ionoscloud 6.0.0.beta.1 → 6.0.0

data/lib/ionoscloud/models/network_load_balancer_forwarding_rule_health_check.rb

@@ -1,12 +1,12 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
 The version of the OpenAPI document: 6.0
 
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.1-SNAPSHOT
+OpenAPI Generator version: 5.2.1-SNAPSHOT
 
 =end
 
@@ -15,28 +15,32 @@ require 'time'
 
 module Ionoscloud
   class NetworkLoadBalancerForwardingRuleHealthCheck
+  
     # ClientTimeout is expressed in milliseconds. This inactivity timeout applies when the client is expected to acknowledge or send data. If unset the default of 50 seconds will be used.
     attr_accessor :client_timeout
 
-    # It specifies the time (in milliseconds) for a target VM in this pool to answer the check. If a target VM has CheckInterval set and CheckTimeout is set too, then the smaller value of the two is used after the TCP connection is established.
-    attr_accessor :check_timeout
 
     # It specifies the maximum time (in milliseconds) to wait for a connection attempt to a target VM to succeed. If unset, the default of 5 seconds will be used.
     attr_accessor :connect_timeout
 
+
     # TargetTimeout specifies the maximum inactivity time (in milliseconds) on the target VM side. If unset, the default of 50 seconds will be used.
     attr_accessor :target_timeout
 
+
     # Retries specifies the number of retries to perform on a target VM after a connection failure. If unset, the default value of 3 will be used. (valid range: [0, 65535])
     attr_accessor :retries
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
+        
         :'client_timeout' => :'clientTimeout',
-        :'check_timeout' => :'checkTimeout',
+
         :'connect_timeout' => :'connectTimeout',
+
         :'target_timeout' => :'targetTimeout',
+
         :'retries' => :'retries'
       }
     end
@@ -49,10 +53,13 @@ module Ionoscloud
     # Attribute type mapping.
     def self.openapi_types
       {
+        
         :'client_timeout' => :'Integer',
-        :'check_timeout' => :'Integer',
+
         :'connect_timeout' => :'Integer',
+
         :'target_timeout' => :'Integer',
+
         :'retries' => :'Integer'
       }
     end
@@ -60,6 +67,10 @@ module Ionoscloud
     # List of attributes with nullable: true
     def self.openapi_nullable
       Set.new([
+        
+
+
+
       ])
     end
 
@@ -77,23 +88,23 @@ module Ionoscloud
         end
         h[k.to_sym] = v
       }
+      
 
       if attributes.key?(:'client_timeout')
         self.client_timeout = attributes[:'client_timeout']
       end
 
-      if attributes.key?(:'check_timeout')
-        self.check_timeout = attributes[:'check_timeout']
-      end
 
       if attributes.key?(:'connect_timeout')
         self.connect_timeout = attributes[:'connect_timeout']
       end
 
+
       if attributes.key?(:'target_timeout')
         self.target_timeout = attributes[:'target_timeout']
       end
 
+
       if attributes.key?(:'retries')
         self.retries = attributes[:'retries']
       end
@@ -103,25 +114,36 @@ module Ionoscloud
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
+      
+
+
+
       invalid_properties
     end
 
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
+      
+
+
+
       true
     end
 
+    
+
+
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          client_timeout == o.client_timeout &&
-          check_timeout == o.check_timeout &&
-          connect_timeout == o.connect_timeout &&
-          target_timeout == o.target_timeout &&
-          retries == o.retries
+        client_timeout == o.client_timeout &&
+        connect_timeout == o.connect_timeout &&
+        target_timeout == o.target_timeout &&
+        retries == o.retries
     end
 
     # @see the `==` method
@@ -133,7 +155,7 @@ module Ionoscloud
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [client_timeout, check_timeout, connect_timeout, target_timeout, retries].hash
+      [client_timeout, connect_timeout, target_timeout, retries].hash
     end
 
     # Builds the object from hash
@@ -253,5 +275,7 @@ module Ionoscloud
         value
       end
     end
+
   end
+
 end

data/lib/ionoscloud/models/network_load_balancer_forwarding_rule_properties.rb

@@ -1,12 +1,12 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
 The version of the OpenAPI document: 6.0
 
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.1-SNAPSHOT
+OpenAPI Generator version: 5.2.1-SNAPSHOT
 
 =end
 
@@ -15,24 +15,31 @@ require 'time'
 
 module Ionoscloud
   class NetworkLoadBalancerForwardingRuleProperties
-    # A name of that Network Load Balancer forwarding rule
+  
+    # The name of the Network Load Balancer forwarding rule.
     attr_accessor :name
 
+
     # Algorithm for the balancing.
     attr_accessor :algorithm
 
+
     # Protocol of the balancing.
     attr_accessor :protocol
 
+
     # Listening IP. (inbound)
     attr_accessor :listener_ip
 
+
     # Listening port number. (inbound) (range: 1 to 65535)
     attr_accessor :listener_port
 
+
     attr_accessor :health_check
 
-    # Array of items in that collection
+
+    # Array of items in that collection.
     attr_accessor :targets
 
     class EnumAttributeValidator
@@ -60,12 +67,19 @@ module Ionoscloud
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
+        
         :'name' => :'name',
+
         :'algorithm' => :'algorithm',
+
         :'protocol' => :'protocol',
+
         :'listener_ip' => :'listenerIp',
+
         :'listener_port' => :'listenerPort',
+
         :'health_check' => :'healthCheck',
+
         :'targets' => :'targets'
       }
     end
@@ -78,12 +92,19 @@ module Ionoscloud
     # Attribute type mapping.
     def self.openapi_types
       {
+        
         :'name' => :'String',
+
         :'algorithm' => :'String',
+
         :'protocol' => :'String',
+
         :'listener_ip' => :'String',
+
         :'listener_port' => :'Integer',
+
         :'health_check' => :'NetworkLoadBalancerForwardingRuleHealthCheck',
+
         :'targets' => :'Array<NetworkLoadBalancerForwardingRuleTarget>'
       }
     end
@@ -91,6 +112,13 @@ module Ionoscloud
     # List of attributes with nullable: true
     def self.openapi_nullable
       Set.new([
+        
+
+
+
+
+
+
       ])
     end
 
@@ -108,35 +136,40 @@ module Ionoscloud
         end
         h[k.to_sym] = v
       }
+      
 
       if attributes.key?(:'name')
         self.name = attributes[:'name']
       end
 
+
       if attributes.key?(:'algorithm')
         self.algorithm = attributes[:'algorithm']
       end
 
+
       if attributes.key?(:'protocol')
         self.protocol = attributes[:'protocol']
       end
 
+
       if attributes.key?(:'listener_ip')
         self.listener_ip = attributes[:'listener_ip']
       end
 
+
       if attributes.key?(:'listener_port')
         self.listener_port = attributes[:'listener_port']
       end
 
+
       if attributes.key?(:'health_check')
         self.health_check = attributes[:'health_check']
       end
 
-      if attributes.key?(:'targets')
-        if (value = attributes[:'targets']).is_a?(Array)
-          self.targets = value
-        end
+
+      if attributes.key?(:'targets') && (value = attributes[:'targets']).is_a?(Array)
+        self.targets = value
       end
     end
 
@@ -144,26 +177,33 @@ module Ionoscloud
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
+      
       if @name.nil?
         invalid_properties.push('invalid value for "name", name cannot be nil.')
       end
 
+
       if @algorithm.nil?
         invalid_properties.push('invalid value for "algorithm", algorithm cannot be nil.')
       end
 
+
       if @protocol.nil?
         invalid_properties.push('invalid value for "protocol", protocol cannot be nil.')
       end
 
+
       if @listener_ip.nil?
         invalid_properties.push('invalid value for "listener_ip", listener_ip cannot be nil.')
       end
 
+
       if @listener_port.nil?
         invalid_properties.push('invalid value for "listener_port", listener_port cannot be nil.')
       end
 
+
+
       if @targets.nil?
         invalid_properties.push('invalid value for "targets", targets cannot be nil.')
       end
@@ -174,19 +214,28 @@ module Ionoscloud
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
+      
       return false if @name.nil?
+
       return false if @algorithm.nil?
       algorithm_validator = EnumAttributeValidator.new('String', ["ROUND_ROBIN", "LEAST_CONNECTION", "RANDOM", "SOURCE_IP"])
       return false unless algorithm_validator.valid?(@algorithm)
+
       return false if @protocol.nil?
-      protocol_validator = EnumAttributeValidator.new('String', ["TCP"])
+      protocol_validator = EnumAttributeValidator.new('String', ["HTTP", "TCP"])
       return false unless protocol_validator.valid?(@protocol)
+
       return false if @listener_ip.nil?
+
       return false if @listener_port.nil?
+
+
       return false if @targets.nil?
       true
     end
 
+    
+
     # Custom attribute writer method checking allowed values (enum).
     # @param [Object] algorithm Object to be assigned
     def algorithm=(algorithm)
@@ -197,28 +246,33 @@ module Ionoscloud
       @algorithm = algorithm
     end
 
+
     # Custom attribute writer method checking allowed values (enum).
     # @param [Object] protocol Object to be assigned
     def protocol=(protocol)
-      validator = EnumAttributeValidator.new('String', ["TCP"])
+      validator = EnumAttributeValidator.new('String', ["HTTP", "TCP"])
       unless validator.valid?(protocol)
         fail ArgumentError, "invalid value for \"protocol\", must be one of #{validator.allowable_values}."
       end
       @protocol = protocol
     end
 
+
+
+
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          name == o.name &&
-          algorithm == o.algorithm &&
-          protocol == o.protocol &&
-          listener_ip == o.listener_ip &&
-          listener_port == o.listener_port &&
-          health_check == o.health_check &&
-          targets == o.targets
+        name == o.name &&
+        algorithm == o.algorithm &&
+        protocol == o.protocol &&
+        listener_ip == o.listener_ip &&
+        listener_port == o.listener_port &&
+        health_check == o.health_check &&
+        targets == o.targets
     end
 
     # @see the `==` method
@@ -350,5 +404,7 @@ module Ionoscloud
         value
       end
     end
+
   end
+
 end

data/lib/ionoscloud/models/network_load_balancer_forwarding_rule_put.rb

@@ -1,12 +1,12 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
 The version of the OpenAPI document: 6.0
 
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.1-SNAPSHOT
+OpenAPI Generator version: 5.2.1-SNAPSHOT
 
 =end
 
@@ -15,23 +15,31 @@ require 'time'
 
 module Ionoscloud
   class NetworkLoadBalancerForwardingRulePut
-    # The resource's unique identifier
+  
+    # The resource's unique identifier.
     attr_accessor :id
 
-    # The type of object that has been created
+
+    # The type of object that has been created.
     attr_accessor :type
 
-    # URL to the object representation (absolute path)
+
+    # URL to the object representation (absolute path).
     attr_accessor :href
 
+
     attr_accessor :properties
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
+        
         :'id' => :'id',
+
         :'type' => :'type',
+
         :'href' => :'href',
+
         :'properties' => :'properties'
       }
     end
@@ -44,9 +52,13 @@ module Ionoscloud
     # Attribute type mapping.
     def self.openapi_types
       {
+        
         :'id' => :'String',
+
         :'type' => :'Type',
+
         :'href' => :'String',
+
         :'properties' => :'NetworkLoadBalancerForwardingRuleProperties'
       }
     end
@@ -54,6 +66,10 @@ module Ionoscloud
     # List of attributes with nullable: true
     def self.openapi_nullable
       Set.new([
+        
+
+
+
       ])
     end
 
@@ -71,19 +87,23 @@ module Ionoscloud
         end
         h[k.to_sym] = v
       }
+      
 
       if attributes.key?(:'id')
         self.id = attributes[:'id']
       end
 
+
       if attributes.key?(:'type')
         self.type = attributes[:'type']
       end
 
+
       if attributes.key?(:'href')
         self.href = attributes[:'href']
       end
 
+
       if attributes.key?(:'properties')
         self.properties = attributes[:'properties']
       end
@@ -93,6 +113,10 @@ module Ionoscloud
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
+      
+
+
+
       if @properties.nil?
         invalid_properties.push('invalid value for "properties", properties cannot be nil.')
       end
@@ -103,19 +127,27 @@ module Ionoscloud
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
+      
+
+
+
       return false if @properties.nil?
       true
     end
 
+    
+
+
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          id == o.id &&
-          type == o.type &&
-          href == o.href &&
-          properties == o.properties
+        id == o.id &&
+        type == o.type &&
+        href == o.href &&
+        properties == o.properties
     end
 
     # @see the `==` method
@@ -247,5 +279,7 @@ module Ionoscloud
         value
       end
     end
+
   end
+
 end