image_compressor_pack 1.0.0.1-universal-darwin-16

data/ports/x86_64-apple-darwin16.1.0/mozjpeg/3.1/share/doc/README-turbo.txt

@@ -0,0 +1,363 @@
+*******************************************************************************
+**     Background
+*******************************************************************************
+
+libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2,
+NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64,
+and ARM systems.  On such systems, libjpeg-turbo is generally 2-4x as fast as
+libjpeg, all else being equal.  On other types of systems, libjpeg-turbo can
+still outperform libjpeg by a significant amount, by virtue of its
+highly-optimized Huffman coding routines.  In many cases, the performance of
+libjpeg-turbo rivals that of proprietary high-speed JPEG codecs.
+
+libjpeg-turbo implements both the traditional libjpeg API as well as the less
+powerful but more straightforward TurboJPEG API.  libjpeg-turbo also features
+colorspace extensions that allow it to compress from/decompress to 32-bit and
+big-endian pixel buffers (RGBX, XBGR, etc.), as well as a full-featured Java
+interface.
+
+libjpeg-turbo was originally based on libjpeg/SIMD, an MMX-accelerated
+derivative of libjpeg v6b developed by Miyasaka Masaru.  The TigerVNC and
+VirtualGL projects made numerous enhancements to the codec in 2009, and in
+early 2010, libjpeg-turbo spun off into an independent project, with the goal
+of making high-speed JPEG compression/decompression technology available to a
+broader range of users and developers.
+
+
+*******************************************************************************
+**     License
+*******************************************************************************
+
+Most of libjpeg-turbo inherits the non-restrictive, BSD-style license used by
+libjpeg (see README.)  The TurboJPEG wrapper (both C and Java versions) and
+associated test programs bear a similar license, which is reproduced below:
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+- Redistributions of source code must retain the above copyright notice,
+  this list of conditions and the following disclaimer.
+- Redistributions in binary form must reproduce the above copyright notice,
+  this list of conditions and the following disclaimer in the documentation
+  and/or other materials provided with the distribution.
+- Neither the name of the libjpeg-turbo Project nor the names of its
+  contributors may be used to endorse or promote products derived from this
+  software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS",
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+
+*******************************************************************************
+**     Using libjpeg-turbo
+*******************************************************************************
+
+libjpeg-turbo includes two APIs that can be used to compress and decompress
+JPEG images:
+
+  TurboJPEG API:  This API provides an easy-to-use interface for compressing
+  and decompressing JPEG images in memory.  It also provides some functionality
+  that would not be straightforward to achieve using the underlying libjpeg
+  API, such as generating planar YUV images and performing multiple
+  simultaneous lossless transforms on an image.  The Java interface for
+  libjpeg-turbo is written on top of the TurboJPEG API.
+
+  libjpeg API:  This is the de facto industry-standard API for compressing and
+  decompressing JPEG images.  It is more difficult to use than the TurboJPEG
+  API but also more powerful.  The libjpeg API implementation in libjpeg-turbo
+  is both API/ABI-compatible and mathematically compatible with libjpeg v6b.
+  It can also optionally be configured to be API/ABI-compatible with libjpeg v7
+  and v8 (see below.)
+
+There is no significant performance advantage to either API when both are used
+to perform similar operations.
+
+=====================
+Colorspace Extensions
+=====================
+
+libjpeg-turbo includes extensions that allow JPEG images to be compressed
+directly from (and decompressed directly to) buffers that use BGR, BGRX,
+RGBX, XBGR, and XRGB pixel ordering.  This is implemented with ten new
+colorspace constants:
+
+  JCS_EXT_RGB   /* red/green/blue */
+  JCS_EXT_RGBX  /* red/green/blue/x */
+  JCS_EXT_BGR   /* blue/green/red */
+  JCS_EXT_BGRX  /* blue/green/red/x */
+  JCS_EXT_XBGR  /* x/blue/green/red */
+  JCS_EXT_XRGB  /* x/red/green/blue */
+  JCS_EXT_RGBA  /* red/green/blue/alpha */
+  JCS_EXT_BGRA  /* blue/green/red/alpha */
+  JCS_EXT_ABGR  /* alpha/blue/green/red */
+  JCS_EXT_ARGB  /* alpha/red/green/blue */
+
+Setting cinfo.in_color_space (compression) or cinfo.out_color_space
+(decompression) to one of these values will cause libjpeg-turbo to read the
+red, green, and blue values from (or write them to) the appropriate position in
+the pixel when compressing from/decompressing to an RGB buffer.
+
+Your application can check for the existence of these extensions at compile
+time with:
+
+  #ifdef JCS_EXTENSIONS
+
+At run time, attempting to use these extensions with a libjpeg implementation
+that does not support them will result in a "Bogus input colorspace" error.
+Applications can trap this error in order to test whether run-time support is
+available for the colorspace extensions.
+
+When using the RGBX, BGRX, XBGR, and XRGB colorspaces during decompression, the
+X byte is undefined, and in order to ensure the best performance, libjpeg-turbo
+can set that byte to whatever value it wishes.  If an application expects the X
+byte to be used as an alpha channel, then it should specify JCS_EXT_RGBA,
+JCS_EXT_BGRA, JCS_EXT_ABGR, or JCS_EXT_ARGB.  When these colorspace constants
+are used, the X byte is guaranteed to be 0xFF, which is interpreted as opaque.
+
+Your application can check for the existence of the alpha channel colorspace
+extensions at compile time with:
+
+  #ifdef JCS_ALPHA_EXTENSIONS
+
+jcstest.c, located in the libjpeg-turbo source tree, demonstrates how to check
+for the existence of the colorspace extensions at compile time and run time.
+
+===================================
+libjpeg v7 and v8 API/ABI Emulation
+===================================
+
+With libjpeg v7 and v8, new features were added that necessitated extending the
+compression and decompression structures.  Unfortunately, due to the exposed
+nature of those structures, extending them also necessitated breaking backward
+ABI compatibility with previous libjpeg releases.  Thus, programs that were
+built to use libjpeg v7 or v8 did not work with libjpeg-turbo, since it is
+based on the libjpeg v6b code base.  Although libjpeg v7 and v8 are not
+as widely used as v6b, enough programs (including a few Linux distros) made
+the switch that there was a demand to emulate the libjpeg v7 and v8 ABIs
+in libjpeg-turbo.  It should be noted, however, that this feature was added
+primarily so that applications that had already been compiled to use libjpeg
+v7+ could take advantage of accelerated baseline JPEG encoding/decoding
+without recompiling.  libjpeg-turbo does not claim to support all of the
+libjpeg v7+ features, nor to produce identical output to libjpeg v7+ in all
+cases (see below.)
+
+By passing an argument of --with-jpeg7 or --with-jpeg8 to configure, or an
+argument of -DWITH_JPEG7=1 or -DWITH_JPEG8=1 to cmake, you can build a version
+of libjpeg-turbo that emulates the libjpeg v7 or v8 ABI, so that programs
+that are built against libjpeg v7 or v8 can be run with libjpeg-turbo.  The
+following section describes which libjpeg v7+ features are supported and which
+aren't.
+
+Support for libjpeg v7 and v8 Features:
+---------------------------------------
+
+Fully supported:
+
+-- libjpeg: IDCT scaling extensions in decompressor
+   libjpeg-turbo supports IDCT scaling with scaling factors of 1/8, 1/4, 3/8,
+   1/2, 5/8, 3/4, 7/8, 9/8, 5/4, 11/8, 3/2, 13/8, 7/4, 15/8, and 2/1 (only 1/4
+   and 1/2 are SIMD-accelerated.)
+
+-- libjpeg: arithmetic coding
+
+-- libjpeg: In-memory source and destination managers
+   See notes below.
+
+-- cjpeg: Separate quality settings for luminance and chrominance
+   Note that the libpjeg v7+ API was extended to accommodate this feature only
+   for convenience purposes.  It has always been possible to implement this
+   feature with libjpeg v6b (see rdswitch.c for an example.)
+
+-- cjpeg: 32-bit BMP support
+
+-- cjpeg: -rgb option
+
+-- jpegtran: lossless cropping
+
+-- jpegtran: -perfect option
+
+-- jpegtran: forcing width/height when performing lossless crop
+
+-- rdjpgcom: -raw option
+
+-- rdjpgcom: locale awareness
+
+
+Not supported:
+
+NOTE:  As of this writing, extensive research has been conducted into the
+usefulness of DCT scaling as a means of data reduction and SmartScale as a
+means of quality improvement.  The reader is invited to peruse the research at
+http://www.libjpeg-turbo.org/About/SmartScale and draw his/her own conclusions,
+but it is the general belief of our project that these features have not
+demonstrated sufficient usefulness to justify inclusion in libjpeg-turbo.
+
+-- libjpeg: DCT scaling in compressor
+   cinfo.scale_num and cinfo.scale_denom are silently ignored.
+   There is no technical reason why DCT scaling could not be supported when
+   emulating the libjpeg v7+ API/ABI, but without the SmartScale extension (see
+   below), only scaling factors of 1/2, 8/15, 4/7, 8/13, 2/3, 8/11, 4/5, and
+   8/9 would be available, which is of limited usefulness.
+
+-- libjpeg: SmartScale
+   cinfo.block_size is silently ignored.
+   SmartScale is an extension to the JPEG format that allows for DCT block
+   sizes other than 8x8.  Providing support for this new format would be
+   feasible (particularly without full acceleration.)  However, until/unless
+   the format becomes either an official industry standard or, at minimum, an
+   accepted solution in the community, we are hesitant to implement it, as
+   there is no sense of whether or how it might change in the future.  It is
+   our belief that SmartScale has not demonstrated sufficient usefulness as a
+   lossless format nor as a means of quality enhancement, and thus, our primary
+   interest in providing this feature would be as a means of supporting
+   additional DCT scaling factors.
+
+-- libjpeg: Fancy downsampling in compressor
+   cinfo.do_fancy_downsampling is silently ignored.
+   This requires the DCT scaling feature, which is not supported.
+
+-- jpegtran: Scaling
+   This requires both the DCT scaling and SmartScale features, which are not
+   supported.
+
+-- Lossless RGB JPEG files
+   This requires the SmartScale feature, which is not supported.
+
+What About libjpeg v9?
+----------------------
+
+libjpeg v9 introduced yet another field to the JPEG compression structure
+(color_transform), thus making the ABI backward incompatible with that of
+libjpeg v8.  This new field was introduced solely for the purpose of supporting
+lossless SmartScale encoding.  Further, there was actually no reason to extend
+the API in this manner, as the color transform could have just as easily been
+activated by way of a new JPEG colorspace constant, thus preserving backward
+ABI compatibility.
+
+Our research (see link above) has shown that lossless SmartScale does not
+generally accomplish anything that can't already be accomplished better with
+existing, standard lossless formats.  Thus, at this time, it is our belief that
+there is not sufficient technical justification for software to upgrade from
+libjpeg v8 to libjpeg v9, and therefore, not sufficient technical justification
+for us to emulate the libjpeg v9 ABI.
+
+=====================================
+In-Memory Source/Destination Managers
+=====================================
+
+By default, libjpeg-turbo 1.3 and later includes the jpeg_mem_src() and
+jpeg_mem_dest() functions, even when not emulating the libjpeg v8 API/ABI.
+Previously, it was necessary to build libjpeg-turbo from source with libjpeg v8
+API/ABI emulation in order to use the in-memory source/destination managers,
+but several projects requested that those functions be included when emulating
+the libjpeg v6b API/ABI as well.  This allows the use of those functions by
+programs that need them without breaking ABI compatibility for programs that
+don't, and it allows those functions to be provided in the "official"
+libjpeg-turbo binaries.
+
+Those who are concerned about maintaining strict conformance with the libjpeg
+v6b or v7 API can pass an argument of --without-mem-srcdst to configure or
+an argument of -DWITH_MEM_SRCDST=0 to CMake prior to building libjpeg-turbo.
+This will restore the pre-1.3 behavior, in which jpeg_mem_src() and
+jpeg_mem_dest() are only included when emulating the libjpeg v8 API/ABI.
+
+On Un*x systems, including the in-memory source/destination managers changes
+the dynamic library version from 62.0.0 to 62.1.0 if using libjpeg v6b API/ABI
+emulation and from 7.0.0 to 7.1.0 if using libjpeg v7 API/ABI emulation.
+
+Note that, on most Un*x systems, the dynamic linker will not look for a
+function in a library until that function is actually used.  Thus, if a program
+is built against libjpeg-turbo 1.3+ and uses jpeg_mem_src() or jpeg_mem_dest(),
+that program will not fail if run against an older version of libjpeg-turbo or
+against libjpeg v7- until the program actually tries to call jpeg_mem_src() or
+jpeg_mem_dest().  Such is not the case on Windows.  If a program is built
+against the libjpeg-turbo 1.3+ DLL and uses jpeg_mem_src() or jpeg_mem_dest(),
+then it must use the libjpeg-turbo 1.3+ DLL at run time.
+
+Both cjpeg and djpeg have been extended to allow testing the in-memory
+source/destination manager functions.  See their respective man pages for more
+details.
+
+
+*******************************************************************************
+**     Mathematical Compatibility
+*******************************************************************************
+
+For the most part, libjpeg-turbo should produce identical output to libjpeg
+v6b.  The one exception to this is when using the floating point DCT/IDCT, in
+which case the outputs of libjpeg v6b and libjpeg-turbo can differ for the
+following reasons:
+
+-- The SSE/SSE2 floating point DCT implementation in libjpeg-turbo is ever so
+   slightly more accurate than the implementation in libjpeg v6b, but not by
+   any amount perceptible to human vision (generally in the range of 0.01 to
+   0.08 dB gain in PNSR.)
+-- When not using the SIMD extensions, libjpeg-turbo uses the more accurate
+   (and slightly faster) floating point IDCT algorithm introduced in libjpeg
+   v8a as opposed to the algorithm used in libjpeg v6b.  It should be noted,
+   however, that this algorithm basically brings the accuracy of the floating
+   point IDCT in line with the accuracy of the slow integer IDCT.  The floating
+   point DCT/IDCT algorithms are mainly a legacy feature, and they do not
+   produce significantly more accuracy than the slow integer algorithms (to put
+   numbers on this, the typical difference in PNSR between the two algorithms
+   is less than 0.10 dB, whereas changing the quality level by 1 in the upper
+   range of the quality scale is typically more like a 1.0 dB difference.)
+-- When not using the SIMD extensions, then the accuracy of the floating point
+   DCT/IDCT can depend on the compiler and compiler settings.
+
+While libjpeg-turbo does emulate the libjpeg v8 API/ABI, under the hood, it is
+still using the same algorithms as libjpeg v6b, so there are several specific
+cases in which libjpeg-turbo cannot be expected to produce the same output as
+libjpeg v8:
+
+-- When decompressing using scaling factors of 1/2 and 1/4, because libjpeg v8
+   implements those scaling algorithms differently than libjpeg v6b does, and
+   libjpeg-turbo's SIMD extensions are based on the libjpeg v6b behavior.
+
+-- When using chrominance subsampling, because libjpeg v8 implements this
+   with its DCT/IDCT scaling algorithms rather than with a separate
+   downsampling/upsampling algorithm.  In our testing, the subsampled/upsampled
+   output of libjpeg v8 is less accurate than that of libjpeg v6b for this
+   reason.
+
+-- When decompressing using a scaling factor > 1 and merged (AKA "non-fancy" or
+   "non-smooth") chrominance upsampling, because libjpeg v8 does not support
+   merged upsampling with scaling factors > 1.
+
+
+*******************************************************************************
+**     Performance Pitfalls
+*******************************************************************************
+
+===============
+Restart Markers
+===============
+
+The optimized Huffman decoder in libjpeg-turbo does not handle restart markers
+in a way that makes the rest of the libjpeg infrastructure happy, so it is
+necessary to use the slow Huffman decoder when decompressing a JPEG image that
+has restart markers.  This can cause the decompression performance to drop by
+as much as 20%, but the performance will still be much greater than that of
+libjpeg.  Many consumer packages, such as PhotoShop, use restart markers when
+generating JPEG images, so images generated by those programs will experience
+this issue.
+
+===============================================
+Fast Integer Forward DCT at High Quality Levels
+===============================================
+
+The algorithm used by the SIMD-accelerated quantization function cannot produce
+correct results whenever the fast integer forward DCT is used along with a JPEG
+quality of 98-100.  Thus, libjpeg-turbo must use the non-SIMD quantization
+function in those cases.  This causes performance to drop by as much as 40%.
+It is therefore strongly advised that you use the slow integer forward DCT
+whenever encoding images with a JPEG quality of 98 or higher.