jruby-openssl 0.11.0.cr1-java → 0.12.2-java

data/lib/jopenssl22/openssl/x509.rb

@@ -1,139 +0,0 @@
-#--
-#
-# $RCSfile$
-#
-# = Ruby-space definitions that completes C-space funcs for X509 and subclasses
-#
-# = Info
-# 'OpenSSL for Ruby 2' project
-# Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
-# All rights reserved.
-#
-# = Licence
-# This program is licenced under the same licence as Ruby.
-# (See the file 'LICENCE'.)
-#
-# = Version
-# $Id$
-#
-#++
-
-module OpenSSL
-  module X509
-    class Name
-      module RFC2253DN
-        Special = ',=+<>#;'
-        HexChar = /[0-9a-fA-F]/
-        HexPair = /#{HexChar}#{HexChar}/
-        HexString = /#{HexPair}+/
-        Pair = /\\(?:[#{Special}]|\\|"|#{HexPair})/
-        StringChar = /[^\\"#{Special}]/
-        QuoteChar = /[^\\"]/
-        AttributeType = /[a-zA-Z][0-9a-zA-Z]*|[0-9]+(?:\.[0-9]+)*/
-        AttributeValue = /
-          (?!["#])((?:#{StringChar}|#{Pair})*)|
-          \#(#{HexString})|
-          "((?:#{QuoteChar}|#{Pair})*)"
-        /x
-        TypeAndValue = /\A(#{AttributeType})=#{AttributeValue}/
-
-        module_function
-
-        def expand_pair(str)
-          return nil unless str
-          return str.gsub(Pair){
-            pair = $&
-            case pair.size
-            when 2 then pair[1,1]
-            when 3 then Integer("0x#{pair[1,2]}").chr
-            else raise OpenSSL::X509::NameError, "invalid pair: #{str}"
-            end
-          }
-        end
-
-        def expand_hexstring(str)
-          return nil unless str
-          der = str.gsub(HexPair){$&.to_i(16).chr }
-          a1 = OpenSSL::ASN1.decode(der)
-          return a1.value, a1.tag
-        end
-
-        def expand_value(str1, str2, str3)
-          value = expand_pair(str1)
-          value, tag = expand_hexstring(str2) unless value
-          value = expand_pair(str3) unless value
-          return value, tag
-        end
-
-        def scan(dn)
-          str = dn
-          ary = []
-          while true
-            if md = TypeAndValue.match(str)
-              remain = md.post_match
-              type = md[1]
-              value, tag = expand_value(md[2], md[3], md[4]) rescue nil
-              if value
-                type_and_value = [type, value]
-                type_and_value.push(tag) if tag
-                ary.unshift(type_and_value)
-                if remain.length > 2 && remain[0] == ?,
-                  str = remain[1..-1]
-                  next
-                elsif remain.length > 2 && remain[0] == ?+
-                  raise OpenSSL::X509::NameError,
-                    "multi-valued RDN is not supported: #{dn}"
-                elsif remain.empty?
-                  break
-                end
-              end
-            end
-            msg_dn = dn[0, dn.length - str.length] + " =>" + str
-            raise OpenSSL::X509::NameError, "malformed RDN: #{msg_dn}"
-          end
-          return ary
-        end
-      end
-
-      class << self
-        def parse_rfc2253(str, template=OBJECT_TYPE_TEMPLATE)
-          ary = OpenSSL::X509::Name::RFC2253DN.scan(str)
-          self.new(ary, template)
-        end
-
-        def parse_openssl(str, template=OBJECT_TYPE_TEMPLATE)
-          ary = str.scan(/\s*([^\/,]+)\s*/).collect{|i| i[0].split("=", 2) }
-          self.new(ary, template)
-        end
-
-        alias parse parse_openssl
-      end
-
-      def pretty_print(q)
-        q.object_group(self) {
-          q.text ' '
-          q.text to_s(OpenSSL::X509::Name::RFC2253)
-        }
-      end
-    end
-
-    class StoreContext
-      def cleanup
-        warn "(#{caller.first}) OpenSSL::X509::StoreContext#cleanup is deprecated with no replacement" if $VERBOSE
-      end
-    end
-
-    class Certificate
-      def pretty_print(q)
-        q.object_group(self) {
-          q.breakable
-          q.text 'subject='; q.pp self.subject; q.text ','; q.breakable
-          q.text 'issuer='; q.pp self.issuer; q.text ','; q.breakable
-          q.text 'serial='; q.pp self.serial; q.text ','; q.breakable
-          q.text 'not_before='; q.pp self.not_before; q.text ','; q.breakable
-          q.text 'not_after='; q.pp self.not_after
-        }
-      end
-    end
-  end
-end

data/lib/jopenssl22/openssl.rb

@@ -1,22 +0,0 @@
-=begin
-= $RCSfile$ -- Loader for all OpenSSL C-space and Ruby-space definitions
-
-= Info
-  'OpenSSL for Ruby 2' project
-  Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
-  All rights reserved.
-
-= Licence
-  This program is licenced under the same licence as Ruby.
-  (See the file 'LICENCE'.)
-
-= Version
-  $Id$
-=end
-
-require 'openssl/bn'
-require 'openssl/cipher'
-require 'openssl/config'
-require 'openssl/digest'
-require 'openssl/x509'
-require 'openssl/ssl'

data/lib/jopenssl23/openssl/bn.rb

@@ -1,38 +0,0 @@
-# frozen_string_literal: false
-#--
-#
-# = Ruby-space definitions that completes C-space funcs for BN
-#
-# = Info
-# 'OpenSSL for Ruby 2' project
-# Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
-# All rights reserved.
-#
-# = Licence
-# This program is licensed under the same licence as Ruby.
-# (See the file 'LICENCE'.)
-#++
-
-module OpenSSL
-  class BN
-    def pretty_print(q)
-      q.object_group(self) {
-        q.text ' '
-        q.text to_i.to_s
-      }
-    end
-  end # BN
-end # OpenSSL
-
-##
-#--
-# Add double dispatch to Integer
-#++
-class Integer
-  # Casts an Integer as an OpenSSL::BN
-  #
-  # See `man bn` for more info.
-  def to_bn
-    OpenSSL::BN::new(self)
-  end
-end # Integer

data/lib/jopenssl23/openssl/buffering.rb

@@ -1,455 +0,0 @@
-# coding: binary
-# frozen_string_literal: false
-#--
-#= Info
-#  'OpenSSL for Ruby 2' project
-#  Copyright (C) 2001 GOTOU YUUZOU <gotoyuzo@notwork.org>
-#  All rights reserved.
-#
-#= Licence
-#  This program is licensed under the same licence as Ruby.
-#  (See the file 'LICENCE'.)
-#++
-
-##
-# OpenSSL IO buffering mix-in module.
-#
-# This module allows an OpenSSL::SSL::SSLSocket to behave like an IO.
-#
-# You typically won't use this module directly, you can see it implemented in
-# OpenSSL::SSL::SSLSocket.
-
-module OpenSSL::Buffering
-  include Enumerable
-
-  ##
-  # The "sync mode" of the SSLSocket.
-  #
-  # See IO#sync for full details.
-
-  attr_accessor :sync
-
-  ##
-  # Default size to read from or write to the SSLSocket for buffer operations.
-
-  BLOCK_SIZE = 1024*16
-
-  ##
-  # Creates an instance of OpenSSL's buffering IO module.
-
-  def initialize(*)
-    # super
-    @eof = false
-    @rbuffer = ""
-    @sync = @io.sync
-  end
-
-  #
-  # for reading.
-  #
-  private
-
-  ##
-  # Fills the buffer from the underlying SSLSocket
-
-  def fill_rbuff
-    begin
-      @rbuffer << self.sysread(BLOCK_SIZE)
-    rescue Errno::EAGAIN
-      retry
-    rescue EOFError
-      @eof = true
-    end
-  end
-
-  ##
-  # Consumes _size_ bytes from the buffer
-
-  def consume_rbuff(size=nil)
-    if @rbuffer.empty?
-      nil
-    else
-      size = @rbuffer.size unless size
-      ret = @rbuffer[0, size]
-      @rbuffer[0, size] = ""
-      ret
-    end
-  end
-
-  public
-
-  ##
-  # Reads _size_ bytes from the stream.  If _buf_ is provided it must
-  # reference a string which will receive the data.
-  #
-  # See IO#read for full details.
-
-  def read(size=nil, buf=nil)
-    if size == 0
-      if buf
-        buf.clear
-        return buf
-      else
-        return ""
-      end
-    end
-    until @eof
-      break if size && size <= @rbuffer.size
-      fill_rbuff
-    end
-    ret = consume_rbuff(size) || ""
-    if buf
-      buf.replace(ret)
-      ret = buf
-    end
-    (size && ret.empty?) ? nil : ret
-  end
-
-  ##
-  # Reads at most _maxlen_ bytes from the stream.  If _buf_ is provided it
-  # must reference a string which will receive the data.
-  #
-  # See IO#readpartial for full details.
-
-  def readpartial(maxlen, buf=nil)
-    if maxlen == 0
-      if buf
-        buf.clear
-        return buf
-      else
-        return ""
-      end
-    end
-    if @rbuffer.empty?
-      begin
-        return sysread(maxlen, buf)
-      rescue Errno::EAGAIN
-        retry
-      end
-    end
-    ret = consume_rbuff(maxlen)
-    if buf
-      buf.replace(ret)
-      ret = buf
-    end
-    ret
-  end
-
-  ##
-  # Reads at most _maxlen_ bytes in the non-blocking manner.
-  #
-  # When no data can be read without blocking it raises
-  # OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
-  #
-  # IO::WaitReadable means SSL needs to read internally so read_nonblock
-  # should be called again when the underlying IO is readable.
-  #
-  # IO::WaitWritable means SSL needs to write internally so read_nonblock
-  # should be called again after the underlying IO is writable.
-  #
-  # OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:
-  #
-  #   # emulates blocking read (readpartial).
-  #   begin
-  #     result = ssl.read_nonblock(maxlen)
-  #   rescue IO::WaitReadable
-  #     IO.select([io])
-  #     retry
-  #   rescue IO::WaitWritable
-  #     IO.select(nil, [io])
-  #     retry
-  #   end
-  #
-  # Note that one reason that read_nonblock writes to the underlying IO is
-  # when the peer requests a new TLS/SSL handshake.  See openssl the FAQ for
-  # more details.  http://www.openssl.org/support/faq.html
-  #
-  # By specifying a keyword argument _exception_ to +false+, you can indicate
-  # that read_nonblock should not raise an IO::Wait*able exception, but
-  # return the symbol +:wait_writable+ or +:wait_readable+ instead. At EOF,
-  # it will return +nil+ instead of raising EOFError.
-
-  def read_nonblock(maxlen, buf=nil, exception: true)
-    if maxlen == 0
-      if buf
-        buf.clear
-        return buf
-      else
-        return ""
-      end
-    end
-    if @rbuffer.empty?
-      return sysread_nonblock(maxlen, buf, exception: exception)
-    end
-    ret = consume_rbuff(maxlen)
-    if buf
-      buf.replace(ret)
-      ret = buf
-    end
-    ret
-  end
-
-  ##
-  # Reads the next "line" from the stream.  Lines are separated by _eol_.  If
-  # _limit_ is provided the result will not be longer than the given number of
-  # bytes.
-  #
-  # _eol_ may be a String or Regexp.
-  #
-  # Unlike IO#gets the line read will not be assigned to +$_+.
-  #
-  # Unlike IO#gets the separator must be provided if a limit is provided.
-
-  def gets(eol=$/, limit=nil)
-    idx = @rbuffer.index(eol)
-    until @eof
-      break if idx
-      fill_rbuff
-      idx = @rbuffer.index(eol)
-    end
-    if eol.is_a?(Regexp)
-      size = idx ? idx+$&.size : nil
-    else
-      size = idx ? idx+eol.size : nil
-    end
-    if size && limit && limit >= 0
-      size = [size, limit].min
-    end
-    consume_rbuff(size)
-  end
-
-  ##
-  # Executes the block for every line in the stream where lines are separated
-  # by _eol_.
-  #
-  # See also #gets
-
-  def each(eol=$/)
-    while line = self.gets(eol)
-      yield line
-    end
-  end
-  alias each_line each
-
-  ##
-  # Reads lines from the stream which are separated by _eol_.
-  #
-  # See also #gets
-
-  def readlines(eol=$/)
-    ary = []
-    while line = self.gets(eol)
-      ary << line
-    end
-    ary
-  end
-
-  ##
-  # Reads a line from the stream which is separated by _eol_.
-  #
-  # Raises EOFError if at end of file.
-
-  def readline(eol=$/)
-    raise EOFError if eof?
-    gets(eol)
-  end
-
-  ##
-  # Reads one character from the stream.  Returns nil if called at end of
-  # file.
-
-  def getc
-    read(1)
-  end
-
-  ##
-  # Calls the given block once for each byte in the stream.
-
-  def each_byte # :yields: byte
-    while c = getc
-      yield(c.ord)
-    end
-  end
-
-  ##
-  # Reads a one-character string from the stream.  Raises an EOFError at end
-  # of file.
-
-  def readchar
-    raise EOFError if eof?
-    getc
-  end
-
-  ##
-  # Pushes character _c_ back onto the stream such that a subsequent buffered
-  # character read will return it.
-  #
-  # Unlike IO#getc multiple bytes may be pushed back onto the stream.
-  #
-  # Has no effect on unbuffered reads (such as #sysread).
-
-  def ungetc(c)
-    @rbuffer[0,0] = c.chr
-  end
-
-  ##
-  # Returns true if the stream is at file which means there is no more data to
-  # be read.
-
-  def eof?
-    fill_rbuff if !@eof && @rbuffer.empty?
-    @eof && @rbuffer.empty?
-  end
-  alias eof eof?
-
-  #
-  # for writing.
-  #
-  private
-
-  ##
-  # Writes _s_ to the buffer.  When the buffer is full or #sync is true the
-  # buffer is flushed to the underlying socket.
-
-  def do_write(s)
-    @wbuffer = "" unless defined? @wbuffer
-    @wbuffer << s
-    @wbuffer.force_encoding(Encoding::BINARY)
-    @sync ||= false
-    if @sync or @wbuffer.size > BLOCK_SIZE
-      until @wbuffer.empty?
-        begin
-          nwrote = syswrite(@wbuffer)
-        rescue Errno::EAGAIN
-          retry
-        end
-        @wbuffer[0, nwrote] = ""
-      end
-    end
-  end
-
-  public
-
-  ##
-  # Writes _s_ to the stream.  If the argument is not a String it will be
-  # converted using +.to_s+ method.  Returns the number of bytes written.
-
-  def write(*s)
-    s.inject(0) do |written, str|
-      do_write(str)
-      written + str.bytesize
-    end
-  end
-
-  ##
-  # Writes _s_ in the non-blocking manner.
-  #
-  # If there is buffered data, it is flushed first.  This may block.
-  #
-  # write_nonblock returns number of bytes written to the SSL connection.
-  #
-  # When no data can be written without blocking it raises
-  # OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
-  #
-  # IO::WaitReadable means SSL needs to read internally so write_nonblock
-  # should be called again after the underlying IO is readable.
-  #
-  # IO::WaitWritable means SSL needs to write internally so write_nonblock
-  # should be called again after underlying IO is writable.
-  #
-  # So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
-  #
-  #   # emulates blocking write.
-  #   begin
-  #     result = ssl.write_nonblock(str)
-  #   rescue IO::WaitReadable
-  #     IO.select([io])
-  #     retry
-  #   rescue IO::WaitWritable
-  #     IO.select(nil, [io])
-  #     retry
-  #   end
-  #
-  # Note that one reason that write_nonblock reads from the underlying IO
-  # is when the peer requests a new TLS/SSL handshake.  See the openssl FAQ
-  # for more details.  http://www.openssl.org/support/faq.html
-  #
-  # By specifying a keyword argument _exception_ to +false+, you can indicate
-  # that write_nonblock should not raise an IO::Wait*able exception, but
-  # return the symbol +:wait_writable+ or +:wait_readable+ instead.
-
-  def write_nonblock(s, exception: true)
-    flush
-    syswrite_nonblock(s, exception: exception)
-  end
-
-  ##
-  # Writes _s_ to the stream.  _s_ will be converted to a String using
-  # +.to_s+ method.
-
-  def <<(s)
-    do_write(s)
-    self
-  end
-
-  ##
-  # Writes _args_ to the stream along with a record separator.
-  #
-  # See IO#puts for full details.
-
-  def puts(*args)
-    s = ""
-    if args.empty?
-      s << "\n"
-    end
-    args.each{|arg|
-      s << arg.to_s
-      s.sub!(/(?<!\n)\z/, "\n")
-    }
-    do_write(s)
-    nil
-  end
-
-  ##
-  # Writes _args_ to the stream.
-  #
-  # See IO#print for full details.
-
-  def print(*args)
-    s = ""
-    args.each{ |arg| s << arg.to_s }
-    do_write(s)
-    nil
-  end
-
-  ##
-  # Formats and writes to the stream converting parameters under control of
-  # the format string.
-  #
-  # See Kernel#sprintf for format string details.
-
-  def printf(s, *args)
-    do_write(s % args)
-    nil
-  end
-
-  ##
-  # Flushes buffered data to the SSLSocket.
-
-  def flush
-    osync = @sync
-    @sync = true
-    do_write ""
-    return self
-  ensure
-    @sync = osync
-  end
-
-  ##
-  # Closes the SSLSocket and flushes any unwritten data.
-
-  def close
-    flush rescue nil
-    sysclose
-  end
-end

data/lib/jopenssl23/openssl/cipher.rb

@@ -1,25 +0,0 @@
-# frozen_string_literal: false
-#--
-# = Ruby-space predefined Cipher subclasses
-#
-# = Info
-# 'OpenSSL for Ruby 2' project
-# Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
-# All rights reserved.
-#
-# = Licence
-# This program is licensed under the same licence as Ruby.
-# (See the file 'LICENCE'.)
-#++
-
-module OpenSSL
-  class Cipher
-
-    # Deprecated.
-    #
-    # This class is only provided for backwards compatibility.
-    # Use OpenSSL::Cipher.
-    class Cipher < Cipher; end
-    deprecate_constant :Cipher
-  end # Cipher
-end # OpenSSL