.0.2)
+
+* Revert `BlockSignature` change from 3.0.1 because of a ruby bug that
+  caused it to change the block's behavior (https://bugs.ruby-lang.org/issues/9967).
+  (Myron Marston, rspec-mocks#721)
+
+### 3.0.1 / 2014-06-19
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0...v3.0.1)
+
+* Fix `BlockSignature` so that it correctly differentiates between
+  required and optional block args. (Myron Marston, rspec-mocks#714)
+
+### 3.0.0 / 2014-06-01
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.rc1...v3.0.0)
+
+### 3.0.0.rc1 / 2014-05-18
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.beta2...v3.0.0.rc1)
+
+### 3.0.0.beta2 / 2014-02-17
+[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.beta1...v3.0.0.beta2)
+
+Bug Fixes:
+
+* Issue message when :replacement is passed to `RSpec.warn_with`. (Jon Rowe)
+
+### 3.0.0.beta1 / 2013-11-07
+[Full Changelog](https://github.com/rspec/rspec-support/compare/0dc12d1bdbbacc757a9989f8c09cd08ef3a4837e...v3.0.0.beta1)
+
+Initial release.

data/vendor/cache/ruby/2.6.0/gems/rspec-support-3.9.2/LICENSE.md

@@ -0,0 +1,23 @@
+The MIT License (MIT)
+====================
+
+* Copyright © 2013 David Chelimsky, Myron Marston, Jon Rowe, Sam Phippen, Xavier Shay, Bradley Schaefer
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/cache/ruby/2.6.0/gems/rspec-support-3.9.2/README.md

@@ -0,0 +1,40 @@
+# RSpec::Support
+
+`RSpec::Support` provides common functionality to `RSpec::Core`,
+`RSpec::Expectations` and `RSpec::Mocks`. It is considered
+suitable for internal use only at this time.
+
+## Installation / Usage
+
+Install one or more of the `RSpec` gems.
+
+Want to run against the `master` branch? You'll need to include the dependent
+RSpec repos as well. Add the following to your `Gemfile`:
+
+```ruby
+%w[rspec-core rspec-expectations rspec-mocks rspec-support].each do |lib|
+  gem lib, :git => "https://github.com/rspec/#{lib}.git", :branch => 'master'
+end
+```
+
+## Contributing
+
+Once you've set up the environment, you'll need to cd into the working
+directory of whichever repo you want to work in. From there you can run the
+specs and cucumber features, and make patches.
+
+NOTE: You do not need to use rspec-dev to work on a specific RSpec repo. You
+can treat each RSpec repo as an independent project.
+
+- [Build details](BUILD_DETAIL.md)
+- [Code of Conduct](CODE_OF_CONDUCT.md)
+- [Detailed contributing guide](CONTRIBUTING.md)
+- [Development setup guide](DEVELOPMENT.md)
+
+## Patches
+
+Please submit a pull request or a github issue. If you submit an issue, please
+include a link to either of:
+
+* a gist (or equivalent) of the patch
+* a branch or commit in your github fork of the repo

data/vendor/cache/ruby/2.6.0/gems/rspec-support-3.9.2/lib/rspec/support/caller_filter.rb

@@ -0,0 +1,83 @@
+RSpec::Support.require_rspec_support "ruby_features"
+
+module RSpec
+  # Consistent implementation for "cleaning" the caller method to strip out
+  # non-rspec lines. This enables errors to be reported at the call site in
+  # the code using the library, which is far more useful than the particular
+  # internal method that raised an error.
+  class CallerFilter
+    RSPEC_LIBS = %w[
+      core
+      mocks
+      expectations
+      support
+      matchers
+      rails
+    ]
+
+    ADDITIONAL_TOP_LEVEL_FILES = %w[ autorun ]
+
+    LIB_REGEX = %r{/lib/rspec/(#{(RSPEC_LIBS + ADDITIONAL_TOP_LEVEL_FILES).join('|')})(\.rb|/)}
+
+    # rubygems/core_ext/kernel_require.rb isn't actually part of rspec (obviously) but we want
+    # it ignored when we are looking for the first meaningful line of the backtrace outside
+    # of RSpec. It can show up in the backtrace as the immediate first caller
+    # when `CallerFilter.first_non_rspec_line` is called from the top level of a required
+    # file, but it depends on if rubygems is loaded or not. We don't want to have to deal
+    # with this complexity in our `RSpec.deprecate` calls, so we ignore it here.
+    IGNORE_REGEX = Regexp.union(LIB_REGEX, "rubygems/core_ext/kernel_require.rb")
+
+    if RSpec::Support::RubyFeatures.caller_locations_supported?
+      # This supports args because it's more efficient when the caller specifies
+      # these. It allows us to skip frames the caller knows are part of RSpec,
+      # and to decrease the increment size if the caller is confident the line will
+      # be found in a small number of stack frames from `skip_frames`.
+      #
+      # Note that there is a risk to passing a `skip_frames` value that is too high:
+      # If it skippped the first non-rspec line, then this method would return the
+      # 2nd or 3rd (or whatever) non-rspec line. Thus, you generally shouldn't pass
+      # values for these parameters, particularly since most places that use this are
+      # not hot spots (generally it gets used for deprecation warnings). However,
+      # if you do have a hot spot that calls this, passing `skip_frames` can make
+      # a significant difference. Just make sure that that particular use is tested
+      # so that if the provided `skip_frames` changes to no longer be accurate in
+      # such a way that would return the wrong stack frame, a test will fail to tell you.
+      #
+      # See benchmarks/skip_frames_for_caller_filter.rb for measurements.
+      def self.first_non_rspec_line(skip_frames=3, increment=5)
+        # Why a default `skip_frames` of 3?
+        # By the time `caller_locations` is called below, the first 3 frames are:
+        #   lib/rspec/support/caller_filter.rb:63:in `block in first_non_rspec_line'
+        #   lib/rspec/support/caller_filter.rb:62:in `loop'
+        #   lib/rspec/support/caller_filter.rb:62:in `first_non_rspec_line'
+
+        # `caller` is an expensive method that scales linearly with the size of
+        # the stack. The performance hit for fetching it in chunks is small,
+        # and since the target line is probably near the top of the stack, the
+        # overall improvement of a chunked search like this is significant.
+        #
+        # See benchmarks/caller.rb for measurements.
+
+        # The default increment of 5 for this method are mostly arbitrary, but
+        # is chosen to give good performance on the common case of creating a double.
+
+        loop do
+          stack = caller_locations(skip_frames, increment)
+          raise "No non-lib lines in stack" unless stack
+
+          line = stack.find { |l| l.path !~ IGNORE_REGEX }
+          return line.to_s if line
+
+          skip_frames += increment
+          increment   *= 2 # The choice of two here is arbitrary.
+        end
+      end
+    else
+      # Earlier rubies do not support the two argument form of `caller`. This
+      # fallback is logically the same, but slower.
+      def self.first_non_rspec_line(*)
+        caller.find { |line| line !~ IGNORE_REGEX }
+      end
+    end
+  end
+end

data/vendor/cache/ruby/2.6.0/gems/rspec-support-3.9.2/lib/rspec/support/comparable_version.rb

@@ -0,0 +1,46 @@
+module RSpec
+  module Support
+    # @private
+    class ComparableVersion
+      include Comparable
+
+      attr_reader :string
+
+      def initialize(string)
+        @string = string
+      end
+
+      def <=>(other)
+        other = self.class.new(other) unless other.is_a?(self.class)
+
+        return 0 if string == other.string
+
+        longer_segment_count = [self, other].map { |version| version.segments.count }.max
+
+        longer_segment_count.times do |index|
+          self_segment = segments[index] || 0
+          other_segment = other.segments[index] || 0
+
+          if self_segment.class == other_segment.class
+            result = self_segment <=> other_segment
+            return result unless result == 0
+          else
+            return self_segment.is_a?(String) ? -1 : 1
+          end
+        end
+
+        0
+      end
+
+      def segments
+        @segments ||= string.scan(/[a-z]+|\d+/i).map do |segment|
+          if segment =~ /\A\d+\z/
+            segment.to_i
+          else
+            segment
+          end
+        end
+      end
+    end
+  end
+end