inspec 1.51.15 → 1.51.18

data/docs/resources/crontab.md.erb

@@ -1,87 +1,87 @@
----
-title: About the crontab Resource
----
-
-# crontab
-
-Use the `crontab` InSpec audit resource to test the crontab entries for a particular user on the system. It recognizes special time strings (@yearly, @weekly, etc).
-
-<br>
-
-## Syntax
-
-A `crontab` resource block declares a user (which defaults to the current user, if not specified), and then the details to be tested, such as the schedule elements for each crontab entry or the commands itself:
-
-    describe crontab do
-      its('commands') { should include '/some/scheduled/task.sh' }
-    end
-
-<br>
-
-## Resource Parameter Examples
-
-The following examples show how to use this InSpec audit resource.
-
-### Test that root's crontab has a particular command
-
-    describe crontab('root') do
-      its('commands') { should include '/path/to/some/script' }
-    end
-
-### Test that myuser's crontab entry for command '/home/myuser/build.sh' runs every minute
-
-    describe crontab('myuser').commands('/home/myuser/build.sh') do
-      its('hours') { should cmp '*' }
-      its('minutes') { should cmp '*' }
-    end
-
-### Test that the logged-in user's crontab has no tasks set to run on every hour and every minute
-
-    describe crontab.where({'hour' => '*', 'minute' => '*'}) do
-      its('entries.length') { should cmp '0' }
-    end
-
-### Test that the logged-in user's crontab contains a single command that matches a mattern
-
-    describe crontab.where { command =~ /a partial command string/ } do
-      its('entries.length') { should cmp 1 }
-    end
-
-### Test a special time string (i.e., @yearly /root/anual_report.sh)
-
-    describe crontab.commands('/root/anual_report.sh') do
-      its('hours') { should cmp '0' }
-      its('minutes') { should cmp '0' }
-      its('days') { should cmp '1' }
-      its('months') { should cmp '1' }
-    end
-
-### Test @reboot case
-
-    describe crontab.commands('/root/reboot.sh') do
-      its('hours') { should cmp '-1' }
-      its('minutes') { should cmp '-1' }
-    end
-
-<br>
-
-## Property Examples
-
-  ### Test a special time string
-
-    describe crontab do
-      its('minutes') { should cmp '0' }
-      its('hours') { should cmp '0' }
-      its('days') { should cmp '1' }
-      its('weekdays') { should cmp '1' }
-      its('user') { should include 'username'}
-      its('commands') { should include '/some/scheduled/task.sh' }
-    end
-
-InSpec will automatically interpret crontab-supported special time strings. For example, a crontab entry set to run `@yearly` can be tested as if the entry was manually configured to run on January 1, 12 AM.
-
-<br>
-
-## Matchers
-
-For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+---
+title: About the crontab Resource
+---
+
+# crontab
+
+Use the `crontab` InSpec audit resource to test the crontab entries for a particular user on the system. It recognizes special time strings (@yearly, @weekly, etc).
+
+<br>
+
+## Syntax
+
+A `crontab` resource block declares a user (which defaults to the current user, if not specified), and then the details to be tested, such as the schedule elements for each crontab entry or the commands itself:
+
+    describe crontab do
+      its('commands') { should include '/some/scheduled/task.sh' }
+    end
+
+<br>
+
+## Resource Parameter Examples
+
+The following examples show how to use this InSpec audit resource.
+
+### Test that root's crontab has a particular command
+
+    describe crontab('root') do
+      its('commands') { should include '/path/to/some/script' }
+    end
+
+### Test that myuser's crontab entry for command '/home/myuser/build.sh' runs every minute
+
+    describe crontab('myuser').commands('/home/myuser/build.sh') do
+      its('hours') { should cmp '*' }
+      its('minutes') { should cmp '*' }
+    end
+
+### Test that the logged-in user's crontab has no tasks set to run on every hour and every minute
+
+    describe crontab.where({'hour' => '*', 'minute' => '*'}) do
+      its('entries.length') { should cmp '0' }
+    end
+
+### Test that the logged-in user's crontab contains a single command that matches a mattern
+
+    describe crontab.where { command =~ /a partial command string/ } do
+      its('entries.length') { should cmp 1 }
+    end
+
+### Test a special time string (i.e., @yearly /root/anual_report.sh)
+
+    describe crontab.commands('/root/anual_report.sh') do
+      its('hours') { should cmp '0' }
+      its('minutes') { should cmp '0' }
+      its('days') { should cmp '1' }
+      its('months') { should cmp '1' }
+    end
+
+### Test @reboot case
+
+    describe crontab.commands('/root/reboot.sh') do
+      its('hours') { should cmp '-1' }
+      its('minutes') { should cmp '-1' }
+    end
+
+<br>
+
+## Property Examples
+
+  ### Test a special time string
+
+    describe crontab do
+      its('minutes') { should cmp '0' }
+      its('hours') { should cmp '0' }
+      its('days') { should cmp '1' }
+      its('weekdays') { should cmp '1' }
+      its('user') { should include 'username'}
+      its('commands') { should include '/some/scheduled/task.sh' }
+    end
+
+InSpec will automatically interpret crontab-supported special time strings. For example, a crontab entry set to run `@yearly` can be tested as if the entry was manually configured to run on January 1, 12 AM.
+
+<br>
+
+## Matchers
+
+For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).

data/docs/resources/csv.md.erb

@@ -1,53 +1,53 @@
----
-title: About the csv Resource
----
-
-# csv
-
-Use the `csv` InSpec audit resource to test configuration data in a CSV file.
-
-<br>
-
-## Syntax
-
-A `csv` resource block declares the configuration data to be tested:
-
-    describe csv('file') do
-      its('name') { should cmp 'foo' }
-    end
-
-where
-
-* `'file'` is the path to a CSV file
-* `name` is a configuration setting in a CSV file
-* `should eq 'foo'` tests a value of `name` as read from a CSV file versus the value declared in the test
-
-<br>
-
-## Resource Parameter Examples
-
-The following examples show how to use this InSpec audit resource.
-
-### Test a CSV file
-
-    describe csv('some_file.csv') do
-      its('setting') { should eq 1 }
-    end
-
-<br>
-
-## Property Examples
-
-### name
-
-The `name` property tests the value of `name` as read from a CSV file compared to the value declared in the test.
-
-    its('name') { should cmp 'foo' }
-
-<br>
-
-## Matchers
-
-For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/). 
-
-
+---
+title: About the csv Resource
+---
+
+# csv
+
+Use the `csv` InSpec audit resource to test configuration data in a CSV file.
+
+<br>
+
+## Syntax
+
+A `csv` resource block declares the configuration data to be tested:
+
+    describe csv('file') do
+      its('name') { should cmp 'foo' }
+    end
+
+where
+
+* `'file'` is the path to a CSV file
+* `name` is a configuration setting in a CSV file
+* `should eq 'foo'` tests a value of `name` as read from a CSV file versus the value declared in the test
+
+<br>
+
+## Resource Parameter Examples
+
+The following examples show how to use this InSpec audit resource.
+
+### Test a CSV file
+
+    describe csv('some_file.csv') do
+      its('setting') { should eq 1 }
+    end
+
+<br>
+
+## Property Examples
+
+### name
+
+The `name` property tests the value of `name` as read from a CSV file compared to the value declared in the test.
+
+    its('name') { should cmp 'foo' }
+
+<br>
+
+## Matchers
+
+For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/). 
+
+

data/docs/resources/dh_params.md.erb

@@ -1,216 +1,216 @@
----
-title: The dh_params Resource
----
-
-# dh_params
-
-Use the `dh_params` InSpec audit resource to test Diffie-Hellman (DH) parameters.
-
-<br>
-
-## Syntax
-
-A `dh_params` resource block declares a parameter file to be tested.
-
-    describe dh_params('/path/to/file.dh_pem') do
-      it { should be_dh_params }
-      it { should be_valid }
-      its('generator') { should eq 2 }
-      its('modulus') { should eq '00:91:a0:15:89:e5:bc:38:93:12:02:fc:...' }
-      its('prime_length') { should eq 2048 }
-      its('pem') { should eq '-----BEGIN DH PARAMETERS...' }
-      its('text') { should eq 'PKCS#3 DH Parameters: (2048 bit)...' }
-    end
-
-<br>
-
-## Resource Parameter Examples
-
-### dh_params?
-
-Verify whether file contains DH parameters:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      it { should be_dh_params }
-    end
-
-<br>
-
-## Supported Resource Properties
-
-generator, modulus, prime_length, pem, text
-
-<br>
-
-## Property Examples
-
-### generator (Integer)
-
-Verify generator used for the Diffie-Hellman operation:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('generator') { should eq 2 }
-    end
-
-### modulus (String)
-
-Verify prime modulus used for the Diffie-Hellman operation:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('modulus') { should eq '00:91:a0:15:89:e5:bc:38:93:12:02:fc:...' }
-    end
-
-Example using multi-line string:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('modulus') do
-        # regex removes all whitespace
-        should eq <<-EOF.gsub(/[[:space:]]+/, '')
-          00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
-          f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
-          48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
-          1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
-          2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
-          ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
-          30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
-          1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
-          28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
-          2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
-          01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
-          e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
-          3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
-          60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
-          31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
-          5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
-          4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
-          cd:13
-        EOF
-      end
-    end
-
-### prime_length (Integer)
-
-Verify length of prime modulus used for the Diffie-Hellman operation:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('prime_length') { should eq 2048 }
-    end
-
-### pem (String)
-
-Verify `pem` output of DH parameters:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('pem') { should eq '-----BEGIN DH PARAMETERS...' }
-    end
-
-Example using multi-line string:
-
-    its('pem') do
-      # regex removes all leading spaces
-      should eq <<-EOF.gsub(/^[[:blank:]]+/, '')
-        -----BEGIN DH PARAMETERS-----
-        MIIBCAKCAQEAkaAVieW8OJMSAvyRooX39yljLtNOeob37oT+QtBIvJyR1VT4eB3A
-        QXiixKwaJIudiFWYC6ynI+vCqisuqfmv1I5OEbx/NaKs2jrv8CVsmqT9ACh2hixX
-        h2cwXbHWWyKPcqHq3ovvnjMaQJJohQJUAgn6wGDBPE4oJtvtJY44IVZA3MDAZh8r
-        MsO0eKkmlOr3QSiy9VsBOAxGCYUmTWkSjZUPNeLmTkc6ht2Ksv5FFSfYWcI89GL/
-        X3Tpd5JQRzYrBVdg7nuhYMwceit3GIo398cxPhXLFX97Zpb7xr591gNeDWB1K1ti
-        KqM3tjT5/pZM9sXjoVKvAcFPx0Kgvu3NEwIBAg==
-        -----END DH PARAMETERS-----
-      EOF
-    end
-
-Verify via `openssl dhparam` command:
-
-    $ openssl dhparam -in /path/to/file.dh_pem
-    -----BEGIN DH PARAMETERS-----
-    MIIBCAKCAQEAkaAVieW8OJMSAvyRooX39yljLtNOeob37oT+QtBIvJyR1VT4eB3A
-    QXiixKwaJIudiFWYC6ynI+vCqisuqfmv1I5OEbx/NaKs2jrv8CVsmqT9ACh2hixX
-    h2cwXbHWWyKPcqHq3ovvnjMaQJJohQJUAgn6wGDBPE4oJtvtJY44IVZA3MDAZh8r
-    MsO0eKkmlOr3QSiy9VsBOAxGCYUmTWkSjZUPNeLmTkc6ht2Ksv5FFSfYWcI89GL/
-    X3Tpd5JQRzYrBVdg7nuhYMwceit3GIo398cxPhXLFX97Zpb7xr591gNeDWB1K1ti
-    KqM3tjT5/pZM9sXjoVKvAcFPx0Kgvu3NEwIBAg==
-    -----END DH PARAMETERS-----
-
-### text (String)
-
-Verify human-readable text output of DH parameters:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      its('text') { should eq 'PKCS#3 DH Parameters: (2048 bit)...' }
-    end
-
-Example using multi-line string:
-
-    its('text') do
-      # regex removes 2 leading spaces
-      should eq <<-EOF.gsub(/^[[:blank:]]{2}/, '')
-        PKCS#3 DH Parameters: (2048 bit)
-            prime:
-                00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
-                f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
-                48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
-                1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
-                2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
-                ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
-                30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
-                1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
-                28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
-                2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
-                01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
-                e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
-                3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
-                60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
-                31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
-                5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
-                4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
-                cd:13
-            generator: 2 (0x2)
-        EOF
-    end
-
-Verify via `openssl dhparam` command:
-
-    $ openssl dhparam -in /path/to/file.dh_pem -noout -text
-    PKCS#3 DH Parameters: (2048 bit)
-        prime:
-            00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
-            f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
-            48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
-            1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
-            2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
-            ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
-            30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
-            1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
-            28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
-            2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
-            01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
-            e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
-            3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
-            60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
-            31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
-            5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
-            4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
-            cd:13
-        generator: 2 (0x2)
-
-<br>
-
-## Matchers
-
-For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/). 
-
-### valid?
-
-Verify whether DH parameters are valid:
-
-    describe dh_params('/path/to/file.dh_pem') do
-      it { should be_valid }
-    end
-
-### be\_dh\_params
-
-    describe dh_params('/path/to/file.dh_pem') do
-        it { should be_dh_params}
-    end
-
+---
+title: The dh_params Resource
+---
+
+# dh_params
+
+Use the `dh_params` InSpec audit resource to test Diffie-Hellman (DH) parameters.
+
+<br>
+
+## Syntax
+
+A `dh_params` resource block declares a parameter file to be tested.
+
+    describe dh_params('/path/to/file.dh_pem') do
+      it { should be_dh_params }
+      it { should be_valid }
+      its('generator') { should eq 2 }
+      its('modulus') { should eq '00:91:a0:15:89:e5:bc:38:93:12:02:fc:...' }
+      its('prime_length') { should eq 2048 }
+      its('pem') { should eq '-----BEGIN DH PARAMETERS...' }
+      its('text') { should eq 'PKCS#3 DH Parameters: (2048 bit)...' }
+    end
+
+<br>
+
+## Resource Parameter Examples
+
+### dh_params?
+
+Verify whether file contains DH parameters:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      it { should be_dh_params }
+    end
+
+<br>
+
+## Supported Resource Properties
+
+generator, modulus, prime_length, pem, text
+
+<br>
+
+## Property Examples
+
+### generator (Integer)
+
+Verify generator used for the Diffie-Hellman operation:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('generator') { should eq 2 }
+    end
+
+### modulus (String)
+
+Verify prime modulus used for the Diffie-Hellman operation:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('modulus') { should eq '00:91:a0:15:89:e5:bc:38:93:12:02:fc:...' }
+    end
+
+Example using multi-line string:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('modulus') do
+        # regex removes all whitespace
+        should eq <<-EOF.gsub(/[[:space:]]+/, '')
+          00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
+          f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
+          48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
+          1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
+          2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
+          ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
+          30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
+          1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
+          28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
+          2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
+          01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
+          e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
+          3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
+          60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
+          31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
+          5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
+          4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
+          cd:13
+        EOF
+      end
+    end
+
+### prime_length (Integer)
+
+Verify length of prime modulus used for the Diffie-Hellman operation:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('prime_length') { should eq 2048 }
+    end
+
+### pem (String)
+
+Verify `pem` output of DH parameters:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('pem') { should eq '-----BEGIN DH PARAMETERS...' }
+    end
+
+Example using multi-line string:
+
+    its('pem') do
+      # regex removes all leading spaces
+      should eq <<-EOF.gsub(/^[[:blank:]]+/, '')
+        -----BEGIN DH PARAMETERS-----
+        MIIBCAKCAQEAkaAVieW8OJMSAvyRooX39yljLtNOeob37oT+QtBIvJyR1VT4eB3A
+        QXiixKwaJIudiFWYC6ynI+vCqisuqfmv1I5OEbx/NaKs2jrv8CVsmqT9ACh2hixX
+        h2cwXbHWWyKPcqHq3ovvnjMaQJJohQJUAgn6wGDBPE4oJtvtJY44IVZA3MDAZh8r
+        MsO0eKkmlOr3QSiy9VsBOAxGCYUmTWkSjZUPNeLmTkc6ht2Ksv5FFSfYWcI89GL/
+        X3Tpd5JQRzYrBVdg7nuhYMwceit3GIo398cxPhXLFX97Zpb7xr591gNeDWB1K1ti
+        KqM3tjT5/pZM9sXjoVKvAcFPx0Kgvu3NEwIBAg==
+        -----END DH PARAMETERS-----
+      EOF
+    end
+
+Verify via `openssl dhparam` command:
+
+    $ openssl dhparam -in /path/to/file.dh_pem
+    -----BEGIN DH PARAMETERS-----
+    MIIBCAKCAQEAkaAVieW8OJMSAvyRooX39yljLtNOeob37oT+QtBIvJyR1VT4eB3A
+    QXiixKwaJIudiFWYC6ynI+vCqisuqfmv1I5OEbx/NaKs2jrv8CVsmqT9ACh2hixX
+    h2cwXbHWWyKPcqHq3ovvnjMaQJJohQJUAgn6wGDBPE4oJtvtJY44IVZA3MDAZh8r
+    MsO0eKkmlOr3QSiy9VsBOAxGCYUmTWkSjZUPNeLmTkc6ht2Ksv5FFSfYWcI89GL/
+    X3Tpd5JQRzYrBVdg7nuhYMwceit3GIo398cxPhXLFX97Zpb7xr591gNeDWB1K1ti
+    KqM3tjT5/pZM9sXjoVKvAcFPx0Kgvu3NEwIBAg==
+    -----END DH PARAMETERS-----
+
+### text (String)
+
+Verify human-readable text output of DH parameters:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      its('text') { should eq 'PKCS#3 DH Parameters: (2048 bit)...' }
+    end
+
+Example using multi-line string:
+
+    its('text') do
+      # regex removes 2 leading spaces
+      should eq <<-EOF.gsub(/^[[:blank:]]{2}/, '')
+        PKCS#3 DH Parameters: (2048 bit)
+            prime:
+                00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
+                f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
+                48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
+                1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
+                2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
+                ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
+                30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
+                1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
+                28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
+                2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
+                01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
+                e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
+                3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
+                60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
+                31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
+                5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
+                4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
+                cd:13
+            generator: 2 (0x2)
+        EOF
+    end
+
+Verify via `openssl dhparam` command:
+
+    $ openssl dhparam -in /path/to/file.dh_pem -noout -text
+    PKCS#3 DH Parameters: (2048 bit)
+        prime:
+            00:91:a0:15:89:e5:bc:38:93:12:02:fc:91:a2:85:
+            f7:f7:29:63:2e:d3:4e:7a:86:f7:ee:84:fe:42:d0:
+            48:bc:9c:91:d5:54:f8:78:1d:c0:41:78:a2:c4:ac:
+            1a:24:8b:9d:88:55:98:0b:ac:a7:23:eb:c2:aa:2b:
+            2e:a9:f9:af:d4:8e:4e:11:bc:7f:35:a2:ac:da:3a:
+            ef:f0:25:6c:9a:a4:fd:00:28:76:86:2c:57:87:67:
+            30:5d:b1:d6:5b:22:8f:72:a1:ea:de:8b:ef:9e:33:
+            1a:40:92:68:85:02:54:02:09:fa:c0:60:c1:3c:4e:
+            28:26:db:ed:25:8e:38:21:56:40:dc:c0:c0:66:1f:
+            2b:32:c3:b4:78:a9:26:94:ea:f7:41:28:b2:f5:5b:
+            01:38:0c:46:09:85:26:4d:69:12:8d:95:0f:35:e2:
+            e6:4e:47:3a:86:dd:8a:b2:fe:45:15:27:d8:59:c2:
+            3c:f4:62:ff:5f:74:e9:77:92:50:47:36:2b:05:57:
+            60:ee:7b:a1:60:cc:1c:7a:2b:77:18:8a:37:f7:c7:
+            31:3e:15:cb:15:7f:7b:66:96:fb:c6:be:7d:d6:03:
+            5e:0d:60:75:2b:5b:62:2a:a3:37:b6:34:f9:fe:96:
+            4c:f6:c5:e3:a1:52:af:01:c1:4f:c7:42:a0:be:ed:
+            cd:13
+        generator: 2 (0x2)
+
+<br>
+
+## Matchers
+
+For a full list of available matchers please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/). 
+
+### valid?
+
+Verify whether DH parameters are valid:
+
+    describe dh_params('/path/to/file.dh_pem') do
+      it { should be_valid }
+    end
+
+### be\_dh\_params
+
+    describe dh_params('/path/to/file.dh_pem') do
+        it { should be_dh_params}
+    end
+