incline 0.2.36 → 0.3.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 472b11ede146a710c68e84a1d1f7415c9bd3becb
-  data.tar.gz: b45093691a6c7049bc29ff1e2730253b430a2f89
+  metadata.gz: 9fe35793ff06a9491ed613497c6ea246a78e6b14
+  data.tar.gz: a1ce07e68a4d87dbd1908af7f73ec51686d8e922
 SHA512:
-  metadata.gz: a8148581944a9d26bf5a1f15290652f30e87e8cee951731feca79171d6206c71f73464cf8d586c29300135eeeaab55064dbc78c6c076c9e6e1e11c9e3188a01a
-  data.tar.gz: 3fb678b5771eec2d9a61df184bf293599ee24e773fe67828d63048f0f17828d0f9915e607481c17ecc84a696d05116616d43634070fea3bc1283b4434b661b28
+  metadata.gz: 928ded9613ba970170df22b18bf4032ddbc48a3e7effecb68152fc6555b49628bdcf5dfb9f611f9ab99f2bdb9b0276f80e0c38b859aa435efc2a11e3cadfc3ab
+  data.tar.gz: 1520c21edb79a2c187661847d3f0835d4a8e06cdca671962a92bec2b97b7150ea90e837d0e5f2afdf2d5c20e8f5d705eb7bc79352cf34898b1d4521ac00c8cf1

data/Gemfile.lock

@@ -1,7 +1,7 @@
 PATH
   remote: .
   specs:
-    incline (0.2.36)
+    incline (0.3.0)
       ansi (~> 1.5.0)
       bcrypt
       bootstrap-sass
@@ -13,7 +13,7 @@ PATH
       rails (~> 4.2.8)
       redcarpet (~> 3.4.0)
       sass-rails (~> 5.0.6)
-      shells (~> 0.1.15)
+      shells (~> 0.2.1)
       spawnling (~> 2.1.6)
       uglifier
 
@@ -58,14 +58,14 @@ GEM
       tzinfo (~> 1.1)
     ansi (1.5.0)
     arel (6.0.4)
-    autoprefixer-rails (7.2.3)
+    autoprefixer-rails (7.2.5)
       execjs
     bcrypt (3.1.11)
     bootstrap-sass (3.3.7)
       autoprefixer-rails (>= 5.2.1)
       sass (>= 3.3.4)
     builder (3.2.3)
-    byebug (9.1.0)
+    byebug (10.0.0)
     coffee-rails (4.2.2)
       coffee-script (>= 2.2.0)
       railties (>= 4.0.0)
@@ -86,7 +86,7 @@ GEM
     ffi (1.9.18)
     globalid (0.4.1)
       activesupport (>= 4.2.0)
-    i18n (0.9.1)
+    i18n (0.9.3)
       concurrent-ruby (~> 1.0)
     jbuilder (2.7.0)
       activesupport (>= 4.2.0)
@@ -102,10 +102,10 @@ GEM
       mini_mime (>= 0.1.1)
     mini_mime (1.0.0)
     mini_portile2 (2.3.0)
-    minitest (5.10.3)
-    multi_json (1.12.2)
+    minitest (5.11.3)
+    multi_json (1.13.1)
     net-ssh (4.1.0)
-    nokogiri (1.8.1)
+    nokogiri (1.8.2)
       mini_portile2 (~> 2.3.0)
     rack (1.6.8)
     rack-test (0.6.3)
@@ -141,7 +141,7 @@ GEM
     redcarpet (3.4.0)
     rubyserial (0.4.0)
       ffi (~> 1.9, >= 1.9.3)
-    sass (3.5.4)
+    sass (3.5.5)
       sass-listen (~> 4.0.0)
     sass-listen (4.0.0)
       rb-fsevent (~> 0.9, >= 0.9.4)
@@ -152,7 +152,7 @@ GEM
       sprockets (>= 2.8, < 4.0)
       sprockets-rails (>= 2.0, < 4.0)
       tilt (>= 1.1, < 3)
-    shells (0.1.21)
+    shells (0.2.1)
       net-ssh (~> 4.1.0)
       rubyserial (~> 0.4.0)
     spawnling (2.1.6)
@@ -169,9 +169,9 @@ GEM
     tilt (2.0.8)
     tiny_tds (1.3.0)
       mini_portile2 (~> 2.0)
-    tzinfo (1.2.4)
+    tzinfo (1.2.5)
       thread_safe (~> 0.1)
-    uglifier (4.0.2)
+    uglifier (4.1.5)
       execjs (>= 0.3.0, < 3)
     web-console (3.3.0)
       activemodel (>= 4.2)
@@ -191,4 +191,4 @@ DEPENDENCIES
   web-console (~> 3.3.0)
 
 BUNDLED WITH
-   1.16.0
+   1.16.1

data/lib/incline/cli/prepare.rb

@@ -24,7 +24,7 @@ module Incline
     ##
     # Defines the 'prepare' command for the CLI.
     class Prepare
-      
+
       ##
       # Creates a new 'prepare' command for the CLI.
       def initialize(host_name_or_ip, ssh_user, *options)
@@ -37,19 +37,19 @@ module Incline
             rails_version: '4.2.9'
         }
         @options[:host] = host_name_or_ip.to_s.strip
-        
+
         raise UsageError.new("The 'host_name_or_ip' parameter is required.", 'prepare') if @options[:host] == ''
-        
+
         if @options[:host] =~ /\A(?:\[[0-9a-f:]+\]|[a-z0-9]+(?:\.[a-z0-9]+)*):(?:\d+)\z/i
           h,_,p = @options[:host].rpartition(':')
           @options[:host] = h
           @options[:port] = p.to_i
         end
-        
+
         @options[:admin_user] = ssh_user.to_s.strip
-        
+
         raise UsageError.new("The 'ssh_user' parameter is required.", 'prepare') if @options[:admin_user] == ''
-        
+
         while options.any?
           flag = options.delete_at(0)
           case flag
@@ -67,7 +67,7 @@ module Incline
             when '--rails-version'
               @options[:rails_version] = options.delete_at(0).to_s.strip
               raise UsageError.new("The '--rails-version' parameter must be at least 4.2.", 'prepare') if @options[:rails_version].to_f < 4.2
-              
+
             # These options can be used to customize the self-signed certificate created initially.
             when '--ssl-country'
               @options[:ssl_country] = options.delete_at(0).to_s.strip
@@ -77,12 +77,12 @@ module Incline
               @options[:ssl_location] = options.delete_at(0).to_s.strip
             when '--ssl-org'
               @options[:ssl_org] = options.delete_at(0).to_s.strip
-              
+
             else
               raise UsageError.new("The '#{flag}' parameter is not recognized.", 'prepare')
           end
         end
-        
+
         @options[:port] = 22 unless (1..65535).include?(@options[:port])
         if @options[:admin_password].to_s.strip == ''
           print 'Please enter the sudo password: '
@@ -92,14 +92,14 @@ module Incline
             puts 'WARNING: Sudo password is blank and script may fail because of this.'
           end
         end
-        
+
         @options[:ssl_country] = 'US' if @options[:ssl_country].to_s == ''
         @options[:ssl_state] = 'Pennsylvania' if @options[:ssl_state].to_s == ''
         @options[:ssl_location] = 'Pittsburgh' if @options[:ssl_location].to_s == ''
         @options[:ssl_org] = 'WEB' if @options[:ssl_org].to_s == ''
-        
+
       end
-      
+
       ##
       # Prepares an Ubuntu server with NGINX and Passenger to run Rails applications.
       #
@@ -107,16 +107,16 @@ module Incline
       # Set 'ssh_user' to the user name you want to access the host as.
       # This user must be able to run 'sudo' commands and must not be 'root'.
       #
-      # You can provide a port value either appended to the host name or as a 
+      # You can provide a port value either appended to the host name or as a
       # separate argument using the '--port' option.
       # e.g. ssh.example.com:22 or --port 22
       #
-      # If you are configured with key authentication to the host then you don't 
-      # need to provide an SSH password to connect.  However, this password is 
+      # If you are configured with key authentication to the host then you don't
+      # need to provide an SSH password to connect.  However, this password is
       # also used to run sudo commands.  You can specify a password on the command
       # line by using the '--ssh-password' option.  If you do not, then the script
       # will prompt you for a "sudo" password to use.  You can leave this blank,
-      # but the script will warn you that it may lead to failure.  Obviously, if 
+      # but the script will warn you that it may lead to failure.  Obviously, if
       # you are configured with NOPASSWD in the sudoers file, then you can safely
       # leave the password blank.
       #
@@ -128,7 +128,7 @@ module Incline
       # e.g. --deploy_user bob
       #
       # The script will install 'rbenv' under the deploy user's account and then
-      # install Ruby followed by Rails.  The default Ruby version installed is 
+      # install Ruby followed by Rails.  The default Ruby version installed is
       # 2.3.4 and the Rails version installed is 4.2.9.  To change these versions
       # use the '--ruby-version' and '--rails-version' options.  The Ruby version
       # must be at least 2.3 and the rails version must be at least 4.2.
@@ -136,15 +136,15 @@ module Incline
       def run
         # reset the host info.
         @host_info = nil
-        
+
         admin_shell do |admin|
           # test the connection and sudo capabilities.
           admin.sudo_stat_exec 'Testing connection', 'ls -al /root'
-          
+
           # retrieve the host info now that we are connected.
           @host_info = admin.host_info
           raise CliError, "Host OS (#{host_id}) is not supported." unless [ :ubuntu ].include?(host_id)
-          
+
           # update the system and configure SSH.
           update_system admin
           ssh_copy_id(admin) unless @options[:admin_password] == ''
@@ -152,48 +152,48 @@ module Incline
         end
         # end the session and reconnect to take advantage of the SSH reset done at the end of config_ssh
         admin_shell do |admin|
-          # install ruby prerequisites and mariadb. 
+          # install ruby prerequisites and mariadb.
           install_prereqs admin
           install_db admin
-          
+
           # add the deploy user.
           add_deploy_user admin
-          
+
           # log in as deploy user
           deploy_shell do |deploy|
             # enable key auth.
             ssh_copy_id deploy
-            
+
             # install rbenv.
             install_rbenv deploy
           end
-          
+
           # log out and then back in to load rbenv
           deploy_shell do |deploy|
             # install ruby & rails
             install_ruby deploy
             install_rails deploy
-            
+
             # one more fun little addition, we'll add the flytrap app to catch path attacks.
             install_flytrap deploy
           end
           # done with the deploy user, so log out of that session.
-          
+
           # install Phusion Passenger to the host and then configure it.
           install_passenger admin
           config_passenger admin
-          
+
           # create a few helper utilities to test and reload the configuration.
           create_nginx_utils admin
-          
+
           # then restart nginx.
           restart_nginx admin
-          
+
           puts 'Testing nginx server...'
           admin.exec_ignore_code 'curl http://localhost/this-is-a-test'
           admin.exec "curl #{flytrap_path}"
         end
-        
+
         puts ''
         puts ANSI.ansi(:bold, :white) { 'Host preparation completed.' }
         puts ''
@@ -206,25 +206,25 @@ module Incline
         puts 'Server Test Path'
         puts ('-' * 70)
         puts ANSI.ansi(:bold) { flytrap_path }
-        
+
         logfile.flush
         logfile.close
         @logfile = nil
 
       end
-      
-      
+
+
       private
-      
+
       def host_info
         @host_info ||= {}
       end
-      
+
       def host_id
         host_info['ID'] ||= :unknown
       end
-      
-      
+
+
       def logfile
         @logfile ||=
             begin
@@ -234,9 +234,9 @@ module Incline
             end
 
       end
-      
+
       def admin_shell
-        Shells::SshSession.new(
+        Shells::SshBashShell.new(
             host: @options[:host],
             port: @options[:port],
             user: @options[:admin_user],
@@ -249,9 +249,9 @@ module Incline
           yield sh
         end
       end
-      
+
       def deploy_shell
-        Shells::SshSession.new(
+        Shells::SshBashShell.new(
             host: @options[:host],
             port: @options[:port],
             user: @options[:deploy_user],
@@ -264,7 +264,7 @@ module Incline
           yield sh
         end
       end
-      
+
     end
   end
 end

data/lib/incline/version.rb

@@ -1,3 +1,3 @@
 module Incline
-  VERSION = "0.2.36"
+  VERSION = "0.3.0"
 end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: incline
 version: !ruby/object:Gem::Version
-  version: 0.2.36
+  version: 0.3.0
 platform: ruby
 authors:
 - Beau Barker
 autorequire: 
 bindir: exe
 cert_chain: []
-date: 2017-12-20 00:00:00.000000000 Z
+date: 2018-02-05 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: rails
@@ -156,14 +156,14 @@ dependencies:
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: 0.1.15
+        version: 0.2.1
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: 0.1.15
+        version: 0.2.1
 - !ruby/object:Gem::Dependency
   name: ansi
   requirement: !ruby/object:Gem::Requirement
@@ -610,7 +610,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
       version: '0'
 requirements: []
 rubyforge_project: 
-rubygems_version: 2.6.11
+rubygems_version: 2.6.14
 signing_key: 
 specification_version: 4
 summary: A gem designed to get off to an even quicker start with Rails.