jinda 0.7.7.2 → 0.7.7.3

data/test/dummy/config/mongoid.yml-localhost

@@ -0,0 +1,182 @@
+development:
+  # Configure available database clients. (required)
+  clients:
+    # Defines the default client. (required)
+    default:
+      # Mongoid can connect to a URI accepted by the driver:
+      # uri: mongodb://user:password@mongodb.domain.com:27017/shop263603_development
+
+      # Otherwise define the parameters separately.
+      # This defines the name of the default database that Mongoid can connect to.
+      # (required).
+      database: shop263603_development
+      # Provides the hosts the default client can connect to. Must be an array
+      # of host:port pairs. (required)
+      hosts:
+        - localhost:27017
+        # - mongodb
+      options:
+        # Note that all options listed below are Ruby driver client options (the mongo gem).
+        # Please refer to the driver documentation of the version of the mongo gem you are using
+        # for the most up-to-date list of options.
+        #
+        # Change the default write concern. (default = { w: 1 })
+        # write:
+        #   w: 1
+
+        # Change the default read preference. Valid options for mode are: :secondary,
+        # :secondary_preferred, :primary, :primary_preferred, :nearest
+        # (default: primary)
+        # read:
+        #   mode: :secondary_preferred
+        #   tag_sets:
+        #     - use: web
+
+        # The name of the user for authentication.
+        # user: 'user'
+
+        # The password of the user for authentication.
+        # password: 'password'
+
+        # The user's database roles.
+        # roles:
+        #   - 'dbOwner'
+
+        # Change the default authentication mechanism. Valid options are: :scram,
+        # :mongodb_cr, :mongodb_x509, and :plain. Note that all authentication
+        # mechanisms require username and password, with the exception of :mongodb_x509.
+        # Default on mongoDB 3.0 is :scram, default on 2.4 and 2.6 is :plain.
+        # auth_mech: :scram
+
+        # The database or source to authenticate the user against.
+        # (default: the database specified above or admin)
+        # auth_source: admin
+
+        # Force a the driver cluster to behave in a certain manner instead of auto-
+        # discovering. Can be one of: :direct, :replica_set, :sharded. Set to :direct
+        # when connecting to hidden members of a replica set.
+        # connect: :direct
+
+        # Changes the default time in seconds the server monitors refresh their status
+        # via ismaster commands. (default: 10)
+        # heartbeat_frequency: 10
+
+        # The time in seconds for selecting servers for a near read preference. (default: 0.015)
+        # local_threshold: 0.015
+
+        # The timeout in seconds for selecting a server for an operation. (default: 30)
+        # server_selection_timeout: 30
+
+        # The maximum number of connections in the connection pool. (default: 5)
+        # max_pool_size: 5
+
+        # The minimum number of connections in the connection pool. (default: 1)
+        # min_pool_size: 1
+
+        # The time to wait, in seconds, in the connection pool for a connection
+        # to be checked in before timing out. (default: 5)
+        # wait_queue_timeout: 5
+
+        # The time to wait to establish a connection before timing out, in seconds.
+        # (default: 10)
+        # connect_timeout: 10
+
+        # The timeout to wait to execute operations on a socket before raising an error.
+        # (default: 5)
+        # socket_timeout: 5
+
+        # The name of the replica set to connect to. Servers provided as seeds that do
+        # not belong to this replica set will be ignored.
+        # replica_set: name
+
+        # Whether to connect to the servers via ssl. (default: false)
+        # ssl: true
+
+        # The certificate file used to identify the connection against MongoDB.
+        # ssl_cert: /path/to/my.cert
+
+        # The private keyfile used to identify the connection against MongoDB.
+        # Note that even if the key is stored in the same file as the certificate,
+        # both need to be explicitly specified.
+        # ssl_key: /path/to/my.key
+
+        # A passphrase for the private key.
+        # ssl_key_pass_phrase: password
+
+        # Whether to do peer certification validation. (default: true)
+        # ssl_verify: true
+
+        # The file containing concatenated certificate authority certificates
+        # used to validate certs passed from the other end of the connection.
+        # ssl_ca_cert: /path/to/ca.cert
+        
+        # Whether to truncate long log lines. (default: true)
+        # truncate_logs: true
+
+  # Configure Mongoid specific options. (optional)
+  options:
+    # Includes the root model name in json serialization. (default: false)
+    # include_root_in_json: false
+
+    # Include the _type field in serialization. (default: false)
+    # include_type_for_serialization: false
+
+    # Preload all models in development, needed when models use
+    # inheritance. (default: false)
+    # preload_models: false
+
+    # Raise an error when performing a #find and the document is not found.
+    # (default: true)
+    # raise_not_found_error: true
+    raise_not_found_error: false
+
+    # Raise an error when defining a scope with the same name as an
+    # existing method. (default: false)
+    # scope_overwrite_exception: false
+
+    # Raise an error when defining a field with the same name as an
+    # existing method. (default: false)
+    # duplicate_fields_exception: false
+
+    # Use Active Support's time zone in conversions. (default: true)
+    # use_activesupport_time_zone: true
+
+    # Ensure all times are UTC in the app side. (default: false)
+    # use_utc: false
+
+    # Set the Mongoid and Ruby driver log levels when not in a Rails
+    # environment. The Mongoid logger will be set to the Rails logger
+    # otherwise.(default: :info)
+    # log_level: :info
+
+    # Control whether `belongs_to` association is required. By default
+    # `belongs_to` will trigger a validation error if the association
+    # is not present. (default: true)
+    # belongs_to_required_by_default: true
+    belongs_to_required_by_default: false
+
+    # Application name that is printed to the mongodb logs upon establishing a
+    # connection in server versions >= 3.4. Note that the name cannot exceed 128 bytes.
+    # app_name: MyApplicationName
+
+production:
+  clients:
+    default:
+      uri: <%= ENV['MONGODB_URI'] %>
+  options:
+    raise_not_found_error: false
+    belongs_to_required_by_default: false
+
+
+    # Use background indexes by default if `background` option not specified. (default: false)
+    # background_indexing: false
+test:
+  clients:
+    default:
+      database: shop263603_test
+      hosts:
+        - localhost:27017
+      options:
+        read:
+          mode: :primary
+        max_pool_size: 1

data/test/dummy/config/puma.rb

@@ -8,9 +8,14 @@ max_threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
 min_threads_count = ENV.fetch("RAILS_MIN_THREADS") { max_threads_count }
 threads min_threads_count, max_threads_count
 
+# Specifies the `worker_timeout` threshold that Puma will use to wait before
+# terminating a worker in development environments.
+#
+worker_timeout 3600 if ENV.fetch("RAILS_ENV", "development") == "development"
+
 # Specifies the `port` that Puma will listen on to receive requests; default is 3000.
 #
-port        ENV.fetch("PORT") { 3000 }
+port ENV.fetch("PORT") { 3000 }
 
 # Specifies the `environment` that Puma will run in.
 #
@@ -34,5 +39,5 @@ pidfile ENV.fetch("PIDFILE") { "tmp/pids/server.pid" }
 #
 # preload_app!
 
-# Allow puma to be restarted by `rails restart` command.
+# Allow puma to be restarted by `bin/rails restart` command.
 plugin :tmp_restart

data/test/dummy/config/routes.rb

@@ -1,3 +1,7 @@
 Rails.application.routes.draw do
-  mount Jinda::Engine => "/"
+  root :to => 'jinda#index'
+  # Define your application routes per the DSL in https://guides.rubyonrails.org/routing.html
+
+  # Defines the root path route ("/")
+  # root "articles#index"
 end

data/test/dummy/config.ru

@@ -1,5 +1,6 @@
 # This file is used by Rack-based servers to start the application.
 
-require_relative 'config/environment'
+require_relative "config/environment"
 
 run Rails.application
+Rails.application.load_server

data/test/dummy/db/seeds.rb

@@ -0,0 +1,6 @@
+unless Identity.where(code:"admin").exists?
+  identity= Identity.create :code => "admin", :email => "admin@test.com", :password => "secret",
+    :password_confirmation => "secret"
+  User.create :provider => "identity", :uid => identity.id.to_s, :code => identity.code,
+    :email => identity.email, :role => "M,A,D"
+end

data/test/dummy/docker-compose.yml

@@ -0,0 +1,19 @@
+version: '3.5'
+services:
+  web:
+    build: .
+    env_file: .env
+    command: bash -c "rm -f tmp/pids/server.pid && bundle exec rails s -p 3000 -b '0.0.0.0'"
+    volumes:
+      - .:/myapp
+    ports:
+      - "3000:3000"
+    depends_on:
+      - mongodb
+
+  mongodb:
+    image: mongo
+    volumes:
+          - ./Sandbox:/data/db
+    ports:
+      - "27888:27017"

data/test/dummy/dot/dot.env

@@ -0,0 +1,2 @@
+FACEBOOK_API="16x"
+FACEBOOK_KEY="32x"

data/test/dummy/entrypoint.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+set -e
+# change mongoid.yml for docker
+cp /myapp/config/mongoid.yml-docker /myapp/config/mongoid.yml
+# Remove a potentially pre-existing server.pid for Rails.
+rm -f /myapp/tmp/pids/server.pid
+# Compile the assets
+bundle exec rake assets:precompile
+# Add admin user
+# rake db:seed
+rake jinda:seed
+# Then exec the container's main process (what's set as CMD in the Dockerfile).
+exec "$@"