image_pack 0.2.6 → 0.2.7

data/ext/image_pack/vendor/mozjpeg/simd/mips/jsimd_dspr2_asm.h

@@ -1,292 +0,0 @@
-/*
- * MIPS DSPr2 optimizations for libjpeg-turbo
- *
- * Copyright (C) 2013, MIPS Technologies, Inc., California.
- * Copyright (C) 2018, Matthieu Darbois.
- * All Rights Reserved.
- * Authors:  Teodora Novkovic (teodora.novkovic@imgtec.com)
- *           Darko Laus       (darko.laus@imgtec.com)
- * This software is provided 'as-is', without any express or implied
- * warranty.  In no event will the authors be held liable for any damages
- * arising from the use of this software.
- *
- * Permission is granted to anyone to use this software for any purpose,
- * including commercial applications, and to alter it and redistribute it
- * freely, subject to the following restrictions:
- *
- * 1. The origin of this software must not be misrepresented; you must not
- *    claim that you wrote the original software. If you use this software
- *    in a product, an acknowledgment in the product documentation would be
- *    appreciated but is not required.
- * 2. Altered source versions must be plainly marked as such, and must not be
- *    misrepresented as being the original software.
- * 3. This notice may not be removed or altered from any source distribution.
- */
-
-#define zero  $0
-#define AT    $1
-#define v0    $2
-#define v1    $3
-#define a0    $4
-#define a1    $5
-#define a2    $6
-#define a3    $7
-#define t0    $8
-#define t1    $9
-#define t2    $10
-#define t3    $11
-#define t4    $12
-#define t5    $13
-#define t6    $14
-#define t7    $15
-#define s0    $16
-#define s1    $17
-#define s2    $18
-#define s3    $19
-#define s4    $20
-#define s5    $21
-#define s6    $22
-#define s7    $23
-#define t8    $24
-#define t9    $25
-#define k0    $26
-#define k1    $27
-#define gp    $28
-#define sp    $29
-#define fp    $30
-#define s8    $30
-#define ra    $31
-
-#define f0    $f0
-#define f1    $f1
-#define f2    $f2
-#define f3    $f3
-#define f4    $f4
-#define f5    $f5
-#define f6    $f6
-#define f7    $f7
-#define f8    $f8
-#define f9    $f9
-#define f10   $f10
-#define f11   $f11
-#define f12   $f12
-#define f13   $f13
-#define f14   $f14
-#define f15   $f15
-#define f16   $f16
-#define f17   $f17
-#define f18   $f18
-#define f19   $f19
-#define f20   $f20
-#define f21   $f21
-#define f22   $f22
-#define f23   $f23
-#define f24   $f24
-#define f25   $f25
-#define f26   $f26
-#define f27   $f27
-#define f28   $f28
-#define f29   $f29
-#define f30   $f30
-#define f31   $f31
-
-#ifdef __ELF__
-#define HIDDEN_SYMBOL(symbol)  .hidden symbol;
-#else
-#define HIDDEN_SYMBOL(symbol)
-#endif
-
-/*
- * LEAF_MIPS32R2 - declare leaf routine for MIPS32r2
- */
-#define LEAF_MIPS32R2(symbol) \
-    .globl      symbol; \
-    HIDDEN_SYMBOL(symbol) \
-    .align      2; \
-    .type       symbol, @function; \
-    .ent        symbol, 0; \
-symbol: \
-    .frame      sp, 0, ra; \
-    .set        push; \
-    .set        arch = mips32r2; \
-    .set        noreorder; \
-    .set        noat;
-
-/*
- * LEAF_DSPR2 - declare leaf routine for MIPS DSPr2
- */
-#define LEAF_DSPR2(symbol) \
-LEAF_MIPS32R2(symbol) \
-    .set        dspr2;
-
-/*
- * END - mark end of function
- */
-#define END(function) \
-    .set        pop; \
-    .end        function; \
-    .size       function, .-function
-
-/*
- * Checks if stack offset is big enough for storing/restoring regs_num
- * number of register to/from stack. Stack offset must be greater than
- * or equal to the number of bytes needed for storing registers (regs_num*4).
- * Since MIPS ABI allows usage of first 16 bytes of stack frame (this is
- * preserved for input arguments of the functions, already stored in a0-a3),
- * stack size can be further optimized by utilizing this space.
- */
-.macro CHECK_STACK_OFFSET regs_num, stack_offset
-.if \stack_offset < \regs_num * 4 - 16
-.error "Stack offset too small."
-.endif
-.endm
-
-/*
- * Saves set of registers on stack. Maximum number of registers that
- * can be saved on stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
- * Stack offset is number of bytes that are added to stack pointer (sp)
- * before registers are pushed in order to provide enough space on stack
- * (offset must be multiple of 4, and must be big enough, as described by
- * CHECK_STACK_OFFSET macro). This macro is intended to be used in
- * combination with RESTORE_REGS_FROM_STACK macro. Example:
- *  SAVE_REGS_ON_STACK      4, v0, v1, s0, s1
- *  RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
- */
-.macro SAVE_REGS_ON_STACK  stack_offset = 0, r1, \
-                           r2  = 0, r3  = 0, r4  = 0, \
-                           r5  = 0, r6  = 0, r7  = 0, \
-                           r8  = 0, r9  = 0, r10 = 0, \
-                           r11 = 0, r12 = 0, r13 = 0, \
-                           r14 = 0
-.if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4)
-    .error "Stack offset must be pozitive and multiple of 4."
-.endif
-.if \stack_offset != 0
-    addiu       sp, sp, -\stack_offset
-.endif
-    sw          \r1, 0(sp)
-.if \r2 != 0
-    sw          \r2, 4(sp)
-.endif
-.if \r3 != 0
-    sw          \r3, 8(sp)
-.endif
-.if \r4 != 0
-    sw          \r4, 12(sp)
-.endif
-.if \r5 != 0
-    CHECK_STACK_OFFSET 5, \stack_offset
-    sw          \r5, 16(sp)
-.endif
-.if \r6 != 0
-    CHECK_STACK_OFFSET 6, \stack_offset
-    sw          \r6, 20(sp)
-.endif
-.if \r7 != 0
-    CHECK_STACK_OFFSET 7, \stack_offset
-    sw          \r7, 24(sp)
-.endif
-.if \r8 != 0
-    CHECK_STACK_OFFSET 8, \stack_offset
-    sw          \r8, 28(sp)
-.endif
-.if \r9 != 0
-    CHECK_STACK_OFFSET 9, \stack_offset
-    sw          \r9, 32(sp)
-.endif
-.if \r10 != 0
-    CHECK_STACK_OFFSET 10, \stack_offset
-    sw          \r10, 36(sp)
-.endif
-.if \r11 != 0
-    CHECK_STACK_OFFSET 11, \stack_offset
-    sw          \r11, 40(sp)
-.endif
-.if \r12 != 0
-    CHECK_STACK_OFFSET 12, \stack_offset
-    sw          \r12, 44(sp)
-.endif
-.if \r13 != 0
-    CHECK_STACK_OFFSET 13, \stack_offset
-    sw          \r13, 48(sp)
-.endif
-.if \r14 != 0
-    CHECK_STACK_OFFSET 14, \stack_offset
-    sw          \r14, 52(sp)
-.endif
-.endm
-
-/*
- * Restores set of registers from stack. Maximum number of registers that
- * can be restored from stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
- * Stack offset is number of bytes that are added to stack pointer (sp)
- * after registers are restored (offset must be multiple of 4, and must
- * be big enough, as described by CHECK_STACK_OFFSET macro). This macro is
- * intended to be used in combination with RESTORE_REGS_FROM_STACK macro.
- * Example:
- *  SAVE_REGS_ON_STACK      4, v0, v1, s0, s1
- *  RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
- */
-.macro RESTORE_REGS_FROM_STACK  stack_offset = 0, r1, \
-                                r2  = 0, r3  = 0, r4  = 0, \
-                                r5  = 0, r6  = 0, r7  = 0, \
-                                r8  = 0, r9  = 0, r10 = 0, \
-                                r11 = 0, r12 = 0, r13 = 0, \
-                                r14 = 0
-.if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4)
-    .error "Stack offset must be pozitive and multiple of 4."
-.endif
-    lw          \r1, 0(sp)
-.if \r2 != 0
-    lw          \r2, 4(sp)
-.endif
-.if \r3 != 0
-    lw          \r3, 8(sp)
-.endif
-.if \r4 != 0
-    lw          \r4, 12(sp)
-.endif
-.if \r5 != 0
-    CHECK_STACK_OFFSET 5, \stack_offset
-    lw          \r5, 16(sp)
-.endif
-.if \r6 != 0
-    CHECK_STACK_OFFSET 6, \stack_offset
-    lw          \r6, 20(sp)
-.endif
-.if \r7 != 0
-    CHECK_STACK_OFFSET 7, \stack_offset
-    lw          \r7, 24(sp)
-.endif
-.if \r8 != 0
-    CHECK_STACK_OFFSET 8, \stack_offset
-    lw          \r8, 28(sp)
-.endif
-.if \r9 != 0
-    CHECK_STACK_OFFSET 9, \stack_offset
-    lw          \r9, 32(sp)
-.endif
-.if \r10 != 0
-    CHECK_STACK_OFFSET 10, \stack_offset
-    lw          \r10, 36(sp)
-.endif
-.if \r11 != 0
-    CHECK_STACK_OFFSET 11, \stack_offset
-    lw          \r11, 40(sp)
-.endif
-.if \r12 != 0
-    CHECK_STACK_OFFSET 12, \stack_offset
-    lw          \r12, 44(sp)
-.endif
-.if \r13 != 0
-    CHECK_STACK_OFFSET 13, \stack_offset
-    lw          \r13, 48(sp)
-.endif
-.if \r14 != 0
-    CHECK_STACK_OFFSET 14, \stack_offset
-    lw          \r14, 52(sp)
-.endif
-.if \stack_offset != 0
-    addiu       sp, sp, \stack_offset
-.endif
-.endm

data/ext/image_pack/vendor/mozjpeg/simd/mips64/jcsample.h

@@ -1,28 +0,0 @@
-/*
- * jcsample.h
- *
- * This file was part of the Independent JPEG Group's software:
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * For conditions of distribution and use, see the accompanying README.ijg
- * file.
- */
-
-LOCAL(void)
-expand_right_edge(JSAMPARRAY image_data, int num_rows, JDIMENSION input_cols,
-                  JDIMENSION output_cols)
-{
-  register JSAMPROW ptr;
-  register JSAMPLE pixval;
-  register int count;
-  int row;
-  int numcols = (int)(output_cols - input_cols);
-
-  if (numcols > 0) {
-    for (row = 0; row < num_rows; row++) {
-      ptr = image_data[row] + input_cols;
-      pixval = ptr[-1];
-      for (count = numcols; count > 0; count--)
-        *ptr++ = pixval;
-    }
-  }
-}

data/ext/image_pack/vendor/mozjpeg/simd/mips64/jsimd_mmi.h

@@ -1,69 +0,0 @@
-/*
- * Loongson MMI optimizations for libjpeg-turbo
- *
- * Copyright (C) 2016-2018, Loongson Technology Corporation Limited, BeiJing.
- *                          All Rights Reserved.
- * Authors:  ZhuChen     <zhuchen@loongson.cn>
- *           CaiWanwei   <caiwanwei@loongson.cn>
- *           SunZhangzhi <sunzhangzhi-cq@loongson.cn>
- *           QingfaLiu   <liuqingfa-hf@loongson.cn>
- *
- * This software is provided 'as-is', without any express or implied
- * warranty.  In no event will the authors be held liable for any damages
- * arising from the use of this software.
- *
- * Permission is granted to anyone to use this software for any purpose,
- * including commercial applications, and to alter it and redistribute it
- * freely, subject to the following restrictions:
- *
- * 1. The origin of this software must not be misrepresented; you must not
- *    claim that you wrote the original software. If you use this software
- *    in a product, an acknowledgment in the product documentation would be
- *    appreciated but is not required.
- * 2. Altered source versions must be plainly marked as such, and must not be
- *    misrepresented as being the original software.
- * 3. This notice may not be removed or altered from any source distribution.
- */
-
-#define JPEG_INTERNALS
-#include "../../jinclude.h"
-#include "../../jpeglib.h"
-#include "../../jdct.h"
-#include "loongson-mmintrin.h"
-
-
-/* Common code */
-#if defined(_ABI64) && _MIPS_SIM == _ABI64
-# define PTR_ADDU  "daddu "
-# define PTR_SLL   "dsll "
-#else
-# define PTR_ADDU  "addu "
-# define PTR_SLL   "sll "
-#endif
-
-#define SIZEOF_MMWORD  8
-#define BYTE_BIT  8
-#define WORD_BIT  16
-#define SCALEBITS  16
-
-#define _uint64_set_pi8(a, b, c, d, e, f, g, h) \
-  (((uint64_t)(uint8_t)a << 56) | \
-   ((uint64_t)(uint8_t)b << 48) | \
-   ((uint64_t)(uint8_t)c << 40) | \
-   ((uint64_t)(uint8_t)d << 32) | \
-   ((uint64_t)(uint8_t)e << 24) | \
-   ((uint64_t)(uint8_t)f << 16) | \
-   ((uint64_t)(uint8_t)g << 8)  | \
-   ((uint64_t)(uint8_t)h))
-#define _uint64_set1_pi8(a)  _uint64_set_pi8(a, a, a, a, a, a, a, a)
-#define _uint64_set_pi16(a, b, c, d) \
-  (((uint64_t)(uint16_t)a << 48) | \
-   ((uint64_t)(uint16_t)b << 32) | \
-   ((uint64_t)(uint16_t)c << 16) | \
-   ((uint64_t)(uint16_t)d))
-#define _uint64_set1_pi16(a)  _uint64_set_pi16(a, a, a, a)
-#define _uint64_set_pi32(a, b) \
-  (((uint64_t)(uint32_t)a << 32) | \
-   ((uint64_t)(uint32_t)b))
-
-#define get_const_value(index)  (*(__m64 *)&const_value[index])