jabe 0.5.0

data/public/nginx.conf

@@ -0,0 +1,108 @@
+# Set another default user than root for security reasons
+user       www www;
+
+# As a thumb rule: One per CPU. If you are serving a large amount
+# of static files, which requires blocking disk reads, you may want
+# to increase this from the number of cpu_cores available on your
+# system.
+#
+# The maximum number of connections for Nginx is calculated by:
+# max_clients = worker_processes * worker_connections
+worker_processes 1;
+
+# Maximum file descriptors that can be opened per process
+# This should be > worker_connections
+worker_rlimit_nofile 8192;
+
+events {
+  # When you need > 8000 * cpu_cores connections, you start optimizing
+  # your OS, and this is probably the point at where you hire people
+  # who are smarter than you, this is *a lot* of requests.
+  worker_connections  8000;
+
+  # This sets up some smart queueing for accept(2)'ing requests
+  # Set it to "on" if you have > worker_processes
+  accept_mutex off;
+
+  # These settings are OS specific, by defualt Nginx uses select(2),
+  # however, for a large number of requests epoll(2) and kqueue(2)
+  # are generally faster than the default (select(2))
+  # use epoll; # enable for Linux 2.6+
+  # use kqueue; # enable for *BSD (FreeBSD, OS X, ..)
+}
+
+# Change these paths to somewhere that suits you!
+error_log  logs/error.log;
+pid        logs/nginx.pid;
+
+http {
+  # Set the mime-types
+  include       mime.types;
+
+  # And the fallback mime-type
+  default_type  application/octet-stream;
+
+  # Format for our log files
+  log_format   main '$remote_addr - $remote_user [$time_local]  $status '
+    '"$request" $body_bytes_sent "$http_referer" '
+    '"$http_user_agent" "$http_x_forwarded_for"';
+
+  # Click tracking!
+  access_log   logs/access.log  main;
+
+  # ~2 seconds is often enough for HTML/CSS, but connections in
+  # Nginx are cheap, so generally it's safe to increase it
+  keepalive_timeout  5;
+
+  # You usually want to serve static files with Nginx
+  sendfile on;
+
+  tcp_nopush on; # off may be better for Comet/long-poll stuff
+  tcp_nodelay off; # on may be better for Comet/long-poll stuff
+
+  # Enable Gzip
+  gzip  on;
+  gzip_http_version 1.0;
+  gzip_comp_level 2;
+  gzip_min_length 1100;
+  gzip_buffers     4 8k;
+  gzip_proxied any;
+  gzip_types text/html text/plain text/xml application/xml application/xml+rss text/css text/javascript application/javascript application/json;
+
+  gzip_static on;
+
+  gzip_proxied        expired no-cache no-store private auth;
+  gzip_disable        "MSIE [1-6]\.";
+  gzip_vary           on;
+
+  server {
+    # listen 80 default deferred; # for Linux
+    # listen 80 default accept_filter=httpready; # for FreeBSD
+    listen 80 default;
+
+    # e.g. "localhost" to accept all connections, or "www.example.com"
+    # to handle the requests for "example.com" (and www.example.com)
+    server_name _;
+
+    # Path for static files
+    root /sites/example.com/public;
+
+    expires 1M;
+
+    # Static assets
+    location ~* ^.+\.(manifest)$ {
+      expires -1D;
+      root   /sites/example.com/public;
+      access_log logs/static.log;
+    }
+
+    location ~* ^.+\.(ico|ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|css|rss|atom|js|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ {
+      # Only set expires max IFF the file is a static file and exists
+      if (-f $request_filename) {
+        expires max;
+        root   /sites/example.com/public;
+        access_log logs/static.log;
+      }
+    }
+  }
+}

data/public/robots.txt

@@ -0,0 +1,5 @@
+# www.robotstxt.org/
+# www.google.com/support/webmasters/bin/answer.py?hl=en&answer=156449
+
+User-agent: *
+

data/spec/support/blueprints.rb

@@ -0,0 +1,31 @@
+require 'machinist/active_record'
+
+# takes care of
+# Validation failed: Email has already been taken (ActiveRecord::RecordInvalid)
+Machinist.configure do |config|
+  config.cache_objects = false
+end
+
+Admin.blueprint do
+  email { 'admin@example.com' }
+  password { 'password' }
+  password_confirmation { 'password' }
+end
+
+Settings.blueprint do
+  # Attributes here
+end
+
+Entry.blueprint do
+  title { Faker::Lorem.words.to_s }
+  body { Faker::Lorem.paragraph }
+  published_at { Time.now }
+end
+
+Entry.blueprint(:published) do
+  draft { false }
+end
+
+Comment.blueprint do
+  # Attributes here
+end

data/test/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,3 @@
+class ApplicationController < ActionController::Base
+  protect_from_forgery
+end

data/test/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/test/dummy/config/application.rb

@@ -0,0 +1,45 @@
+require File.expand_path('../boot', __FILE__)
+
+require "active_model/railtie"
+require "active_record/railtie"
+require "action_controller/railtie"
+require "action_view/railtie"
+require "action_mailer/railtie"
+
+Bundler.require
+require "jabe"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Custom directories with classes and modules you want to be autoloadable.
+    # config.autoload_paths += %W(#{config.root}/extras)
+
+    # Only load the plugins named here, in the order given (default is alphabetical).
+    # :all can be used as a placeholder for all plugins not explicitly named.
+    # config.plugins = [ :exception_notification, :ssl_requirement, :all ]
+
+    # Activate observers that should always be running.
+    # config.active_record.observers = :cacher, :garbage_collector, :forum_observer
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+
+    # JavaScript files you want as :defaults (application.js is always included).
+    # config.action_view.javascript_expansions[:defaults] = %w(jquery rails)
+
+    # Configure the default encoding used in templates for Ruby 1.9.
+    config.encoding = "utf-8"
+
+    # Configure sensitive parameters which will be filtered from the log file.
+    config.filter_parameters += [:password]
+  end
+end

data/test/dummy/config/boot.rb

@@ -0,0 +1,10 @@
+require 'rubygems'
+gemfile = File.expand_path('../../../../Gemfile', __FILE__)
+
+if File.exist?(gemfile)
+  ENV['BUNDLE_GEMFILE'] = gemfile
+  require 'bundler'
+  Bundler.setup
+end
+
+$:.unshift File.expand_path('../../../../lib', __FILE__)

data/test/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the rails application
+require File.expand_path('../application', __FILE__)
+
+# Initialize the rails application
+Dummy::Application.initialize!

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,26 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # In the development environment your application's code is reloaded on
+  # every request.  This slows down response time but is perfect for development
+  # since you don't have to restart the webserver when you make code changes.
+  config.cache_classes = false
+
+  # Log error messages when you accidentally call methods on nil.
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_view.debug_rjs             = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger
+  config.active_support.deprecation = :log
+
+  # Only use best-standards-support built into browsers
+  config.action_dispatch.best_standards_support = :builtin
+end
+

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,49 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The production environment is meant for finished, "live" apps.
+  # Code is not reloaded between requests
+  config.cache_classes = true
+
+  # Full error reports are disabled and caching is turned on
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Specifies the header that your server uses for sending files
+  config.action_dispatch.x_sendfile_header = "X-Sendfile"
+
+  # For nginx:
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect'
+
+  # If you have no front-end server that supports something like X-Sendfile,
+  # just comment this out and Rails will serve the files
+
+  # See everything in the log (default is :info)
+  # config.log_level = :debug
+
+  # Use a different logger for distributed setups
+  # config.logger = SyslogLogger.new
+
+  # Use a different cache store in production
+  # config.cache_store = :mem_cache_store
+
+  # Disable Rails's static asset server
+  # In production, Apache or nginx will already do this
+  config.serve_static_assets = false
+
+  # Enable serving of images, stylesheets, and javascripts from an asset server
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Disable delivery errors, bad email addresses will be ignored
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable threaded mode
+  # config.threadsafe!
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found)
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners
+  config.active_support.deprecation = :notify
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,35 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The test environment is used exclusively to run your application's
+  # test suite.  You never need to work with it otherwise.  Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs.  Don't rely on the data there!
+  config.cache_classes = true
+
+  # Log error messages when you accidentally call methods on nil.
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment
+  config.action_controller.allow_forgery_protection    = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Use SQL instead of Active Record's schema dumper when creating the test database.
+  # This is necessary if your schema can't be completely dumped by the schema dumper,
+  # like if you have constraints or database-specific column types
+  # config.active_record.schema_format = :sql
+
+  # Print deprecation notices to the stderr
+  config.active_support.deprecation = :stderr
+end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/devise.rb

@@ -0,0 +1,142 @@
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in DeviseMailer.
+  config.mailer_sender = "please-change-me@config-initializers-devise.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating an user. By default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating an user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # config.authentication_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # config.http_authenticatable = false
+
+  # Set this to true to use Basic Auth for AJAX requests.  True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication
+  # config.http_authentication_realm = "Application"
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  config.stretches = 10
+
+  # Define which will be the encryption algorithm. Devise also supports encryptors
+  # from others authentication tools as :clearance_sha1, :authlogic_sha512 (then
+  # you should set stretches above to 20 for default behavior) and :restful_authentication_sha1
+  # (then you should set stretches to 10, and copy REST_AUTH_SITE_KEY to pepper)
+  config.encryptor = :bcrypt
+
+  # Setup a pepper to generate the encrypted password.
+  config.pepper = "96b67426edd83ec8973d123c8476776a44f105954b93167f6064af9a62e1039645d619e5dcc6d1c72c404bbb66c2725609bf7feb033b25b438cf413f07ecc770"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give your user to confirm his account. During this time
+  # he will be able to access your application without confirming. Default is nil.
+  # When confirm_within is zero, the user won't be able to sign in without confirming. 
+  # You can use this to let your user access some features of your application 
+  # without confirming the account, but blocking it after a certain period 
+  # (ie 2 days). 
+  # config.confirm_within = 2.days
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, a valid remember token can be re-used between multiple browsers.
+  # config.remember_across_browsers = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # ==> Configuration for :validatable
+  # Range for password length
+  # config.password_length = 6..20
+
+  # Regex to use to validate the email address
+  # config.email_regexp = /^([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})$/i
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again.
+  # config.timeout_in = 10.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes.
+  # config.default_scope = :user
+
+  # Configure sign_out behavior. 
+  # By default sign_out is scoped (i.e. /users/sign_out affects only :user scope).
+  # In case of sign_out_all_scopes set to true any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = false
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists. Default is [:html]
+  # config.navigational_formats = [:html, :iphone]
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not (yet) supported by Devise,
+  # you can configure them inside the config.warden block. The example below
+  # allows you to setup OAuth, using http://github.com/roman/warden_oauth
+  #
+  # config.warden do |manager|
+  #   manager.oauth(:twitter) do |twitter|
+  #     twitter.consumer_secret = <YOUR CONSUMER SECRET>
+  #     twitter.consumer_key  = <YOUR CONSUMER KEY>
+  #     twitter.options :site => 'http://twitter.com'
+  #   end
+  #   manager.default_strategies(:scope => :user).unshift :twitter_oauth
+  # end
+end