ivanvanderbyl-amqp 0.6.13.1

data/lib/mq/exchange.rb

@@ -0,0 +1,351 @@
+class MQ
+  # An Exchange acts as an ingress point for all published messages. An
+  # exchange may also be described as a router or a matcher. Every
+  # published message is received by an exchange which, depending on its
+  # type (described below), determines how to deliver the message.
+  #
+  # It determines the next delivery hop by examining the bindings associated
+  # with the exchange.
+  #
+  # There are three (3) supported Exchange types: direct, fanout and topic.
+  #
+  # As part of the standard, the server _must_ predeclare the direct exchange
+  # 'amq.direct' and the fanout exchange 'amq.fanout' (all exchange names 
+  # starting with 'amq.' are reserved). Attempts to declare an exchange using
+  # 'amq.' as the name will raise an MQ:Error and fail. In practice these
+  # default exchanges are never used directly by client code.
+  #
+  # These predececlared exchanges are used when the client code declares
+  # an exchange without a name. In these cases the library will use
+  # the default exchange for publishing the messages.
+  #
+  class Exchange
+    include AMQP
+
+    # Defines, intializes and returns an Exchange to act as an ingress
+    # point for all published messages.
+    #
+    # There are three (3) supported Exchange types: direct, fanout and topic.
+    #
+    # As part of the standard, the server _must_ predeclare the direct exchange
+    # 'amq.direct' and the fanout exchange 'amq.fanout' (all exchange names 
+    # starting with 'amq.' are reserved). Attempts to declare an exchange using
+    # 'amq.' as the name will raise an MQ:Error and fail. In practice these
+    # default exchanges are never used directly by client code.
+    #
+    # == Direct
+    # A direct exchange is useful for 1:1 communication between a publisher and
+    # subscriber. Messages are routed to the queue with a binding that shares
+    # the same name as the exchange. Alternately, the messages are routed to 
+    # the bound queue that shares the same name as the routing key used for 
+    # defining the exchange. This exchange type does not honor the :key option
+    # when defining a new instance with a name. It _will_ honor the :key option
+    # if the exchange name is the empty string. This is because an exchange
+    # defined with the empty string uses the default pre-declared exchange
+    # called 'amq.direct'. In this case it needs to use :key to do its matching.
+    #
+    #  # exchange is named 'foo'
+    #  exchange = MQ::Exchange.new(MQ.new, :direct, 'foo')
+    #
+    #  # or, the exchange can use the default name (amq.direct) and perform
+    #  # routing comparisons using the :key
+    #  exchange = MQ::Exchange.new(MQ.new, :direct, "", :key => 'foo')
+    #  exchange.publish('some data') # will be delivered to queue bound to 'foo'
+    #
+    #  queue = MQ::Queue.new(MQ.new, 'foo')
+    #  # can receive data since the queue name and the exchange key match exactly
+    #  queue.pop { |data| puts "received data [#{data}]" }
+    #
+    # == Fanout
+    # A fanout exchange is useful for 1:N communication where one publisher 
+    # feeds multiple subscribers. Like direct exchanges, messages published 
+    # to a fanout exchange are delivered to queues whose name matches the 
+    # exchange name (or are bound to that exchange name). Each queue gets 
+    # its own copy of the message.
+    #
+    # Like the direct exchange type, this exchange type does not honor the 
+    # :key option when defining a new instance with a name. It _will_ honor 
+    # the :key option if the exchange name is the empty string. Fanout exchanges
+    # defined with the empty string as the name use the default 'amq.fanout'.
+    # In this case it needs to use :key to do its matching.
+    #
+    #  EM.run do
+    #    clock = MQ::Exchange.new(MQ.new, :fanout, 'clock')
+    #    EM.add_periodic_timer(1) do
+    #      puts "\npublishing #{time = Time.now}"
+    #      clock.publish(Marshal.dump(time))
+    #    end
+    #
+    #    # one way of defining a queue
+    #    amq = MQ::Queue.new(MQ.new, 'every second')
+    #    amq.bind(MQ.fanout('clock')).subscribe do |time|
+    #      puts "every second received #{Marshal.load(time)}"
+    #    end
+    #
+    #    # defining a queue using the convenience method
+    #    # note the string passed to #bind
+    #    MQ.queue('every 5 seconds').bind('clock').subscribe do |time|
+    #      time = Marshal.load(time)
+    #      puts "every 5 seconds received #{time}" if time.strftime('%S').to_i%5 == 0
+    #    end
+    #  end
+    #
+    # == Topic
+    # A topic exchange allows for messages to be published to an exchange 
+    # tagged with a specific routing key. The Exchange uses the routing key
+    # to determine which queues to deliver the message. Wildcard matching 
+    # is allowed. The topic must be declared using dot notation to separate 
+    # each subtopic.
+    #
+    # This is the only exchange type to honor the :key parameter.
+    #
+    # As part of the AMQP standard, each server _should_ predeclare a topic 
+    # exchange called 'amq.topic' (this is not required by the standard).
+    #
+    # The classic example is delivering market data. When publishing market
+    # data for stocks, we may subdivide the stream based on 2 
+    # characteristics: nation code and trading symbol. The topic tree for 
+    # Apple Computer would look like:
+    #  'stock.us.aapl'
+    # For a foreign stock, it may look like:
+    #  'stock.de.dax'
+    #
+    # When publishing data to the exchange, bound queues subscribing to the
+    # exchange indicate which data interests them by passing a routing key
+    # for matching against the published routing key.
+    #
+    #  EM.run do
+    #    exch = MQ::Exchange.new(MQ.new, :topic, "stocks")
+    #    keys = ['stock.us.aapl', 'stock.de.dax']
+    #
+    #    EM.add_periodic_timer(1) do # every second
+    #      puts
+    #      exch.publish(10+rand(10), :routing_key => keys[rand(2)])
+    #    end
+    #
+    #    # match against one dot-separated item
+    #    MQ.queue('us stocks').bind(exch, :key => 'stock.us.*').subscribe do |price|
+    #      puts "us stock price [#{price}]"
+    #    end
+    #
+    #    # match against multiple dot-separated items
+    #    MQ.queue('all stocks').bind(exch, :key => 'stock.#').subscribe do |price|
+    #      puts "all stocks: price [#{price}]"
+    #    end
+    #
+    #    # require exact match
+    #    MQ.queue('only dax').bind(exch, :key => 'stock.de.dax').subscribe do |price|
+    #      puts "dax price [#{price}]"
+    #    end
+    #  end
+    #
+    # For matching, the '*' (asterisk) wildcard matches against one 
+    # dot-separated item only. The '#' wildcard (hash or pound symbol) 
+    # matches against 0 or more dot-separated items. If none of these 
+    # symbols are used, the exchange performs a comparison looking for an 
+    # exact match.
+    #
+    # == Options
+    # * :passive => true | false (default false)
+    # If set, the server will not create the exchange if it does not
+    # already exist. The client can use this to check whether an exchange
+    # exists without modifying  the server state.
+    # 
+    # * :durable => true | false (default false)
+    # If set when creating a new exchange, the exchange will be marked as
+    # durable.  Durable exchanges remain active when a server restarts.
+    # Non-durable exchanges (transient exchanges) are purged if/when a
+    # server restarts. 
+    #
+    # A transient exchange (the default) is stored in memory-only
+    # therefore it is a good choice for high-performance and low-latency
+    # message publishing.
+    #
+    # Durable exchanges cause all messages to be written to non-volatile
+    # backing store (i.e. disk) prior to routing to any bound queues.
+    #
+    # * :auto_delete => true | false (default false)
+    # If set, the exchange is deleted when all queues have finished
+    # using it. The server waits for a short period of time before
+    # determining the exchange is unused to give time to the client code
+    # to bind a queue to it.
+    #
+    # If the exchange has been previously declared, this option is ignored
+    # on subsequent declarations.
+    #
+    # * :internal => true | false (default false)
+    # If set, the exchange may not be used directly by publishers, but
+    # only when bound to other exchanges. Internal exchanges are used to
+    # construct wiring that is not visible to applications.
+    #
+    # * :nowait => true | false (default true)
+    # If set, the server will not respond to the method. The client should
+    # not wait for a reply method.  If the server could not complete the
+    # method it will raise a channel or connection exception.
+    #
+    # * :no_declare => true | false (default false)
+    # If set, the exchange will not be declared to the
+    # AMQP broker at instantiation-time. This allows the AMQP
+    # client to send messages to exchanges that were
+    # already declared by someone else, e.g. if the client
+    # does not have sufficient privilege to declare (create)
+    # an exchange. Use with caution, as binding to an exchange
+    # with the no-declare option causes your system to become
+    # sensitive to the ordering of clients' actions!
+    #
+    # == Exceptions
+    # Doing any of these activities are illegal and will raise MQ:Error.
+    # * redeclare an already-declared exchange to a different type
+    # * :passive => true and the exchange does not exist (NOT_FOUND)
+    #
+    def initialize mq, type, name, opts = {}
+      @mq                         = mq
+      @type, @name, @opts = type, name, opts
+      @mq.exchanges[@name = name] ||= self
+      @key                        = opts[:key]
+
+      unless name == "amq.#{type}" or name == '' or opts[:no_declare]
+        @mq.callback {
+          @mq.send Protocol::Exchange::Declare.new({:exchange => name,
+                                                    :type     => type,
+                                                    :nowait   => true}.merge(opts))
+        }
+      end
+    end
+
+    attr_reader :name, :type, :key
+
+    # This method publishes a staged file message to a specific exchange.
+    # The file message will be routed to queues as defined by the exchange
+    # configuration and distributed to any active consumers when the
+    # transaction, if any, is committed.
+    #
+    #  exchange = MQ.direct('name', :key => 'foo.bar')
+    #  exchange.publish("some data")
+    #
+    # The method takes several hash key options which modify the behavior or 
+    # lifecycle of the message.
+    #
+    # * :routing_key => 'string'
+    #
+    # Specifies the routing key for the message.  The routing key is
+    # used for routing messages depending on the exchange configuration.
+    #
+    # * :mandatory => true | false (default false)
+    #
+    # This flag tells the server how to react if the message cannot be
+    # routed to a queue.  If this flag is set, the server will return an
+    # unroutable message with a Return method.  If this flag is zero, the
+    # server silently drops the message.
+    #
+    # * :immediate => true | false (default false)
+    #
+    # This flag tells the server how to react if the message cannot be
+    # routed to a queue consumer immediately.  If this flag is set, the
+    # server will return an undeliverable message with a Return method.
+    # If this flag is zero, the server will queue the message, but with
+    # no guarantee that it will ever be consumed.
+    #
+    #  * :persistent
+    # True or False. When true, this message will remain in the queue until 
+    # it is consumed (if the queue is durable). When false, the message is
+    # lost if the server restarts and the queue is recreated.
+    #
+    # For high-performance and low-latency, set :persistent => false so the
+    # message stays in memory and is never persisted to non-volatile (slow)
+    # storage.
+    #
+    # The following standard AMQP header values can also be set as options:
+    #   :content_type         (default application/octet-stream)
+    #   :delivery_mode        (set using :persistent)
+    #   :priority
+    #   :reply_to
+    #   :content_encoding
+    #   :application_headers
+    #   :priority             (default 0)
+    #   :correlation_id
+    #   :reply_to
+    #   :expiration
+    #   :message_id
+    #   :timestamp
+    #   :type
+    #   :user_id
+    #   :app_id
+    #   :cluster_id
+    #
+    # TODO: - breaks with header values that are ruby objects (convert to strings?)
+    #
+    def publish data, opts = {}
+      raise MQ::Error, "No connection to broker, unable to publish #{data} with #{opts}" unless @mq.connected?
+
+      @mq.callback {
+        out = []
+
+        out << Protocol::Basic::Publish.new({:exchange    => name,
+                                             :routing_key => opts[:key] || @key}.merge(opts))
+        headers =  {
+            :content_type        => 'application/octet-stream',
+            :delivery_mode       => (opts[:persistent] ? 2 : 1),
+            :priority            => 0,
+            :reply_to            => nil,
+            :content_encoding    => nil,
+            :application_headers => nil,
+            :priority            => nil,
+            :correlation_id      => nil,
+            :reply_to            => nil,
+            :expiration          => nil,
+            :message_id          => nil,
+            :timestamp           => nil,
+            :type                => nil,
+            :user_id             => nil,
+            :app_id              => nil,
+            :cluster_id          => nil}.merge(opts)
+
+        headers.delete_if { |key, value| value == nil }
+
+        out << Protocol::Header.new(Protocol::Basic, data.bytesize, headers)
+
+        out << Frame::Body.new(data.to_s)
+
+        @mq.send *out
+      }
+      self
+    end
+
+    # This method deletes an exchange.  When an exchange is deleted all queue
+    # bindings on the exchange are cancelled.
+    #
+    # Further attempts to publish messages to a deleted exchange will raise
+    # an MQ::Error due to a channel close exception.
+    #
+    #  exchange = MQ.direct('name', :key => 'foo.bar')
+    #  exchange.delete
+    #
+    # == Options
+    # * :nowait => true | false (default true)
+    # If set, the server will not respond to the method. The client should
+    # not wait for a reply method.  If the server could not complete the
+    # method it will raise a channel or connection exception.
+    #
+    #  exchange.delete(:nowait => false)
+    #
+    # * :if_unused => true | false (default false)
+    # If set, the server will only delete the exchange if it has no queue
+    # bindings. If the exchange has queue bindings the server does not
+    # delete it but raises a channel exception instead (MQ:Error).
+    #    
+    def delete opts = {}
+      @mq.callback {
+        @mq.send Protocol::Exchange::Delete.new({:exchange => name,
+                                                 :nowait   => true}.merge(opts))
+        @mq.exchanges.delete name
+      }
+      nil
+    end
+
+    def reset
+      @deferred_status = nil
+      initialize @mq, @type, @name, @opts
+    end
+  end
+end

data/lib/mq/header.rb

@@ -0,0 +1,33 @@
+class MQ
+  class Header
+    include AMQP
+
+    def initialize(mq, header_obj)
+      @mq = mq
+      @header = header_obj
+    end
+
+    # Acknowledges the receipt of this message with the server.
+    def ack
+      @mq.callback{
+        @mq.send Protocol::Basic::Ack.new(:delivery_tag => properties[:delivery_tag])
+      }
+    end
+
+    # Reject this message (XXX currently unimplemented in rabbitmq)
+    # * :requeue => true | false (default false)
+    def reject opts = {}
+      @mq.callback{
+        @mq.send Protocol::Basic::Reject.new(opts.merge(:delivery_tag => properties[:delivery_tag]))
+      }
+    end
+
+    def method_missing meth, *args, &blk
+      @header.send meth, *args, &blk
+    end
+
+    def inspect
+      @header.inspect
+    end
+  end
+end

data/lib/mq/logger.rb

@@ -0,0 +1,89 @@
+class MQ
+  class Logger
+    def initialize *args, &block
+      opts = args.pop if args.last.is_a? Hash
+      opts ||= {}
+
+      printer(block) if block
+
+      @prop = opts
+      @tags = ([:timestamp] + args).uniq
+    end
+
+    attr_reader :prop
+    alias :base :prop
+
+    def log severity, *args
+      opts = args.pop if args.last.is_a? Hash and args.size != 1
+      opts ||= {}
+      opts = @prop.clone.update(opts)
+
+      data = args.shift
+
+      data = {:type => :exception,
+              :name => data.class.to_s.intern,
+              :backtrace => data.backtrace,
+              :message => data.message} if data.is_a? Exception
+
+      (@tags + args).each do |tag|
+        tag = tag.to_sym
+        case tag
+        when :timestamp
+          opts.update :timestamp => Time.now
+        when :hostname
+          @hostname ||= { :hostname => `hostname`.strip }
+          opts.update @hostname
+        when :process
+          @process_id ||= { :process_id => Process.pid,
+                            :process_name => $0,
+                            :process_parent_id => Process.ppid,
+                            :thread_id => Thread.current.object_id }
+          opts.update :process => @process_id
+        else
+          (opts[:tags] ||= []) << tag
+        end
+      end
+
+      opts.update(:severity => severity,
+                  :msg => data)
+
+      print(opts)
+      unless Logger.disabled?
+        MQ.fanout('logging', :durable => true).publish Marshal.dump(opts)
+      end
+
+      opts
+    end
+    alias :method_missing :log
+
+    def print data = nil, &block
+      if block
+        @printer = block
+      elsif data.is_a? Proc
+        @printer = data
+      elsif data
+        (pr = @printer || self.class.printer) and pr.call(data)
+      else
+        @printer
+      end
+    end
+    alias :printer :print
+    
+    def self.printer &block
+      @printer = block if block
+      @printer
+    end
+
+    def self.disabled?
+      !!@disabled
+    end
+    
+    def self.enable
+      @disabled = false
+    end
+    
+    def self.disable
+      @disabled = true
+    end
+  end
+end