ionoscloud 5.1.1 → 6.0.0.beta.4

data/lib/ionoscloud/models/nic_properties.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT
@@ -33,8 +33,36 @@ module Ionoscloud
     # Activate or deactivate the firewall. By default an active firewall without any defined rules will block all incoming network traffic except for the firewall rules that explicitly allows certain protocols, ip addresses and ports.
     attr_accessor :firewall_active
 
-    # Indicates if NAT is enabled on this NIC. This is now deprecated.
-    attr_accessor :nat
+    # The type of firewall rules that will be allowed on the NIC. If it is not specified it will take the default value INGRESS
+    attr_accessor :firewall_type
+
+    # The Logical Unit Number (LUN) of the storage volume. Null if this NIC was create from CloudAPI and no DCD changes were done on the Datacenter.
+    attr_accessor :device_number
+
+    # The PCI slot number of the Nic.
+    attr_accessor :pci_slot
+
+    class EnumAttributeValidator
+      attr_reader :datatype
+      attr_reader :allowable_values
+
+      def initialize(datatype, allowable_values)
+        @allowable_values = allowable_values.map do |value|
+          case datatype.to_s
+          when /Integer/i
+            value.to_i
+          when /Float/i
+            value.to_f
+          else
+            value
+          end
+        end
+      end
+
+      def valid?(value)
+        !value || allowable_values.include?(value)
+      end
+    end
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
@@ -45,7 +73,9 @@ module Ionoscloud
         :'dhcp' => :'dhcp',
         :'lan' => :'lan',
         :'firewall_active' => :'firewallActive',
-        :'nat' => :'nat'
+        :'firewall_type' => :'firewallType',
+        :'device_number' => :'deviceNumber',
+        :'pci_slot' => :'pciSlot'
       }
     end
 
@@ -63,7 +93,9 @@ module Ionoscloud
         :'dhcp' => :'Boolean',
         :'lan' => :'Integer',
         :'firewall_active' => :'Boolean',
-        :'nat' => :'Boolean'
+        :'firewall_type' => :'String',
+        :'device_number' => :'Integer',
+        :'pci_slot' => :'Integer'
       }
     end
 
@@ -114,8 +146,16 @@ module Ionoscloud
         self.firewall_active = attributes[:'firewall_active']
       end
 
-      if attributes.key?(:'nat')
-        self.nat = attributes[:'nat']
+      if attributes.key?(:'firewall_type')
+        self.firewall_type = attributes[:'firewall_type']
+      end
+
+      if attributes.key?(:'device_number')
+        self.device_number = attributes[:'device_number']
+      end
+
+      if attributes.key?(:'pci_slot')
+        self.pci_slot = attributes[:'pci_slot']
       end
     end
 
@@ -134,9 +174,21 @@ module Ionoscloud
     # @return true if the model is valid
     def valid?
       return false if @lan.nil?
+      firewall_type_validator = EnumAttributeValidator.new('String', ["INGRESS", "EGRESS", "BIDIRECTIONAL"])
+      return false unless firewall_type_validator.valid?(@firewall_type)
       true
     end
 
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] firewall_type Object to be assigned
+    def firewall_type=(firewall_type)
+      validator = EnumAttributeValidator.new('String', ["INGRESS", "EGRESS", "BIDIRECTIONAL"])
+      unless validator.valid?(firewall_type)
+        fail ArgumentError, "invalid value for \"firewall_type\", must be one of #{validator.allowable_values}."
+      end
+      @firewall_type = firewall_type
+    end
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)
@@ -148,7 +200,9 @@ module Ionoscloud
           dhcp == o.dhcp &&
           lan == o.lan &&
           firewall_active == o.firewall_active &&
-          nat == o.nat
+          firewall_type == o.firewall_type &&
+          device_number == o.device_number &&
+          pci_slot == o.pci_slot
     end
 
     # @see the `==` method
@@ -160,7 +214,7 @@ module Ionoscloud
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [name, mac, ips, dhcp, lan, firewall_active, nat].hash
+      [name, mac, ips, dhcp, lan, firewall_active, firewall_type, device_number, pci_slot].hash
     end
 
     # Builds the object from hash

data/lib/ionoscloud/models/nic_put.rb

@@ -0,0 +1,253 @@
+=begin
+#CLOUD API
+
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
+
+The version of the OpenAPI document: 6.0-SDK.3
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.1-SNAPSHOT
+
+=end
+
+require 'date'
+require 'time'
+
+module Ionoscloud
+  class NicPut
+    # The resource's unique identifier
+    attr_accessor :id
+
+    # The type of object that has been created
+    attr_accessor :type
+
+    # URL to the object representation (absolute path)
+    attr_accessor :href
+
+    attr_accessor :properties
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'id' => :'id',
+        :'type' => :'type',
+        :'href' => :'href',
+        :'properties' => :'properties'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'id' => :'String',
+        :'type' => :'Type',
+        :'href' => :'String',
+        :'properties' => :'NicProperties'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Ionoscloud::NicPut` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Ionoscloud::NicPut`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.key?(:'type')
+        self.type = attributes[:'type']
+      end
+
+      if attributes.key?(:'href')
+        self.href = attributes[:'href']
+      end
+
+      if attributes.key?(:'properties')
+        self.properties = attributes[:'properties']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @properties.nil?
+        invalid_properties.push('invalid value for "properties", properties cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @properties.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          id == o.id &&
+          type == o.type &&
+          href == o.href &&
+          properties == o.properties
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [id, type, href, properties].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Ionoscloud.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/ionoscloud/models/nics.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/no_state_meta_data.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/pagination_links.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/peer.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/private_cross_connect.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/private_cross_connect_properties.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT
@@ -24,7 +24,7 @@ module Ionoscloud
     # Read-Only attribute. Lists LAN's joined to this private cross connect
     attr_accessor :peers
 
-    # Read-Only attribute. Lists datacenters that can be joined to this private cross connect
+    # Read-Only attribute. Lists data centers that can be joined to this private cross connect
     attr_accessor :connectable_datacenters
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/ionoscloud/models/private_cross_connects.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/{kubernetes_config_properties.rb → remote_console_url.rb}

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT
@@ -14,14 +14,14 @@ require 'date'
 require 'time'
 
 module Ionoscloud
-  class KubernetesConfigProperties
-    # A Kubernetes Config file data
-    attr_accessor :kubeconfig
+  class RemoteConsoleUrl
+    # The remote console url with the jwToken parameter for access
+    attr_accessor :url
 
     # Attribute mapping from ruby-style variable name to JSON key.
     def self.attribute_map
       {
-        :'kubeconfig' => :'kubeconfig'
+        :'url' => :'url'
       }
     end
 
@@ -33,7 +33,7 @@ module Ionoscloud
     # Attribute type mapping.
     def self.openapi_types
       {
-        :'kubeconfig' => :'String'
+        :'url' => :'String'
       }
     end
 
@@ -47,19 +47,19 @@ module Ionoscloud
     # @param [Hash] attributes Model attributes in the form of hash
     def initialize(attributes = {})
       if (!attributes.is_a?(Hash))
-        fail ArgumentError, "The input argument (attributes) must be a hash in `Ionoscloud::KubernetesConfigProperties` initialize method"
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Ionoscloud::RemoteConsoleUrl` initialize method"
       end
 
       # check to see if the attribute exists and convert string to symbol for hash key
       attributes = attributes.each_with_object({}) { |(k, v), h|
         if (!self.class.attribute_map.key?(k.to_sym))
-          fail ArgumentError, "`#{k}` is not a valid attribute in `Ionoscloud::KubernetesConfigProperties`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Ionoscloud::RemoteConsoleUrl`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
         end
         h[k.to_sym] = v
       }
 
-      if attributes.key?(:'kubeconfig')
-        self.kubeconfig = attributes[:'kubeconfig']
+      if attributes.key?(:'url')
+        self.url = attributes[:'url']
       end
     end
 
@@ -81,7 +81,7 @@ module Ionoscloud
     def ==(o)
       return true if self.equal?(o)
       self.class == o.class &&
-          kubeconfig == o.kubeconfig
+          url == o.url
     end
 
     # @see the `==` method
@@ -93,7 +93,7 @@ module Ionoscloud
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [kubeconfig].hash
+      [url].hash
     end
 
     # Builds the object from hash

data/lib/ionoscloud/models/request.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/request_metadata.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/request_properties.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/request_status.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT

data/lib/ionoscloud/models/request_status_metadata.rb

@@ -1,9 +1,9 @@
 =begin
 #CLOUD API
 
-#An enterprise-grade Infrastructure is provided as a Service (IaaS) solution that can be managed through a browser-based \"Data Center Designer\" (DCD) tool or via an easy to use API.   The API allows you to perform a variety of management tasks such as spinning up additional servers, adding volumes, adjusting networking, and so forth. It is designed to allow users to leverage the same power and flexibility found within the DCD visual tool. Both tools are consistent with their concepts and lend well to making the experience smooth and intuitive.
+#IONOS Enterprise-grade Infrastructure as a Service (IaaS) solutions can be managed through the Cloud API, in addition or as an alternative to the \"Data Center Designer\" (DCD) browser-based tool.    Both methods employ consistent concepts and features, deliver similar power and flexibility, and can be used to perform a multitude of management tasks, including adding servers, volumes, configuring networks, and so on.
 
-The version of the OpenAPI document: 5.0
+The version of the OpenAPI document: 6.0-SDK.3
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.1-SNAPSHOT