inspec 2.0.16 → 2.0.17

data/docs/resources/sys_info.md.erb

@@ -1,42 +1,42 @@
----
-title: About the sys_info Resource
-platform: os
----
-
-# sys_info
-
-Use the `sys_info` InSpec audit resource to test for operating system properties for the named host, and then returns that info as standard output.
-
-<br>
-
-## Syntax
-
-An `sys_info` resource block declares the hostname to be tested:
-
-    describe sys_info do
-      its('hostname') { should eq 'value' }
-    end
-
-<br>
-
-## Examples
-
-The following examples show how to use this InSpec audit resource.
-
-### Get system information for example.com
-
-    describe sys_info do
-      its('hostname') { should eq 'example.com' }
-    end
-
-<br>
-
-## Matchers
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### hostname
-
-The `hostname` matcher tests the host for which standard output is returned:
-
-    its('hostname') { should eq 'value' }
+---
+title: About the sys_info Resource
+platform: os
+---
+
+# sys_info
+
+Use the `sys_info` InSpec audit resource to test for operating system properties for the named host, and then returns that info as standard output.
+
+<br>
+
+## Syntax
+
+An `sys_info` resource block declares the hostname to be tested:
+
+    describe sys_info do
+      its('hostname') { should eq 'value' }
+    end
+
+<br>
+
+## Examples
+
+The following examples show how to use this InSpec audit resource.
+
+### Get system information for example.com
+
+    describe sys_info do
+      its('hostname') { should eq 'example.com' }
+    end
+
+<br>
+
+## Matchers
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### hostname
+
+The `hostname` matcher tests the host for which standard output is returned:
+
+    its('hostname') { should eq 'value' }

data/docs/resources/systemd_service.md.erb

@@ -1,57 +1,57 @@
----
-title: About the systemd_service Resource
-platform: linux
----
-
-# systemd_service
-
-Use the `systemd_service` InSpec audit resource to test a service using SystemD.
-
-<br>
-
-## Syntax
-
-A `systemd_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
-
-    describe systemd_service('service_name') do
-      it { should be_installed }
-      it { should be_enabled }
-      it { should be_running }
-    end
-
-where
-
-* `('service_name')` must specify a service name
-* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
-
-The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
-
-    describe systemd_service('service_name', '/path/to/control') do
-      it { should be_enabled }
-      it { should be_installed }
-      it { should be_running }
-    end
-
-<br>
-
-## Matchers
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### be_enabled
-
-The `be_enabled` matcher tests if the named service is enabled:
-
-    it { should be_enabled }
-
-### be_installed
-
-The `be_installed` matcher tests if the named service is installed:
-
-    it { should be_installed }
-
-### be_running
-
-The `be_running` matcher tests if the named service is running:
-
-    it { should be_running }
+---
+title: About the systemd_service Resource
+platform: linux
+---
+
+# systemd_service
+
+Use the `systemd_service` InSpec audit resource to test a service using SystemD.
+
+<br>
+
+## Syntax
+
+A `systemd_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
+
+    describe systemd_service('service_name') do
+      it { should be_installed }
+      it { should be_enabled }
+      it { should be_running }
+    end
+
+where
+
+* `('service_name')` must specify a service name
+* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
+
+The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
+
+    describe systemd_service('service_name', '/path/to/control') do
+      it { should be_enabled }
+      it { should be_installed }
+      it { should be_running }
+    end
+
+<br>
+
+## Matchers
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### be_enabled
+
+The `be_enabled` matcher tests if the named service is enabled:
+
+    it { should be_enabled }
+
+### be_installed
+
+The `be_installed` matcher tests if the named service is installed:
+
+    it { should be_installed }
+
+### be_running
+
+The `be_running` matcher tests if the named service is running:
+
+    it { should be_running }

data/docs/resources/sysv_service.md.erb

@@ -1,57 +1,57 @@
----
-title: About the sysv_service Resource
-platform: linux
----
-
-# sysv_service
-
-Use the `sysv_service` InSpec audit resource to test a service using SystemV.
-
-<br>
-
-## Syntax
-
-A `sysv_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
-
-    describe sysv_service('service_name') do
-      it { should be_installed }
-      it { should be_enabled }
-      it { should be_running }
-    end
-
-where
-
-* `('service_name')` must specify a service name
-* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
-
-The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
-
-    describe sysv_service('service_name', '/path/to/control') do
-      it { should be_enabled }
-      it { should be_installed }
-      it { should be_running }
-    end
-
-<br>
-
-## Matchers
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### be_enabled
-
-The `be_enabled` matcher tests if the named service is enabled:
-
-    it { should be_enabled }
-
-### be_installed
-
-The `be_installed` matcher tests if the named service is installed:
-
-    it { should be_installed }
-
-### be_running
-
-The `be_running` matcher tests if the named service is running:
-
-    it { should be_running }
+---
+title: About the sysv_service Resource
+platform: linux
+---
+
+# sysv_service
+
+Use the `sysv_service` InSpec audit resource to test a service using SystemV.
+
+<br>
+
+## Syntax
+
+A `sysv_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
+
+    describe sysv_service('service_name') do
+      it { should be_installed }
+      it { should be_enabled }
+      it { should be_running }
+    end
+
+where
+
+* `('service_name')` must specify a service name
+* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
+
+The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
+
+    describe sysv_service('service_name', '/path/to/control') do
+      it { should be_enabled }
+      it { should be_installed }
+      it { should be_running }
+    end
+
+<br>
+
+## Matchers
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### be_enabled
+
+The `be_enabled` matcher tests if the named service is enabled:
+
+    it { should be_enabled }
+
+### be_installed
+
+The `be_installed` matcher tests if the named service is installed:
+
+    it { should be_installed }
+
+### be_running
+
+The `be_running` matcher tests if the named service is running:
+
+    it { should be_running }

data/docs/resources/upstart_service.md.erb

@@ -1,57 +1,57 @@
----
-title: About the upstart_service Resource
-platform: linux
----
-
-# upstart_service
-
-Use the `upstart_service` InSpec audit resource to test a service using Upstart.
-
-<br>
-
-## Syntax
-
-An `upstart_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
-
-    describe upstart_service('service_name') do
-      it { should be_installed }
-      it { should be_enabled }
-      it { should be_running }
-    end
-
-where
-
-* `('service_name')` must specify a service name
-* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
-
-The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
-
-    describe upstart_service('service_name', '/path/to/control') do
-      it { should be_enabled }
-      it { should be_installed }
-      it { should be_running }
-    end
-
-<br>
-
-## Matchers
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### be_enabled
-
-The `be_enabled` matcher tests if the named service is enabled:
-
-    it { should be_enabled }
-
-### be_installed
-
-The `be_installed` matcher tests if the named service is installed:
-
-    it { should be_installed }
-
-### be_running
-
-The `be_running` matcher tests if the named service is running:
-
-    it { should be_running }
+---
+title: About the upstart_service Resource
+platform: linux
+---
+
+# upstart_service
+
+Use the `upstart_service` InSpec audit resource to test a service using Upstart.
+
+<br>
+
+## Syntax
+
+An `upstart_service` resource block declares the name of a service and then one (or more) matchers to test the state of the service:
+
+    describe upstart_service('service_name') do
+      it { should be_installed }
+      it { should be_enabled }
+      it { should be_running }
+    end
+
+where
+
+* `('service_name')` must specify a service name
+* `be_installed`, `be_enabled`, and `be_running` are valid matchers for this resource; all matchers available to the `service` resource may be used
+
+The path to the service manager's control may be specified for situations where the path isn't available in the current `PATH`. For example:
+
+    describe upstart_service('service_name', '/path/to/control') do
+      it { should be_enabled }
+      it { should be_installed }
+      it { should be_running }
+    end
+
+<br>
+
+## Matchers
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### be_enabled
+
+The `be_enabled` matcher tests if the named service is enabled:
+
+    it { should be_enabled }
+
+### be_installed
+
+The `be_installed` matcher tests if the named service is installed:
+
+    it { should be_installed }
+
+### be_running
+
+The `be_running` matcher tests if the named service is running:
+
+    it { should be_running }

data/docs/resources/user.md.erb

@@ -1,140 +1,140 @@
----
-title: About the user Resource
-platform: os
----
-
-# user
-
-Use the `user` InSpec audit resource to test user profiles for a single, known/expected local user, including the groups to which that user belongs, the frequency of required password changes, and the directory paths to home and shell.
-
-<br>
-
-## Syntax
-
-A `user` resource block declares a user name, and then one (or more) matchers:
-
-    describe user('root') do
-      it { should exist }
-      its('uid') { should eq 1234 }
-      its('gid') { should eq 1234 }
-      its('group') { should eq 'root' }
-      its('groups') { should eq ['root', 'other']}
-      its('home') { should eq '/root' }
-      its('shell') { should eq '/bin/bash' }
-      its('mindays') { should eq 0 }
-      its('maxdays') { should eq 90 }
-      its('warndays') { should eq 8 }
-    end
-
-where
-
-* `('root')` is the user to be tested
-* `it { should exist }` tests if the user exists
-* `gid`, `group`, `groups`, `home`, `maxdays`, `mindays`, `shell`, `uid`, and `warndays` are valid matchers for this resource
-
-<br>
-
-## Examples
-
-The following examples show how to use this InSpec audit resource.
-
-### Verify available users for the MySQL server
-
-    describe user('root') do
-      it { should exist }
-      its('uid') { should eq 0 }
-      its('groups') { should eq ['root'] }
-    end
-
-    describe user('mysql') do
-     it { should_not exist }
-    end
-
-### Test users on multiple platforms
-
-The `nginx` user is typically `www-data`, but on CentOS it's `nginx`. The following example shows how to test for the `nginx` user with a single test, but accounting for all platforms:
-
-    web_user = 'www-data'
-    web_user = 'nginx' if os[:family] == 'centos'
-
-    describe user(web_user) do
-      it { should exist }
-    end
-
-<br>
-
-## Matchers
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### exist
-
-The `exist` matcher tests if the named user exists:
-
-    it { should exist }
-
-### gid
-
-The `gid` matcher tests the group identifier:
-
-    its('gid') { should eq 1234 }
-
-where `1234` represents the user identifier.
-
-### group
-
-The `group` matcher tests the group to which the user belongs:
-
-    its('group') { should eq 'root' }
-
-where `root` represents the group.
-
-### groups
-
-The `groups` matcher tests two (or more) groups to which the user belongs:
-
-    its('groups') { should eq ['root', 'other'] }
-
-### home
-
-The `home` matcher tests the home directory path for the user:
-
-    its('home') { should eq '/root' }
-
-### maxdays
-
-The `maxdays` matcher tests the maximum number of days between password changes:
-
-    its('maxdays') { should eq 99 }
-
-where `99` represents the maximum number of days.
-
-### mindays
-
-The `mindays` matcher tests the minimum number of days between password changes:
-
-    its('mindays') { should eq 0 }
-
-where `0` represents the maximum number of days.
-
-### shell
-
-The `shell` matcher tests the path to the default shell for the user:
-
-    its('shell') { should eq '/bin/bash' }
-
-### uid
-
-The `uid` matcher tests the user identifier:
-
-    its('uid') { should eq 1234 }
-
-where `1234` represents the user identifier.
-
-### warndays
-
-The `warndays` matcher tests the number of days a user is warned before a password must be changed:
-
-    its('warndays') { should eq 5 }
-
-where `5` represents the number of days a user is warned.
+---
+title: About the user Resource
+platform: os
+---
+
+# user
+
+Use the `user` InSpec audit resource to test user profiles for a single, known/expected local user, including the groups to which that user belongs, the frequency of required password changes, and the directory paths to home and shell.
+
+<br>
+
+## Syntax
+
+A `user` resource block declares a user name, and then one (or more) matchers:
+
+    describe user('root') do
+      it { should exist }
+      its('uid') { should eq 1234 }
+      its('gid') { should eq 1234 }
+      its('group') { should eq 'root' }
+      its('groups') { should eq ['root', 'other']}
+      its('home') { should eq '/root' }
+      its('shell') { should eq '/bin/bash' }
+      its('mindays') { should eq 0 }
+      its('maxdays') { should eq 90 }
+      its('warndays') { should eq 8 }
+    end
+
+where
+
+* `('root')` is the user to be tested
+* `it { should exist }` tests if the user exists
+* `gid`, `group`, `groups`, `home`, `maxdays`, `mindays`, `shell`, `uid`, and `warndays` are valid matchers for this resource
+
+<br>
+
+## Examples
+
+The following examples show how to use this InSpec audit resource.
+
+### Verify available users for the MySQL server
+
+    describe user('root') do
+      it { should exist }
+      its('uid') { should eq 0 }
+      its('groups') { should eq ['root'] }
+    end
+
+    describe user('mysql') do
+     it { should_not exist }
+    end
+
+### Test users on multiple platforms
+
+The `nginx` user is typically `www-data`, but on CentOS it's `nginx`. The following example shows how to test for the `nginx` user with a single test, but accounting for all platforms:
+
+    web_user = 'www-data'
+    web_user = 'nginx' if os[:family] == 'centos'
+
+    describe user(web_user) do
+      it { should exist }
+    end
+
+<br>
+
+## Matchers
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### exist
+
+The `exist` matcher tests if the named user exists:
+
+    it { should exist }
+
+### gid
+
+The `gid` matcher tests the group identifier:
+
+    its('gid') { should eq 1234 }
+
+where `1234` represents the user identifier.
+
+### group
+
+The `group` matcher tests the group to which the user belongs:
+
+    its('group') { should eq 'root' }
+
+where `root` represents the group.
+
+### groups
+
+The `groups` matcher tests two (or more) groups to which the user belongs:
+
+    its('groups') { should eq ['root', 'other'] }
+
+### home
+
+The `home` matcher tests the home directory path for the user:
+
+    its('home') { should eq '/root' }
+
+### maxdays
+
+The `maxdays` matcher tests the maximum number of days between password changes:
+
+    its('maxdays') { should eq 99 }
+
+where `99` represents the maximum number of days.
+
+### mindays
+
+The `mindays` matcher tests the minimum number of days between password changes:
+
+    its('mindays') { should eq 0 }
+
+where `0` represents the maximum number of days.
+
+### shell
+
+The `shell` matcher tests the path to the default shell for the user:
+
+    its('shell') { should eq '/bin/bash' }
+
+### uid
+
+The `uid` matcher tests the user identifier:
+
+    its('uid') { should eq 1234 }
+
+where `1234` represents the user identifier.
+
+### warndays
+
+The `warndays` matcher tests the number of days a user is warned before a password must be changed:
+
+    its('warndays') { should eq 5 }
+
+where `5` represents the number of days a user is warned.