instructure-redis-store 1.0.0.1.instructure1

data/spec/cache/merb/redis_store_spec.rb

@@ -0,0 +1,143 @@
+require 'spec_helper'
+
+module Merb
+  module Cache
+    describe "Merb::Cache::RedisStore" do
+      before(:each) do
+        @store  = Merb::Cache::RedisStore.new
+        @dstore = Merb::Cache::RedisStore.new :servers => ["redis://127.0.0.1:6380/1", "redis://127.0.0.1:6381/1"]
+        @rabbit = OpenStruct.new :name => "bunny"
+        @white_rabbit = OpenStruct.new :color => "white"
+        with_store_management do |store|
+          store.write "rabbit", @rabbit
+          store.delete "rub-a-dub"
+        end
+      end
+
+      it "should accept connection params" do
+        redis = instantiate_store
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6379 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6379 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1:6380"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1:6380/13"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 13"
+
+        redis = instantiate_store "redis://127.0.0.1:6380/13/theplaylist"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 13 with namespace theplaylist"
+      end
+
+      it "should instantiate a ring" do
+        store = instantiate_store
+        store.should be_kind_of(Redis::Store)
+        store = instantiate_store ["redis://127.0.0.1:6379/0", "redis://127.0.0.1:6379/1"]
+        store.should be_kind_of(Redis::DistributedStore)
+      end
+
+      it "should verify if writable" do
+        with_store_management do |store|
+          store.writable?("rabbit").should be_true
+        end
+      end
+
+      it "should read the data" do
+        with_store_management do |store|
+          store.read("rabbit").should === @rabbit
+        end
+      end
+
+      it "should read raw data" do
+        with_store_management do |store|
+          store.read("rabbit", {}, :raw => true).should == Marshal.dump(@rabbit)
+        end
+      end
+
+      it "should write the data" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit
+          store.read("rabbit").should === @white_rabbit
+        end
+      end
+
+      it "should write raw data" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, {}, :raw => true
+          store.read("rabbit", {}, :raw => true).should == %(#<OpenStruct color="white">)
+        end
+      end
+
+      it "should write the data with expiration time" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, {}, :expires_in => 1.second
+          store.read("rabbit").should === @white_rabbit ; sleep 2
+          store.read("rabbit").should be_nil
+        end
+      end
+
+      it "should not write data if :unless_exist option is true" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, {}, :unless_exist => true
+          store.read("rabbit").should === @rabbit
+        end
+      end
+
+      it "should write all the data" do
+        with_store_management do |store|
+          store.write_all "rabbit", @white_rabbit
+          store.read("rabbit").should === @white_rabbit
+        end
+      end
+
+      it "should fetch data" do
+        with_store_management do |store|
+          store.fetch("rabbit").should == @rabbit
+          store.fetch("rub-a-dub").should be_nil
+          store.fetch("rub-a-dub") { "Flora de Cana" }.should == "Flora de Cana"
+          store.fetch("rub-a-dub").should === "Flora de Cana"
+        end
+      end
+
+      it "should verify existence" do
+        with_store_management do |store|
+          store.exists?("rabbit").should be_true
+          store.exists?("rab-a-dub").should be_false
+        end
+      end
+
+      it "should delete data" do
+        with_store_management do |store|
+          store.delete "rabbit"
+          store.read("rabbit").should be_nil
+        end
+      end
+
+      it "should delete all the data" do
+        with_store_management do |store|
+          store.delete_all
+          store.instance_variable_get(:@data).keys("*").flatten.should be_empty
+        end
+      end
+
+      it "should delete all the data with bang method" do
+        with_store_management do |store|
+          store.delete_all!
+          store.instance_variable_get(:@data).keys("*").flatten.should be_empty
+        end
+      end
+
+      private
+        def instantiate_store(addresses = nil)
+          Merb::Cache::RedisStore.new(:servers => [addresses].flatten).instance_variable_get(:@data)
+        end
+
+        def with_store_management
+          yield @store
+          yield @dstore
+        end
+    end
+  end
+end

data/spec/cache/sinatra/redis_store_spec.rb

@@ -0,0 +1,192 @@
+require 'spec_helper'
+
+class App
+  def initialize
+    @values = {}
+  end
+
+  def set(key, value)
+    @values[key] = value
+  end
+
+  def get(key)
+    @values[key]
+  end
+end
+
+module Sinatra
+  module Cache
+    describe "Sinatra::Cache::RedisStore" do
+      before(:each) do
+        @store  = Sinatra::Cache::RedisStore.new
+        @dstore = Sinatra::Cache::RedisStore.new "redis://127.0.0.1:6380/1", "redis://127.0.0.1:6381/1"
+        @rabbit = OpenStruct.new :name => "bunny"
+        @white_rabbit = OpenStruct.new :color => "white"
+        with_store_management do |store|
+          store.write  "rabbit", @rabbit
+          store.delete "counter"
+          store.delete "rub-a-dub"
+        end
+      end
+
+      it "should register as extension" do
+        app = App.new
+        Sinatra::Cache.register(app)
+        store = app.get(:cache)
+        store.should be_kind_of(RedisStore)
+      end
+
+      it "should accept connection params" do
+        redis = instantiate_store
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6379 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6379 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1:6380"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 0"
+
+        redis = instantiate_store "redis://127.0.0.1:6380/13"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 13"
+
+        redis = instantiate_store "redis://127.0.0.1:6380/13/theplaylist"
+        redis.to_s.should == "Redis Client connected to 127.0.0.1:6380 against DB 13 with namespace theplaylist"
+      end
+
+      it "should instantiate a ring" do
+        store = instantiate_store
+        store.should be_kind_of(Redis::Store)
+        store = instantiate_store ["redis://127.0.0.1:6379/0", "redis://127.0.0.1:6379/1"]
+        store.should be_kind_of(Redis::DistributedStore)
+      end
+
+      it "should read the data" do
+        with_store_management do |store|
+          store.read("rabbit").should === @rabbit
+        end
+      end
+
+      it "should write the data" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit
+          store.read("rabbit").should === @white_rabbit
+        end
+      end
+
+      it "should write the data with expiration time" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, :expires_in => 1.second
+          store.read("rabbit").should === @white_rabbit ; sleep 2
+          store.read("rabbit").should be_nil
+        end
+      end
+
+      it "should not write data if :unless_exist option is true" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, :unless_exist => true
+          store.read("rabbit").should === @rabbit
+        end
+      end
+
+      it "should read raw data" do
+        with_store_management do |store|
+          store.read("rabbit", :raw => true).should == Marshal.dump(@rabbit)
+        end
+      end
+
+      it "should write raw data" do
+        with_store_management do |store|
+          store.write "rabbit", @white_rabbit, :raw => true
+          store.read("rabbit", :raw => true).should == %(#<OpenStruct color="white">)
+        end
+      end
+
+      it "should delete data" do
+        with_store_management do |store|
+          store.delete "rabbit"
+          store.read("rabbit").should be_nil
+        end
+      end
+
+      it "should delete matched data" do
+        with_store_management do |store|
+          store.delete_matched "rabb*"
+          store.read("rabbit").should be_nil
+        end
+      end
+
+      it "should verify existence of an object in the store" do
+        with_store_management do |store|
+          store.exist?("rabbit").should be_true
+          store.exist?("rab-a-dub").should be_false
+        end
+      end
+
+      it "should increment a key" do
+        with_store_management do |store|
+          3.times { store.increment "counter" }
+          store.read("counter", :raw => true).to_i.should == 3
+        end
+      end
+
+      it "should decrement a key" do
+        with_store_management do |store|
+          3.times { store.increment "counter" }
+          2.times { store.decrement "counter" }
+          store.read("counter", :raw => true).to_i.should == 1
+        end
+      end
+
+      it "should increment a key by given value" do
+        with_store_management do |store|
+          store.increment "counter", 3
+          store.read("counter", :raw => true).to_i.should == 3
+        end
+      end
+
+      it "should decrement a key by given value" do
+        with_store_management do |store|
+          3.times { store.increment "counter" }
+          store.decrement "counter", 2
+          store.read("counter", :raw => true).to_i.should == 1
+        end
+      end
+
+      it "should clear the store" do
+        with_store_management do |store|
+          store.clear
+          store.instance_variable_get(:@data).keys("*").flatten.should be_empty
+        end
+      end
+
+      it "should return store stats" do
+        with_store_management do |store|
+          store.stats.should_not be_empty
+        end
+      end
+
+      it "should fetch data" do
+        with_store_management do |store|
+          store.fetch("rabbit").should == @rabbit
+          store.fetch("rub-a-dub").should be_nil
+          store.fetch("rub-a-dub") { "Flora de Cana" }.should == "Flora de Cana"
+          store.fetch("rub-a-dub").should === "Flora de Cana"
+          store.fetch("rabbit", :force => true).should be_nil # force cache miss
+          store.fetch("rabbit", :force => true, :expires_in => 1.second) { @white_rabbit }
+          store.fetch("rabbit").should === @white_rabbit ; sleep 2
+          store.fetch("rabbit").should be_nil
+        end
+      end
+
+      private
+        def instantiate_store(addresses = nil)
+          Sinatra::Cache::RedisStore.new(addresses).instance_variable_get(:@data)
+        end
+
+        def with_store_management
+          yield @store
+          yield @dstore
+        end
+    end
+  end
+end

data/spec/config/node-one.conf

@@ -0,0 +1,417 @@
+# Redis configuration file example
+
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
+daemonize no
+
+# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
+# default. You can specify a custom pid file location here.
+pidfile /var/run/redis.pid
+
+# Accept connections on the specified port, default is 6379.
+# If port 0 is specified Redis will not listen on a TCP socket.
+port 6380
+
+# If you want you can bind a single interface, if the bind option is not
+# specified all the interfaces will listen for incoming connections.
+#
+# bind 127.0.0.1
+
+# Specify the path for the unix socket that will be used to listen for
+# incoming connections. There is no default, so Redis will not listen
+# on a unix socket when not specified.
+#
+# unixsocket /tmp/redis.sock
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 300
+
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile stdout
+
+# To enable logging to the system logger, just set 'syslog-enabled' to yes,
+# and optionally update the other syslog parameters to suit your needs.
+# syslog-enabled no
+
+# Specify the syslog identity.
+# syslog-ident redis
+
+# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
+# syslog-facility local0
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
+# Save the DB on disk:
+#
+#   save <seconds> <changes>
+#
+#   Will save the DB if both the given number of seconds and the given
+#   number of write operations against the DB occurred.
+#
+#   In the example below the behaviour will be to save:
+#   after 900 sec (15 min) if at least 1 key changed
+#   after 300 sec (5 min) if at least 10 keys changed
+#   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
+save 900 1
+save 300 10
+save 60 10000
+
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename tmp/node-one-dump.rdb
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+# 
+# Also the Append Only File will be created inside this directory.
+# 
+# Note that you must specify a directory here, not a file name.
+dir ./
+
+################################# REPLICATION #################################
+
+# Master-Slave replication. Use slaveof to make a Redis instance a copy of
+# another Redis server. Note that the configuration is local to the slave
+# so for example it is possible to configure the slave to save the DB with a
+# different interval, or to listen to another port, and so on.
+#
+# slaveof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
+# When a slave lost the connection with the master, or when the replication
+# is still in progress, the slave can act in two different ways:
+#
+# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
+#    still reply to client requests, possibly with out of data data, or the
+#    data set may just be empty if this is the first synchronization.
+#
+# 2) if slave-serve-stale data is set to 'no' the slave will reply with
+#    an error "SYNC with master in progress" to all the kind of commands
+#    but to INFO and SLAVEOF.
+#
+slave-serve-stale-data yes
+
+################################## SECURITY ###################################
+
+# Require clients to issue AUTH <PASSWORD> before processing any other
+# commands.  This might be useful in environments in which you do not trust
+# others with access to the host running redis-server.
+#
+# This should stay commented out for backward compatibility and because most
+# people do not need auth (e.g. they run their own servers).
+# 
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
+# requirepass foobared
+
+# Command renaming.
+#
+# It is possilbe to change the name of dangerous commands in a shared
+# environment. For instance the CONFIG command may be renamed into something
+# of hard to guess so that it will be still available for internal-use
+# tools but not available for general clients.
+#
+# Example:
+#
+# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
+#
+# It is also possilbe to completely kill a command renaming it into
+# an empty string:
+#
+# rename-command CONFIG ""
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limits.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
+
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
+# is reached? You can select among five behavior:
+# 
+# volatile-lru -> remove the key with an expire set using an LRU algorithm
+# allkeys-lru -> remove any key accordingly to the LRU algorithm
+# volatile-random -> remove a random key with an expire set
+# allkeys->random -> remove a random key, any key
+# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
+# noeviction -> don't expire at all, just return an error on write operations
+# 
+# Note: with all the kind of policies, Redis will return an error on write
+#       operations, when there are not suitable keys for eviction.
+#
+#       At the date of writing this commands are: set setnx setex append
+#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
+#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
+#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
+#       getset mset msetnx exec sort
+#
+# The default is:
+#
+# maxmemory-policy volatile-lru
+
+# LRU and minimal TTL algorithms are not precise algorithms but approximated
+# algorithms (in order to save memory), so you can select as well the sample
+# size to check. For instance for default Redis will check three keys and
+# pick the one that was used less recently, you can change the sample size
+# using the following configuration directive.
+#
+# maxmemory-samples 3
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.aof. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush 
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+# When the AOF fsync policy is set to always or everysec, and a background
+# saving process (a background save or AOF log background rewriting) is
+# performing a lot of I/O against the disk, in some Linux configurations
+# Redis may block too long on the fsync() call. Note that there is no fix for
+# this currently, as even performing fsync in a different thread will block
+# our synchronous write(2) call.
+#
+# In order to mitigate this problem it's possible to use the following option
+# that will prevent fsync() from being called in the main process while a
+# BGSAVE or BGREWRITEAOF is in progress.
+#
+# This means that while another child is saving the durability of Redis is
+# the same as "appendfsync none", that in pratical terms means that it is
+# possible to lost up to 30 seconds of log in the worst scenario (with the
+# default Linux settings).
+# 
+# If you have latency problems turn this to "yes". Otherwise leave it as
+# "no" that is the safest pick from the point of view of durability.
+no-appendfsync-on-rewrite no
+
+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
+
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running. Redis will complain if the
+# swap file is already in use.
+#
+# The best kind of storage for the Redis swap file (that's accessed at random) 
+# is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /tmp/redis.swap
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
+
+############################### ADVANCED CONFIG ###############################
+
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 512
+hash-max-zipmap-value 64
+
+# Similarly to hashes, small lists are also encoded in a special way in order
+# to save a lot of space. The special representation is only used when
+# you are under the following limits:
+list-max-ziplist-entries 512
+list-max-ziplist-value 64
+
+# Sets have a special encoding in just one case: when a set is composed
+# of just strings that happens to be integers in radix 10 in the range
+# of 64 bit signed integers.
+# The following configuration setting sets the limit in the size of the
+# set in order to use this special memory saving encoding.
+set-max-intset-entries 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf