javonet-ruby-sdk 2.1.0 → 2.1.2

data/lib/javonet-ruby-sdk/Binaries/Perl/Linux/X64/deps/lib/perl5/LWP/Protocol/http.pm

@@ -1,523 +0,0 @@
-package LWP::Protocol::http;
-
-use strict;
-
-our $VERSION = '6.68';
-
-require HTTP::Response;
-require HTTP::Status;
-require Net::HTTP;
-
-use parent qw(LWP::Protocol);
-
-our @EXTRA_SOCK_OPTS;
-my $CRLF = "\015\012";
-
-sub _new_socket
-{
-    my($self, $host, $port, $timeout) = @_;
-
-    # IPv6 literal IP address should be [bracketed] to remove
-    # ambiguity between ip address and port number.
-    if ( ($host =~ /:/) && ($host !~ /^\[/) ) {
-      $host = "[$host]";
-    }
-
-    local($^W) = 0;  # IO::Socket::INET can be noisy
-    my $sock = $self->socket_class->new(PeerAddr => $host,
-					PeerPort => $port,
-					LocalAddr => $self->{ua}{local_address},
-					Proto    => 'tcp',
-					Timeout  => $timeout,
-					KeepAlive => !!$self->{ua}{conn_cache},
-					SendTE    => $self->{ua}{send_te},
-					$self->_extra_sock_opts($host, $port),
-				       );
-
-    unless ($sock) {
-	# IO::Socket::INET leaves additional error messages in $@
-	my $status = "Can't connect to $host:$port";
-	if ($@ =~ /\bconnect: (.*)/ ||
-	    $@ =~ /\b(Bad hostname)\b/ ||
-	    $@ =~ /\b(nodename nor servname provided, or not known)\b/ ||
-	    $@ =~ /\b(certificate verify failed)\b/ ||
-	    $@ =~ /\b(Crypt-SSLeay can't verify hostnames)\b/
-	) {
-	    $status .= " ($1)";
-	} elsif ($@) {
-	    $status .= " ($@)";
-	}
-	die "$status\n\n$@";
-    }
-
-    # perl 5.005's IO::Socket does not have the blocking method.
-    eval { $sock->blocking(0); };
-
-    $sock;
-}
-
-sub socket_type
-{
-    return "http";
-}
-
-sub socket_class
-{
-    my $self = shift;
-    (ref($self) || $self) . "::Socket";
-}
-
-sub _extra_sock_opts  # to be overridden by subclass
-{
-    return @EXTRA_SOCK_OPTS;
-}
-
-sub _check_sock
-{
-    #my($self, $req, $sock) = @_;
-}
-
-sub _get_sock_info
-{
-    my($self, $res, $sock) = @_;
-    if (defined(my $peerhost = $sock->peerhost)) {
-        $res->header("Client-Peer" => "$peerhost:" . $sock->peerport);
-    }
-}
-
-sub _fixup_header
-{
-    my($self, $h, $url, $proxy) = @_;
-
-    # Extract 'Host' header
-    my $hhost = $url->authority;
-    if ($hhost =~ s/^([^\@]*)\@//) {  # get rid of potential "user:pass@"
-	# add authorization header if we need them.  HTTP URLs do
-	# not really support specification of user and password, but
-	# we allow it.
-	if (defined($1) && not $h->header('Authorization')) {
-	    require URI::Escape;
-	    $h->authorization_basic(map URI::Escape::uri_unescape($_),
-				    split(":", $1, 2));
-	}
-    }
-    $h->init_header('Host' => $hhost);
-
-    if ($proxy && $url->scheme ne 'https') {
-	# Check the proxy URI's userinfo() for proxy credentials
-	# export http_proxy="http://proxyuser:proxypass@proxyhost:port".
-	# For https only the initial CONNECT requests needs authorization.
-	my $p_auth = $proxy->userinfo();
-	if(defined $p_auth) {
-	    require URI::Escape;
-	    $h->proxy_authorization_basic(map URI::Escape::uri_unescape($_),
-					  split(":", $p_auth, 2))
-	}
-    }
-}
-
-sub hlist_remove {
-    my($hlist, $k) = @_;
-    $k = lc $k;
-    for (my $i = @$hlist - 2; $i >= 0; $i -= 2) {
-	next unless lc($hlist->[$i]) eq $k;
-	splice(@$hlist, $i, 2);
-    }
-}
-
-sub request
-{
-    my($self, $request, $proxy, $arg, $size, $timeout) = @_;
-
-    $size ||= 4096;
-
-    # check method
-    my $method = $request->method;
-    unless ($method =~ /^[A-Za-z0-9_!\#\$%&\'*+\-.^\`|~]+$/) {  # HTTP token
-	return HTTP::Response->new( HTTP::Status::RC_BAD_REQUEST,
-				  'Library does not allow method ' .
-				  "$method for 'http:' URLs");
-    }
-
-    my $url = $request->uri;
-
-    # Proxying SSL with a http proxy needs issues a CONNECT request to build a
-    # tunnel and then upgrades the tunnel to SSL. But when doing keep-alive the
-    # https request does not need to be the first request in the connection, so
-    # we need to distinguish between
-    # - not yet connected (create socket and ssl upgrade)
-    # - connected but not inside ssl tunnel (ssl upgrade)
-    # - inside ssl tunnel to the target - once we are in the tunnel to the
-    #   target we cannot only reuse the tunnel for more https requests with the
-    #   same target
-
-    my $ssl_tunnel = $proxy && $url->scheme eq 'https'
-	&& $url->host.":".$url->port;
-
-    my ($host,$port) = $proxy
-	? ($proxy->host,$proxy->port)
-	: ($url->host,$url->port);
-    my $fullpath =
-	$method eq 'CONNECT' ? $url->host . ":" . $url->port :
-	$proxy && ! $ssl_tunnel ? $url->as_string :
-	do {
-	    my $path = $url->path_query;
-	    $path = "/$path" if $path !~m{^/};
-	    $path
-	};
-
-    my $socket;
-    my $conn_cache = $self->{ua}{conn_cache};
-    my $cache_key;
-    if ( $conn_cache ) {
-	$cache_key = "$host:$port";
-	# For https we reuse the socket immediately only if it has an established
-	# tunnel to the target. Otherwise a CONNECT request followed by an SSL
-	# upgrade need to be done first. The request itself might reuse an
-	# existing non-ssl connection to the proxy
-	$cache_key .= "!".$ssl_tunnel if $ssl_tunnel;
-	if ( $socket = $conn_cache->withdraw($self->socket_type,$cache_key)) {
-	    if ($socket->can_read(0)) {
-		# if the socket is readable, then either the peer has closed the
-		# connection or there are some garbage bytes on it.  In either
-		# case we abandon it.
-		$socket->close;
-		$socket = undef;
-	    } # else use $socket
-	    else {
-		$socket->timeout($timeout);
-	    }
-	}
-    }
-
-    if ( ! $socket && $ssl_tunnel ) {
-	my $proto_https = LWP::Protocol::create('https',$self->{ua})
-	    or die "no support for scheme https found";
-
-	# only if ssl socket class is IO::Socket::SSL we can upgrade
-	# a plain socket to SSL. In case of Net::SSL we fall back to
-	# the old version
-	if ( my $upgrade_sub = $proto_https->can('_upgrade_sock')) {
-	    my $response = $self->request(
-		HTTP::Request->new('CONNECT',"http://$ssl_tunnel"),
-		$proxy,
-		undef,$size,$timeout
-	    );
-	    $response->is_success or die
-		"establishing SSL tunnel failed: ".$response->status_line;
-	    $socket = $upgrade_sub->($proto_https,
-		$response->{client_socket},$url)
-		or die "SSL upgrade failed: $@";
-	} else {
-	    $socket = $proto_https->_new_socket($url->host,$url->port,$timeout);
-	}
-    }
-
-    if ( ! $socket ) {
-	# connect to remote site w/o reusing established socket
-	$socket = $self->_new_socket($host, $port, $timeout );
-    }
-
-    my $http_version = "";
-    if (my $proto = $request->protocol) {
-	if ($proto =~ /^(?:HTTP\/)?(1.\d+)$/) {
-	    $http_version = $1;
-	    $socket->http_version($http_version);
-	    $socket->send_te(0) if $http_version eq "1.0";
-	}
-    }
-
-    $self->_check_sock($request, $socket);
-
-    my @h;
-    my $request_headers = $request->headers->clone;
-    $self->_fixup_header($request_headers, $url, $proxy);
-
-    $request_headers->scan(sub {
-			       my($k, $v) = @_;
-			       $k =~ s/^://;
-			       $v =~ tr/\n/ /;
-			       push(@h, $k, $v);
-			   });
-
-    my $content_ref = $request->content_ref;
-    $content_ref = $$content_ref if ref($$content_ref);
-    my $chunked;
-    my $has_content;
-
-    if (ref($content_ref) eq 'CODE') {
-	my $clen = $request_headers->header('Content-Length');
-	$has_content++ if $clen;
-	unless (defined $clen) {
-	    push(@h, "Transfer-Encoding" => "chunked");
-	    $has_content++;
-	    $chunked++;
-	}
-    }
-    else {
-	# Set (or override) Content-Length header
-	my $clen = $request_headers->header('Content-Length');
-	if (defined($$content_ref) && length($$content_ref)) {
-	    $has_content = length($$content_ref);
-	    if (!defined($clen) || $clen ne $has_content) {
-		if (defined $clen) {
-		    warn "Content-Length header value was wrong, fixed";
-		    hlist_remove(\@h, 'Content-Length');
-		}
-		push(@h, 'Content-Length' => $has_content);
-	    }
-	}
-	elsif ($clen) {
-	    warn "Content-Length set when there is no content, fixed";
-	    hlist_remove(\@h, 'Content-Length');
-	}
-    }
-
-    my $write_wait = 0;
-    $write_wait = 2
-	if ($request_headers->header("Expect") || "") =~ /100-continue/;
-
-    my $req_buf = $socket->format_request($method, $fullpath, @h);
-    #print "------\n$req_buf\n------\n";
-
-    if (!$has_content || $write_wait || $has_content > 8*1024) {
-      WRITE:
-        {
-            # Since this just writes out the header block it should almost
-            # always succeed to send the whole buffer in a single write call.
-            my $n = $socket->syswrite($req_buf, length($req_buf));
-            unless (defined $n) {
-                redo WRITE if $!{EINTR};
-                if ($!{EWOULDBLOCK} || $!{EAGAIN}) {
-                    select(undef, undef, undef, 0.1);
-                    redo WRITE;
-                }
-                die "write failed: $!";
-            }
-            if ($n) {
-                substr($req_buf, 0, $n, "");
-            }
-            else {
-                select(undef, undef, undef, 0.5);
-            }
-            redo WRITE if length $req_buf;
-        }
-    }
-
-    my($code, $mess, @junk);
-    my $drop_connection;
-
-    if ($has_content) {
-	my $eof;
-	my $wbuf;
-	my $woffset = 0;
-      INITIAL_READ:
-	if ($write_wait) {
-	    # skip filling $wbuf when waiting for 100-continue
-	    # because if the response is a redirect or auth required
-	    # the request will be cloned and there is no way
-	    # to reset the input stream
-	    # return here via the label after the 100-continue is read
-	}
-	elsif (ref($content_ref) eq 'CODE') {
-	    my $buf = &$content_ref();
-	    $buf = "" unless defined($buf);
-	    $buf = sprintf "%x%s%s%s", length($buf), $CRLF, $buf, $CRLF
-		if $chunked;
-	    substr($buf, 0, 0) = $req_buf if $req_buf;
-	    $wbuf = \$buf;
-	}
-	else {
-	    if ($req_buf) {
-		my $buf = $req_buf . $$content_ref;
-		$wbuf = \$buf;
-	    }
-	    else {
-		$wbuf = $content_ref;
-	    }
-	    $eof = 1;
-	}
-
-	my $fbits = '';
-	vec($fbits, fileno($socket), 1) = 1;
-
-      WRITE:
-	while ($write_wait || $woffset < length($$wbuf)) {
-
-	    my $sel_timeout = $timeout;
-	    if ($write_wait) {
-		$sel_timeout = $write_wait if $write_wait < $sel_timeout;
-	    }
-	    my $time_before;
-            $time_before = time if $sel_timeout;
-
-	    my $rbits = $fbits;
-	    my $wbits = $write_wait ? undef : $fbits;
-            my $sel_timeout_before = $sel_timeout;
-          SELECT:
-            {
-                my $nfound = select($rbits, $wbits, undef, $sel_timeout);
-                if ($nfound < 0) {
-                    if ($!{EINTR} || $!{EWOULDBLOCK} || $!{EAGAIN}) {
-                        if ($time_before) {
-                            $sel_timeout = $sel_timeout_before - (time - $time_before);
-                            $sel_timeout = 0 if $sel_timeout < 0;
-                        }
-                        redo SELECT;
-                    }
-                    die "select failed: $!";
-                }
-	    }
-
-	    if ($write_wait) {
-		$write_wait -= time - $time_before;
-		$write_wait = 0 if $write_wait < 0;
-	    }
-
-	    if (defined($rbits) && $rbits =~ /[^\0]/) {
-		# readable
-		my $buf = $socket->_rbuf;
-		my $n = $socket->sysread($buf, 1024, length($buf));
-                unless (defined $n) {
-                    die "read failed: $!" unless  $!{EINTR} || $!{EWOULDBLOCK} || $!{EAGAIN};
-                    # if we get here the rest of the block will do nothing
-                    # and we will retry the read on the next round
-                }
-		elsif ($n == 0) {
-                    # the server closed the connection before we finished
-                    # writing all the request content.  No need to write any more.
-                    $drop_connection++;
-                    last WRITE;
-		}
-		$socket->_rbuf($buf);
-		if (!$code && $buf =~ /\015?\012\015?\012/) {
-		    # a whole response header is present, so we can read it without blocking
-		    ($code, $mess, @h) = $socket->read_response_headers(laxed => 1,
-									junk_out => \@junk,
-								       );
-		    if ($code eq "100") {
-			$write_wait = 0;
-			undef($code);
-			goto INITIAL_READ;
-		    }
-		    else {
-			$drop_connection++;
-			last WRITE;
-			# XXX should perhaps try to abort write in a nice way too
-		    }
-		}
-	    }
-	    if (defined($wbits) && $wbits =~ /[^\0]/) {
-		my $n = $socket->syswrite($$wbuf, length($$wbuf), $woffset);
-                unless (defined $n) {
-                    die "write failed: $!" unless $!{EINTR} || $!{EWOULDBLOCK} || $!{EAGAIN};
-                    $n = 0;  # will retry write on the next round
-                }
-                elsif ($n == 0) {
-		    die "write failed: no bytes written";
-		}
-		$woffset += $n;
-
-		if (!$eof && $woffset >= length($$wbuf)) {
-		    # need to refill buffer from $content_ref code
-		    my $buf = &$content_ref();
-		    $buf = "" unless defined($buf);
-		    $eof++ unless length($buf);
-		    $buf = sprintf "%x%s%s%s", length($buf), $CRLF, $buf, $CRLF
-			if $chunked;
-		    $wbuf = \$buf;
-		    $woffset = 0;
-		}
-	    }
-	} # WRITE
-    }
-
-    ($code, $mess, @h) = $socket->read_response_headers(laxed => 1, junk_out => \@junk)
-	unless $code;
-    ($code, $mess, @h) = $socket->read_response_headers(laxed => 1, junk_out => \@junk)
-	if $code eq "100";
-
-    my $response = HTTP::Response->new($code, $mess);
-    my $peer_http_version = $socket->peer_http_version;
-    $response->protocol("HTTP/$peer_http_version");
-    {
-	local $HTTP::Headers::TRANSLATE_UNDERSCORE;
-	$response->push_header(@h);
-    }
-    $response->push_header("Client-Junk" => \@junk) if @junk;
-
-    $response->request($request);
-    $self->_get_sock_info($response, $socket);
-
-    if ($method eq "CONNECT") {
-	$response->{client_socket} = $socket;  # so it can be picked up
-	return $response;
-    }
-
-    if (my @te = $response->remove_header('Transfer-Encoding')) {
-	$response->push_header('Client-Transfer-Encoding', \@te);
-    }
-    $response->push_header('Client-Response-Num', scalar $socket->increment_response_count);
-
-    my $complete;
-    $response = $self->collect($arg, $response, sub {
-	my $buf = ""; #prevent use of uninitialized value in SSLeay.xs
-	my $n;
-      READ:
-	{
-	    $n = $socket->read_entity_body($buf, $size);
-            unless (defined $n) {
-                redo READ if $!{EINTR} || $!{EWOULDBLOCK} || $!{EAGAIN} || $!{ENOTTY};
-                die "read failed: $!";
-            }
-	    redo READ if $n == -1;
-	}
-	$complete++ if !$n;
-        return \$buf;
-    } );
-    $drop_connection++ unless $complete;
-
-    @h = $socket->get_trailers;
-    if (@h) {
-	local $HTTP::Headers::TRANSLATE_UNDERSCORE;
-	$response->push_header(@h);
-    }
-
-    # keep-alive support
-    unless ($drop_connection) {
-	if ($cache_key) {
-	    my %connection = map { (lc($_) => 1) }
-		             split(/\s*,\s*/, ($response->header("Connection") || ""));
-	    if (($peer_http_version eq "1.1" && !$connection{close}) ||
-		$connection{"keep-alive"})
-	    {
-		$conn_cache->deposit($self->socket_type, $cache_key, $socket);
-	    }
-	}
-    }
-
-    $response;
-}
-
-
-#-----------------------------------------------------------
-package # hide from PAUSE
-    LWP::Protocol::http::SocketMethods;
-
-sub ping {
-    my $self = shift;
-    !$self->can_read(0);
-}
-
-sub increment_response_count {
-    my $self = shift;
-    return ++${*$self}{'myhttp_response_count'};
-}
-
-#-----------------------------------------------------------
-package # hide from PAUSE
-    LWP::Protocol::http::Socket;
-
-use parent -norequire, qw(LWP::Protocol::http::SocketMethods Net::HTTP);
-
-1;

data/lib/javonet-ruby-sdk/Binaries/Perl/Linux/X64/deps/lib/perl5/LWP/Protocol/loopback.pm

@@ -1,27 +0,0 @@
-package LWP::Protocol::loopback;
-
-use strict;
-
-our $VERSION = '6.68';
-
-require HTTP::Response;
-
-use parent qw(LWP::Protocol);
-
-sub request {
-    my($self, $request, $proxy, $arg, $size, $timeout) = @_;
-
-    my $response = HTTP::Response->new(200, "OK");
-    $response->content_type("message/http; msgtype=request");
-
-    $response->header("Via", "loopback/1.0 $proxy")
-	if $proxy;
-
-    $response->header("X-Arg", $arg);
-    $response->header("X-Read-Size", $size);
-    $response->header("X-Timeout", $timeout);
-
-    return $self->collect_once($arg, $response, $request->as_string);
-}
-
-1;