image_compressor_pack 0.1.3-universal-darwin-15

data/ports/x86_64-apple-darwin15.0.0/mozjpeg/3.1/share/man/man1/djpeg.1

@@ -0,0 +1,278 @@
+.TH DJPEG 1 "21 November 2014"
+.SH NAME
+djpeg \- decompress a JPEG file to an image file
+.SH SYNOPSIS
+.B djpeg
+[
+.I options
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B djpeg
+decompresses the named JPEG file, or the standard input if no file is named,
+and produces an image file on the standard output.  PBMPLUS (PPM/PGM), BMP,
+GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
+(RLE is supported only if the URT library is available.)
+.SH OPTIONS
+All switch names may be abbreviated; for example,
+.B \-grayscale
+may be written
+.B \-gray
+or
+.BR \-gr .
+Most of the "basic" switches can be abbreviated to as little as one letter.
+Upper and lower case are equivalent (thus
+.B \-BMP
+is the same as
+.BR \-bmp ).
+British spellings are also accepted (e.g.,
+.BR \-greyscale ),
+though for brevity these are not mentioned below.
+.PP
+The basic switches are:
+.TP
+.BI \-colors " N"
+Reduce image to at most N colors.  This reduces the number of colors used in
+the output image, so that it can be displayed on a colormapped display or
+stored in a colormapped file format.  For example, if you have an 8-bit
+display, you'd need to reduce to 256 or fewer colors.
+.TP
+.BI \-quantize " N"
+Same as
+.BR \-colors .
+.B \-colors
+is the recommended name,
+.B \-quantize
+is provided only for backwards compatibility.
+.TP
+.B \-fast
+Select recommended processing options for fast, low quality output.  (The
+default options are chosen for highest quality output.)  Currently, this is
+equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
+.TP
+.B \-grayscale
+Force grayscale output even if JPEG file is color.  Useful for viewing on
+monochrome displays; also,
+.B djpeg
+runs noticeably faster in this mode.
+.TP
+.B \-rgb
+Force RGB output even if JPEG file is grayscale.
+.TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.  Currently the scale factor must be
+M/8, where M is an integer between 1 and 16 inclusive, or any reduced fraction
+thereof (such as 1/2, 3/4, etc.)  Scaling is handy if the image is larger than
+your screen; also,
+.B djpeg
+runs much faster when scaling down the output.
+.TP
+.B \-bmp
+Select BMP output format (Windows flavor).  8-bit colormapped format is
+emitted if
+.B \-colors
+or
+.B \-grayscale
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
+format is emitted.
+.TP
+.B \-gif
+Select GIF output format.  Since GIF does not support more than 256 colors,
+.B \-colors 256
+is assumed (unless you specify a smaller number of colors).
+.TP
+.B \-os2
+Select BMP output format (OS/2 1.x flavor).  8-bit colormapped format is
+emitted if
+.B \-colors
+or
+.B \-grayscale
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
+format is emitted.
+.TP
+.B \-pnm
+Select PBMPLUS (PPM/PGM) output format (this is the default format).
+PGM is emitted if the JPEG file is grayscale or if
+.B \-grayscale
+is specified; otherwise PPM is emitted.
+.TP
+.B \-rle
+Select RLE output format.  (Requires URT library.)
+.TP
+.B \-targa
+Select Targa output format.  Grayscale format is emitted if the JPEG file is
+grayscale or if
+.B \-grayscale
+is specified; otherwise, colormapped format is emitted if
+.B \-colors
+is specified; otherwise, 24-bit full-color format is emitted.
+.PP
+Switches for advanced users:
+.TP
+.B \-dct int
+Use integer DCT method (default).
+.TP
+.B \-dct fast
+Use fast integer DCT (less accurate).
+In libjpeg-turbo, the fast method is generally about 5-15% faster than the int
+method when using the x86/x86-64 SIMD extensions (results may vary with other
+SIMD implementations, or when using libjpeg-turbo without SIMD extensions.)  If
+the JPEG image was compressed using a quality level of 85 or below, then there
+should be little or no perceptible difference between the two algorithms.  When
+decompressing images that were compressed using quality levels above 85,
+however, the difference between the fast and int methods becomes more
+pronounced.  With images compressed using quality=97, for instance, the fast
+method incurs generally about a 4-6 dB loss (in PSNR) relative to the int
+method, but this can be larger for some images.  If you can avoid it, do not
+use the fast method when decompressing images that were compressed using
+quality levels above 97.  The algorithm often degenerates for such images and
+can actually produce a more lossy output image than if the JPEG image had been
+compressed using lower quality levels.
+.TP
+.B \-dct float
+Use floating-point DCT method.
+The float method is mainly a legacy feature.  It does not produce significantly
+more accurate results than the int method, and it is much slower.  The float
+method may also give different results on different machines due to varying
+roundoff behavior, whereas the integer methods should give the same results on
+all machines.
+.TP
+.B \-dither fs
+Use Floyd-Steinberg dithering in color quantization.
+.TP
+.B \-dither ordered
+Use ordered dithering in color quantization.
+.TP
+.B \-dither none
+Do not use dithering in color quantization.
+By default, Floyd-Steinberg dithering is applied when quantizing colors; this
+is slow but usually produces the best results.  Ordered dither is a compromise
+between speed and quality; no dithering is fast but usually looks awful.  Note
+that these switches have no effect unless color quantization is being done.
+Ordered dither is only available in
+.B \-onepass
+mode.
+.TP
+.BI \-map " file"
+Quantize to the colors used in the specified image file.  This is useful for
+producing multiple files with identical color maps, or for forcing a
+predefined set of colors to be used.  The
+.I file
+must be a GIF or PPM file. This option overrides
+.B \-colors
+and
+.BR \-onepass .
+.TP
+.B \-nosmooth
+Use a faster, lower-quality upsampling routine.
+.TP
+.B \-onepass
+Use one-pass instead of two-pass color quantization.  The one-pass method is
+faster and needs less memory, but it produces a lower-quality image.
+.B \-onepass
+is ignored unless you also say
+.B \-colors
+.IR N .
+Also, the one-pass method is always used for grayscale output (the two-pass
+method is no improvement then).
+.TP
+.BI \-maxmemory " N"
+Set limit for amount of memory to use in processing large images.  Value is
+in thousands of bytes, or millions of bytes if "M" is attached to the
+number.  For example,
+.B \-max 4m
+selects 4000000 bytes.  If more space is needed, temporary files will be used.
+.TP
+.BI \-outfile " name"
+Send output image to the named file, not to standard output.
+.TP
+.BI \-memsrc
+Load input file into memory before decompressing.  This feature was implemented
+mainly as a way of testing the in-memory source manager (jpeg_mem_src().)
+.TP
+.B \-verbose
+Enable debug printout.  More
+.BR \-v 's
+give more output.  Also, version information is printed at startup.
+.TP
+.B \-debug
+Same as
+.BR \-verbose .
+.TP
+.B \-version
+Print version information and exit.
+.SH EXAMPLES
+.LP
+This example decompresses the JPEG file foo.jpg, quantizes it to
+256 colors, and saves the output in 8-bit BMP format in foo.bmp:
+.IP
+.B djpeg \-colors 256 \-bmp
+.I foo.jpg
+.B >
+.I foo.bmp
+.SH HINTS
+To get a quick preview of an image, use the
+.B \-grayscale
+and/or
+.B \-scale
+switches.
+.B \-grayscale \-scale 1/8
+is the fastest case.
+.PP
+Several options are available that trade off image quality to gain speed.
+.B \-fast
+turns on the recommended settings.
+.PP
+.B \-dct fast
+and/or
+.B \-nosmooth
+gain speed at a small sacrifice in quality.
+When producing a color-quantized image,
+.B \-onepass \-dither ordered
+is fast but much lower quality than the default behavior.
+.B \-dither none
+may give acceptable results in two-pass mode, but is seldom tolerable in
+one-pass mode.
+.PP
+If you are fortunate enough to have very fast floating point hardware,
+\fB\-dct float\fR may be even faster than \fB\-dct fast\fR.  But on most
+machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is
+not worth using, because its theoretical accuracy advantage is too small to be
+significant in practice.
+.SH ENVIRONMENT
+.TP
+.B JPEGMEM
+If this environment variable is set, its value is the default memory limit.
+The value is specified as described for the
+.B \-maxmemory
+switch.
+.B JPEGMEM
+overrides the default value specified when the program was compiled, and
+itself is overridden by an explicit
+.BR \-maxmemory .
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR jpegtran (1),
+.BR rdjpgcom (1),
+.BR wrjpgcom (1)
+.br
+.BR ppm (5),
+.BR pgm (5)
+.br
+Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
+.SH AUTHOR
+Independent JPEG Group
+.PP
+This file was modified by The libjpeg-turbo Project to include only information
+relevant to libjpeg-turbo, to wordsmith certain sections, and to describe
+features not present in libjpeg.
+.SH BUGS
+To avoid the Unisys LZW patent,
+.B djpeg
+produces uncompressed GIF files.  These are larger than they should be, but
+are readable by standard GIF decoders.

data/ports/x86_64-apple-darwin15.0.0/mozjpeg/3.1/share/man/man1/jpegtran.1

@@ -0,0 +1,269 @@
+.TH JPEGTRAN 1 "21 November 2014"
+.SH NAME
+jpegtran \- lossless transformation of JPEG files
+.SH SYNOPSIS
+.B jpegtran
+[
+.I options
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B jpegtran
+performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+.PP
+.B jpegtran
+works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
+.B djpeg
+followed by
+.B cjpeg
+to accomplish the same conversion.  But by the same token,
+.B jpegtran
+cannot perform lossy operations such as changing the image quality.
+.PP
+.B jpegtran
+reads the named JPEG/JFIF file, or the standard input if no file is
+named, and produces a JPEG/JFIF file on the standard output.
+.SH OPTIONS
+All switch names may be abbreviated; for example,
+.B \-optimize
+may be written
+.B \-opt
+or
+.BR \-o .
+Upper and lower case are equivalent.
+British spellings are also accepted (e.g.,
+.BR \-optimise ),
+though for brevity these are not mentioned below.
+.PP
+To specify the coded JPEG representation used in the output file,
+.B jpegtran
+accepts a subset of the switches recognized by
+.BR cjpeg :
+.TP
+.B \-optimize
+Perform optimization of entropy encoding parameters.
+.TP
+.B \-progressive
+Create progressive JPEG file.
+.TP
+.BI \-restart " N"
+Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
+attached to the number.
+.TP
+.B \-arithmetic
+Use arithmetic coding.
+.TP
+.BI \-scans " file"
+Use the scan script given in the specified text file.
+.PP
+See
+.BR cjpeg (1)
+for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+.PP
+The image can be losslessly transformed by giving one of these switches:
+.TP
+.B \-flip horizontal
+Mirror image horizontally (left-right).
+.TP
+.B \-flip vertical
+Mirror image vertically (top-bottom).
+.TP
+.B \-rotate 90
+Rotate image 90 degrees clockwise.
+.TP
+.B \-rotate 180
+Rotate image 180 degrees.
+.TP
+.B \-rotate 270
+Rotate image 270 degrees clockwise (or 90 ccw).
+.TP
+.B \-transpose
+Transpose image (across UL-to-LR axis).
+.TP
+.B \-transverse
+Transverse transpose (across UR-to-LL axis).
+.PP
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+.PP
+.BR jpegtran 's
+default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+.PP
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the
+.B \-trim
+switch:
+.TP
+.B \-trim
+Drop non-transformable edge blocks.
+.IP
+Obviously, a transformation with
+.B \-trim
+is not reversible, so strictly speaking
+.B jpegtran
+with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+.B \-rot 270 -trim
+trims only the bottom edge, but
+.B \-rot 90 -trim
+followed by
+.B \-rot 180 -trim
+trims both edges.
+.TP
+.B \-perfect
+If you are only interested in perfect transformations, add the
+.B \-perfect
+switch.  This causes
+.B jpegtran
+to fail with an error if the transformation is not perfect.
+.IP
+For example, you may want to do
+.IP
+.B (jpegtran \-rot 90 -perfect
+.I foo.jpg
+.B || djpeg
+.I foo.jpg
+.B | pnmflip \-r90 | cjpeg)
+.IP
+to do a perfect rotation, if available, or an approximated one if not.
+.TP
+.B \-crop WxH+X+Y
+Crop the image to a rectangular region of width W and height H, starting at
+point X,Y.  The lossless crop feature discards data outside of a given image
+region but losslessly preserves what is inside.  Like the rotate and flip
+transforms, lossless crop is restricted by the current JPEG format; the upper
+left corner of the selected region must fall on an iMCU boundary.  If it
+doesn't, then it is silently moved up and/or left to the nearest iMCU boundary
+(the lower right corner is unchanged.)
+.PP
+Other not-strictly-lossless transformation switches are:
+.TP
+.B \-grayscale
+Force grayscale output.
+.IP
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+.PP
+.B jpegtran
+also recognizes these switches that control what to do with "extra" markers,
+such as comment blocks:
+.TP
+.B \-copy none
+Copy no extra markers from source file.  This setting suppresses all
+comments and other excess baggage present in the source file.
+.TP
+.B \-copy comments
+Copy only comment markers.  This setting copies comments from the source file
+but discards any other data that is inessential for image display.
+.TP
+.B \-copy all
+Copy all extra markers.  This setting preserves miscellaneous markers
+found in the source file, such as JFIF thumbnails, Exif data, and Photoshop
+settings.  In some files, these extra markers can be sizable.
+.PP
+The default behavior is \fB-copy comments\fR.  (Note: in IJG releases v6 and
+v6a, \fBjpegtran\fR always did the equivalent of \fB-copy none\fR.)
+.PP
+Additional switches recognized by jpegtran are:
+.TP
+.BI \-maxmemory " N"
+Set limit for amount of memory to use in processing large images.  Value is
+in thousands of bytes, or millions of bytes if "M" is attached to the
+number.  For example,
+.B \-max 4m
+selects 4000000 bytes.  If more space is needed, temporary files will be used.
+.TP
+.BI \-outfile " name"
+Send output image to the named file, not to standard output.
+.TP
+.B \-verbose
+Enable debug printout.  More
+.BR \-v 's
+give more output.  Also, version information is printed at startup.
+.TP
+.B \-debug
+Same as
+.BR \-verbose .
+.TP
+.B \-version
+Print version information and exit.
+.SH EXAMPLES
+.LP
+This example converts a baseline JPEG file to progressive form:
+.IP
+.B jpegtran \-progressive
+.I foo.jpg
+.B >
+.I fooprog.jpg
+.PP
+This example rotates an image 90 degrees clockwise, discarding any
+unrotatable edge pixels:
+.IP
+.B jpegtran \-rot 90 -trim
+.I foo.jpg
+.B >
+.I foo90.jpg
+.SH ENVIRONMENT
+.TP
+.B JPEGMEM
+If this environment variable is set, its value is the default memory limit.
+The value is specified as described for the
+.B \-maxmemory
+switch.
+.B JPEGMEM
+overrides the default value specified when the program was compiled, and
+itself is overridden by an explicit
+.BR \-maxmemory .
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR rdjpgcom (1),
+.BR wrjpgcom (1)
+.br
+Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
+.SH AUTHOR
+Independent JPEG Group
+.PP
+This file was modified by The libjpeg-turbo Project to include only information
+relevant to libjpeg-turbo and to wordsmith certain sections.
+.SH BUGS
+The transform options can't transform odd-size images perfectly.  Use
+.B \-trim
+or
+.B \-perfect
+if you don't like the results.
+.PP
+The entire image is read into memory and then written out again, even in
+cases where this isn't really necessary.  Expect swapping on large images,
+especially when using the more complex transform options.

data/ports/x86_64-apple-darwin15.0.0/mozjpeg/3.1/share/man/man1/rdjpgcom.1

@@ -0,0 +1,63 @@
+.TH RDJPGCOM 1 "02 April 2009"
+.SH NAME
+rdjpgcom \- display text comments from a JPEG file
+.SH SYNOPSIS
+.B rdjpgcom
+[
+.B \-raw
+]
+[
+.B \-verbose
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B rdjpgcom
+reads the named JPEG/JFIF file, or the standard input if no file is named,
+and prints any text comments found in the file on the standard output.
+.PP
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+.SH OPTIONS
+.TP
+.B \-raw
+Normally
+.B rdjpgcom
+escapes non-printable characters in comments, for security reasons.
+This option avoids that.
+.PP
+.B \-verbose
+Causes
+.B rdjpgcom
+to also display the JPEG image dimensions.
+.PP
+Switch names may be abbreviated, and are not case sensitive.
+.SH HINTS
+.B rdjpgcom
+does not depend on the IJG JPEG library.  Its source code is intended as an
+illustration of the minimum amount of code required to parse a JPEG file
+header correctly.
+.PP
+In
+.B \-verbose
+mode,
+.B rdjpgcom
+will also attempt to print the contents of any "APP12" markers as text.
+Some digital cameras produce APP12 markers containing useful textual
+information.  If you like, you can modify the source code to print
+other APPn marker types as well.
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR jpegtran (1),
+.BR wrjpgcom (1)
+.SH AUTHOR
+Independent JPEG Group

data/ports/x86_64-apple-darwin15.0.0/mozjpeg/3.1/share/man/man1/wrjpgcom.1

@@ -0,0 +1,103 @@
+.TH WRJPGCOM 1 "15 June 1995"
+.SH NAME
+wrjpgcom \- insert text comments into a JPEG file
+.SH SYNOPSIS
+.B wrjpgcom
+[
+.B \-replace
+]
+[
+.BI \-comment " text"
+]
+[
+.BI \-cfile " name"
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B wrjpgcom
+reads the named JPEG/JFIF file, or the standard input if no file is named,
+and generates a new JPEG/JFIF file on standard output.  A comment block is
+added to the file.
+.PP
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+.PP
+.B wrjpgcom
+adds a COM block, containing text you provide, to a JPEG file.
+Ordinarily, the COM block is added after any existing COM blocks; but you
+can delete the old COM blocks if you wish.
+.SH OPTIONS
+Switch names may be abbreviated, and are not case sensitive.
+.TP
+.B \-replace
+Delete any existing COM blocks from the file.
+.TP
+.BI \-comment " text"
+Supply text for new COM block on command line.
+.TP
+.BI \-cfile " name"
+Read text for new COM block from named file.
+.PP
+If you have only one line of comment text to add, you can provide it on the
+command line with
+.BR \-comment .
+The comment text must be surrounded with quotes so that it is treated as a
+single argument.  Longer comments can be read from a text file.
+.PP
+If you give neither
+.B \-comment
+nor
+.BR \-cfile ,
+then
+.B wrjpgcom
+will read the comment text from standard input.  (In this case an input image
+file name MUST be supplied, so that the source JPEG file comes from somewhere
+else.)  You can enter multiple lines, up to 64KB worth.  Type an end-of-file
+indicator (usually control-D) to terminate the comment text entry.
+.PP
+.B wrjpgcom
+will not add a COM block if the provided comment string is empty.  Therefore
+\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file.
+.SH EXAMPLES
+.LP
+Add a short comment to in.jpg, producing out.jpg:
+.IP
+.B wrjpgcom \-c
+\fI"View of my back yard" in.jpg
+.B >
+.I out.jpg
+.PP
+Attach a long comment previously stored in comment.txt:
+.IP
+.B wrjpgcom
+.I in.jpg
+.B <
+.I comment.txt
+.B >
+.I out.jpg
+.PP
+or equivalently
+.IP
+.B wrjpgcom
+.B -cfile
+.I comment.txt
+.B <
+.I in.jpg
+.B >
+.I out.jpg
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR jpegtran (1),
+.BR rdjpgcom (1)
+.SH AUTHOR
+Independent JPEG Group