isomorfeus-ferret 0.12.7 → 0.13.0

data/ext/isomorfeus_ferret_ext/lz4.h

@@ -0,0 +1,774 @@
+/*
+ *  LZ4 - Fast LZ compression algorithm
+ *  Header File
+ *  Copyright (C) 2011-present, Yann Collet.
+
+   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are
+   met:
+
+       * Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+       * Redistributions in binary form must reproduce the above
+   copyright notice, this list of conditions and the following disclaimer
+   in the documentation and/or other materials provided with the
+   distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+   You can contact the author at :
+    - LZ4 homepage : http://www.lz4.org
+    - LZ4 source repository : https://github.com/lz4/lz4
+*/
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+#ifndef LZ4_H_2983827168210
+#define LZ4_H_2983827168210
+
+/* --- Dependency --- */
+#include <stddef.h>   /* size_t */
+
+
+/**
+  Introduction
+
+  LZ4 is lossless compression algorithm, providing compression speed >500 MB/s per core,
+  scalable with multi-cores CPU. It features an extremely fast decoder, with speed in
+  multiple GB/s per core, typically reaching RAM speed limits on multi-core systems.
+
+  The LZ4 compression library provides in-memory compression and decompression functions.
+  It gives full buffer control to user.
+  Compression can be done in:
+    - a single step (described as Simple Functions)
+    - a single step, reusing a context (described in Advanced Functions)
+    - unbounded multiple steps (described as Streaming compression)
+
+  lz4.h generates and decodes LZ4-compressed blocks (doc/lz4_Block_format.md).
+  Decompressing such a compressed block requires additional metadata.
+  Exact metadata depends on exact decompression function.
+  For the typical case of LZ4_decompress_safe(),
+  metadata includes block's compressed size, and maximum bound of decompressed size.
+  Each application is free to encode and pass such metadata in whichever way it wants.
+
+  lz4.h only handle blocks, it can not generate Frames.
+
+  Blocks are different from Frames (doc/lz4_Frame_format.md).
+  Frames bundle both blocks and metadata in a specified manner.
+  Embedding metadata is required for compressed data to be self-contained and portable.
+  Frame format is delivered through a companion API, declared in lz4frame.h.
+  The `lz4` CLI can only manage frames.
+*/
+
+/*^***************************************************************
+*  Export parameters
+*****************************************************************/
+/*
+*  LZ4_DLL_EXPORT :
+*  Enable exporting of functions when building a Windows DLL
+*  LZ4LIB_VISIBILITY :
+*  Control library symbols visibility.
+*/
+#ifndef LZ4LIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define LZ4LIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define LZ4LIB_VISIBILITY
+#  endif
+#endif
+#if defined(LZ4_DLL_EXPORT) && (LZ4_DLL_EXPORT==1)
+#  define LZ4LIB_API __declspec(dllexport) LZ4LIB_VISIBILITY
+#elif defined(LZ4_DLL_IMPORT) && (LZ4_DLL_IMPORT==1)
+#  define LZ4LIB_API __declspec(dllimport) LZ4LIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define LZ4LIB_API LZ4LIB_VISIBILITY
+#endif
+
+/*------   Version   ------*/
+#define LZ4_VERSION_MAJOR    1    /* for breaking interface changes  */
+#define LZ4_VERSION_MINOR    9    /* for new (non-breaking) interface capabilities */
+#define LZ4_VERSION_RELEASE  3    /* for tweaks, bug-fixes, or development */
+
+#define LZ4_VERSION_NUMBER (LZ4_VERSION_MAJOR *100*100 + LZ4_VERSION_MINOR *100 + LZ4_VERSION_RELEASE)
+
+#define LZ4_LIB_VERSION LZ4_VERSION_MAJOR.LZ4_VERSION_MINOR.LZ4_VERSION_RELEASE
+#define LZ4_QUOTE(str) #str
+#define LZ4_EXPAND_AND_QUOTE(str) LZ4_QUOTE(str)
+#define LZ4_VERSION_STRING LZ4_EXPAND_AND_QUOTE(LZ4_LIB_VERSION)
+
+LZ4LIB_API int LZ4_versionNumber (void);  /**< library version number; useful to check dll version */
+LZ4LIB_API const char* LZ4_versionString (void);   /**< library version string; useful to check dll version */
+
+
+/*-************************************
+*  Tuning parameter
+**************************************/
+/*!
+ * LZ4_MEMORY_USAGE :
+ * Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
+ * Increasing memory usage improves compression ratio.
+ * Reduced memory usage may improve speed, thanks to better cache locality.
+ * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache
+ */
+#ifndef LZ4_MEMORY_USAGE
+# define LZ4_MEMORY_USAGE 14
+#endif
+
+
+/*-************************************
+*  Simple Functions
+**************************************/
+/*! LZ4_compress_default() :
+ *  Compresses 'srcSize' bytes from buffer 'src'
+ *  into already allocated 'dst' buffer of size 'dstCapacity'.
+ *  Compression is guaranteed to succeed if 'dstCapacity' >= LZ4_compressBound(srcSize).
+ *  It also runs faster, so it's a recommended setting.
+ *  If the function cannot compress 'src' into a more limited 'dst' budget,
+ *  compression stops *immediately*, and the function result is zero.
+ *  In which case, 'dst' content is undefined (invalid).
+ *      srcSize : max supported value is LZ4_MAX_INPUT_SIZE.
+ *      dstCapacity : size of buffer 'dst' (which must be already allocated)
+ *     @return  : the number of bytes written into buffer 'dst' (necessarily <= dstCapacity)
+ *                or 0 if compression fails
+ * Note : This function is protected against buffer overflow scenarios (never writes outside 'dst' buffer, nor read outside 'source' buffer).
+ */
+LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int dstCapacity);
+
+/*! LZ4_decompress_safe() :
+ *  compressedSize : is the exact complete size of the compressed block.
+ *  dstCapacity : is the size of destination buffer (which must be already allocated), presumed an upper bound of decompressed size.
+ * @return : the number of bytes decompressed into destination buffer (necessarily <= dstCapacity)
+ *           If destination buffer is not large enough, decoding will stop and output an error code (negative value).
+ *           If the source stream is detected malformed, the function will stop decoding and return a negative result.
+ * Note 1 : This function is protected against malicious data packets :
+ *          it will never writes outside 'dst' buffer, nor read outside 'source' buffer,
+ *          even if the compressed block is maliciously modified to order the decoder to do these actions.
+ *          In such case, the decoder stops immediately, and considers the compressed block malformed.
+ * Note 2 : compressedSize and dstCapacity must be provided to the function, the compressed block does not contain them.
+ *          The implementation is free to send / store / derive this information in whichever way is most beneficial.
+ *          If there is a need for a different format which bundles together both compressed data and its metadata, consider looking at lz4frame.h instead.
+ */
+LZ4LIB_API int LZ4_decompress_safe (const char* src, char* dst, int compressedSize, int dstCapacity);
+
+
+/*-************************************
+*  Advanced Functions
+**************************************/
+#define LZ4_MAX_INPUT_SIZE        0x7E000000   /* 2 113 929 216 bytes */
+#define LZ4_COMPRESSBOUND(isize)  ((unsigned)(isize) > (unsigned)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16)
+
+/*! LZ4_compressBound() :
+    Provides the maximum size that LZ4 compression may output in a "worst case" scenario (input data not compressible)
+    This function is primarily useful for memory allocation purposes (destination buffer size).
+    Macro LZ4_COMPRESSBOUND() is also provided for compilation-time evaluation (stack memory allocation for example).
+    Note that LZ4_compress_default() compresses faster when dstCapacity is >= LZ4_compressBound(srcSize)
+        inputSize  : max supported value is LZ4_MAX_INPUT_SIZE
+        return : maximum output size in a "worst case" scenario
+              or 0, if input size is incorrect (too large or negative)
+*/
+LZ4LIB_API int LZ4_compressBound(int inputSize);
+
+/*! LZ4_compress_fast() :
+    Same as LZ4_compress_default(), but allows selection of "acceleration" factor.
+    The larger the acceleration value, the faster the algorithm, but also the lesser the compression.
+    It's a trade-off. It can be fine tuned, with each successive value providing roughly +~3% to speed.
+    An acceleration value of "1" is the same as regular LZ4_compress_default()
+    Values <= 0 will be replaced by LZ4_ACCELERATION_DEFAULT (currently == 1, see lz4.c).
+    Values > LZ4_ACCELERATION_MAX will be replaced by LZ4_ACCELERATION_MAX (currently == 65537, see lz4.c).
+*/
+LZ4LIB_API int LZ4_compress_fast (const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+
+/*! LZ4_compress_fast_extState() :
+ *  Same as LZ4_compress_fast(), using an externally allocated memory space for its state.
+ *  Use LZ4_sizeofState() to know how much memory must be allocated,
+ *  and allocate it on 8-bytes boundaries (using `malloc()` typically).
+ *  Then, provide this buffer as `void* state` to compression function.
+ */
+LZ4LIB_API int LZ4_sizeofState(void);
+LZ4LIB_API int LZ4_compress_fast_extState (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+
+/*! LZ4_compress_destSize() :
+ *  Reverse the logic : compresses as much data as possible from 'src' buffer
+ *  into already allocated buffer 'dst', of size >= 'targetDestSize'.
+ *  This function either compresses the entire 'src' content into 'dst' if it's large enough,
+ *  or fill 'dst' buffer completely with as much data as possible from 'src'.
+ *  note: acceleration parameter is fixed to "default".
+ *
+ * *srcSizePtr : will be modified to indicate how many bytes where read from 'src' to fill 'dst'.
+ *               New value is necessarily <= input value.
+ * @return : Nb bytes written into 'dst' (necessarily <= targetDestSize)
+ *           or 0 if compression fails.
+ *
+ * Note : from v1.8.2 to v1.9.1, this function had a bug (fixed un v1.9.2+):
+ *        the produced compressed content could, in specific circumstances,
+ *        require to be decompressed into a destination buffer larger
+ *        by at least 1 byte than the content to decompress.
+ *        If an application uses `LZ4_compress_destSize()`,
+ *        it's highly recommended to update liblz4 to v1.9.2 or better.
+ *        If this can't be done or ensured,
+ *        the receiving decompression function should provide
+ *        a dstCapacity which is > decompressedSize, by at least 1 byte.
+ *        See https://github.com/lz4/lz4/issues/859 for details
+ */
+LZ4LIB_API int LZ4_compress_destSize (const char* src, char* dst, int* srcSizePtr, int targetDstSize);
+
+
+/*! LZ4_decompress_safe_partial() :
+ *  Decompress an LZ4 compressed block, of size 'srcSize' at position 'src',
+ *  into destination buffer 'dst' of size 'dstCapacity'.
+ *  Up to 'targetOutputSize' bytes will be decoded.
+ *  The function stops decoding on reaching this objective.
+ *  This can be useful to boost performance
+ *  whenever only the beginning of a block is required.
+ *
+ * @return : the number of bytes decoded in `dst` (necessarily <= targetOutputSize)
+ *           If source stream is detected malformed, function returns a negative result.
+ *
+ *  Note 1 : @return can be < targetOutputSize, if compressed block contains less data.
+ *
+ *  Note 2 : targetOutputSize must be <= dstCapacity
+ *
+ *  Note 3 : this function effectively stops decoding on reaching targetOutputSize,
+ *           so dstCapacity is kind of redundant.
+ *           This is because in older versions of this function,
+ *           decoding operation would still write complete sequences.
+ *           Therefore, there was no guarantee that it would stop writing at exactly targetOutputSize,
+ *           it could write more bytes, though only up to dstCapacity.
+ *           Some "margin" used to be required for this operation to work properly.
+ *           Thankfully, this is no longer necessary.
+ *           The function nonetheless keeps the same signature, in an effort to preserve API compatibility.
+ *
+ *  Note 4 : If srcSize is the exact size of the block,
+ *           then targetOutputSize can be any value,
+ *           including larger than the block's decompressed size.
+ *           The function will, at most, generate block's decompressed size.
+ *
+ *  Note 5 : If srcSize is _larger_ than block's compressed size,
+ *           then targetOutputSize **MUST** be <= block's decompressed size.
+ *           Otherwise, *silent corruption will occur*.
+ */
+LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcSize, int targetOutputSize, int dstCapacity);
+
+
+/*-*********************************************
+*  Streaming Compression Functions
+***********************************************/
+typedef union LZ4_stream_u LZ4_stream_t;  /* incomplete type (defined later) */
+
+LZ4LIB_API LZ4_stream_t* LZ4_createStream(void);
+LZ4LIB_API int           LZ4_freeStream (LZ4_stream_t* streamPtr);
+
+/*! LZ4_resetStream_fast() : v1.9.0+
+ *  Use this to prepare an LZ4_stream_t for a new chain of dependent blocks
+ *  (e.g., LZ4_compress_fast_continue()).
+ *
+ *  An LZ4_stream_t must be initialized once before usage.
+ *  This is automatically done when created by LZ4_createStream().
+ *  However, should the LZ4_stream_t be simply declared on stack (for example),
+ *  it's necessary to initialize it first, using LZ4_initStream().
+ *
+ *  After init, start any new stream with LZ4_resetStream_fast().
+ *  A same LZ4_stream_t can be re-used multiple times consecutively
+ *  and compress multiple streams,
+ *  provided that it starts each new stream with LZ4_resetStream_fast().
+ *
+ *  LZ4_resetStream_fast() is much faster than LZ4_initStream(),
+ *  but is not compatible with memory regions containing garbage data.
+ *
+ *  Note: it's only useful to call LZ4_resetStream_fast()
+ *        in the context of streaming compression.
+ *        The *extState* functions perform their own resets.
+ *        Invoking LZ4_resetStream_fast() before is redundant, and even counterproductive.
+ */
+LZ4LIB_API void LZ4_resetStream_fast (LZ4_stream_t* streamPtr);
+
+/*! LZ4_loadDict() :
+ *  Use this function to reference a static dictionary into LZ4_stream_t.
+ *  The dictionary must remain available during compression.
+ *  LZ4_loadDict() triggers a reset, so any previous data will be forgotten.
+ *  The same dictionary will have to be loaded on decompression side for successful decoding.
+ *  Dictionary are useful for better compression of small data (KB range).
+ *  While LZ4 accept any input as dictionary,
+ *  results are generally better when using Zstandard's Dictionary Builder.
+ *  Loading a size of 0 is allowed, and is the same as reset.
+ * @return : loaded dictionary size, in bytes (necessarily <= 64 KB)
+ */
+LZ4LIB_API int LZ4_loadDict (LZ4_stream_t* streamPtr, const char* dictionary, int dictSize);
+
+/*! LZ4_compress_fast_continue() :
+ *  Compress 'src' content using data from previously compressed blocks, for better compression ratio.
+ * 'dst' buffer must be already allocated.
+ *  If dstCapacity >= LZ4_compressBound(srcSize), compression is guaranteed to succeed, and runs faster.
+ *
+ * @return : size of compressed block
+ *           or 0 if there is an error (typically, cannot fit into 'dst').
+ *
+ *  Note 1 : Each invocation to LZ4_compress_fast_continue() generates a new block.
+ *           Each block has precise boundaries.
+ *           Each block must be decompressed separately, calling LZ4_decompress_*() with relevant metadata.
+ *           It's not possible to append blocks together and expect a single invocation of LZ4_decompress_*() to decompress them together.
+ *
+ *  Note 2 : The previous 64KB of source data is __assumed__ to remain present, unmodified, at same address in memory !
+ *
+ *  Note 3 : When input is structured as a double-buffer, each buffer can have any size, including < 64 KB.
+ *           Make sure that buffers are separated, by at least one byte.
+ *           This construction ensures that each block only depends on previous block.
+ *
+ *  Note 4 : If input buffer is a ring-buffer, it can have any size, including < 64 KB.
+ *
+ *  Note 5 : After an error, the stream status is undefined (invalid), it can only be reset or freed.
+ */
+LZ4LIB_API int LZ4_compress_fast_continue (LZ4_stream_t* streamPtr, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+/*! LZ4_saveDict() :
+ *  If last 64KB data cannot be guaranteed to remain available at its current memory location,
+ *  save it into a safer place (char* safeBuffer).
+ *  This is schematically equivalent to a memcpy() followed by LZ4_loadDict(),
+ *  but is much faster, because LZ4_saveDict() doesn't need to rebuild tables.
+ * @return : saved dictionary size in bytes (necessarily <= maxDictSize), or 0 if error.
+ */
+LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int maxDictSize);
+
+
+/*-**********************************************
+*  Streaming Decompression Functions
+*  Bufferless synchronous API
+************************************************/
+typedef union LZ4_streamDecode_u LZ4_streamDecode_t;   /* tracking context */
+
+/*! LZ4_createStreamDecode() and LZ4_freeStreamDecode() :
+ *  creation / destruction of streaming decompression tracking context.
+ *  A tracking context can be re-used multiple times.
+ */
+LZ4LIB_API LZ4_streamDecode_t* LZ4_createStreamDecode(void);
+LZ4LIB_API int                 LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream);
+
+/*! LZ4_setStreamDecode() :
+ *  An LZ4_streamDecode_t context can be allocated once and re-used multiple times.
+ *  Use this function to start decompression of a new stream of blocks.
+ *  A dictionary can optionally be set. Use NULL or size 0 for a reset order.
+ *  Dictionary is presumed stable : it must remain accessible and unmodified during next decompression.
+ * @return : 1 if OK, 0 if error
+ */
+LZ4LIB_API int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize);
+
+/*! LZ4_decoderRingBufferSize() : v1.8.2+
+ *  Note : in a ring buffer scenario (optional),
+ *  blocks are presumed decompressed next to each other
+ *  up to the moment there is not enough remaining space for next block (remainingSize < maxBlockSize),
+ *  at which stage it resumes from beginning of ring buffer.
+ *  When setting such a ring buffer for streaming decompression,
+ *  provides the minimum size of this ring buffer
+ *  to be compatible with any source respecting maxBlockSize condition.
+ * @return : minimum ring buffer size,
+ *           or 0 if there is an error (invalid maxBlockSize).
+ */
+LZ4LIB_API int LZ4_decoderRingBufferSize(int maxBlockSize);
+#define LZ4_DECODER_RING_BUFFER_SIZE(maxBlockSize) (65536 + 14 + (maxBlockSize))  /* for static allocation; maxBlockSize presumed valid */
+
+/*! LZ4_decompress_*_continue() :
+ *  These decoding functions allow decompression of consecutive blocks in "streaming" mode.
+ *  A block is an unsplittable entity, it must be presented entirely to a decompression function.
+ *  Decompression functions only accepts one block at a time.
+ *  The last 64KB of previously decoded data *must* remain available and unmodified at the memory position where they were decoded.
+ *  If less than 64KB of data has been decoded, all the data must be present.
+ *
+ *  Special : if decompression side sets a ring buffer, it must respect one of the following conditions :
+ *  - Decompression buffer size is _at least_ LZ4_decoderRingBufferSize(maxBlockSize).
+ *    maxBlockSize is the maximum size of any single block. It can have any value > 16 bytes.
+ *    In which case, encoding and decoding buffers do not need to be synchronized.
+ *    Actually, data can be produced by any source compliant with LZ4 format specification, and respecting maxBlockSize.
+ *  - Synchronized mode :
+ *    Decompression buffer size is _exactly_ the same as compression buffer size,
+ *    and follows exactly same update rule (block boundaries at same positions),
+ *    and decoding function is provided with exact decompressed size of each block (exception for last block of the stream),
+ *    _then_ decoding & encoding ring buffer can have any size, including small ones ( < 64 KB).
+ *  - Decompression buffer is larger than encoding buffer, by a minimum of maxBlockSize more bytes.
+ *    In which case, encoding and decoding buffers do not need to be synchronized,
+ *    and encoding ring buffer can have any size, including small ones ( < 64 KB).
+ *
+ *  Whenever these conditions are not possible,
+ *  save the last 64KB of decoded data into a safe buffer where it can't be modified during decompression,
+ *  then indicate where this data is saved using LZ4_setStreamDecode(), before decompressing next block.
+*/
+LZ4LIB_API int LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int srcSize, int dstCapacity);
+
+
+/*! LZ4_decompress_*_usingDict() :
+ *  These decoding functions work the same as
+ *  a combination of LZ4_setStreamDecode() followed by LZ4_decompress_*_continue()
+ *  They are stand-alone, and don't need an LZ4_streamDecode_t structure.
+ *  Dictionary is presumed stable : it must remain accessible and unmodified during decompression.
+ *  Performance tip : Decompression speed can be substantially increased
+ *                    when dst == dictStart + dictSize.
+ */
+LZ4LIB_API int LZ4_decompress_safe_usingDict (const char* src, char* dst, int srcSize, int dstCapcity, const char* dictStart, int dictSize);
+
+#endif /* LZ4_H_2983827168210 */
+
+
+/*^*************************************
+ * !!!!!!   STATIC LINKING ONLY   !!!!!!
+ ***************************************/
+
+/*-****************************************************************************
+ * Experimental section
+ *
+ * Symbols declared in this section must be considered unstable. Their
+ * signatures or semantics may change, or they may be removed altogether in the
+ * future. They are therefore only safe to depend on when the caller is
+ * statically linked against the library.
+ *
+ * To protect against unsafe usage, not only are the declarations guarded,
+ * the definitions are hidden by default
+ * when building LZ4 as a shared/dynamic library.
+ *
+ * In order to access these declarations,
+ * define LZ4_STATIC_LINKING_ONLY in your application
+ * before including LZ4's headers.
+ *
+ * In order to make their implementations accessible dynamically, you must
+ * define LZ4_PUBLISH_STATIC_FUNCTIONS when building the LZ4 library.
+ ******************************************************************************/
+
+#ifdef LZ4_STATIC_LINKING_ONLY
+
+#ifndef LZ4_STATIC_3504398509
+#define LZ4_STATIC_3504398509
+
+#ifdef LZ4_PUBLISH_STATIC_FUNCTIONS
+#define LZ4LIB_STATIC_API LZ4LIB_API
+#else
+#define LZ4LIB_STATIC_API
+#endif
+
+
+/*! LZ4_compress_fast_extState_fastReset() :
+ *  A variant of LZ4_compress_fast_extState().
+ *
+ *  Using this variant avoids an expensive initialization step.
+ *  It is only safe to call if the state buffer is known to be correctly initialized already
+ *  (see above comment on LZ4_resetStream_fast() for a definition of "correctly initialized").
+ *  From a high level, the difference is that
+ *  this function initializes the provided state with a call to something like LZ4_resetStream_fast()
+ *  while LZ4_compress_fast_extState() starts with a call to LZ4_resetStream().
+ */
+LZ4LIB_STATIC_API int LZ4_compress_fast_extState_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration);
+
+/*! LZ4_attach_dictionary() :
+ *  This is an experimental API that allows
+ *  efficient use of a static dictionary many times.
+ *
+ *  Rather than re-loading the dictionary buffer into a working context before
+ *  each compression, or copying a pre-loaded dictionary's LZ4_stream_t into a
+ *  working LZ4_stream_t, this function introduces a no-copy setup mechanism,
+ *  in which the working stream references the dictionary stream in-place.
+ *
+ *  Several assumptions are made about the state of the dictionary stream.
+ *  Currently, only streams which have been prepared by LZ4_loadDict() should
+ *  be expected to work.
+ *
+ *  Alternatively, the provided dictionaryStream may be NULL,
+ *  in which case any existing dictionary stream is unset.
+ *
+ *  If a dictionary is provided, it replaces any pre-existing stream history.
+ *  The dictionary contents are the only history that can be referenced and
+ *  logically immediately precede the data compressed in the first subsequent
+ *  compression call.
+ *
+ *  The dictionary will only remain attached to the working stream through the
+ *  first compression call, at the end of which it is cleared. The dictionary
+ *  stream (and source buffer) must remain in-place / accessible / unchanged
+ *  through the completion of the first compression call on the stream.
+ */
+LZ4LIB_STATIC_API void LZ4_attach_dictionary(LZ4_stream_t* workingStream, const LZ4_stream_t* dictionaryStream);
+
+
+/*! In-place compression and decompression
+ *
+ * It's possible to have input and output sharing the same buffer,
+ * for highly contrained memory environments.
+ * In both cases, it requires input to lay at the end of the buffer,
+ * and decompression to start at beginning of the buffer.
+ * Buffer size must feature some margin, hence be larger than final size.
+ *
+ * |<------------------------buffer--------------------------------->|
+ *                             |<-----------compressed data--------->|
+ * |<-----------decompressed size------------------>|
+ *                                                  |<----margin---->|
+ *
+ * This technique is more useful for decompression,
+ * since decompressed size is typically larger,
+ * and margin is short.
+ *
+ * In-place decompression will work inside any buffer
+ * which size is >= LZ4_DECOMPRESS_INPLACE_BUFFER_SIZE(decompressedSize).
+ * This presumes that decompressedSize > compressedSize.
+ * Otherwise, it means compression actually expanded data,
+ * and it would be more efficient to store such data with a flag indicating it's not compressed.
+ * This can happen when data is not compressible (already compressed, or encrypted).
+ *
+ * For in-place compression, margin is larger, as it must be able to cope with both
+ * history preservation, requiring input data to remain unmodified up to LZ4_DISTANCE_MAX,
+ * and data expansion, which can happen when input is not compressible.
+ * As a consequence, buffer size requirements are much higher,
+ * and memory savings offered by in-place compression are more limited.
+ *
+ * There are ways to limit this cost for compression :
+ * - Reduce history size, by modifying LZ4_DISTANCE_MAX.
+ *   Note that it is a compile-time constant, so all compressions will apply this limit.
+ *   Lower values will reduce compression ratio, except when input_size < LZ4_DISTANCE_MAX,
+ *   so it's a reasonable trick when inputs are known to be small.
+ * - Require the compressor to deliver a "maximum compressed size".
+ *   This is the `dstCapacity` parameter in `LZ4_compress*()`.
+ *   When this size is < LZ4_COMPRESSBOUND(inputSize), then compression can fail,
+ *   in which case, the return code will be 0 (zero).
+ *   The caller must be ready for these cases to happen,
+ *   and typically design a backup scheme to send data uncompressed.
+ * The combination of both techniques can significantly reduce
+ * the amount of margin required for in-place compression.
+ *
+ * In-place compression can work in any buffer
+ * which size is >= (maxCompressedSize)
+ * with maxCompressedSize == LZ4_COMPRESSBOUND(srcSize) for guaranteed compression success.
+ * LZ4_COMPRESS_INPLACE_BUFFER_SIZE() depends on both maxCompressedSize and LZ4_DISTANCE_MAX,
+ * so it's possible to reduce memory requirements by playing with them.
+ */
+
+#define LZ4_DECOMPRESS_INPLACE_MARGIN(compressedSize)          (((compressedSize) >> 8) + 32)
+#define LZ4_DECOMPRESS_INPLACE_BUFFER_SIZE(decompressedSize)   ((decompressedSize) + LZ4_DECOMPRESS_INPLACE_MARGIN(decompressedSize))  /**< note: presumes that compressedSize < decompressedSize. note2: margin is overestimated a bit, since it could use compressedSize instead */
+
+#ifndef LZ4_DISTANCE_MAX   /* history window size; can be user-defined at compile time */
+#  define LZ4_DISTANCE_MAX 65535   /* set to maximum value by default */
+#endif
+
+#define LZ4_COMPRESS_INPLACE_MARGIN                           (LZ4_DISTANCE_MAX + 32)   /* LZ4_DISTANCE_MAX can be safely replaced by srcSize when it's smaller */
+#define LZ4_COMPRESS_INPLACE_BUFFER_SIZE(maxCompressedSize)   ((maxCompressedSize) + LZ4_COMPRESS_INPLACE_MARGIN)  /**< maxCompressedSize is generally LZ4_COMPRESSBOUND(inputSize), but can be set to any lower value, with the risk that compression can fail (return code 0(zero)) */
+
+#endif   /* LZ4_STATIC_3504398509 */
+#endif   /* LZ4_STATIC_LINKING_ONLY */
+
+
+
+#ifndef LZ4_H_98237428734687
+#define LZ4_H_98237428734687
+
+/*-************************************************************
+ *  Private Definitions
+ **************************************************************
+ * Do not use these definitions directly.
+ * They are only exposed to allow static allocation of `LZ4_stream_t` and `LZ4_streamDecode_t`.
+ * Accessing members will expose user code to API and/or ABI break in future versions of the library.
+ **************************************************************/
+#define LZ4_HASHLOG   (LZ4_MEMORY_USAGE-2)
+#define LZ4_HASHTABLESIZE (1 << LZ4_MEMORY_USAGE)
+#define LZ4_HASH_SIZE_U32 (1 << LZ4_HASHLOG)       /* required as macro for static allocation */
+
+#if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */)
+# include <stdint.h>
+  typedef  int8_t  LZ4_i8;
+  typedef uint8_t  LZ4_byte;
+  typedef uint16_t LZ4_u16;
+  typedef uint32_t LZ4_u32;
+#else
+  typedef   signed char  LZ4_i8;
+  typedef unsigned char  LZ4_byte;
+  typedef unsigned short LZ4_u16;
+  typedef unsigned int   LZ4_u32;
+#endif
+
+typedef struct LZ4_stream_t_internal LZ4_stream_t_internal;
+struct LZ4_stream_t_internal {
+    LZ4_u32 hashTable[LZ4_HASH_SIZE_U32];
+    LZ4_u32 currentOffset;
+    LZ4_u32 tableType;
+    const LZ4_byte* dictionary;
+    const LZ4_stream_t_internal* dictCtx;
+    LZ4_u32 dictSize;
+};
+
+typedef struct {
+    const LZ4_byte* externalDict;
+    size_t extDictSize;
+    const LZ4_byte* prefixEnd;
+    size_t prefixSize;
+} LZ4_streamDecode_t_internal;
+
+
+/*! LZ4_stream_t :
+ *  Do not use below internal definitions directly !
+ *  Declare or allocate an LZ4_stream_t instead.
+ *  LZ4_stream_t can also be created using LZ4_createStream(), which is recommended.
+ *  The structure definition can be convenient for static allocation
+ *  (on stack, or as part of larger structure).
+ *  Init this structure with LZ4_initStream() before first use.
+ *  note : only use this definition in association with static linking !
+ *  this definition is not API/ABI safe, and may change in future versions.
+ */
+#define LZ4_STREAMSIZE       16416  /* static size, for inter-version compatibility */
+#define LZ4_STREAMSIZE_VOIDP (LZ4_STREAMSIZE / sizeof(void*))
+union LZ4_stream_u {
+    void* table[LZ4_STREAMSIZE_VOIDP];
+    LZ4_stream_t_internal internal_donotuse;
+}; /* previously typedef'd to LZ4_stream_t */
+
+
+/*! LZ4_initStream() : v1.9.0+
+ *  An LZ4_stream_t structure must be initialized at least once.
+ *  This is automatically done when invoking LZ4_createStream(),
+ *  but it's not when the structure is simply declared on stack (for example).
+ *
+ *  Use LZ4_initStream() to properly initialize a newly declared LZ4_stream_t.
+ *  It can also initialize any arbitrary buffer of sufficient size,
+ *  and will @return a pointer of proper type upon initialization.
+ *
+ *  Note : initialization fails if size and alignment conditions are not respected.
+ *         In which case, the function will @return NULL.
+ *  Note2: An LZ4_stream_t structure guarantees correct alignment and size.
+ *  Note3: Before v1.9.0, use LZ4_resetStream() instead
+ */
+LZ4LIB_API LZ4_stream_t* LZ4_initStream (void* buffer, size_t size);
+
+
+/*! LZ4_streamDecode_t :
+ *  information structure to track an LZ4 stream during decompression.
+ *  init this structure  using LZ4_setStreamDecode() before first use.
+ *  note : only use in association with static linking !
+ *         this definition is not API/ABI safe,
+ *         and may change in a future version !
+ */
+#define LZ4_STREAMDECODESIZE_U64 (4 + ((sizeof(void*)==16) ? 2 : 0) /*AS-400*/ )
+#define LZ4_STREAMDECODESIZE     (LZ4_STREAMDECODESIZE_U64 * sizeof(unsigned long long))
+union LZ4_streamDecode_u {
+    unsigned long long table[LZ4_STREAMDECODESIZE_U64];
+    LZ4_streamDecode_t_internal internal_donotuse;
+} ;   /* previously typedef'd to LZ4_streamDecode_t */
+
+
+
+/*-************************************
+*  Obsolete Functions
+**************************************/
+
+/*! Deprecation warnings
+ *
+ *  Deprecated functions make the compiler generate a warning when invoked.
+ *  This is meant to invite users to update their source code.
+ *  Should deprecation warnings be a problem, it is generally possible to disable them,
+ *  typically with -Wno-deprecated-declarations for gcc
+ *  or _CRT_SECURE_NO_WARNINGS in Visual.
+ *
+ *  Another method is to define LZ4_DISABLE_DEPRECATE_WARNINGS
+ *  before including the header file.
+ */
+#ifdef LZ4_DISABLE_DEPRECATE_WARNINGS
+#  define LZ4_DEPRECATED(message)   /* disable deprecation warnings */
+#else
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define LZ4_DEPRECATED(message) [[deprecated(message)]]
+#  elif defined(_MSC_VER)
+#    define LZ4_DEPRECATED(message) __declspec(deprecated(message))
+#  elif defined(__clang__) || (defined(__GNUC__) && (__GNUC__ * 10 + __GNUC_MINOR__ >= 45))
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated(message)))
+#  elif defined(__GNUC__) && (__GNUC__ * 10 + __GNUC_MINOR__ >= 31)
+#    define LZ4_DEPRECATED(message) __attribute__((deprecated))
+#  else
+#    pragma message("WARNING: LZ4_DEPRECATED needs custom implementation for this compiler")
+#    define LZ4_DEPRECATED(message)   /* disabled */
+#  endif
+#endif /* LZ4_DISABLE_DEPRECATE_WARNINGS */
+
+/*! Obsolete compression functions (since v1.7.3) */
+LZ4_DEPRECATED("use LZ4_compress_default() instead")       LZ4LIB_API int LZ4_compress               (const char* src, char* dest, int srcSize);
+LZ4_DEPRECATED("use LZ4_compress_default() instead")       LZ4LIB_API int LZ4_compress_limitedOutput (const char* src, char* dest, int srcSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_withState               (void* state, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_continue                (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize);
+LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_limitedOutput_continue  (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize);
+
+/*! Obsolete decompression functions (since v1.8.0) */
+LZ4_DEPRECATED("use LZ4_decompress_fast() instead") LZ4LIB_API int LZ4_uncompress (const char* source, char* dest, int outputSize);
+LZ4_DEPRECATED("use LZ4_decompress_safe() instead") LZ4LIB_API int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize);
+
+/* Obsolete streaming functions (since v1.7.0)
+ * degraded functionality; do not use!
+ *
+ * In order to perform streaming compression, these functions depended on data
+ * that is no longer tracked in the state. They have been preserved as well as
+ * possible: using them will still produce a correct output. However, they don't
+ * actually retain any history between compression calls. The compression ratio
+ * achieved will therefore be no better than compressing each chunk
+ * independently.
+ */
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API void* LZ4_create (char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API int   LZ4_sizeofStreamState(void);
+LZ4_DEPRECATED("Use LZ4_resetStream() instead")  LZ4LIB_API int   LZ4_resetStreamState(void* state, char* inputBuffer);
+LZ4_DEPRECATED("Use LZ4_saveDict() instead")     LZ4LIB_API char* LZ4_slideInputBuffer (void* state);
+
+/*! Obsolete streaming decoding functions (since v1.7.0) */
+LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") LZ4LIB_API int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize);
+LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") LZ4LIB_API int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize);
+
+/*! Obsolete LZ4_decompress_fast variants (since v1.9.0) :
+ *  These functions used to be faster than LZ4_decompress_safe(),
+ *  but this is no longer the case. They are now slower.
+ *  This is because LZ4_decompress_fast() doesn't know the input size,
+ *  and therefore must progress more cautiously into the input buffer to not read beyond the end of block.
+ *  On top of that `LZ4_decompress_fast()` is not protected vs malformed or malicious inputs, making it a security liability.
+ *  As a consequence, LZ4_decompress_fast() is strongly discouraged, and deprecated.
+ *
+ *  The last remaining LZ4_decompress_fast() specificity is that
+ *  it can decompress a block without knowing its compressed size.
+ *  Such functionality can be achieved in a more secure manner
+ *  by employing LZ4_decompress_safe_partial().
+ *
+ *  Parameters:
+ *  originalSize : is the uncompressed size to regenerate.
+ *                 `dst` must be already allocated, its size must be >= 'originalSize' bytes.
+ * @return : number of bytes read from source buffer (== compressed size).
+ *           The function expects to finish at block's end exactly.
+ *           If the source stream is detected malformed, the function stops decoding and returns a negative result.
+ *  note : LZ4_decompress_fast*() requires originalSize. Thanks to this information, it never writes past the output buffer.
+ *         However, since it doesn't know its 'src' size, it may read an unknown amount of input, past input buffer bounds.
+ *         Also, since match offsets are not validated, match reads from 'src' may underflow too.
+ *         These issues never happen if input (compressed) data is correct.
+ *         But they may happen if input data is invalid (error or intentional tampering).
+ *         As a consequence, use these functions in trusted environments with trusted data **only**.
+ */
+LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe() instead")
+LZ4LIB_API int LZ4_decompress_fast (const char* src, char* dst, int originalSize);
+LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe_continue() instead")
+LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int originalSize);
+LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe_usingDict() instead")
+LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int originalSize, const char* dictStart, int dictSize);
+
+/*! LZ4_resetStream() :
+ *  An LZ4_stream_t structure must be initialized at least once.
+ *  This is done with LZ4_initStream(), or LZ4_resetStream().
+ *  Consider switching to LZ4_initStream(),
+ *  invoking LZ4_resetStream() will trigger deprecation warnings in the future.
+ */
+LZ4LIB_API void LZ4_resetStream (LZ4_stream_t* streamPtr);
+
+
+#endif /* LZ4_H_98237428734687 */
+
+
+#if defined (__cplusplus)
+}
+#endif