johnson 1.1.0

data/vendor/spidermonkey/fdlibm/fdlibm.h

@@ -0,0 +1,273 @@
+/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
+ *
+ * ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla Communicator client code, released
+ * March 31, 1998.
+ *
+ * The Initial Developer of the Original Code is
+ * Sun Microsystems, Inc.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either of the GNU General Public License Version 2 or later (the "GPL"),
+ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/* @(#)fdlibm.h 1.5 95/01/18 */
+/*
+ * ====================================================
+ * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
+ *
+ * Developed at SunSoft, a Sun Microsystems, Inc. business.
+ * Permission to use, copy, modify, and distribute this
+ * software is freely granted, provided that this notice 
+ * is preserved.
+ * ====================================================
+ */
+
+/* Modified defines start here.. */
+#undef __LITTLE_ENDIAN
+
+#ifdef _WIN32
+#define huge myhuge
+#define __LITTLE_ENDIAN
+#endif
+
+#ifdef XP_OS2
+#define __LITTLE_ENDIAN
+#endif
+
+#if defined(linux) && (defined(__i386__) || defined(__x86_64__) || defined(__ia64) || (defined(__mips) && defined(__MIPSEL__)))
+#define __LITTLE_ENDIAN
+#endif
+
+/* End here. The rest is the standard file. */
+
+#ifdef SOLARIS	/* special setup for Sun test regime */
+#if defined(i386) || defined(i486) || \
+	defined(intel) || defined(x86) || defined(i86pc)
+#define __LITTLE_ENDIAN
+#endif
+#endif
+
+typedef union {
+#ifdef __LITTLE_ENDIAN
+    struct { int lo, hi; } ints;
+#else
+    struct { int hi, lo; } ints;
+#endif
+    double d;
+} fd_twoints;
+
+#define __HI(x) x.ints.hi
+#define __LO(x) x.ints.lo
+
+#undef __P
+#ifdef __STDC__
+#define	__P(p)	p
+#else
+#define	__P(p)	()
+#endif
+
+/*
+ * ANSI/POSIX
+ */
+
+extern int signgam;
+
+#define	MAXFLOAT	((float)3.40282346638528860e+38)
+
+enum fdversion {fdlibm_ieee = -1, fdlibm_svid, fdlibm_xopen, fdlibm_posix};
+
+#define _LIB_VERSION_TYPE enum fdversion
+#define _LIB_VERSION _fdlib_version  
+
+/* if global variable _LIB_VERSION is not desirable, one may 
+ * change the following to be a constant by: 
+ *	#define _LIB_VERSION_TYPE const enum version
+ * In that case, after one initializes the value _LIB_VERSION (see
+ * s_lib_version.c) during compile time, it cannot be modified
+ * in the middle of a program
+ */ 
+extern  _LIB_VERSION_TYPE  _LIB_VERSION;
+
+#define _IEEE_  fdlibm_ieee
+#define _SVID_  fdlibm_svid
+#define _XOPEN_ fdlibm_xopen
+#define _POSIX_ fdlibm_posix
+
+struct exception {
+	int type;
+	char *name;
+	double arg1;
+	double arg2;
+	double retval;
+};
+
+#define	HUGE		MAXFLOAT
+
+/* 
+ * set X_TLOSS = pi*2**52, which is possibly defined in <values.h>
+ * (one may replace the following line by "#include <values.h>")
+ */
+
+#define X_TLOSS		1.41484755040568800000e+16 
+
+#define	DOMAIN		1
+#define	SING		2
+#define	OVERFLOW	3
+#define	UNDERFLOW	4
+#define	TLOSS		5
+#define	PLOSS		6
+
+/*
+ * ANSI/POSIX
+ */
+
+extern double fd_acos __P((double));
+extern double fd_asin __P((double));
+extern double fd_atan __P((double));
+extern double fd_atan2 __P((double, double));
+extern double fd_cos __P((double));
+extern double fd_sin __P((double));
+extern double fd_tan __P((double));
+ 
+extern double fd_cosh __P((double));
+extern double fd_sinh __P((double));
+extern double fd_tanh __P((double));
+
+extern double fd_exp __P((double));
+extern double fd_frexp __P((double, int *));
+extern double fd_ldexp __P((double, int));
+extern double fd_log __P((double));
+extern double fd_log10 __P((double));
+extern double fd_modf __P((double, double *));
+
+extern double fd_pow __P((double, double));
+extern double fd_sqrt __P((double));
+
+extern double fd_ceil __P((double));
+extern double fd_fabs __P((double));
+extern double fd_floor __P((double));
+extern double fd_fmod __P((double, double));
+
+extern double fd_erf __P((double));
+extern double fd_erfc __P((double));
+extern double fd_gamma __P((double));
+extern double fd_hypot __P((double, double));
+extern int fd_isnan __P((double));
+extern int fd_finite __P((double));
+extern double fd_j0 __P((double));
+extern double fd_j1 __P((double));
+extern double fd_jn __P((int, double));
+extern double fd_lgamma __P((double));
+extern double fd_y0 __P((double));
+extern double fd_y1 __P((double));
+extern double fd_yn __P((int, double));
+
+extern double fd_acosh __P((double));
+extern double fd_asinh __P((double));
+extern double fd_atanh __P((double));
+extern double fd_cbrt __P((double));
+extern double fd_logb __P((double));
+extern double fd_nextafter __P((double, double));
+extern double fd_remainder __P((double, double));
+#ifdef _SCALB_INT
+extern double fd_scalb __P((double, int));
+#else
+extern double fd_scalb __P((double, double));
+#endif
+
+extern int fd_matherr __P((struct exception *));
+
+/*
+ * IEEE Test Vector
+ */
+extern double significand __P((double));
+
+/*
+ * Functions callable from C, intended to support IEEE arithmetic.
+ */
+extern double fd_copysign __P((double, double));
+extern int fd_ilogb __P((double));
+extern double fd_rint __P((double));
+extern double fd_scalbn __P((double, int));
+
+/*
+ * BSD math library entry points
+ */
+extern double fd_expm1 __P((double));
+extern double fd_log1p __P((double));
+
+/*
+ * Reentrant version of gamma & lgamma; passes signgam back by reference
+ * as the second argument; user must allocate space for signgam.
+ */
+#ifdef _REENTRANT
+extern double gamma_r __P((double, int *));
+extern double lgamma_r __P((double, int *));
+#endif	/* _REENTRANT */
+
+/* ieee style elementary functions */
+extern double __ieee754_sqrt __P((double));			
+extern double __ieee754_acos __P((double));			
+extern double __ieee754_acosh __P((double));			
+extern double __ieee754_log __P((double));			
+extern double __ieee754_atanh __P((double));			
+extern double __ieee754_asin __P((double));			
+extern double __ieee754_atan2 __P((double,double));			
+extern double __ieee754_exp __P((double));
+extern double __ieee754_cosh __P((double));
+extern double __ieee754_fmod __P((double,double));
+extern double __ieee754_pow __P((double,double));
+extern double __ieee754_lgamma_r __P((double,int *));
+extern double __ieee754_gamma_r __P((double,int *));
+extern double __ieee754_lgamma __P((double));
+extern double __ieee754_gamma __P((double));
+extern double __ieee754_log10 __P((double));
+extern double __ieee754_sinh __P((double));
+extern double __ieee754_hypot __P((double,double));
+extern double __ieee754_j0 __P((double));
+extern double __ieee754_j1 __P((double));
+extern double __ieee754_y0 __P((double));
+extern double __ieee754_y1 __P((double));
+extern double __ieee754_jn __P((int,double));
+extern double __ieee754_yn __P((int,double));
+extern double __ieee754_remainder __P((double,double));
+extern int    __ieee754_rem_pio2 __P((double,double*));
+#ifdef _SCALB_INT
+extern double __ieee754_scalb __P((double,int));
+#else
+extern double __ieee754_scalb __P((double,double));
+#endif
+
+/* fdlibm kernel function */
+extern double __kernel_standard __P((double,double,int,int*));
+extern double __kernel_sin __P((double,double,int));
+extern double __kernel_cos __P((double,double));
+extern double __kernel_tan __P((double,double,int));
+extern int    __kernel_rem_pio2 __P((double*,double*,int,int,int,const int*));

data/vendor/spidermonkey/fdlibm/fdlibm.mak

@@ -0,0 +1,1453 @@
+# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+!IF "$(CFG)" == ""
+CFG=fdlibm - Win32 Debug
+!MESSAGE No configuration specified.  Defaulting to fdlibm - Win32 Debug.
+!ENDIF 
+
+!IF "$(CFG)" != "fdlibm - Win32 Release" && "$(CFG)" != "fdlibm - Win32 Debug"
+!MESSAGE Invalid configuration "$(CFG)" specified.
+!MESSAGE You can specify a configuration when running NMAKE on this makefile
+!MESSAGE by defining the macro CFG on the command line.  For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "fdlibm.mak" CFG="fdlibm - Win32 Debug"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "fdlibm - Win32 Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "fdlibm - Win32 Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE 
+!ERROR An invalid configuration is specified.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+################################################################################
+# Begin Project
+CPP=cl.exe
+
+!IF  "$(CFG)" == "fdlibm - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "fdlibm__"
+# PROP BASE Intermediate_Dir "fdlibm__"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "fdlibm__"
+# PROP Intermediate_Dir "fdlibm__"
+# PROP Target_Dir ""
+OUTDIR=.\fdlibm__
+INTDIR=.\fdlibm__
+
+ALL : "$(OUTDIR)\fdlibm.lib"
+
+CLEAN : 
+	-@erase "$(INTDIR)\e_acos.obj"
+	-@erase "$(INTDIR)\e_acosh.obj"
+	-@erase "$(INTDIR)\e_asin.obj"
+	-@erase "$(INTDIR)\e_atan2.obj"
+	-@erase "$(INTDIR)\e_atanh.obj"
+	-@erase "$(INTDIR)\e_cosh.obj"
+	-@erase "$(INTDIR)\e_exp.obj"
+	-@erase "$(INTDIR)\e_fmod.obj"
+	-@erase "$(INTDIR)\e_gamma.obj"
+	-@erase "$(INTDIR)\e_gamma_r.obj"
+	-@erase "$(INTDIR)\e_hypot.obj"
+	-@erase "$(INTDIR)\e_j0.obj"
+	-@erase "$(INTDIR)\e_j1.obj"
+	-@erase "$(INTDIR)\e_jn.obj"
+	-@erase "$(INTDIR)\e_lgamma.obj"
+	-@erase "$(INTDIR)\e_lgamma_r.obj"
+	-@erase "$(INTDIR)\e_log.obj"
+	-@erase "$(INTDIR)\e_log10.obj"
+	-@erase "$(INTDIR)\e_pow.obj"
+	-@erase "$(INTDIR)\e_rem_pio2.obj"
+	-@erase "$(INTDIR)\e_remainder.obj"
+	-@erase "$(INTDIR)\e_scalb.obj"
+	-@erase "$(INTDIR)\e_sinh.obj"
+	-@erase "$(INTDIR)\e_sqrt.obj"
+	-@erase "$(INTDIR)\k_cos.obj"
+	-@erase "$(INTDIR)\k_rem_pio2.obj"
+	-@erase "$(INTDIR)\k_sin.obj"
+	-@erase "$(INTDIR)\k_standard.obj"
+	-@erase "$(INTDIR)\k_tan.obj"
+	-@erase "$(INTDIR)\s_asinh.obj"
+	-@erase "$(INTDIR)\s_atan.obj"
+	-@erase "$(INTDIR)\s_cbrt.obj"
+	-@erase "$(INTDIR)\s_ceil.obj"
+	-@erase "$(INTDIR)\s_copysign.obj"
+	-@erase "$(INTDIR)\s_cos.obj"
+	-@erase "$(INTDIR)\s_erf.obj"
+	-@erase "$(INTDIR)\s_expm1.obj"
+	-@erase "$(INTDIR)\s_fabs.obj"
+	-@erase "$(INTDIR)\s_finite.obj"
+	-@erase "$(INTDIR)\s_floor.obj"
+	-@erase "$(INTDIR)\s_frexp.obj"
+	-@erase "$(INTDIR)\s_ilogb.obj"
+	-@erase "$(INTDIR)\s_isnan.obj"
+	-@erase "$(INTDIR)\s_ldexp.obj"
+	-@erase "$(INTDIR)\s_lib_version.obj"
+	-@erase "$(INTDIR)\s_log1p.obj"
+	-@erase "$(INTDIR)\s_logb.obj"
+	-@erase "$(INTDIR)\s_matherr.obj"
+	-@erase "$(INTDIR)\s_modf.obj"
+	-@erase "$(INTDIR)\s_nextafter.obj"
+	-@erase "$(INTDIR)\s_rint.obj"
+	-@erase "$(INTDIR)\s_scalbn.obj"
+	-@erase "$(INTDIR)\s_signgam.obj"
+	-@erase "$(INTDIR)\s_significand.obj"
+	-@erase "$(INTDIR)\s_sin.obj"
+	-@erase "$(INTDIR)\s_tan.obj"
+	-@erase "$(INTDIR)\s_tanh.obj"
+	-@erase "$(INTDIR)\w_acos.obj"
+	-@erase "$(INTDIR)\w_acosh.obj"
+	-@erase "$(INTDIR)\w_asin.obj"
+	-@erase "$(INTDIR)\w_atan2.obj"
+	-@erase "$(INTDIR)\w_atanh.obj"
+	-@erase "$(INTDIR)\w_cosh.obj"
+	-@erase "$(INTDIR)\w_exp.obj"
+	-@erase "$(INTDIR)\w_fmod.obj"
+	-@erase "$(INTDIR)\w_gamma.obj"
+	-@erase "$(INTDIR)\w_gamma_r.obj"
+	-@erase "$(INTDIR)\w_hypot.obj"
+	-@erase "$(INTDIR)\w_j0.obj"
+	-@erase "$(INTDIR)\w_j1.obj"
+	-@erase "$(INTDIR)\w_jn.obj"
+	-@erase "$(INTDIR)\w_lgamma.obj"
+	-@erase "$(INTDIR)\w_lgamma_r.obj"
+	-@erase "$(INTDIR)\w_log.obj"
+	-@erase "$(INTDIR)\w_log10.obj"
+	-@erase "$(INTDIR)\w_pow.obj"
+	-@erase "$(INTDIR)\w_remainder.obj"
+	-@erase "$(INTDIR)\w_scalb.obj"
+	-@erase "$(INTDIR)\w_sinh.obj"
+	-@erase "$(INTDIR)\w_sqrt.obj"
+	-@erase "$(OUTDIR)\fdlibm.lib"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS"\
+ /Fp"$(INTDIR)/fdlibm.pch" /YX /Fo"$(INTDIR)/" /c 
+CPP_OBJS=.\fdlibm__/
+CPP_SBRS=.\.
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+BSC32_FLAGS=/nologo /o"$(OUTDIR)/fdlibm.bsc" 
+BSC32_SBRS= \
+	
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+LIB32_FLAGS=/nologo /out:"$(OUTDIR)/fdlibm.lib" 
+LIB32_OBJS= \
+	"$(INTDIR)\e_acos.obj" \
+	"$(INTDIR)\e_acosh.obj" \
+	"$(INTDIR)\e_asin.obj" \
+	"$(INTDIR)\e_atan2.obj" \
+	"$(INTDIR)\e_atanh.obj" \
+	"$(INTDIR)\e_cosh.obj" \
+	"$(INTDIR)\e_exp.obj" \
+	"$(INTDIR)\e_fmod.obj" \
+	"$(INTDIR)\e_gamma.obj" \
+	"$(INTDIR)\e_gamma_r.obj" \
+	"$(INTDIR)\e_hypot.obj" \
+	"$(INTDIR)\e_j0.obj" \
+	"$(INTDIR)\e_j1.obj" \
+	"$(INTDIR)\e_jn.obj" \
+	"$(INTDIR)\e_lgamma.obj" \
+	"$(INTDIR)\e_lgamma_r.obj" \
+	"$(INTDIR)\e_log.obj" \
+	"$(INTDIR)\e_log10.obj" \
+	"$(INTDIR)\e_pow.obj" \
+	"$(INTDIR)\e_rem_pio2.obj" \
+	"$(INTDIR)\e_remainder.obj" \
+	"$(INTDIR)\e_scalb.obj" \
+	"$(INTDIR)\e_sinh.obj" \
+	"$(INTDIR)\e_sqrt.obj" \
+	"$(INTDIR)\k_cos.obj" \
+	"$(INTDIR)\k_rem_pio2.obj" \
+	"$(INTDIR)\k_sin.obj" \
+	"$(INTDIR)\k_standard.obj" \
+	"$(INTDIR)\k_tan.obj" \
+	"$(INTDIR)\s_asinh.obj" \
+	"$(INTDIR)\s_atan.obj" \
+	"$(INTDIR)\s_cbrt.obj" \
+	"$(INTDIR)\s_ceil.obj" \
+	"$(INTDIR)\s_copysign.obj" \
+	"$(INTDIR)\s_cos.obj" \
+	"$(INTDIR)\s_erf.obj" \
+	"$(INTDIR)\s_expm1.obj" \
+	"$(INTDIR)\s_fabs.obj" \
+	"$(INTDIR)\s_finite.obj" \
+	"$(INTDIR)\s_floor.obj" \
+	"$(INTDIR)\s_frexp.obj" \
+	"$(INTDIR)\s_ilogb.obj" \
+	"$(INTDIR)\s_isnan.obj" \
+	"$(INTDIR)\s_ldexp.obj" \
+	"$(INTDIR)\s_lib_version.obj" \
+	"$(INTDIR)\s_log1p.obj" \
+	"$(INTDIR)\s_logb.obj" \
+	"$(INTDIR)\s_matherr.obj" \
+	"$(INTDIR)\s_modf.obj" \
+	"$(INTDIR)\s_nextafter.obj" \
+	"$(INTDIR)\s_rint.obj" \
+	"$(INTDIR)\s_scalbn.obj" \
+	"$(INTDIR)\s_signgam.obj" \
+	"$(INTDIR)\s_significand.obj" \
+	"$(INTDIR)\s_sin.obj" \
+	"$(INTDIR)\s_tan.obj" \
+	"$(INTDIR)\s_tanh.obj" \
+	"$(INTDIR)\w_acos.obj" \
+	"$(INTDIR)\w_acosh.obj" \
+	"$(INTDIR)\w_asin.obj" \
+	"$(INTDIR)\w_atan2.obj" \
+	"$(INTDIR)\w_atanh.obj" \
+	"$(INTDIR)\w_cosh.obj" \
+	"$(INTDIR)\w_exp.obj" \
+	"$(INTDIR)\w_fmod.obj" \
+	"$(INTDIR)\w_gamma.obj" \
+	"$(INTDIR)\w_gamma_r.obj" \
+	"$(INTDIR)\w_hypot.obj" \
+	"$(INTDIR)\w_j0.obj" \
+	"$(INTDIR)\w_j1.obj" \
+	"$(INTDIR)\w_jn.obj" \
+	"$(INTDIR)\w_lgamma.obj" \
+	"$(INTDIR)\w_lgamma_r.obj" \
+	"$(INTDIR)\w_log.obj" \
+	"$(INTDIR)\w_log10.obj" \
+	"$(INTDIR)\w_pow.obj" \
+	"$(INTDIR)\w_remainder.obj" \
+	"$(INTDIR)\w_scalb.obj" \
+	"$(INTDIR)\w_sinh.obj" \
+	"$(INTDIR)\w_sqrt.obj"
+
+"$(OUTDIR)\fdlibm.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
+    $(LIB32) @<<
+  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
+<<
+
+!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "fdlibm_0"
+# PROP BASE Intermediate_Dir "fdlibm_0"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "fdlibm_0"
+# PROP Intermediate_Dir "fdlibm_0"
+# PROP Target_Dir ""
+OUTDIR=.\fdlibm_0
+INTDIR=.\fdlibm_0
+
+ALL : "$(OUTDIR)\fdlibm.lib"
+
+CLEAN : 
+	-@erase "$(INTDIR)\e_acos.obj"
+	-@erase "$(INTDIR)\e_acosh.obj"
+	-@erase "$(INTDIR)\e_asin.obj"
+	-@erase "$(INTDIR)\e_atan2.obj"
+	-@erase "$(INTDIR)\e_atanh.obj"
+	-@erase "$(INTDIR)\e_cosh.obj"
+	-@erase "$(INTDIR)\e_exp.obj"
+	-@erase "$(INTDIR)\e_fmod.obj"
+	-@erase "$(INTDIR)\e_gamma.obj"
+	-@erase "$(INTDIR)\e_gamma_r.obj"
+	-@erase "$(INTDIR)\e_hypot.obj"
+	-@erase "$(INTDIR)\e_j0.obj"
+	-@erase "$(INTDIR)\e_j1.obj"
+	-@erase "$(INTDIR)\e_jn.obj"
+	-@erase "$(INTDIR)\e_lgamma.obj"
+	-@erase "$(INTDIR)\e_lgamma_r.obj"
+	-@erase "$(INTDIR)\e_log.obj"
+	-@erase "$(INTDIR)\e_log10.obj"
+	-@erase "$(INTDIR)\e_pow.obj"
+	-@erase "$(INTDIR)\e_rem_pio2.obj"
+	-@erase "$(INTDIR)\e_remainder.obj"
+	-@erase "$(INTDIR)\e_scalb.obj"
+	-@erase "$(INTDIR)\e_sinh.obj"
+	-@erase "$(INTDIR)\e_sqrt.obj"
+	-@erase "$(INTDIR)\k_cos.obj"
+	-@erase "$(INTDIR)\k_rem_pio2.obj"
+	-@erase "$(INTDIR)\k_sin.obj"
+	-@erase "$(INTDIR)\k_standard.obj"
+	-@erase "$(INTDIR)\k_tan.obj"
+	-@erase "$(INTDIR)\s_asinh.obj"
+	-@erase "$(INTDIR)\s_atan.obj"
+	-@erase "$(INTDIR)\s_cbrt.obj"
+	-@erase "$(INTDIR)\s_ceil.obj"
+	-@erase "$(INTDIR)\s_copysign.obj"
+	-@erase "$(INTDIR)\s_cos.obj"
+	-@erase "$(INTDIR)\s_erf.obj"
+	-@erase "$(INTDIR)\s_expm1.obj"
+	-@erase "$(INTDIR)\s_fabs.obj"
+	-@erase "$(INTDIR)\s_finite.obj"
+	-@erase "$(INTDIR)\s_floor.obj"
+	-@erase "$(INTDIR)\s_frexp.obj"
+	-@erase "$(INTDIR)\s_ilogb.obj"
+	-@erase "$(INTDIR)\s_isnan.obj"
+	-@erase "$(INTDIR)\s_ldexp.obj"
+	-@erase "$(INTDIR)\s_lib_version.obj"
+	-@erase "$(INTDIR)\s_log1p.obj"
+	-@erase "$(INTDIR)\s_logb.obj"
+	-@erase "$(INTDIR)\s_matherr.obj"
+	-@erase "$(INTDIR)\s_modf.obj"
+	-@erase "$(INTDIR)\s_nextafter.obj"
+	-@erase "$(INTDIR)\s_rint.obj"
+	-@erase "$(INTDIR)\s_scalbn.obj"
+	-@erase "$(INTDIR)\s_signgam.obj"
+	-@erase "$(INTDIR)\s_significand.obj"
+	-@erase "$(INTDIR)\s_sin.obj"
+	-@erase "$(INTDIR)\s_tan.obj"
+	-@erase "$(INTDIR)\s_tanh.obj"
+	-@erase "$(INTDIR)\w_acos.obj"
+	-@erase "$(INTDIR)\w_acosh.obj"
+	-@erase "$(INTDIR)\w_asin.obj"
+	-@erase "$(INTDIR)\w_atan2.obj"
+	-@erase "$(INTDIR)\w_atanh.obj"
+	-@erase "$(INTDIR)\w_cosh.obj"
+	-@erase "$(INTDIR)\w_exp.obj"
+	-@erase "$(INTDIR)\w_fmod.obj"
+	-@erase "$(INTDIR)\w_gamma.obj"
+	-@erase "$(INTDIR)\w_gamma_r.obj"
+	-@erase "$(INTDIR)\w_hypot.obj"
+	-@erase "$(INTDIR)\w_j0.obj"
+	-@erase "$(INTDIR)\w_j1.obj"
+	-@erase "$(INTDIR)\w_jn.obj"
+	-@erase "$(INTDIR)\w_lgamma.obj"
+	-@erase "$(INTDIR)\w_lgamma_r.obj"
+	-@erase "$(INTDIR)\w_log.obj"
+	-@erase "$(INTDIR)\w_log10.obj"
+	-@erase "$(INTDIR)\w_pow.obj"
+	-@erase "$(INTDIR)\w_remainder.obj"
+	-@erase "$(INTDIR)\w_scalb.obj"
+	-@erase "$(INTDIR)\w_sinh.obj"
+	-@erase "$(INTDIR)\w_sqrt.obj"
+	-@erase "$(OUTDIR)\fdlibm.lib"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+# ADD BASE CPP /nologo /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+CPP_PROJ=/nologo /MLd /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS"\
+ /Fp"$(INTDIR)/fdlibm.pch" /YX /Fo"$(INTDIR)/" /c 
+CPP_OBJS=.\fdlibm_0/
+CPP_SBRS=.\.
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+BSC32_FLAGS=/nologo /o"$(OUTDIR)/fdlibm.bsc" 
+BSC32_SBRS= \
+	
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+LIB32_FLAGS=/nologo /out:"$(OUTDIR)/fdlibm.lib" 
+LIB32_OBJS= \
+	"$(INTDIR)\e_acos.obj" \
+	"$(INTDIR)\e_acosh.obj" \
+	"$(INTDIR)\e_asin.obj" \
+	"$(INTDIR)\e_atan2.obj" \
+	"$(INTDIR)\e_atanh.obj" \
+	"$(INTDIR)\e_cosh.obj" \
+	"$(INTDIR)\e_exp.obj" \
+	"$(INTDIR)\e_fmod.obj" \
+	"$(INTDIR)\e_gamma.obj" \
+	"$(INTDIR)\e_gamma_r.obj" \
+	"$(INTDIR)\e_hypot.obj" \
+	"$(INTDIR)\e_j0.obj" \
+	"$(INTDIR)\e_j1.obj" \
+	"$(INTDIR)\e_jn.obj" \
+	"$(INTDIR)\e_lgamma.obj" \
+	"$(INTDIR)\e_lgamma_r.obj" \
+	"$(INTDIR)\e_log.obj" \
+	"$(INTDIR)\e_log10.obj" \
+	"$(INTDIR)\e_pow.obj" \
+	"$(INTDIR)\e_rem_pio2.obj" \
+	"$(INTDIR)\e_remainder.obj" \
+	"$(INTDIR)\e_scalb.obj" \
+	"$(INTDIR)\e_sinh.obj" \
+	"$(INTDIR)\e_sqrt.obj" \
+	"$(INTDIR)\k_cos.obj" \
+	"$(INTDIR)\k_rem_pio2.obj" \
+	"$(INTDIR)\k_sin.obj" \
+	"$(INTDIR)\k_standard.obj" \
+	"$(INTDIR)\k_tan.obj" \
+	"$(INTDIR)\s_asinh.obj" \
+	"$(INTDIR)\s_atan.obj" \
+	"$(INTDIR)\s_cbrt.obj" \
+	"$(INTDIR)\s_ceil.obj" \
+	"$(INTDIR)\s_copysign.obj" \
+	"$(INTDIR)\s_cos.obj" \
+	"$(INTDIR)\s_erf.obj" \
+	"$(INTDIR)\s_expm1.obj" \
+	"$(INTDIR)\s_fabs.obj" \
+	"$(INTDIR)\s_finite.obj" \
+	"$(INTDIR)\s_floor.obj" \
+	"$(INTDIR)\s_frexp.obj" \
+	"$(INTDIR)\s_ilogb.obj" \
+	"$(INTDIR)\s_isnan.obj" \
+	"$(INTDIR)\s_ldexp.obj" \
+	"$(INTDIR)\s_lib_version.obj" \
+	"$(INTDIR)\s_log1p.obj" \
+	"$(INTDIR)\s_logb.obj" \
+	"$(INTDIR)\s_matherr.obj" \
+	"$(INTDIR)\s_modf.obj" \
+	"$(INTDIR)\s_nextafter.obj" \
+	"$(INTDIR)\s_rint.obj" \
+	"$(INTDIR)\s_scalbn.obj" \
+	"$(INTDIR)\s_signgam.obj" \
+	"$(INTDIR)\s_significand.obj" \
+	"$(INTDIR)\s_sin.obj" \
+	"$(INTDIR)\s_tan.obj" \
+	"$(INTDIR)\s_tanh.obj" \
+	"$(INTDIR)\w_acos.obj" \
+	"$(INTDIR)\w_acosh.obj" \
+	"$(INTDIR)\w_asin.obj" \
+	"$(INTDIR)\w_atan2.obj" \
+	"$(INTDIR)\w_atanh.obj" \
+	"$(INTDIR)\w_cosh.obj" \
+	"$(INTDIR)\w_exp.obj" \
+	"$(INTDIR)\w_fmod.obj" \
+	"$(INTDIR)\w_gamma.obj" \
+	"$(INTDIR)\w_gamma_r.obj" \
+	"$(INTDIR)\w_hypot.obj" \
+	"$(INTDIR)\w_j0.obj" \
+	"$(INTDIR)\w_j1.obj" \
+	"$(INTDIR)\w_jn.obj" \
+	"$(INTDIR)\w_lgamma.obj" \
+	"$(INTDIR)\w_lgamma_r.obj" \
+	"$(INTDIR)\w_log.obj" \
+	"$(INTDIR)\w_log10.obj" \
+	"$(INTDIR)\w_pow.obj" \
+	"$(INTDIR)\w_remainder.obj" \
+	"$(INTDIR)\w_scalb.obj" \
+	"$(INTDIR)\w_sinh.obj" \
+	"$(INTDIR)\w_sqrt.obj"
+
+"$(OUTDIR)\fdlibm.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
+    $(LIB32) @<<
+  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
+<<
+
+!ENDIF 
+
+.c{$(CPP_OBJS)}.obj:
+   $(CPP) $(CPP_PROJ) $<  
+
+.cpp{$(CPP_OBJS)}.obj:
+   $(CPP) $(CPP_PROJ) $<  
+
+.cxx{$(CPP_OBJS)}.obj:
+   $(CPP) $(CPP_PROJ) $<  
+
+.c{$(CPP_SBRS)}.sbr:
+   $(CPP) $(CPP_PROJ) $<  
+
+.cpp{$(CPP_SBRS)}.sbr:
+   $(CPP) $(CPP_PROJ) $<  
+
+.cxx{$(CPP_SBRS)}.sbr:
+   $(CPP) $(CPP_PROJ) $<  
+
+################################################################################
+# Begin Target
+
+# Name "fdlibm - Win32 Release"
+# Name "fdlibm - Win32 Debug"
+
+!IF  "$(CFG)" == "fdlibm - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"
+
+!ENDIF 
+
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_sqrt.c
+DEP_CPP_W_SQR=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_sqrt.obj" : $(SOURCE) $(DEP_CPP_W_SQR) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_acosh.c
+DEP_CPP_E_ACO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_acosh.obj" : $(SOURCE) $(DEP_CPP_E_ACO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_asin.c
+DEP_CPP_E_ASI=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_asin.obj" : $(SOURCE) $(DEP_CPP_E_ASI) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_atan2.c
+DEP_CPP_E_ATA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_atan2.obj" : $(SOURCE) $(DEP_CPP_E_ATA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_atanh.c
+DEP_CPP_E_ATAN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_atanh.obj" : $(SOURCE) $(DEP_CPP_E_ATAN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_cosh.c
+DEP_CPP_E_COS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_cosh.obj" : $(SOURCE) $(DEP_CPP_E_COS) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_exp.c
+DEP_CPP_E_EXP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_exp.obj" : $(SOURCE) $(DEP_CPP_E_EXP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_fmod.c
+DEP_CPP_E_FMO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_fmod.obj" : $(SOURCE) $(DEP_CPP_E_FMO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_gamma.c
+DEP_CPP_E_GAM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_gamma.obj" : $(SOURCE) $(DEP_CPP_E_GAM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_gamma_r.c
+DEP_CPP_E_GAMM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_gamma_r.obj" : $(SOURCE) $(DEP_CPP_E_GAMM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_hypot.c
+DEP_CPP_E_HYP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_hypot.obj" : $(SOURCE) $(DEP_CPP_E_HYP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_j0.c
+DEP_CPP_E_J0_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_j0.obj" : $(SOURCE) $(DEP_CPP_E_J0_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_j1.c
+DEP_CPP_E_J1_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_j1.obj" : $(SOURCE) $(DEP_CPP_E_J1_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_jn.c
+DEP_CPP_E_JN_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_jn.obj" : $(SOURCE) $(DEP_CPP_E_JN_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_lgamma.c
+DEP_CPP_E_LGA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_lgamma.obj" : $(SOURCE) $(DEP_CPP_E_LGA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_lgamma_r.c
+DEP_CPP_E_LGAM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_lgamma_r.obj" : $(SOURCE) $(DEP_CPP_E_LGAM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_log.c
+DEP_CPP_E_LOG=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_log.obj" : $(SOURCE) $(DEP_CPP_E_LOG) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_log10.c
+DEP_CPP_E_LOG1=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_log10.obj" : $(SOURCE) $(DEP_CPP_E_LOG1) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_pow.c
+DEP_CPP_E_POW=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_pow.obj" : $(SOURCE) $(DEP_CPP_E_POW) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_rem_pio2.c
+DEP_CPP_E_REM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_rem_pio2.obj" : $(SOURCE) $(DEP_CPP_E_REM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_remainder.c
+DEP_CPP_E_REMA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_remainder.obj" : $(SOURCE) $(DEP_CPP_E_REMA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_scalb.c
+DEP_CPP_E_SCA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_scalb.obj" : $(SOURCE) $(DEP_CPP_E_SCA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_sinh.c
+DEP_CPP_E_SIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_sinh.obj" : $(SOURCE) $(DEP_CPP_E_SIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_sqrt.c
+DEP_CPP_E_SQR=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_sqrt.obj" : $(SOURCE) $(DEP_CPP_E_SQR) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\fdlibm.h
+
+!IF  "$(CFG)" == "fdlibm - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"
+
+!ENDIF 
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\k_cos.c
+DEP_CPP_K_COS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\k_cos.obj" : $(SOURCE) $(DEP_CPP_K_COS) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\k_rem_pio2.c
+DEP_CPP_K_REM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\k_rem_pio2.obj" : $(SOURCE) $(DEP_CPP_K_REM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\k_sin.c
+DEP_CPP_K_SIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\k_sin.obj" : $(SOURCE) $(DEP_CPP_K_SIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\k_standard.c
+DEP_CPP_K_STA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\k_standard.obj" : $(SOURCE) $(DEP_CPP_K_STA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\k_tan.c
+DEP_CPP_K_TAN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\k_tan.obj" : $(SOURCE) $(DEP_CPP_K_TAN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_asinh.c
+DEP_CPP_S_ASI=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_asinh.obj" : $(SOURCE) $(DEP_CPP_S_ASI) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_atan.c
+DEP_CPP_S_ATA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_atan.obj" : $(SOURCE) $(DEP_CPP_S_ATA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_cbrt.c
+DEP_CPP_S_CBR=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_cbrt.obj" : $(SOURCE) $(DEP_CPP_S_CBR) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_ceil.c
+DEP_CPP_S_CEI=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_ceil.obj" : $(SOURCE) $(DEP_CPP_S_CEI) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_copysign.c
+DEP_CPP_S_COP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_copysign.obj" : $(SOURCE) $(DEP_CPP_S_COP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_cos.c
+DEP_CPP_S_COS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_cos.obj" : $(SOURCE) $(DEP_CPP_S_COS) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_erf.c
+DEP_CPP_S_ERF=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_erf.obj" : $(SOURCE) $(DEP_CPP_S_ERF) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_expm1.c
+DEP_CPP_S_EXP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_expm1.obj" : $(SOURCE) $(DEP_CPP_S_EXP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_fabs.c
+DEP_CPP_S_FAB=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_fabs.obj" : $(SOURCE) $(DEP_CPP_S_FAB) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_finite.c
+DEP_CPP_S_FIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_finite.obj" : $(SOURCE) $(DEP_CPP_S_FIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_floor.c
+DEP_CPP_S_FLO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_floor.obj" : $(SOURCE) $(DEP_CPP_S_FLO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_frexp.c
+DEP_CPP_S_FRE=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_frexp.obj" : $(SOURCE) $(DEP_CPP_S_FRE) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_ilogb.c
+DEP_CPP_S_ILO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_ilogb.obj" : $(SOURCE) $(DEP_CPP_S_ILO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_isnan.c
+DEP_CPP_S_ISN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_isnan.obj" : $(SOURCE) $(DEP_CPP_S_ISN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_ldexp.c
+DEP_CPP_S_LDE=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_ldexp.obj" : $(SOURCE) $(DEP_CPP_S_LDE) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_lib_version.c
+DEP_CPP_S_LIB=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_lib_version.obj" : $(SOURCE) $(DEP_CPP_S_LIB) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_log1p.c
+DEP_CPP_S_LOG=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_log1p.obj" : $(SOURCE) $(DEP_CPP_S_LOG) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_logb.c
+DEP_CPP_S_LOGB=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_logb.obj" : $(SOURCE) $(DEP_CPP_S_LOGB) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_matherr.c
+DEP_CPP_S_MAT=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_matherr.obj" : $(SOURCE) $(DEP_CPP_S_MAT) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_modf.c
+DEP_CPP_S_MOD=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_modf.obj" : $(SOURCE) $(DEP_CPP_S_MOD) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_nextafter.c
+DEP_CPP_S_NEX=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_nextafter.obj" : $(SOURCE) $(DEP_CPP_S_NEX) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_rint.c
+DEP_CPP_S_RIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_rint.obj" : $(SOURCE) $(DEP_CPP_S_RIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_scalbn.c
+DEP_CPP_S_SCA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_scalbn.obj" : $(SOURCE) $(DEP_CPP_S_SCA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_signgam.c
+DEP_CPP_S_SIG=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_signgam.obj" : $(SOURCE) $(DEP_CPP_S_SIG) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_significand.c
+DEP_CPP_S_SIGN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_significand.obj" : $(SOURCE) $(DEP_CPP_S_SIGN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_sin.c
+DEP_CPP_S_SIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_sin.obj" : $(SOURCE) $(DEP_CPP_S_SIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_tan.c
+DEP_CPP_S_TAN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_tan.obj" : $(SOURCE) $(DEP_CPP_S_TAN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\s_tanh.c
+DEP_CPP_S_TANH=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\s_tanh.obj" : $(SOURCE) $(DEP_CPP_S_TANH) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_acos.c
+DEP_CPP_W_ACO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_acos.obj" : $(SOURCE) $(DEP_CPP_W_ACO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_acosh.c
+DEP_CPP_W_ACOS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_acosh.obj" : $(SOURCE) $(DEP_CPP_W_ACOS) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_asin.c
+DEP_CPP_W_ASI=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_asin.obj" : $(SOURCE) $(DEP_CPP_W_ASI) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_atan2.c
+DEP_CPP_W_ATA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_atan2.obj" : $(SOURCE) $(DEP_CPP_W_ATA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_atanh.c
+DEP_CPP_W_ATAN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_atanh.obj" : $(SOURCE) $(DEP_CPP_W_ATAN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_cosh.c
+DEP_CPP_W_COS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_cosh.obj" : $(SOURCE) $(DEP_CPP_W_COS) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_exp.c
+DEP_CPP_W_EXP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_exp.obj" : $(SOURCE) $(DEP_CPP_W_EXP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_fmod.c
+DEP_CPP_W_FMO=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_fmod.obj" : $(SOURCE) $(DEP_CPP_W_FMO) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_gamma.c
+DEP_CPP_W_GAM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_gamma.obj" : $(SOURCE) $(DEP_CPP_W_GAM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_gamma_r.c
+DEP_CPP_W_GAMM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_gamma_r.obj" : $(SOURCE) $(DEP_CPP_W_GAMM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_hypot.c
+DEP_CPP_W_HYP=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_hypot.obj" : $(SOURCE) $(DEP_CPP_W_HYP) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_j0.c
+DEP_CPP_W_J0_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_j0.obj" : $(SOURCE) $(DEP_CPP_W_J0_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_j1.c
+DEP_CPP_W_J1_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_j1.obj" : $(SOURCE) $(DEP_CPP_W_J1_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_jn.c
+DEP_CPP_W_JN_=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_jn.obj" : $(SOURCE) $(DEP_CPP_W_JN_) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_lgamma.c
+DEP_CPP_W_LGA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_lgamma.obj" : $(SOURCE) $(DEP_CPP_W_LGA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_lgamma_r.c
+DEP_CPP_W_LGAM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_lgamma_r.obj" : $(SOURCE) $(DEP_CPP_W_LGAM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_log.c
+DEP_CPP_W_LOG=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_log.obj" : $(SOURCE) $(DEP_CPP_W_LOG) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_log10.c
+DEP_CPP_W_LOG1=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_log10.obj" : $(SOURCE) $(DEP_CPP_W_LOG1) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_pow.c
+DEP_CPP_W_POW=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_pow.obj" : $(SOURCE) $(DEP_CPP_W_POW) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_remainder.c
+DEP_CPP_W_REM=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_remainder.obj" : $(SOURCE) $(DEP_CPP_W_REM) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_scalb.c
+DEP_CPP_W_SCA=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_scalb.obj" : $(SOURCE) $(DEP_CPP_W_SCA) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\w_sinh.c
+DEP_CPP_W_SIN=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\w_sinh.obj" : $(SOURCE) $(DEP_CPP_W_SIN) "$(INTDIR)"
+
+
+# End Source File
+################################################################################
+# Begin Source File
+
+SOURCE=.\e_acos.c
+DEP_CPP_E_ACOS=\
+	".\fdlibm.h"\
+	
+
+"$(INTDIR)\e_acos.obj" : $(SOURCE) $(DEP_CPP_E_ACOS) "$(INTDIR)"
+
+
+# End Source File
+# End Target
+# End Project
+################################################################################