j1-template 2023.9.1 → 2023.10.0

data/assets/themes/j1/modules/rangeSlider/js/15.5.1/nouislider.js

@@ -1,2337 +0,0 @@
-/*!
- * Materialize 1.0.0 (http://materializecss.com)
- * Copyright 2014-2015 Materialize
- * MIT License (https://raw.githubusercontent.com/Dogfalo/materialize/master/LICENSE)
- */
-
-// wNumb
-(function() {
-    function r(b) {
-        return b.split("").reverse().join("")
-    }
-    function s(b, f, c) {
-        if ((b[f] || b[c]) && b[f] === b[c])
-            throw Error(f);
-    }
-    function v(b, f, c, d, e, p, q, k, l, h, n, a) {
-        q = a;
-        var m, g = n = "";
-        p && (a = p(a));
-        if ("number" !== typeof a || !isFinite(a))
-            return !1;
-        b && 0 === parseFloat(a.toFixed(b)) && (a = 0);
-        0 > a && (m = !0,
-        a = Math.abs(a));
-        b && (p = Math.pow(10, b),
-        a = (Math.round(a * p) / p).toFixed(b));
-        a = a.toString();
-        -1 !== a.indexOf(".") && (b = a.split("."),
-        a = b[0],
-        c && (n = c + b[1]));
-        f && (a = r(a).match(/.{1,3}/g),
-        a = r(a.join(r(f))));
-        m && k && (g += k);
-        d && (g += d);
-        m && l && (g += l);
-        g = g + a + n;
-        e && (g += e);
-        h && (g = h(g, q));
-        return g
-    }
-    function w(b, f, c, d, e, h, q, k, l, r, n, a) {
-        var m;
-        b = "";
-        n && (a = n(a));
-        if (!a || "string" !== typeof a)
-            return !1;
-        k && a.substring(0, k.length) === k && (a = a.replace(k, ""),
-        m = !0);
-        d && a.substring(0, d.length) === d && (a = a.replace(d, ""));
-        l && a.substring(0, l.length) === l && (a = a.replace(l, ""),
-        m = !0);
-        e && a.slice(-1 * e.length) === e && (a = a.slice(0, -1 * e.length));
-        f && (a = a.split(f).join(""));
-        c && (a = a.replace(c, "."));
-        m && (b += "-");
-        b = Number((b + a).replace(/[^0-9\.\-.]/g, ""));
-        q && (b = q(b));
-        return "number" === typeof b && isFinite(b) ? b : !1
-    }
-    function x(b) {
-        var f, c, d, e = {};
-        for (f = 0; f < h.length; f += 1)
-            c = h[f],
-            d = b[c],
-            void 0 === d ? e[c] = "negative" !== c || e.negativeBefore ? "mark" === c && "." !== e.thousand ? "." : !1 : "-" : "decimals" === c ? 0 < d && 8 > d && (e[c] = d) : "encoder" === c || "decoder" === c || "edit" === c || "undo" === c ? "function" === typeof d && (e[c] = d) : "string" === typeof d && (e[c] = d);
-        s(e, "mark", "thousand");
-        s(e, "prefix", "negative");
-        s(e, "prefix", "negativeBefore");
-        return e
-    }
-    function u(b, f, c) {
-        var d, e = [];
-        for (d = 0; d < h.length; d += 1)
-            e.push(b[h[d]]);
-        e.push(c);
-        return f.apply("", e)
-    }
-    function t(b) {
-        if (!(this instanceof t))
-            return new t(b);
-        "object" === typeof b && (b = x(b),
-        this.to = function(f) {
-            return u(b, v, f)
-        }
-        ,
-        this.from = function(f) {
-            return u(b, w, f)
-        }
-        )
-    }
-    var h = "decimals thousand mark prefix postfix encoder decoder negativeBefore negative edit undo".split(" ");
-    window.wNumb = t
-}
-)();
-
-/*! nouislider - 9.1.0 - 2016-12-10 16:00:32 */
-
-(function (global, factory) {
-    typeof exports === 'object' && typeof module !== 'undefined' ? factory(exports) :
-    typeof define === 'function' && define.amd ? define(['exports'], factory) :
-    (global = typeof globalThis !== 'undefined' ? globalThis : global || self, factory(global.noUiSlider = {}));
-})(this, (function (exports) { 'use strict';
-
-    exports.PipsMode = void 0;
-    (function (PipsMode) {
-        PipsMode["Range"] = "range";
-        PipsMode["Steps"] = "steps";
-        PipsMode["Positions"] = "positions";
-        PipsMode["Count"] = "count";
-        PipsMode["Values"] = "values";
-    })(exports.PipsMode || (exports.PipsMode = {}));
-    exports.PipsType = void 0;
-    (function (PipsType) {
-        PipsType[PipsType["None"] = -1] = "None";
-        PipsType[PipsType["NoValue"] = 0] = "NoValue";
-        PipsType[PipsType["LargeValue"] = 1] = "LargeValue";
-        PipsType[PipsType["SmallValue"] = 2] = "SmallValue";
-    })(exports.PipsType || (exports.PipsType = {}));
-    //region Helper Methods
-    function isValidFormatter(entry) {
-        return isValidPartialFormatter(entry) && typeof entry.from === "function";
-    }
-    function isValidPartialFormatter(entry) {
-        // partial formatters only need a to function and not a from function
-        return typeof entry === "object" && typeof entry.to === "function";
-    }
-    function removeElement(el) {
-        el.parentElement.removeChild(el);
-    }
-    function isSet(value) {
-        return value !== null && value !== undefined;
-    }
-    // Bindable version
-    function preventDefault(e) {
-        e.preventDefault();
-    }
-    // Removes duplicates from an array.
-    function unique(array) {
-        return array.filter(function (a) {
-            return !this[a] ? (this[a] = true) : false;
-        }, {});
-    }
-    // Round a value to the closest 'to'.
-    function closest(value, to) {
-        return Math.round(value / to) * to;
-    }
-    // Current position of an element relative to the document.
-    function offset(elem, orientation) {
-        var rect = elem.getBoundingClientRect();
-        var doc = elem.ownerDocument;
-        var docElem = doc.documentElement;
-        var pageOffset = getPageOffset(doc);
-        // getBoundingClientRect contains left scroll in Chrome on Android.
-        // I haven't found a feature detection that proves this. Worst case
-        // scenario on mis-match: the 'tap' feature on horizontal sliders breaks.
-        if (/webkit.*Chrome.*Mobile/i.test(navigator.userAgent)) {
-            pageOffset.x = 0;
-        }
-        return orientation ? rect.top + pageOffset.y - docElem.clientTop : rect.left + pageOffset.x - docElem.clientLeft;
-    }
-    // Checks whether a value is numerical.
-    function isNumeric(a) {
-        return typeof a === "number" && !isNaN(a) && isFinite(a);
-    }
-    // Sets a class and removes it after [duration] ms.
-    function addClassFor(element, className, duration) {
-        if (duration > 0) {
-            addClass(element, className);
-            setTimeout(function () {
-                removeClass(element, className);
-            }, duration);
-        }
-    }
-    // Limits a value to 0 - 100
-    function limit(a) {
-        return Math.max(Math.min(a, 100), 0);
-    }
-    // Wraps a variable as an array, if it isn't one yet.
-    // Note that an input array is returned by reference!
-    function asArray(a) {
-        return Array.isArray(a) ? a : [a];
-    }
-    // Counts decimals
-    function countDecimals(numStr) {
-        numStr = String(numStr);
-        var pieces = numStr.split(".");
-        return pieces.length > 1 ? pieces[1].length : 0;
-    }
-    // http://youmightnotneedjquery.com/#add_class
-    function addClass(el, className) {
-        if (el.classList && !/\s/.test(className)) {
-            el.classList.add(className);
-        }
-        else {
-            el.className += " " + className;
-        }
-    }
-    // http://youmightnotneedjquery.com/#remove_class
-    function removeClass(el, className) {
-        if (el.classList && !/\s/.test(className)) {
-            el.classList.remove(className);
-        }
-        else {
-            el.className = el.className.replace(new RegExp("(^|\\b)" + className.split(" ").join("|") + "(\\b|$)", "gi"), " ");
-        }
-    }
-    // https://plainjs.com/javascript/attributes/adding-removing-and-testing-for-classes-9/
-    function hasClass(el, className) {
-        return el.classList ? el.classList.contains(className) : new RegExp("\\b" + className + "\\b").test(el.className);
-    }
-    // https://developer.mozilla.org/en-US/docs/Web/API/Window/scrollY#Notes
-    function getPageOffset(doc) {
-        var supportPageOffset = window.pageXOffset !== undefined;
-        var isCSS1Compat = (doc.compatMode || "") === "CSS1Compat";
-        var x = supportPageOffset
-            ? window.pageXOffset
-            : isCSS1Compat
-                ? doc.documentElement.scrollLeft
-                : doc.body.scrollLeft;
-        var y = supportPageOffset
-            ? window.pageYOffset
-            : isCSS1Compat
-                ? doc.documentElement.scrollTop
-                : doc.body.scrollTop;
-        return {
-            x: x,
-            y: y,
-        };
-    }
-    // we provide a function to compute constants instead
-    // of accessing window.* as soon as the module needs it
-    // so that we do not compute anything if not needed
-    function getActions() {
-        // Determine the events to bind. IE11 implements pointerEvents without
-        // a prefix, which breaks compatibility with the IE10 implementation.
-        return window.navigator.pointerEnabled
-            ? {
-                start: "pointerdown",
-                move: "pointermove",
-                end: "pointerup",
-            }
-            : window.navigator.msPointerEnabled
-                ? {
-                    start: "MSPointerDown",
-                    move: "MSPointerMove",
-                    end: "MSPointerUp",
-                }
-                : {
-                    start: "mousedown touchstart",
-                    move: "mousemove touchmove",
-                    end: "mouseup touchend",
-                };
-    }
-    // https://github.com/WICG/EventListenerOptions/blob/gh-pages/explainer.md
-    // Issue #785
-    function getSupportsPassive() {
-        var supportsPassive = false;
-        /* eslint-disable */
-        try {
-            var opts = Object.defineProperty({}, "passive", {
-                get: function () {
-                    supportsPassive = true;
-                },
-            });
-            // @ts-ignore
-            window.addEventListener("test", null, opts);
-        }
-        catch (e) { }
-        /* eslint-enable */
-        return supportsPassive;
-    }
-    function getSupportsTouchActionNone() {
-        return window.CSS && CSS.supports && CSS.supports("touch-action", "none");
-    }
-    //endregion
-    //region Range Calculation
-    // Determine the size of a sub-range in relation to a full range.
-    function subRangeRatio(pa, pb) {
-        return 100 / (pb - pa);
-    }
-    // (percentage) How many percent is this value of this range?
-    function fromPercentage(range, value, startRange) {
-        return (value * 100) / (range[startRange + 1] - range[startRange]);
-    }
-    // (percentage) Where is this value on this range?
-    function toPercentage(range, value) {
-        return fromPercentage(range, range[0] < 0 ? value + Math.abs(range[0]) : value - range[0], 0);
-    }
-    // (value) How much is this percentage on this range?
-    function isPercentage(range, value) {
-        return (value * (range[1] - range[0])) / 100 + range[0];
-    }
-    function getJ(value, arr) {
-        var j = 1;
-        while (value >= arr[j]) {
-            j += 1;
-        }
-        return j;
-    }
-    // (percentage) Input a value, find where, on a scale of 0-100, it applies.
-    function toStepping(xVal, xPct, value) {
-        if (value >= xVal.slice(-1)[0]) {
-            return 100;
-        }
-        var j = getJ(value, xVal);
-        var va = xVal[j - 1];
-        var vb = xVal[j];
-        var pa = xPct[j - 1];
-        var pb = xPct[j];
-        return pa + toPercentage([va, vb], value) / subRangeRatio(pa, pb);
-    }
-    // (value) Input a percentage, find where it is on the specified range.
-    function fromStepping(xVal, xPct, value) {
-        // There is no range group that fits 100
-        if (value >= 100) {
-            return xVal.slice(-1)[0];
-        }
-        var j = getJ(value, xPct);
-        var va = xVal[j - 1];
-        var vb = xVal[j];
-        var pa = xPct[j - 1];
-        var pb = xPct[j];
-        return isPercentage([va, vb], (value - pa) * subRangeRatio(pa, pb));
-    }
-    // (percentage) Get the step that applies at a certain value.
-    function getStep(xPct, xSteps, snap, value) {
-        if (value === 100) {
-            return value;
-        }
-        var j = getJ(value, xPct);
-        var a = xPct[j - 1];
-        var b = xPct[j];
-        // If 'snap' is set, steps are used as fixed points on the slider.
-        if (snap) {
-            // Find the closest position, a or b.
-            if (value - a > (b - a) / 2) {
-                return b;
-            }
-            return a;
-        }
-        if (!xSteps[j - 1]) {
-            return value;
-        }
-        return xPct[j - 1] + closest(value - xPct[j - 1], xSteps[j - 1]);
-    }
-    //endregion
-    //region Spectrum
-    var Spectrum = /** @class */ (function () {
-        function Spectrum(entry, snap, singleStep) {
-            this.xPct = [];
-            this.xVal = [];
-            this.xSteps = [];
-            this.xNumSteps = [];
-            this.xHighestCompleteStep = [];
-            this.xSteps = [singleStep || false];
-            this.xNumSteps = [false];
-            this.snap = snap;
-            var index;
-            var ordered = [];
-            // Map the object keys to an array.
-            Object.keys(entry).forEach(function (index) {
-                ordered.push([asArray(entry[index]), index]);
-            });
-            // Sort all entries by value (numeric sort).
-            ordered.sort(function (a, b) {
-                return a[0][0] - b[0][0];
-            });
-            // Convert all entries to subranges.
-            for (index = 0; index < ordered.length; index++) {
-                this.handleEntryPoint(ordered[index][1], ordered[index][0]);
-            }
-            // Store the actual step values.
-            // xSteps is sorted in the same order as xPct and xVal.
-            this.xNumSteps = this.xSteps.slice(0);
-            // Convert all numeric steps to the percentage of the subrange they represent.
-            for (index = 0; index < this.xNumSteps.length; index++) {
-                this.handleStepPoint(index, this.xNumSteps[index]);
-            }
-        }
-        Spectrum.prototype.getDistance = function (value) {
-            var distances = [];
-            for (var index = 0; index < this.xNumSteps.length - 1; index++) {
-                distances[index] = fromPercentage(this.xVal, value, index);
-            }
-            return distances;
-        };
-        // Calculate the percentual distance over the whole scale of ranges.
-        // direction: 0 = backwards / 1 = forwards
-        Spectrum.prototype.getAbsoluteDistance = function (value, distances, direction) {
-            var xPct_index = 0;
-            // Calculate range where to start calculation
-            if (value < this.xPct[this.xPct.length - 1]) {
-                while (value > this.xPct[xPct_index + 1]) {
-                    xPct_index++;
-                }
-            }
-            else if (value === this.xPct[this.xPct.length - 1]) {
-                xPct_index = this.xPct.length - 2;
-            }
-            // If looking backwards and the value is exactly at a range separator then look one range further
-            if (!direction && value === this.xPct[xPct_index + 1]) {
-                xPct_index++;
-            }
-            if (distances === null) {
-                distances = [];
-            }
-            var start_factor;
-            var rest_factor = 1;
-            var rest_rel_distance = distances[xPct_index];
-            var range_pct = 0;
-            var rel_range_distance = 0;
-            var abs_distance_counter = 0;
-            var range_counter = 0;
-            // Calculate what part of the start range the value is
-            if (direction) {
-                start_factor = (value - this.xPct[xPct_index]) / (this.xPct[xPct_index + 1] - this.xPct[xPct_index]);
-            }
-            else {
-                start_factor = (this.xPct[xPct_index + 1] - value) / (this.xPct[xPct_index + 1] - this.xPct[xPct_index]);
-            }
-            // Do until the complete distance across ranges is calculated
-            while (rest_rel_distance > 0) {
-                // Calculate the percentage of total range
-                range_pct = this.xPct[xPct_index + 1 + range_counter] - this.xPct[xPct_index + range_counter];
-                // Detect if the margin, padding or limit is larger then the current range and calculate
-                if (distances[xPct_index + range_counter] * rest_factor + 100 - start_factor * 100 > 100) {
-                    // If larger then take the percentual distance of the whole range
-                    rel_range_distance = range_pct * start_factor;
-                    // Rest factor of relative percentual distance still to be calculated
-                    rest_factor = (rest_rel_distance - 100 * start_factor) / distances[xPct_index + range_counter];
-                    // Set start factor to 1 as for next range it does not apply.
-                    start_factor = 1;
-                }
-                else {
-                    // If smaller or equal then take the percentual distance of the calculate percentual part of that range
-                    rel_range_distance = ((distances[xPct_index + range_counter] * range_pct) / 100) * rest_factor;
-                    // No rest left as the rest fits in current range
-                    rest_factor = 0;
-                }
-                if (direction) {
-                    abs_distance_counter = abs_distance_counter - rel_range_distance;
-                    // Limit range to first range when distance becomes outside of minimum range
-                    if (this.xPct.length + range_counter >= 1) {
-                        range_counter--;
-                    }
-                }
-                else {
-                    abs_distance_counter = abs_distance_counter + rel_range_distance;
-                    // Limit range to last range when distance becomes outside of maximum range
-                    if (this.xPct.length - range_counter >= 1) {
-                        range_counter++;
-                    }
-                }
-                // Rest of relative percentual distance still to be calculated
-                rest_rel_distance = distances[xPct_index + range_counter] * rest_factor;
-            }
-            return value + abs_distance_counter;
-        };
-        Spectrum.prototype.toStepping = function (value) {
-            value = toStepping(this.xVal, this.xPct, value);
-            return value;
-        };
-        Spectrum.prototype.fromStepping = function (value) {
-            return fromStepping(this.xVal, this.xPct, value);
-        };
-        Spectrum.prototype.getStep = function (value) {
-            value = getStep(this.xPct, this.xSteps, this.snap, value);
-            return value;
-        };
-        Spectrum.prototype.getDefaultStep = function (value, isDown, size) {
-            var j = getJ(value, this.xPct);
-            // When at the top or stepping down, look at the previous sub-range
-            if (value === 100 || (isDown && value === this.xPct[j - 1])) {
-                j = Math.max(j - 1, 1);
-            }
-            return (this.xVal[j] - this.xVal[j - 1]) / size;
-        };
-        Spectrum.prototype.getNearbySteps = function (value) {
-            var j = getJ(value, this.xPct);
-            return {
-                stepBefore: {
-                    startValue: this.xVal[j - 2],
-                    step: this.xNumSteps[j - 2],
-                    highestStep: this.xHighestCompleteStep[j - 2],
-                },
-                thisStep: {
-                    startValue: this.xVal[j - 1],
-                    step: this.xNumSteps[j - 1],
-                    highestStep: this.xHighestCompleteStep[j - 1],
-                },
-                stepAfter: {
-                    startValue: this.xVal[j],
-                    step: this.xNumSteps[j],
-                    highestStep: this.xHighestCompleteStep[j],
-                },
-            };
-        };
-        Spectrum.prototype.countStepDecimals = function () {
-            var stepDecimals = this.xNumSteps.map(countDecimals);
-            return Math.max.apply(null, stepDecimals);
-        };
-        Spectrum.prototype.hasNoSize = function () {
-            return this.xVal[0] === this.xVal[this.xVal.length - 1];
-        };
-        // Outside testing
-        Spectrum.prototype.convert = function (value) {
-            return this.getStep(this.toStepping(value));
-        };
-        Spectrum.prototype.handleEntryPoint = function (index, value) {
-            var percentage;
-            // Covert min/max syntax to 0 and 100.
-            if (index === "min") {
-                percentage = 0;
-            }
-            else if (index === "max") {
-                percentage = 100;
-            }
-            else {
-                percentage = parseFloat(index);
-            }
-            // Check for correct input.
-            if (!isNumeric(percentage) || !isNumeric(value[0])) {
-                throw new Error("noUiSlider: 'range' value isn't numeric.");
-            }
-            // Store values.
-            this.xPct.push(percentage);
-            this.xVal.push(value[0]);
-            var value1 = Number(value[1]);
-            // NaN will evaluate to false too, but to keep
-            // logging clear, set step explicitly. Make sure
-            // not to override the 'step' setting with false.
-            if (!percentage) {
-                if (!isNaN(value1)) {
-                    this.xSteps[0] = value1;
-                }
-            }
-            else {
-                this.xSteps.push(isNaN(value1) ? false : value1);
-            }
-            this.xHighestCompleteStep.push(0);
-        };
-        Spectrum.prototype.handleStepPoint = function (i, n) {
-            // Ignore 'false' stepping.
-            if (!n) {
-                return;
-            }
-            // Step over zero-length ranges (#948);
-            if (this.xVal[i] === this.xVal[i + 1]) {
-                this.xSteps[i] = this.xHighestCompleteStep[i] = this.xVal[i];
-                return;
-            }
-            // Factor to range ratio
-            this.xSteps[i] =
-                fromPercentage([this.xVal[i], this.xVal[i + 1]], n, 0) / subRangeRatio(this.xPct[i], this.xPct[i + 1]);
-            var totalSteps = (this.xVal[i + 1] - this.xVal[i]) / this.xNumSteps[i];
-            var highestStep = Math.ceil(Number(totalSteps.toFixed(3)) - 1);
-            var step = this.xVal[i] + this.xNumSteps[i] * highestStep;
-            this.xHighestCompleteStep[i] = step;
-        };
-        return Spectrum;
-    }());
-    //endregion
-    //region Options
-    /*	Every input option is tested and parsed. This will prevent
-        endless validation in internal methods. These tests are
-        structured with an item for every option available. An
-        option can be marked as required by setting the 'r' flag.
-        The testing function is provided with three arguments:
-            - The provided value for the option;
-            - A reference to the options object;
-            - The name for the option;
-
-        The testing function returns false when an error is detected,
-        or true when everything is OK. It can also modify the option
-        object, to make sure all values can be correctly looped elsewhere. */
-    //region Defaults
-    var defaultFormatter = {
-        to: function (value) {
-            return value === undefined ? "" : value.toFixed(2);
-        },
-        from: Number,
-    };
-    var cssClasses = {
-        target: "target",
-        base: "base",
-        origin: "origin",
-        handle: "handle",
-        handleLower: "handle-lower",
-        handleUpper: "handle-upper",
-        touchArea: "touch-area",
-        horizontal: "horizontal",
-        vertical: "vertical",
-        background: "background",
-        connect: "connect",
-        connects: "connects",
-        ltr: "ltr",
-        rtl: "rtl",
-        textDirectionLtr: "txt-dir-ltr",
-        textDirectionRtl: "txt-dir-rtl",
-        draggable: "draggable",
-        drag: "state-drag",
-        tap: "state-tap",
-        active: "active",
-        tooltip: "tooltip",
-        pips: "pips",
-        pipsHorizontal: "pips-horizontal",
-        pipsVertical: "pips-vertical",
-        marker: "marker",
-        markerHorizontal: "marker-horizontal",
-        markerVertical: "marker-vertical",
-        markerNormal: "marker-normal",
-        markerLarge: "marker-large",
-        markerSub: "marker-sub",
-        value: "value",
-        valueHorizontal: "value-horizontal",
-        valueVertical: "value-vertical",
-        valueNormal: "value-normal",
-        valueLarge: "value-large",
-        valueSub: "value-sub",
-    };
-    // Namespaces of internal event listeners
-    var INTERNAL_EVENT_NS = {
-        tooltips: ".__tooltips",
-        aria: ".__aria",
-    };
-    //endregion
-    function testStep(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'step' is not numeric.");
-        }
-        // The step option can still be used to set stepping
-        // for linear sliders. Overwritten if set in 'range'.
-        parsed.singleStep = entry;
-    }
-    function testKeyboardPageMultiplier(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'keyboardPageMultiplier' is not numeric.");
-        }
-        parsed.keyboardPageMultiplier = entry;
-    }
-    function testKeyboardMultiplier(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'keyboardMultiplier' is not numeric.");
-        }
-        parsed.keyboardMultiplier = entry;
-    }
-    function testKeyboardDefaultStep(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'keyboardDefaultStep' is not numeric.");
-        }
-        parsed.keyboardDefaultStep = entry;
-    }
-    function testRange(parsed, entry) {
-        // Filter incorrect input.
-        if (typeof entry !== "object" || Array.isArray(entry)) {
-            throw new Error("noUiSlider: 'range' is not an object.");
-        }
-        // Catch missing start or end.
-        if (entry.min === undefined || entry.max === undefined) {
-            throw new Error("noUiSlider: Missing 'min' or 'max' in 'range'.");
-        }
-        parsed.spectrum = new Spectrum(entry, parsed.snap || false, parsed.singleStep);
-    }
-    function testStart(parsed, entry) {
-        entry = asArray(entry);
-        // Validate input. Values aren't tested, as the public .val method
-        // will always provide a valid location.
-        if (!Array.isArray(entry) || !entry.length) {
-            throw new Error("noUiSlider: 'start' option is incorrect.");
-        }
-        // Store the number of handles.
-        parsed.handles = entry.length;
-        // When the slider is initialized, the .val method will
-        // be called with the start options.
-        parsed.start = entry;
-    }
-    function testSnap(parsed, entry) {
-        if (typeof entry !== "boolean") {
-            throw new Error("noUiSlider: 'snap' option must be a boolean.");
-        }
-        // Enforce 100% stepping within subranges.
-        parsed.snap = entry;
-    }
-    function testAnimate(parsed, entry) {
-        if (typeof entry !== "boolean") {
-            throw new Error("noUiSlider: 'animate' option must be a boolean.");
-        }
-        // Enforce 100% stepping within subranges.
-        parsed.animate = entry;
-    }
-    function testAnimationDuration(parsed, entry) {
-        if (typeof entry !== "number") {
-            throw new Error("noUiSlider: 'animationDuration' option must be a number.");
-        }
-        parsed.animationDuration = entry;
-    }
-    function testConnect(parsed, entry) {
-        var connect = [false];
-        var i;
-        // Map legacy options
-        if (entry === "lower") {
-            entry = [true, false];
-        }
-        else if (entry === "upper") {
-            entry = [false, true];
-        }
-        // Handle boolean options
-        if (entry === true || entry === false) {
-            for (i = 1; i < parsed.handles; i++) {
-                connect.push(entry);
-            }
-            connect.push(false);
-        }
-        // Reject invalid input
-        else if (!Array.isArray(entry) || !entry.length || entry.length !== parsed.handles + 1) {
-            throw new Error("noUiSlider: 'connect' option doesn't match handle count.");
-        }
-        else {
-            connect = entry;
-        }
-        parsed.connect = connect;
-    }
-    function testOrientation(parsed, entry) {
-        // Set orientation to an a numerical value for easy
-        // array selection.
-        switch (entry) {
-            case "horizontal":
-                parsed.ort = 0;
-                break;
-            case "vertical":
-                parsed.ort = 1;
-                break;
-            default:
-                throw new Error("noUiSlider: 'orientation' option is invalid.");
-        }
-    }
-    function testMargin(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'margin' option must be numeric.");
-        }
-        // Issue #582
-        if (entry === 0) {
-            return;
-        }
-        parsed.margin = parsed.spectrum.getDistance(entry);
-    }
-    function testLimit(parsed, entry) {
-        if (!isNumeric(entry)) {
-            throw new Error("noUiSlider: 'limit' option must be numeric.");
-        }
-        parsed.limit = parsed.spectrum.getDistance(entry);
-        if (!parsed.limit || parsed.handles < 2) {
-            throw new Error("noUiSlider: 'limit' option is only supported on linear sliders with 2 or more handles.");
-        }
-    }
-    function testPadding(parsed, entry) {
-        var index;
-        if (!isNumeric(entry) && !Array.isArray(entry)) {
-            throw new Error("noUiSlider: 'padding' option must be numeric or array of exactly 2 numbers.");
-        }
-        if (Array.isArray(entry) && !(entry.length === 2 || isNumeric(entry[0]) || isNumeric(entry[1]))) {
-            throw new Error("noUiSlider: 'padding' option must be numeric or array of exactly 2 numbers.");
-        }
-        if (entry === 0) {
-            return;
-        }
-        if (!Array.isArray(entry)) {
-            entry = [entry, entry];
-        }
-        // 'getDistance' returns false for invalid values.
-        parsed.padding = [parsed.spectrum.getDistance(entry[0]), parsed.spectrum.getDistance(entry[1])];
-        for (index = 0; index < parsed.spectrum.xNumSteps.length - 1; index++) {
-            // last "range" can't contain step size as it is purely an endpoint.
-            if (parsed.padding[0][index] < 0 || parsed.padding[1][index] < 0) {
-                throw new Error("noUiSlider: 'padding' option must be a positive number(s).");
-            }
-        }
-        var totalPadding = entry[0] + entry[1];
-        var firstValue = parsed.spectrum.xVal[0];
-        var lastValue = parsed.spectrum.xVal[parsed.spectrum.xVal.length - 1];
-        if (totalPadding / (lastValue - firstValue) > 1) {
-            throw new Error("noUiSlider: 'padding' option must not exceed 100% of the range.");
-        }
-    }
-    function testDirection(parsed, entry) {
-        // Set direction as a numerical value for easy parsing.
-        // Invert connection for RTL sliders, so that the proper
-        // handles get the connect/background classes.
-        switch (entry) {
-            case "ltr":
-                parsed.dir = 0;
-                break;
-            case "rtl":
-                parsed.dir = 1;
-                break;
-            default:
-                throw new Error("noUiSlider: 'direction' option was not recognized.");
-        }
-    }
-    function testBehaviour(parsed, entry) {
-        // Make sure the input is a string.
-        if (typeof entry !== "string") {
-            throw new Error("noUiSlider: 'behaviour' must be a string containing options.");
-        }
-        // Check if the string contains any keywords.
-        // None are required.
-        var tap = entry.indexOf("tap") >= 0;
-        var drag = entry.indexOf("drag") >= 0;
-        var fixed = entry.indexOf("fixed") >= 0;
-        var snap = entry.indexOf("snap") >= 0;
-        var hover = entry.indexOf("hover") >= 0;
-        var unconstrained = entry.indexOf("unconstrained") >= 0;
-        var dragAll = entry.indexOf("drag-all") >= 0;
-        if (fixed) {
-            if (parsed.handles !== 2) {
-                throw new Error("noUiSlider: 'fixed' behaviour must be used with 2 handles");
-            }
-            // Use margin to enforce fixed state
-            testMargin(parsed, parsed.start[1] - parsed.start[0]);
-        }
-        if (unconstrained && (parsed.margin || parsed.limit)) {
-            throw new Error("noUiSlider: 'unconstrained' behaviour cannot be used with margin or limit");
-        }
-        parsed.events = {
-            tap: tap || snap,
-            drag: drag,
-            dragAll: dragAll,
-            fixed: fixed,
-            snap: snap,
-            hover: hover,
-            unconstrained: unconstrained,
-        };
-    }
-    function testTooltips(parsed, entry) {
-        if (entry === false) {
-            return;
-        }
-        if (entry === true || isValidPartialFormatter(entry)) {
-            parsed.tooltips = [];
-            for (var i = 0; i < parsed.handles; i++) {
-                parsed.tooltips.push(entry);
-            }
-        }
-        else {
-            entry = asArray(entry);
-            if (entry.length !== parsed.handles) {
-                throw new Error("noUiSlider: must pass a formatter for all handles.");
-            }
-            entry.forEach(function (formatter) {
-                if (typeof formatter !== "boolean" && !isValidPartialFormatter(formatter)) {
-                    throw new Error("noUiSlider: 'tooltips' must be passed a formatter or 'false'.");
-                }
-            });
-            parsed.tooltips = entry;
-        }
-    }
-    function testHandleAttributes(parsed, entry) {
-        if (entry.length !== parsed.handles) {
-            throw new Error("noUiSlider: must pass a attributes for all handles.");
-        }
-        parsed.handleAttributes = entry;
-    }
-    function testAriaFormat(parsed, entry) {
-        if (!isValidPartialFormatter(entry)) {
-            throw new Error("noUiSlider: 'ariaFormat' requires 'to' method.");
-        }
-        parsed.ariaFormat = entry;
-    }
-    function testFormat(parsed, entry) {
-        if (!isValidFormatter(entry)) {
-            throw new Error("noUiSlider: 'format' requires 'to' and 'from' methods.");
-        }
-        parsed.format = entry;
-    }
-    function testKeyboardSupport(parsed, entry) {
-        if (typeof entry !== "boolean") {
-            throw new Error("noUiSlider: 'keyboardSupport' option must be a boolean.");
-        }
-        parsed.keyboardSupport = entry;
-    }
-    function testDocumentElement(parsed, entry) {
-        // This is an advanced option. Passed values are used without validation.
-        parsed.documentElement = entry;
-    }
-    function testCssPrefix(parsed, entry) {
-        if (typeof entry !== "string" && entry !== false) {
-            throw new Error("noUiSlider: 'cssPrefix' must be a string or `false`.");
-        }
-        parsed.cssPrefix = entry;
-    }
-    function testCssClasses(parsed, entry) {
-        if (typeof entry !== "object") {
-            throw new Error("noUiSlider: 'cssClasses' must be an object.");
-        }
-        if (typeof parsed.cssPrefix === "string") {
-            parsed.cssClasses = {};
-            Object.keys(entry).forEach(function (key) {
-                parsed.cssClasses[key] = parsed.cssPrefix + entry[key];
-            });
-        }
-        else {
-            parsed.cssClasses = entry;
-        }
-    }
-    // Test all developer settings and parse to assumption-safe values.
-    function testOptions(options) {
-        // To prove a fix for #537, freeze options here.
-        // If the object is modified, an error will be thrown.
-        // Object.freeze(options);
-        var parsed = {
-            margin: null,
-            limit: null,
-            padding: null,
-            animate: true,
-            animationDuration: 300,
-            ariaFormat: defaultFormatter,
-            format: defaultFormatter,
-        };
-        // Tests are executed in the order they are presented here.
-        var tests = {
-            step: { r: false, t: testStep },
-            keyboardPageMultiplier: { r: false, t: testKeyboardPageMultiplier },
-            keyboardMultiplier: { r: false, t: testKeyboardMultiplier },
-            keyboardDefaultStep: { r: false, t: testKeyboardDefaultStep },
-            start: { r: true, t: testStart },
-            connect: { r: true, t: testConnect },
-            direction: { r: true, t: testDirection },
-            snap: { r: false, t: testSnap },
-            animate: { r: false, t: testAnimate },
-            animationDuration: { r: false, t: testAnimationDuration },
-            range: { r: true, t: testRange },
-            orientation: { r: false, t: testOrientation },
-            margin: { r: false, t: testMargin },
-            limit: { r: false, t: testLimit },
-            padding: { r: false, t: testPadding },
-            behaviour: { r: true, t: testBehaviour },
-            ariaFormat: { r: false, t: testAriaFormat },
-            format: { r: false, t: testFormat },
-            tooltips: { r: false, t: testTooltips },
-            keyboardSupport: { r: true, t: testKeyboardSupport },
-            documentElement: { r: false, t: testDocumentElement },
-            cssPrefix: { r: true, t: testCssPrefix },
-            cssClasses: { r: true, t: testCssClasses },
-            handleAttributes: { r: false, t: testHandleAttributes },
-        };
-        var defaults = {
-            connect: false,
-            direction: "ltr",
-            behaviour: "tap",
-            orientation: "horizontal",
-            keyboardSupport: true,
-            cssPrefix: "noUi-",
-            cssClasses: cssClasses,
-            keyboardPageMultiplier: 5,
-            keyboardMultiplier: 1,
-            keyboardDefaultStep: 10,
-        };
-        // AriaFormat defaults to regular format, if any.
-        if (options.format && !options.ariaFormat) {
-            options.ariaFormat = options.format;
-        }
-        // Run all options through a testing mechanism to ensure correct
-        // input. It should be noted that options might get modified to
-        // be handled properly. E.g. wrapping integers in arrays.
-        Object.keys(tests).forEach(function (name) {
-            // If the option isn't set, but it is required, throw an error.
-            if (!isSet(options[name]) && defaults[name] === undefined) {
-                if (tests[name].r) {
-                    throw new Error("noUiSlider: '" + name + "' is required.");
-                }
-                return;
-            }
-            tests[name].t(parsed, !isSet(options[name]) ? defaults[name] : options[name]);
-        });
-        // Forward pips options
-        parsed.pips = options.pips;
-        // All recent browsers accept unprefixed transform.
-        // We need -ms- for IE9 and -webkit- for older Android;
-        // Assume use of -webkit- if unprefixed and -ms- are not supported.
-        // https://caniuse.com/#feat=transforms2d
-        var d = document.createElement("div");
-        var msPrefix = d.style.msTransform !== undefined;
-        var noPrefix = d.style.transform !== undefined;
-        parsed.transformRule = noPrefix ? "transform" : msPrefix ? "msTransform" : "webkitTransform";
-        // Pips don't move, so we can place them using left/top.
-        var styles = [
-            ["left", "top"],
-            ["right", "bottom"],
-        ];
-        parsed.style = styles[parsed.dir][parsed.ort];
-        return parsed;
-    }
-    //endregion
-    function scope(target, options, originalOptions) {
-        var actions = getActions();
-        var supportsTouchActionNone = getSupportsTouchActionNone();
-        var supportsPassive = supportsTouchActionNone && getSupportsPassive();
-        // All variables local to 'scope' are prefixed with 'scope_'
-        // Slider DOM Nodes
-        var scope_Target = target;
-        var scope_Base;
-        var scope_Handles;
-        var scope_Connects;
-        var scope_Pips;
-        var scope_Tooltips;
-        // Slider state values
-        var scope_Spectrum = options.spectrum;
-        var scope_Values = [];
-        var scope_Locations = [];
-        var scope_HandleNumbers = [];
-        var scope_ActiveHandlesCount = 0;
-        var scope_Events = {};
-        // Document Nodes
-        var scope_Document = target.ownerDocument;
-        var scope_DocumentElement = options.documentElement || scope_Document.documentElement;
-        var scope_Body = scope_Document.body;
-        // For horizontal sliders in standard ltr documents,
-        // make .noUi-origin overflow to the left so the document doesn't scroll.
-        var scope_DirOffset = scope_Document.dir === "rtl" || options.ort === 1 ? 0 : 100;
-        // Creates a node, adds it to target, returns the new node.
-        function addNodeTo(addTarget, className) {
-            var div = scope_Document.createElement("div");
-            if (className) {
-                addClass(div, className);
-            }
-            addTarget.appendChild(div);
-            return div;
-        }
-        // Append a origin to the base
-        function addOrigin(base, handleNumber) {
-            var origin = addNodeTo(base, options.cssClasses.origin);
-            var handle = addNodeTo(origin, options.cssClasses.handle);
-            addNodeTo(handle, options.cssClasses.touchArea);
-            handle.setAttribute("data-handle", String(handleNumber));
-            if (options.keyboardSupport) {
-                // https://developer.mozilla.org/en-US/docs/Web/HTML/Global_attributes/tabindex
-                // 0 = focusable and reachable
-                handle.setAttribute("tabindex", "0");
-                handle.addEventListener("keydown", function (event) {
-                    return eventKeydown(event, handleNumber);
-                });
-            }
-            if (options.handleAttributes !== undefined) {
-                var attributes_1 = options.handleAttributes[handleNumber];
-                Object.keys(attributes_1).forEach(function (attribute) {
-                    handle.setAttribute(attribute, attributes_1[attribute]);
-                });
-            }
-            handle.setAttribute("role", "slider");
-            handle.setAttribute("aria-orientation", options.ort ? "vertical" : "horizontal");
-            if (handleNumber === 0) {
-                addClass(handle, options.cssClasses.handleLower);
-            }
-            else if (handleNumber === options.handles - 1) {
-                addClass(handle, options.cssClasses.handleUpper);
-            }
-            return origin;
-        }
-        // Insert nodes for connect elements
-        function addConnect(base, add) {
-            if (!add) {
-                return false;
-            }
-            return addNodeTo(base, options.cssClasses.connect);
-        }
-        // Add handles to the slider base.
-        function addElements(connectOptions, base) {
-            var connectBase = addNodeTo(base, options.cssClasses.connects);
-            scope_Handles = [];
-            scope_Connects = [];
-            scope_Connects.push(addConnect(connectBase, connectOptions[0]));
-            // [::::O====O====O====]
-            // connectOptions = [0, 1, 1, 1]
-            for (var i = 0; i < options.handles; i++) {
-                // Keep a list of all added handles.
-                scope_Handles.push(addOrigin(base, i));
-                scope_HandleNumbers[i] = i;
-                scope_Connects.push(addConnect(connectBase, connectOptions[i + 1]));
-            }
-        }
-        // Initialize a single slider.
-        function addSlider(addTarget) {
-            // Apply classes and data to the target.
-            addClass(addTarget, options.cssClasses.target);
-            if (options.dir === 0) {
-                addClass(addTarget, options.cssClasses.ltr);
-            }
-            else {
-                addClass(addTarget, options.cssClasses.rtl);
-            }
-            if (options.ort === 0) {
-                addClass(addTarget, options.cssClasses.horizontal);
-            }
-            else {
-                addClass(addTarget, options.cssClasses.vertical);
-            }
-            var textDirection = getComputedStyle(addTarget).direction;
-            if (textDirection === "rtl") {
-                addClass(addTarget, options.cssClasses.textDirectionRtl);
-            }
-            else {
-                addClass(addTarget, options.cssClasses.textDirectionLtr);
-            }
-            return addNodeTo(addTarget, options.cssClasses.base);
-        }
-        function addTooltip(handle, handleNumber) {
-            if (!options.tooltips || !options.tooltips[handleNumber]) {
-                return false;
-            }
-            return addNodeTo(handle.firstChild, options.cssClasses.tooltip);
-        }
-        function isSliderDisabled() {
-            return scope_Target.hasAttribute("disabled");
-        }
-        // Disable the slider dragging if any handle is disabled
-        function isHandleDisabled(handleNumber) {
-            var handleOrigin = scope_Handles[handleNumber];
-            return handleOrigin.hasAttribute("disabled");
-        }
-        function removeTooltips() {
-            if (scope_Tooltips) {
-                removeEvent("update" + INTERNAL_EVENT_NS.tooltips);
-                scope_Tooltips.forEach(function (tooltip) {
-                    if (tooltip) {
-                        removeElement(tooltip);
-                    }
-                });
-                scope_Tooltips = null;
-            }
-        }
-        // The tooltips option is a shorthand for using the 'update' event.
-        function tooltips() {
-            removeTooltips();
-            // Tooltips are added with options.tooltips in original order.
-            scope_Tooltips = scope_Handles.map(addTooltip);
-            bindEvent("update" + INTERNAL_EVENT_NS.tooltips, function (values, handleNumber, unencoded) {
-                if (!scope_Tooltips || !options.tooltips) {
-                    return;
-                }
-                if (scope_Tooltips[handleNumber] === false) {
-                    return;
-                }
-                var formattedValue = values[handleNumber];
-                if (options.tooltips[handleNumber] !== true) {
-                    formattedValue = options.tooltips[handleNumber].to(unencoded[handleNumber]);
-                }
-                scope_Tooltips[handleNumber].innerHTML = formattedValue;
-            });
-        }
-        function aria() {
-            removeEvent("update" + INTERNAL_EVENT_NS.aria);
-            bindEvent("update" + INTERNAL_EVENT_NS.aria, function (values, handleNumber, unencoded, tap, positions) {
-                // Update Aria Values for all handles, as a change in one changes min and max values for the next.
-                scope_HandleNumbers.forEach(function (index) {
-                    var handle = scope_Handles[index];
-                    var min = checkHandlePosition(scope_Locations, index, 0, true, true, true);
-                    var max = checkHandlePosition(scope_Locations, index, 100, true, true, true);
-                    var now = positions[index];
-                    // Formatted value for display
-                    var text = String(options.ariaFormat.to(unencoded[index]));
-                    // Map to slider range values
-                    min = scope_Spectrum.fromStepping(min).toFixed(1);
-                    max = scope_Spectrum.fromStepping(max).toFixed(1);
-                    now = scope_Spectrum.fromStepping(now).toFixed(1);
-                    handle.children[0].setAttribute("aria-valuemin", min);
-                    handle.children[0].setAttribute("aria-valuemax", max);
-                    handle.children[0].setAttribute("aria-valuenow", now);
-                    handle.children[0].setAttribute("aria-valuetext", text);
-                });
-            });
-        }
-        function getGroup(pips) {
-            // Use the range.
-            if (pips.mode === exports.PipsMode.Range || pips.mode === exports.PipsMode.Steps) {
-                return scope_Spectrum.xVal;
-            }
-            if (pips.mode === exports.PipsMode.Count) {
-                if (pips.values < 2) {
-                    throw new Error("noUiSlider: 'values' (>= 2) required for mode 'count'.");
-                }
-                // Divide 0 - 100 in 'count' parts.
-                var interval = pips.values - 1;
-                var spread = 100 / interval;
-                var values = [];
-                // List these parts and have them handled as 'positions'.
-                while (interval--) {
-                    values[interval] = interval * spread;
-                }
-                values.push(100);
-                return mapToRange(values, pips.stepped);
-            }
-            if (pips.mode === exports.PipsMode.Positions) {
-                // Map all percentages to on-range values.
-                return mapToRange(pips.values, pips.stepped);
-            }
-            if (pips.mode === exports.PipsMode.Values) {
-                // If the value must be stepped, it needs to be converted to a percentage first.
-                if (pips.stepped) {
-                    return pips.values.map(function (value) {
-                        // Convert to percentage, apply step, return to value.
-                        return scope_Spectrum.fromStepping(scope_Spectrum.getStep(scope_Spectrum.toStepping(value)));
-                    });
-                }
-                // Otherwise, we can simply use the values.
-                return pips.values;
-            }
-            return []; // pips.mode = never
-        }
-        function mapToRange(values, stepped) {
-            return values.map(function (value) {
-                return scope_Spectrum.fromStepping(stepped ? scope_Spectrum.getStep(value) : value);
-            });
-        }
-        function generateSpread(pips) {
-            function safeIncrement(value, increment) {
-                // Avoid floating point variance by dropping the smallest decimal places.
-                return Number((value + increment).toFixed(7));
-            }
-            var group = getGroup(pips);
-            var indexes = {};
-            var firstInRange = scope_Spectrum.xVal[0];
-            var lastInRange = scope_Spectrum.xVal[scope_Spectrum.xVal.length - 1];
-            var ignoreFirst = false;
-            var ignoreLast = false;
-            var prevPct = 0;
-            // Create a copy of the group, sort it and filter away all duplicates.
-            group = unique(group.slice().sort(function (a, b) {
-                return a - b;
-            }));
-            // Make sure the range starts with the first element.
-            if (group[0] !== firstInRange) {
-                group.unshift(firstInRange);
-                ignoreFirst = true;
-            }
-            // Likewise for the last one.
-            if (group[group.length - 1] !== lastInRange) {
-                group.push(lastInRange);
-                ignoreLast = true;
-            }
-            group.forEach(function (current, index) {
-                // Get the current step and the lower + upper positions.
-                var step;
-                var i;
-                var q;
-                var low = current;
-                var high = group[index + 1];
-                var newPct;
-                var pctDifference;
-                var pctPos;
-                var type;
-                var steps;
-                var realSteps;
-                var stepSize;
-                var isSteps = pips.mode === exports.PipsMode.Steps;
-                // When using 'steps' mode, use the provided steps.
-                // Otherwise, we'll step on to the next subrange.
-                if (isSteps) {
-                    step = scope_Spectrum.xNumSteps[index];
-                }
-                // Default to a 'full' step.
-                if (!step) {
-                    step = high - low;
-                }
-                // If high is undefined we are at the last subrange. Make sure it iterates once (#1088)
-                if (high === undefined) {
-                    high = low;
-                }
-                // Make sure step isn't 0, which would cause an infinite loop (#654)
-                step = Math.max(step, 0.0000001);
-                // Find all steps in the subrange.
-                for (i = low; i <= high; i = safeIncrement(i, step)) {
-                    // Get the percentage value for the current step,
-                    // calculate the size for the subrange.
-                    newPct = scope_Spectrum.toStepping(i);
-                    pctDifference = newPct - prevPct;
-                    steps = pctDifference / (pips.density || 1);
-                    realSteps = Math.round(steps);
-                    // This ratio represents the amount of percentage-space a point indicates.
-                    // For a density 1 the points/percentage = 1. For density 2, that percentage needs to be re-divided.
-                    // Round the percentage offset to an even number, then divide by two
-                    // to spread the offset on both sides of the range.
-                    stepSize = pctDifference / realSteps;
-                    // Divide all points evenly, adding the correct number to this subrange.
-                    // Run up to <= so that 100% gets a point, event if ignoreLast is set.
-                    for (q = 1; q <= realSteps; q += 1) {
-                        // The ratio between the rounded value and the actual size might be ~1% off.
-                        // Correct the percentage offset by the number of points
-                        // per subrange. density = 1 will result in 100 points on the
-                        // full range, 2 for 50, 4 for 25, etc.
-                        pctPos = prevPct + q * stepSize;
-                        indexes[pctPos.toFixed(5)] = [scope_Spectrum.fromStepping(pctPos), 0];
-                    }
-                    // Determine the point type.
-                    type = group.indexOf(i) > -1 ? exports.PipsType.LargeValue : isSteps ? exports.PipsType.SmallValue : exports.PipsType.NoValue;
-                    // Enforce the 'ignoreFirst' option by overwriting the type for 0.
-                    if (!index && ignoreFirst && i !== high) {
-                        type = 0;
-                    }
-                    if (!(i === high && ignoreLast)) {
-                        // Mark the 'type' of this point. 0 = plain, 1 = real value, 2 = step value.
-                        indexes[newPct.toFixed(5)] = [i, type];
-                    }
-                    // Update the percentage count.
-                    prevPct = newPct;
-                }
-            });
-            return indexes;
-        }
-        function addMarking(spread, filterFunc, formatter) {
-            var _a, _b;
-            var element = scope_Document.createElement("div");
-            var valueSizeClasses = (_a = {},
-                _a[exports.PipsType.None] = "",
-                _a[exports.PipsType.NoValue] = options.cssClasses.valueNormal,
-                _a[exports.PipsType.LargeValue] = options.cssClasses.valueLarge,
-                _a[exports.PipsType.SmallValue] = options.cssClasses.valueSub,
-                _a);
-            var markerSizeClasses = (_b = {},
-                _b[exports.PipsType.None] = "",
-                _b[exports.PipsType.NoValue] = options.cssClasses.markerNormal,
-                _b[exports.PipsType.LargeValue] = options.cssClasses.markerLarge,
-                _b[exports.PipsType.SmallValue] = options.cssClasses.markerSub,
-                _b);
-            var valueOrientationClasses = [options.cssClasses.valueHorizontal, options.cssClasses.valueVertical];
-            var markerOrientationClasses = [options.cssClasses.markerHorizontal, options.cssClasses.markerVertical];
-            addClass(element, options.cssClasses.pips);
-            addClass(element, options.ort === 0 ? options.cssClasses.pipsHorizontal : options.cssClasses.pipsVertical);
-            function getClasses(type, source) {
-                var a = source === options.cssClasses.value;
-                var orientationClasses = a ? valueOrientationClasses : markerOrientationClasses;
-                var sizeClasses = a ? valueSizeClasses : markerSizeClasses;
-                return source + " " + orientationClasses[options.ort] + " " + sizeClasses[type];
-            }
-            function addSpread(offset, value, type) {
-                // Apply the filter function, if it is set.
-                type = filterFunc ? filterFunc(value, type) : type;
-                if (type === exports.PipsType.None) {
-                    return;
-                }
-                // Add a marker for every point
-                var node = addNodeTo(element, false);
-                node.className = getClasses(type, options.cssClasses.marker);
-                node.style[options.style] = offset + "%";
-                // Values are only appended for points marked '1' or '2'.
-                if (type > exports.PipsType.NoValue) {
-                    node = addNodeTo(element, false);
-                    node.className = getClasses(type, options.cssClasses.value);
-                    node.setAttribute("data-value", String(value));
-                    node.style[options.style] = offset + "%";
-                    node.innerHTML = String(formatter.to(value));
-                }
-            }
-            // Append all points.
-            Object.keys(spread).forEach(function (offset) {
-                addSpread(offset, spread[offset][0], spread[offset][1]);
-            });
-            return element;
-        }
-        function removePips() {
-            if (scope_Pips) {
-                removeElement(scope_Pips);
-                scope_Pips = null;
-            }
-        }
-        function pips(pips) {
-            // Fix #669
-            removePips();
-            var spread = generateSpread(pips);
-            var filter = pips.filter;
-            var format = pips.format || {
-                to: function (value) {
-                    return String(Math.round(value));
-                },
-            };
-            scope_Pips = scope_Target.appendChild(addMarking(spread, filter, format));
-            return scope_Pips;
-        }
-        // Shorthand for base dimensions.
-        function baseSize() {
-            var rect = scope_Base.getBoundingClientRect();
-            var alt = ("offset" + ["Width", "Height"][options.ort]);
-            return options.ort === 0 ? rect.width || scope_Base[alt] : rect.height || scope_Base[alt];
-        }
-        // Handler for attaching events trough a proxy.
-        function attachEvent(events, element, callback, data) {
-            // This function can be used to 'filter' events to the slider.
-            // element is a node, not a nodeList
-            var method = function (event) {
-                var e = fixEvent(event, data.pageOffset, data.target || element);
-                // fixEvent returns false if this event has a different target
-                // when handling (multi-) touch events;
-                if (!e) {
-                    return false;
-                }
-                // doNotReject is passed by all end events to make sure released touches
-                // are not rejected, leaving the slider "stuck" to the cursor;
-                if (isSliderDisabled() && !data.doNotReject) {
-                    return false;
-                }
-                // Stop if an active 'tap' transition is taking place.
-                if (hasClass(scope_Target, options.cssClasses.tap) && !data.doNotReject) {
-                    return false;
-                }
-                // Ignore right or middle clicks on start #454
-                if (events === actions.start && e.buttons !== undefined && e.buttons > 1) {
-                    return false;
-                }
-                // Ignore right or middle clicks on start #454
-                if (data.hover && e.buttons) {
-                    return false;
-                }
-                // 'supportsPassive' is only true if a browser also supports touch-action: none in CSS.
-                // iOS safari does not, so it doesn't get to benefit from passive scrolling. iOS does support
-                // touch-action: manipulation, but that allows panning, which breaks
-                // sliders after zooming/on non-responsive pages.
-                // See: https://bugs.webkit.org/show_bug.cgi?id=133112
-                if (!supportsPassive) {
-                    e.preventDefault();
-                }
-                e.calcPoint = e.points[options.ort];
-                // Call the event handler with the event [ and additional data ].
-                callback(e, data);
-                return;
-            };
-            var methods = [];
-            // Bind a closure on the target for every event type.
-            events.split(" ").forEach(function (eventName) {
-                element.addEventListener(eventName, method, supportsPassive ? { passive: true } : false);
-                methods.push([eventName, method]);
-            });
-            return methods;
-        }
-        // Provide a clean event with standardized offset values.
-        function fixEvent(e, pageOffset, eventTarget) {
-            // Filter the event to register the type, which can be
-            // touch, mouse or pointer. Offset changes need to be
-            // made on an event specific basis.
-            var touch = e.type.indexOf("touch") === 0;
-            var mouse = e.type.indexOf("mouse") === 0;
-            var pointer = e.type.indexOf("pointer") === 0;
-            var x = 0;
-            var y = 0;
-            // IE10 implemented pointer events with a prefix;
-            if (e.type.indexOf("MSPointer") === 0) {
-                pointer = true;
-            }
-            // Erroneous events seem to be passed in occasionally on iOS/iPadOS after user finishes interacting with
-            // the slider. They appear to be of type MouseEvent, yet they don't have usual properties set. Ignore
-            // events that have no touches or buttons associated with them. (#1057, #1079, #1095)
-            if (e.type === "mousedown" && !e.buttons && !e.touches) {
-                return false;
-            }
-            // The only thing one handle should be concerned about is the touches that originated on top of it.
-            if (touch) {
-                // Returns true if a touch originated on the target.
-                var isTouchOnTarget = function (checkTouch) {
-                    var target = checkTouch.target;
-                    return (target === eventTarget ||
-                        eventTarget.contains(target) ||
-                        (e.composed && e.composedPath().shift() === eventTarget));
-                };
-                // In the case of touchstart events, we need to make sure there is still no more than one
-                // touch on the target so we look amongst all touches.
-                if (e.type === "touchstart") {
-                    var targetTouches = Array.prototype.filter.call(e.touches, isTouchOnTarget);
-                    // Do not support more than one touch per handle.
-                    if (targetTouches.length > 1) {
-                        return false;
-                    }
-                    x = targetTouches[0].pageX;
-                    y = targetTouches[0].pageY;
-                }
-                else {
-                    // In the other cases, find on changedTouches is enough.
-                    var targetTouch = Array.prototype.find.call(e.changedTouches, isTouchOnTarget);
-                    // Cancel if the target touch has not moved.
-                    if (!targetTouch) {
-                        return false;
-                    }
-                    x = targetTouch.pageX;
-                    y = targetTouch.pageY;
-                }
-            }
-            pageOffset = pageOffset || getPageOffset(scope_Document);
-            if (mouse || pointer) {
-                x = e.clientX + pageOffset.x;
-                y = e.clientY + pageOffset.y;
-            }
-            e.pageOffset = pageOffset;
-            e.points = [x, y];
-            e.cursor = mouse || pointer; // Fix #435
-            return e;
-        }
-        // Translate a coordinate in the document to a percentage on the slider
-        function calcPointToPercentage(calcPoint) {
-            var location = calcPoint - offset(scope_Base, options.ort);
-            var proposal = (location * 100) / baseSize();
-            // Clamp proposal between 0% and 100%
-            // Out-of-bound coordinates may occur when .noUi-base pseudo-elements
-            // are used (e.g. contained handles feature)
-            proposal = limit(proposal);
-            return options.dir ? 100 - proposal : proposal;
-        }
-        // Find handle closest to a certain percentage on the slider
-        function getClosestHandle(clickedPosition) {
-            var smallestDifference = 100;
-            var handleNumber = false;
-            scope_Handles.forEach(function (handle, index) {
-                // Disabled handles are ignored
-                if (isHandleDisabled(index)) {
-                    return;
-                }
-                var handlePosition = scope_Locations[index];
-                var differenceWithThisHandle = Math.abs(handlePosition - clickedPosition);
-                // Initial state
-                var clickAtEdge = differenceWithThisHandle === 100 && smallestDifference === 100;
-                // Difference with this handle is smaller than the previously checked handle
-                var isCloser = differenceWithThisHandle < smallestDifference;
-                var isCloserAfter = differenceWithThisHandle <= smallestDifference && clickedPosition > handlePosition;
-                if (isCloser || isCloserAfter || clickAtEdge) {
-                    handleNumber = index;
-                    smallestDifference = differenceWithThisHandle;
-                }
-            });
-            return handleNumber;
-        }
-        // Fire 'end' when a mouse or pen leaves the document.
-        function documentLeave(event, data) {
-            if (event.type === "mouseout" &&
-                event.target.nodeName === "HTML" &&
-                event.relatedTarget === null) {
-                eventEnd(event, data);
-            }
-        }
-        // Handle movement on document for handle and range drag.
-        function eventMove(event, data) {
-            // Fix #498
-            // Check value of .buttons in 'start' to work around a bug in IE10 mobile (data.buttonsProperty).
-            // https://connect.microsoft.com/IE/feedback/details/927005/mobile-ie10-windows-phone-buttons-property-of-pointermove-event-always-zero
-            // IE9 has .buttons and .which zero on mousemove.
-            // Firefox breaks the spec MDN defines.
-            if (navigator.appVersion.indexOf("MSIE 9") === -1 && event.buttons === 0 && data.buttonsProperty !== 0) {
-                return eventEnd(event, data);
-            }
-            // Check if we are moving up or down
-            var movement = (options.dir ? -1 : 1) * (event.calcPoint - data.startCalcPoint);
-            // Convert the movement into a percentage of the slider width/height
-            var proposal = (movement * 100) / data.baseSize;
-            moveHandles(movement > 0, proposal, data.locations, data.handleNumbers, data.connect);
-        }
-        // Unbind move events on document, call callbacks.
-        function eventEnd(event, data) {
-            // The handle is no longer active, so remove the class.
-            if (data.handle) {
-                removeClass(data.handle, options.cssClasses.active);
-                scope_ActiveHandlesCount -= 1;
-            }
-            // Unbind the move and end events, which are added on 'start'.
-            data.listeners.forEach(function (c) {
-                scope_DocumentElement.removeEventListener(c[0], c[1]);
-            });
-            if (scope_ActiveHandlesCount === 0) {
-                // Remove dragging class.
-                removeClass(scope_Target, options.cssClasses.drag);
-                setZindex();
-                // Remove cursor styles and text-selection events bound to the body.
-                if (event.cursor) {
-                    scope_Body.style.cursor = "";
-                    scope_Body.removeEventListener("selectstart", preventDefault);
-                }
-            }
-            data.handleNumbers.forEach(function (handleNumber) {
-                fireEvent("change", handleNumber);
-                fireEvent("set", handleNumber);
-                fireEvent("end", handleNumber);
-            });
-        }
-        // Bind move events on document.
-        function eventStart(event, data) {
-            // Ignore event if any handle is disabled
-            if (data.handleNumbers.some(isHandleDisabled)) {
-                return;
-            }
-            var handle;
-            if (data.handleNumbers.length === 1) {
-                var handleOrigin = scope_Handles[data.handleNumbers[0]];
-                handle = handleOrigin.children[0];
-                scope_ActiveHandlesCount += 1;
-                // Mark the handle as 'active' so it can be styled.
-                addClass(handle, options.cssClasses.active);
-            }
-            // A drag should never propagate up to the 'tap' event.
-            event.stopPropagation();
-            // Record the event listeners.
-            var listeners = [];
-            // Attach the move and end events.
-            var moveEvent = attachEvent(actions.move, scope_DocumentElement, eventMove, {
-                // The event target has changed so we need to propagate the original one so that we keep
-                // relying on it to extract target touches.
-                target: event.target,
-                handle: handle,
-                connect: data.connect,
-                listeners: listeners,
-                startCalcPoint: event.calcPoint,
-                baseSize: baseSize(),
-                pageOffset: event.pageOffset,
-                handleNumbers: data.handleNumbers,
-                buttonsProperty: event.buttons,
-                locations: scope_Locations.slice(),
-            });
-            var endEvent = attachEvent(actions.end, scope_DocumentElement, eventEnd, {
-                target: event.target,
-                handle: handle,
-                listeners: listeners,
-                doNotReject: true,
-                handleNumbers: data.handleNumbers,
-            });
-            var outEvent = attachEvent("mouseout", scope_DocumentElement, documentLeave, {
-                target: event.target,
-                handle: handle,
-                listeners: listeners,
-                doNotReject: true,
-                handleNumbers: data.handleNumbers,
-            });
-            // We want to make sure we pushed the listeners in the listener list rather than creating
-            // a new one as it has already been passed to the event handlers.
-            listeners.push.apply(listeners, moveEvent.concat(endEvent, outEvent));
-            // Text selection isn't an issue on touch devices,
-            // so adding cursor styles can be skipped.
-            if (event.cursor) {
-                // Prevent the 'I' cursor and extend the range-drag cursor.
-                scope_Body.style.cursor = getComputedStyle(event.target).cursor;
-                // Mark the target with a dragging state.
-                if (scope_Handles.length > 1) {
-                    addClass(scope_Target, options.cssClasses.drag);
-                }
-                // Prevent text selection when dragging the handles.
-                // In noUiSlider <= 9.2.0, this was handled by calling preventDefault on mouse/touch start/move,
-                // which is scroll blocking. The selectstart event is supported by FireFox starting from version 52,
-                // meaning the only holdout is iOS Safari. This doesn't matter: text selection isn't triggered there.
-                // The 'cursor' flag is false.
-                // See: http://caniuse.com/#search=selectstart
-                scope_Body.addEventListener("selectstart", preventDefault, false);
-            }
-            data.handleNumbers.forEach(function (handleNumber) {
-                fireEvent("start", handleNumber);
-            });
-        }
-        // Move closest handle to tapped location.
-        function eventTap(event) {
-            // The tap event shouldn't propagate up
-            event.stopPropagation();
-            var proposal = calcPointToPercentage(event.calcPoint);
-            var handleNumber = getClosestHandle(proposal);
-            // Tackle the case that all handles are 'disabled'.
-            if (handleNumber === false) {
-                return;
-            }
-            // Flag the slider as it is now in a transitional state.
-            // Transition takes a configurable amount of ms (default 300). Re-enable the slider after that.
-            if (!options.events.snap) {
-                addClassFor(scope_Target, options.cssClasses.tap, options.animationDuration);
-            }
-            setHandle(handleNumber, proposal, true, true);
-            setZindex();
-            fireEvent("slide", handleNumber, true);
-            fireEvent("update", handleNumber, true);
-            if (!options.events.snap) {
-                fireEvent("change", handleNumber, true);
-                fireEvent("set", handleNumber, true);
-            }
-            else {
-                eventStart(event, { handleNumbers: [handleNumber] });
-            }
-        }
-        // Fires a 'hover' event for a hovered mouse/pen position.
-        function eventHover(event) {
-            var proposal = calcPointToPercentage(event.calcPoint);
-            var to = scope_Spectrum.getStep(proposal);
-            var value = scope_Spectrum.fromStepping(to);
-            Object.keys(scope_Events).forEach(function (targetEvent) {
-                if ("hover" === targetEvent.split(".")[0]) {
-                    scope_Events[targetEvent].forEach(function (callback) {
-                        callback.call(scope_Self, value);
-                    });
-                }
-            });
-        }
-        // Handles keydown on focused handles
-        // Don't move the document when pressing arrow keys on focused handles
-        function eventKeydown(event, handleNumber) {
-            if (isSliderDisabled() || isHandleDisabled(handleNumber)) {
-                return false;
-            }
-            var horizontalKeys = ["Left", "Right"];
-            var verticalKeys = ["Down", "Up"];
-            var largeStepKeys = ["PageDown", "PageUp"];
-            var edgeKeys = ["Home", "End"];
-            if (options.dir && !options.ort) {
-                // On an right-to-left slider, the left and right keys act inverted
-                horizontalKeys.reverse();
-            }
-            else if (options.ort && !options.dir) {
-                // On a top-to-bottom slider, the up and down keys act inverted
-                verticalKeys.reverse();
-                largeStepKeys.reverse();
-            }
-            // Strip "Arrow" for IE compatibility. https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/key
-            var key = event.key.replace("Arrow", "");
-            var isLargeDown = key === largeStepKeys[0];
-            var isLargeUp = key === largeStepKeys[1];
-            var isDown = key === verticalKeys[0] || key === horizontalKeys[0] || isLargeDown;
-            var isUp = key === verticalKeys[1] || key === horizontalKeys[1] || isLargeUp;
-            var isMin = key === edgeKeys[0];
-            var isMax = key === edgeKeys[1];
-            if (!isDown && !isUp && !isMin && !isMax) {
-                return true;
-            }
-            event.preventDefault();
-            var to;
-            if (isUp || isDown) {
-                var direction = isDown ? 0 : 1;
-                var steps = getNextStepsForHandle(handleNumber);
-                var step = steps[direction];
-                // At the edge of a slider, do nothing
-                if (step === null) {
-                    return false;
-                }
-                // No step set, use the default of 10% of the sub-range
-                if (step === false) {
-                    step = scope_Spectrum.getDefaultStep(scope_Locations[handleNumber], isDown, options.keyboardDefaultStep);
-                }
-                if (isLargeUp || isLargeDown) {
-                    step *= options.keyboardPageMultiplier;
-                }
-                else {
-                    step *= options.keyboardMultiplier;
-                }
-                // Step over zero-length ranges (#948);
-                step = Math.max(step, 0.0000001);
-                // Decrement for down steps
-                step = (isDown ? -1 : 1) * step;
-                to = scope_Values[handleNumber] + step;
-            }
-            else if (isMax) {
-                // End key
-                to = options.spectrum.xVal[options.spectrum.xVal.length - 1];
-            }
-            else {
-                // Home key
-                to = options.spectrum.xVal[0];
-            }
-            setHandle(handleNumber, scope_Spectrum.toStepping(to), true, true);
-            fireEvent("slide", handleNumber);
-            fireEvent("update", handleNumber);
-            fireEvent("change", handleNumber);
-            fireEvent("set", handleNumber);
-            return false;
-        }
-        // Attach events to several slider parts.
-        function bindSliderEvents(behaviour) {
-            // Attach the standard drag event to the handles.
-            if (!behaviour.fixed) {
-                scope_Handles.forEach(function (handle, index) {
-                    // These events are only bound to the visual handle
-                    // element, not the 'real' origin element.
-                    attachEvent(actions.start, handle.children[0], eventStart, {
-                        handleNumbers: [index],
-                    });
-                });
-            }
-            // Attach the tap event to the slider base.
-            if (behaviour.tap) {
-                attachEvent(actions.start, scope_Base, eventTap, {});
-            }
-            // Fire hover events
-            if (behaviour.hover) {
-                attachEvent(actions.move, scope_Base, eventHover, {
-                    hover: true,
-                });
-            }
-            // Make the range draggable.
-            if (behaviour.drag) {
-                scope_Connects.forEach(function (connect, index) {
-                    if (connect === false || index === 0 || index === scope_Connects.length - 1) {
-                        return;
-                    }
-                    var handleBefore = scope_Handles[index - 1];
-                    var handleAfter = scope_Handles[index];
-                    var eventHolders = [connect];
-                    var handlesToDrag = [handleBefore, handleAfter];
-                    var handleNumbersToDrag = [index - 1, index];
-                    addClass(connect, options.cssClasses.draggable);
-                    // When the range is fixed, the entire range can
-                    // be dragged by the handles. The handle in the first
-                    // origin will propagate the start event upward,
-                    // but it needs to be bound manually on the other.
-                    if (behaviour.fixed) {
-                        eventHolders.push(handleBefore.children[0]);
-                        eventHolders.push(handleAfter.children[0]);
-                    }
-                    if (behaviour.dragAll) {
-                        handlesToDrag = scope_Handles;
-                        handleNumbersToDrag = scope_HandleNumbers;
-                    }
-                    eventHolders.forEach(function (eventHolder) {
-                        attachEvent(actions.start, eventHolder, eventStart, {
-                            handles: handlesToDrag,
-                            handleNumbers: handleNumbersToDrag,
-                            connect: connect,
-                        });
-                    });
-                });
-            }
-        }
-        // Attach an event to this slider, possibly including a namespace
-        function bindEvent(namespacedEvent, callback) {
-            scope_Events[namespacedEvent] = scope_Events[namespacedEvent] || [];
-            scope_Events[namespacedEvent].push(callback);
-            // If the event bound is 'update,' fire it immediately for all handles.
-            if (namespacedEvent.split(".")[0] === "update") {
-                scope_Handles.forEach(function (a, index) {
-                    fireEvent("update", index);
-                });
-            }
-        }
-        function isInternalNamespace(namespace) {
-            return namespace === INTERNAL_EVENT_NS.aria || namespace === INTERNAL_EVENT_NS.tooltips;
-        }
-        // Undo attachment of event
-        function removeEvent(namespacedEvent) {
-            var event = namespacedEvent && namespacedEvent.split(".")[0];
-            var namespace = event ? namespacedEvent.substring(event.length) : namespacedEvent;
-            Object.keys(scope_Events).forEach(function (bind) {
-                var tEvent = bind.split(".")[0];
-                var tNamespace = bind.substring(tEvent.length);
-                if ((!event || event === tEvent) && (!namespace || namespace === tNamespace)) {
-                    // only delete protected internal event if intentional
-                    if (!isInternalNamespace(tNamespace) || namespace === tNamespace) {
-                        delete scope_Events[bind];
-                    }
-                }
-            });
-        }
-        // External event handling
-        function fireEvent(eventName, handleNumber, tap) {
-            Object.keys(scope_Events).forEach(function (targetEvent) {
-                var eventType = targetEvent.split(".")[0];
-                if (eventName === eventType) {
-                    scope_Events[targetEvent].forEach(function (callback) {
-                        callback.call(
-                        // Use the slider public API as the scope ('this')
-                        scope_Self,
-                        // Return values as array, so arg_1[arg_2] is always valid.
-                        scope_Values.map(options.format.to),
-                        // Handle index, 0 or 1
-                        handleNumber,
-                        // Un-formatted slider values
-                        scope_Values.slice(),
-                        // Event is fired by tap, true or false
-                        tap || false,
-                        // Left offset of the handle, in relation to the slider
-                        scope_Locations.slice(),
-                        // add the slider public API to an accessible parameter when this is unavailable
-                        scope_Self);
-                    });
-                }
-            });
-        }
-        // Split out the handle positioning logic so the Move event can use it, too
-        function checkHandlePosition(reference, handleNumber, to, lookBackward, lookForward, getValue) {
-            var distance;
-            // For sliders with multiple handles, limit movement to the other handle.
-            // Apply the margin option by adding it to the handle positions.
-            if (scope_Handles.length > 1 && !options.events.unconstrained) {
-                if (lookBackward && handleNumber > 0) {
-                    distance = scope_Spectrum.getAbsoluteDistance(reference[handleNumber - 1], options.margin, false);
-                    to = Math.max(to, distance);
-                }
-                if (lookForward && handleNumber < scope_Handles.length - 1) {
-                    distance = scope_Spectrum.getAbsoluteDistance(reference[handleNumber + 1], options.margin, true);
-                    to = Math.min(to, distance);
-                }
-            }
-            // The limit option has the opposite effect, limiting handles to a
-            // maximum distance from another. Limit must be > 0, as otherwise
-            // handles would be unmovable.
-            if (scope_Handles.length > 1 && options.limit) {
-                if (lookBackward && handleNumber > 0) {
-                    distance = scope_Spectrum.getAbsoluteDistance(reference[handleNumber - 1], options.limit, false);
-                    to = Math.min(to, distance);
-                }
-                if (lookForward && handleNumber < scope_Handles.length - 1) {
-                    distance = scope_Spectrum.getAbsoluteDistance(reference[handleNumber + 1], options.limit, true);
-                    to = Math.max(to, distance);
-                }
-            }
-            // The padding option keeps the handles a certain distance from the
-            // edges of the slider. Padding must be > 0.
-            if (options.padding) {
-                if (handleNumber === 0) {
-                    distance = scope_Spectrum.getAbsoluteDistance(0, options.padding[0], false);
-                    to = Math.max(to, distance);
-                }
-                if (handleNumber === scope_Handles.length - 1) {
-                    distance = scope_Spectrum.getAbsoluteDistance(100, options.padding[1], true);
-                    to = Math.min(to, distance);
-                }
-            }
-            to = scope_Spectrum.getStep(to);
-            // Limit percentage to the 0 - 100 range
-            to = limit(to);
-            // Return false if handle can't move
-            if (to === reference[handleNumber] && !getValue) {
-                return false;
-            }
-            return to;
-        }
-        // Uses slider orientation to create CSS rules. a = base value;
-        function inRuleOrder(v, a) {
-            var o = options.ort;
-            return (o ? a : v) + ", " + (o ? v : a);
-        }
-        // Moves handle(s) by a percentage
-        // (bool, % to move, [% where handle started, ...], [index in scope_Handles, ...])
-        function moveHandles(upward, proposal, locations, handleNumbers, connect) {
-            var proposals = locations.slice();
-            // Store first handle now, so we still have it in case handleNumbers is reversed
-            var firstHandle = handleNumbers[0];
-            var b = [!upward, upward];
-            var f = [upward, !upward];
-            // Copy handleNumbers so we don't change the dataset
-            handleNumbers = handleNumbers.slice();
-            // Check to see which handle is 'leading'.
-            // If that one can't move the second can't either.
-            if (upward) {
-                handleNumbers.reverse();
-            }
-            // Step 1: get the maximum percentage that any of the handles can move
-            if (handleNumbers.length > 1) {
-                handleNumbers.forEach(function (handleNumber, o) {
-                    var to = checkHandlePosition(proposals, handleNumber, proposals[handleNumber] + proposal, b[o], f[o], false);
-                    // Stop if one of the handles can't move.
-                    if (to === false) {
-                        proposal = 0;
-                    }
-                    else {
-                        proposal = to - proposals[handleNumber];
-                        proposals[handleNumber] = to;
-                    }
-                });
-            }
-            // If using one handle, check backward AND forward
-            else {
-                b = f = [true];
-            }
-            var state = false;
-            // Step 2: Try to set the handles with the found percentage
-            handleNumbers.forEach(function (handleNumber, o) {
-                state = setHandle(handleNumber, locations[handleNumber] + proposal, b[o], f[o]) || state;
-            });
-            // Step 3: If a handle moved, fire events
-            if (state) {
-                handleNumbers.forEach(function (handleNumber) {
-                    fireEvent("update", handleNumber);
-                    fireEvent("slide", handleNumber);
-                });
-                // If target is a connect, then fire drag event
-                if (connect != undefined) {
-                    fireEvent("drag", firstHandle);
-                }
-            }
-        }
-        // Takes a base value and an offset. This offset is used for the connect bar size.
-        // In the initial design for this feature, the origin element was 1% wide.
-        // Unfortunately, a rounding bug in Chrome makes it impossible to implement this feature
-        // in this manner: https://bugs.chromium.org/p/chromium/issues/detail?id=798223
-        function transformDirection(a, b) {
-            return options.dir ? 100 - a - b : a;
-        }
-        // Updates scope_Locations and scope_Values, updates visual state
-        function updateHandlePosition(handleNumber, to) {
-            // Update locations.
-            scope_Locations[handleNumber] = to;
-            // Convert the value to the slider stepping/range.
-            scope_Values[handleNumber] = scope_Spectrum.fromStepping(to);
-            var translation = transformDirection(to, 0) - scope_DirOffset;
-            var translateRule = "translate(" + inRuleOrder(translation + "%", "0") + ")";
-            scope_Handles[handleNumber].style[options.transformRule] = translateRule;
-            updateConnect(handleNumber);
-            updateConnect(handleNumber + 1);
-        }
-        // Handles before the slider middle are stacked later = higher,
-        // Handles after the middle later is lower
-        // [[7] [8] .......... | .......... [5] [4]
-        function setZindex() {
-            scope_HandleNumbers.forEach(function (handleNumber) {
-                var dir = scope_Locations[handleNumber] > 50 ? -1 : 1;
-                var zIndex = 3 + (scope_Handles.length + dir * handleNumber);
-                scope_Handles[handleNumber].style.zIndex = String(zIndex);
-            });
-        }
-        // Test suggested values and apply margin, step.
-        // if exactInput is true, don't run checkHandlePosition, then the handle can be placed in between steps (#436)
-        function setHandle(handleNumber, to, lookBackward, lookForward, exactInput) {
-            if (!exactInput) {
-                to = checkHandlePosition(scope_Locations, handleNumber, to, lookBackward, lookForward, false);
-            }
-            if (to === false) {
-                return false;
-            }
-            updateHandlePosition(handleNumber, to);
-            return true;
-        }
-        // Updates style attribute for connect nodes
-        function updateConnect(index) {
-            // Skip connects set to false
-            if (!scope_Connects[index]) {
-                return;
-            }
-            var l = 0;
-            var h = 100;
-            if (index !== 0) {
-                l = scope_Locations[index - 1];
-            }
-            if (index !== scope_Connects.length - 1) {
-                h = scope_Locations[index];
-            }
-            // We use two rules:
-            // 'translate' to change the left/top offset;
-            // 'scale' to change the width of the element;
-            // As the element has a width of 100%, a translation of 100% is equal to 100% of the parent (.noUi-base)
-            var connectWidth = h - l;
-            var translateRule = "translate(" + inRuleOrder(transformDirection(l, connectWidth) + "%", "0") + ")";
-            var scaleRule = "scale(" + inRuleOrder(connectWidth / 100, "1") + ")";
-            scope_Connects[index].style[options.transformRule] =
-                translateRule + " " + scaleRule;
-        }
-        // Parses value passed to .set method. Returns current value if not parse-able.
-        function resolveToValue(to, handleNumber) {
-            // Setting with null indicates an 'ignore'.
-            // Inputting 'false' is invalid.
-            if (to === null || to === false || to === undefined) {
-                return scope_Locations[handleNumber];
-            }
-            // If a formatted number was passed, attempt to decode it.
-            if (typeof to === "number") {
-                to = String(to);
-            }
-            to = options.format.from(to);
-            if (to !== false) {
-                to = scope_Spectrum.toStepping(to);
-            }
-            // If parsing the number failed, use the current value.
-            if (to === false || isNaN(to)) {
-                return scope_Locations[handleNumber];
-            }
-            return to;
-        }
-        // Set the slider value.
-        function valueSet(input, fireSetEvent, exactInput) {
-            var values = asArray(input);
-            var isInit = scope_Locations[0] === undefined;
-            // Event fires by default
-            fireSetEvent = fireSetEvent === undefined ? true : fireSetEvent;
-            // Animation is optional.
-            // Make sure the initial values were set before using animated placement.
-            if (options.animate && !isInit) {
-                addClassFor(scope_Target, options.cssClasses.tap, options.animationDuration);
-            }
-            // First pass, without lookAhead but with lookBackward. Values are set from left to right.
-            scope_HandleNumbers.forEach(function (handleNumber) {
-                setHandle(handleNumber, resolveToValue(values[handleNumber], handleNumber), true, false, exactInput);
-            });
-            var i = scope_HandleNumbers.length === 1 ? 0 : 1;
-            // Spread handles evenly across the slider if the range has no size (min=max)
-            if (isInit && scope_Spectrum.hasNoSize()) {
-                exactInput = true;
-                scope_Locations[0] = 0;
-                if (scope_HandleNumbers.length > 1) {
-                    var space_1 = 100 / (scope_HandleNumbers.length - 1);
-                    scope_HandleNumbers.forEach(function (handleNumber) {
-                        scope_Locations[handleNumber] = handleNumber * space_1;
-                    });
-                }
-            }
-            // Secondary passes. Now that all base values are set, apply constraints.
-            // Iterate all handles to ensure constraints are applied for the entire slider (Issue #1009)
-            for (; i < scope_HandleNumbers.length; ++i) {
-                scope_HandleNumbers.forEach(function (handleNumber) {
-                    setHandle(handleNumber, scope_Locations[handleNumber], true, true, exactInput);
-                });
-            }
-            setZindex();
-            scope_HandleNumbers.forEach(function (handleNumber) {
-                fireEvent("update", handleNumber);
-                // Fire the event only for handles that received a new value, as per #579
-                if (values[handleNumber] !== null && fireSetEvent) {
-                    fireEvent("set", handleNumber);
-                }
-            });
-        }
-        // Reset slider to initial values
-        function valueReset(fireSetEvent) {
-            valueSet(options.start, fireSetEvent);
-        }
-        // Set value for a single handle
-        function valueSetHandle(handleNumber, value, fireSetEvent, exactInput) {
-            // Ensure numeric input
-            handleNumber = Number(handleNumber);
-            if (!(handleNumber >= 0 && handleNumber < scope_HandleNumbers.length)) {
-                throw new Error("noUiSlider: invalid handle number, got: " + handleNumber);
-            }
-            // Look both backward and forward, since we don't want this handle to "push" other handles (#960);
-            // The exactInput argument can be used to ignore slider stepping (#436)
-            setHandle(handleNumber, resolveToValue(value, handleNumber), true, true, exactInput);
-            fireEvent("update", handleNumber);
-            if (fireSetEvent) {
-                fireEvent("set", handleNumber);
-            }
-        }
-        // Get the slider value.
-        function valueGet(unencoded) {
-            if (unencoded === void 0) { unencoded = false; }
-            if (unencoded) {
-                // return a copy of the raw values
-                return scope_Values.length === 1 ? scope_Values[0] : scope_Values.slice(0);
-            }
-            var values = scope_Values.map(options.format.to);
-            // If only one handle is used, return a single value.
-            if (values.length === 1) {
-                return values[0];
-            }
-            return values;
-        }
-        // Removes classes from the root and empties it.
-        function destroy() {
-            // remove protected internal listeners
-            removeEvent(INTERNAL_EVENT_NS.aria);
-            removeEvent(INTERNAL_EVENT_NS.tooltips);
-            Object.keys(options.cssClasses).forEach(function (key) {
-                removeClass(scope_Target, options.cssClasses[key]);
-            });
-            while (scope_Target.firstChild) {
-                scope_Target.removeChild(scope_Target.firstChild);
-            }
-            delete scope_Target.noUiSlider;
-        }
-        function getNextStepsForHandle(handleNumber) {
-            var location = scope_Locations[handleNumber];
-            var nearbySteps = scope_Spectrum.getNearbySteps(location);
-            var value = scope_Values[handleNumber];
-            var increment = nearbySteps.thisStep.step;
-            var decrement = null;
-            // If snapped, directly use defined step value
-            if (options.snap) {
-                return [
-                    value - nearbySteps.stepBefore.startValue || null,
-                    nearbySteps.stepAfter.startValue - value || null,
-                ];
-            }
-            // If the next value in this step moves into the next step,
-            // the increment is the start of the next step - the current value
-            if (increment !== false) {
-                if (value + increment > nearbySteps.stepAfter.startValue) {
-                    increment = nearbySteps.stepAfter.startValue - value;
-                }
-            }
-            // If the value is beyond the starting point
-            if (value > nearbySteps.thisStep.startValue) {
-                decrement = nearbySteps.thisStep.step;
-            }
-            else if (nearbySteps.stepBefore.step === false) {
-                decrement = false;
-            }
-            // If a handle is at the start of a step, it always steps back into the previous step first
-            else {
-                decrement = value - nearbySteps.stepBefore.highestStep;
-            }
-            // Now, if at the slider edges, there is no in/decrement
-            if (location === 100) {
-                increment = null;
-            }
-            else if (location === 0) {
-                decrement = null;
-            }
-            // As per #391, the comparison for the decrement step can have some rounding issues.
-            var stepDecimals = scope_Spectrum.countStepDecimals();
-            // Round per #391
-            if (increment !== null && increment !== false) {
-                increment = Number(increment.toFixed(stepDecimals));
-            }
-            if (decrement !== null && decrement !== false) {
-                decrement = Number(decrement.toFixed(stepDecimals));
-            }
-            return [decrement, increment];
-        }
-        // Get the current step size for the slider.
-        function getNextSteps() {
-            return scope_HandleNumbers.map(getNextStepsForHandle);
-        }
-        // Updatable: margin, limit, padding, step, range, animate, snap
-        function updateOptions(optionsToUpdate, fireSetEvent) {
-            // Spectrum is created using the range, snap, direction and step options.
-            // 'snap' and 'step' can be updated.
-            // If 'snap' and 'step' are not passed, they should remain unchanged.
-            var v = valueGet();
-            var updateAble = [
-                "margin",
-                "limit",
-                "padding",
-                "range",
-                "animate",
-                "snap",
-                "step",
-                "format",
-                "pips",
-                "tooltips",
-            ];
-            // Only change options that we're actually passed to update.
-            updateAble.forEach(function (name) {
-                // Check for undefined. null removes the value.
-                if (optionsToUpdate[name] !== undefined) {
-                    originalOptions[name] = optionsToUpdate[name];
-                }
-            });
-            var newOptions = testOptions(originalOptions);
-            // Load new options into the slider state
-            updateAble.forEach(function (name) {
-                if (optionsToUpdate[name] !== undefined) {
-                    options[name] = newOptions[name];
-                }
-            });
-            scope_Spectrum = newOptions.spectrum;
-            // Limit, margin and padding depend on the spectrum but are stored outside of it. (#677)
-            options.margin = newOptions.margin;
-            options.limit = newOptions.limit;
-            options.padding = newOptions.padding;
-            // Update pips, removes existing.
-            if (options.pips) {
-                pips(options.pips);
-            }
-            else {
-                removePips();
-            }
-            // Update tooltips, removes existing.
-            if (options.tooltips) {
-                tooltips();
-            }
-            else {
-                removeTooltips();
-            }
-            // Invalidate the current positioning so valueSet forces an update.
-            scope_Locations = [];
-            valueSet(isSet(optionsToUpdate.start) ? optionsToUpdate.start : v, fireSetEvent);
-        }
-        // Initialization steps
-        function setupSlider() {
-            // Create the base element, initialize HTML and set classes.
-            // Add handles and connect elements.
-            scope_Base = addSlider(scope_Target);
-            addElements(options.connect, scope_Base);
-            // Attach user events.
-            bindSliderEvents(options.events);
-            // Use the public value method to set the start values.
-            valueSet(options.start);
-            if (options.pips) {
-                pips(options.pips);
-            }
-            if (options.tooltips) {
-                tooltips();
-            }
-            aria();
-        }
-        setupSlider();
-        var scope_Self = {
-            destroy: destroy,
-            steps: getNextSteps,
-            on: bindEvent,
-            off: removeEvent,
-            get: valueGet,
-            set: valueSet,
-            setHandle: valueSetHandle,
-            reset: valueReset,
-            // Exposed for unit testing, don't use this in your application.
-            __moveHandles: function (upward, proposal, handleNumbers) {
-                moveHandles(upward, proposal, scope_Locations, handleNumbers);
-            },
-            options: originalOptions,
-            updateOptions: updateOptions,
-            target: scope_Target,
-            removePips: removePips,
-            removeTooltips: removeTooltips,
-            getPositions: function () {
-                return scope_Locations.slice();
-            },
-            getTooltips: function () {
-                return scope_Tooltips;
-            },
-            getOrigins: function () {
-                return scope_Handles;
-            },
-            pips: pips, // Issue #594
-        };
-        return scope_Self;
-    }
-    // Run the standard initializer
-    function initialize(target, originalOptions) {
-        if (!target || !target.nodeName) {
-            throw new Error("noUiSlider: create requires a single element, got: " + target);
-        }
-        // Throw an error if the slider was already initialized.
-        if (target.noUiSlider) {
-            throw new Error("noUiSlider: Slider was already initialized.");
-        }
-        // Test the options and create the slider environment;
-        var options = testOptions(originalOptions);
-        var api = scope(target, options, originalOptions);
-        target.noUiSlider = api;
-        return api;
-    }
-    var nouislider = {
-        // Exposed for unit testing, don't use this in your application.
-        __spectrum: Spectrum,
-        // A reference to the default classes, allows global changes.
-        // Use the cssClasses option for changes to one slider.
-        cssClasses: cssClasses,
-        create: initialize,
-    };
-
-    exports.create = initialize;
-    exports.cssClasses = cssClasses;
-    exports["default"] = nouislider;
-
-    Object.defineProperty(exports, '__esModule', { value: true });
-
-}));