hyrax 5.0.0.rc1 → 5.0.0.rc3

data/.koppie/Gemfile

@@ -1,3 +1,5 @@
+# frozen_string_literal: true
+# Attempts to determine if a global gem source has ready been added by another Gemfile
 if @sources.global_rubygems_source == Bundler::SourceList.new.global_rubygems_source
   Bundler.ui.info '[Koppie] Adding global rubygems source.'
   source 'https://rubygems.org'
@@ -10,15 +12,14 @@ gem 'bootsnap', '>= 1.1.0', require: false
 gem 'bootstrap', '~> 4.0'
 gem 'coffee-rails', '~> 4.2'
 gem 'dalli'
-gem 'devise', '4.8.0'
-gem 'devise-guests', '0.8.1'
-gem 'hydra-role-management'
+gem 'devise'
+gem 'devise-guests', '~> 0.8'
 gemspec name: 'hyrax', path: ENV.fetch('HYRAX_ENGINE_PATH', '..')
 gem 'jbuilder', '~> 2.5'
 gem 'jquery-rails'
 gem 'pg', '~> 1.3'
-gem 'puma', '~> 5.5.2'
-gem 'rails', '~> 6.0'
+gem 'puma'
+gem 'rails', '~> 6.1'
 gem 'riiif', '~> 2.1'
 gem 'rsolr', '>= 1.0', '< 3'
 gem 'sass-rails', '~> 6.0'
@@ -41,11 +42,8 @@ group :development do
 end
 
 group :development, :test do
-  gem 'byebug', platforms: [:mri, :mingw, :x64_mingw]
-  gem "pry-byebug"
-  gem "pry-doc"
-  gem "pry-rails"
-  gem "pry-rescue"
-  gem 'rspec-rails'
-  gem 'solr_wrapper', '>= 0.3'
+  gem 'debug', '>= 1.0.0'
+  gem 'pry-doc'
+  gem 'pry-rails'
+  gem 'pry-rescue'
 end

data/.koppie/Gemfile.koppie

@@ -0,0 +1,2 @@
+# Use dedicated lock files for dassie/koppie to avoid gem mismatches
+eval_gemfile 'Gemfile'

data/.koppie/Rakefile

@@ -4,5 +4,3 @@
 require_relative 'config/application'
 
 Rails.application.load_tasks
-
-require 'solr_wrapper/rake_task' unless Rails.env.production?

data/.koppie/app/listeners/hyrax_listener.rb

@@ -0,0 +1,81 @@
+# frozen_string_literal: true
+
+##
+# Generated by hyrax:listeners
+#
+# The Hyrax engine uses a publish/subscribe programming model to allow
+# pluggable behavior in response to certain repository events. A range of events
+# are published on a topic based event bus.
+#
+# This listener provides a template.
+#
+# For simple use cases, it's fine to add behavior to the `#on_*` methods in this
+# Listener. If you have more than trivial behavior here, you probably want to add
+# new classes that are named narrowly scoped and named for what the listener is
+# for.
+#
+# When writing listener methods, it's important to carefully consider error,
+# handling. Unhandled exceptions short-circuit behavior for other listeners,
+# so it's a good idea to be paying attention to failure cases.
+#
+# @see https://github.com/samvera/hyrax/wiki/Hyrax's-Event-Bus-(Hyrax::Publisher)
+# @see https://www.rubydoc.info/gems/hyrax/Hyrax/Publisher
+# @see https://dry-rb.org/gems/dry-events
+class HyraxListener
+  # def on_batch_created
+  # end
+
+  # def on_collection_deleted
+  # end
+
+  # def on_collection_metadata_updated
+  # end
+
+  # def on_collection_membership_update
+  # end
+
+  # def on_file_characterized
+  # end
+
+  # def on_file_downloaded
+  # end
+
+  # def on_file_metadata_updated
+  # end
+
+  # def on_file_metadata_deleted
+  # end
+
+  # def on_file_uploaded
+  # end
+
+  # def on_file_set_audited
+  # end
+
+  # def on_file_set_attached
+  # end
+
+  # def on_file_set_url_imported
+  # end
+
+  # def on_file_set_restored
+  # end
+
+  # def on_object_deleted
+  # end
+
+  # def on_object_failed_deposit
+  # end
+
+  # def on_object_deposited
+  # end
+
+  # def on_object_acl_updated
+  # end
+
+  # def on_object_membership_updated
+  # end
+
+  # def on_object_metadata_updated
+  # end
+end

data/.koppie/app/models/ability.rb

@@ -1,15 +1,11 @@
 class Ability
   include Hydra::Ability
-  
+
   include Hyrax::Ability
   self.ability_logic += [:everyone_can_create_curation_concerns]
 
   # Define any customized permissions here.
   def custom_permissions
-    if current_user.admin?
-      can [:create, :show, :add_user, :remove_user, :index, :edit, :update, :destroy], Role
-    end
-
     # Limits deleting objects to a the admin user
     #
     # if current_user.admin?

data/.koppie/app/models/collection.rb

@@ -1 +1 @@
-Collection = Hyrax::PcdmCollection
+Collection = CollectionResource

data/.koppie/app/models/user.rb

@@ -1,8 +1,6 @@
 class User < ApplicationRecord
   # Connects this user object to Hydra behaviors.
   include Hydra::User
-  # Connects this user object to Role-management behaviors.
-  include Hydra::RoleManagement::UserRoles
 
   # Connects this user object to Hyrax behaviors.
   include Hyrax::User

data/.koppie/config/analytics.yml

@@ -1,12 +1,12 @@
 analytics:
   google:
     analytics_id: <%= ENV['GOOGLE_ANALYTICS_ID'] %>
-    app_name: <%= ENV.fetch('GOOGLE_OAUTH_APP_NAME', 'nurax-pg') %>
-    app_version: <%= ENV.fetch['GOOGLE_OAUTH_APP_VERSION'] %>
+    app_name: <%= ENV['GOOGLE_OAUTH_APP_NAME'] %>
+    app_version: <%= ENV['GOOGLE_OAUTH_APP_VERSION'] %>
     privkey_value: <%= ENV['GOOGLE_OAUTH_PRIVATE_KEY_VALUE'] %>
-    privkey_path: <%= ENV.fetch['GOOGLE_OAUTH_PRIVATE_KEY_PATH'] %>
-    privkey_secret: <%= ENV.fetch['GOOGLE_OAUTH_PRIVATE_KEY_SECRET'] %>
-    client_email: <%= ENV.fetch['GOOGLE_OAUTH_CLIENT_EMAIL'] %>
+    privkey_path: <%= ENV['GOOGLE_OAUTH_PRIVATE_KEY_PATH'] %>
+    privkey_secret: <%= ENV['GOOGLE_OAUTH_PRIVATE_KEY_SECRET'] %>
+    client_email: <%= ENV['GOOGLE_OAUTH_CLIENT_EMAIL'] %>
   matomo:
     base_url: <%= ENV['MATOMO_BASE_URL'] %>
     site_id: <%= ENV['MATOMO_SITE_ID'] %>

data/.koppie/config/application.rb

@@ -6,7 +6,7 @@ require 'rails/all'
 # you've limited to :test, :development, or :production.
 Bundler.require(*Rails.groups)
 
-module NuraxPg
+module Koppie
   class Application < Rails::Application
     # Initialize configuration defaults for originally generated Rails version.
     config.load_defaults 6.0
@@ -15,6 +15,7 @@ module NuraxPg
     # Application configuration can go into files in config/initializers
     # -- all .rb files in that directory are automatically loaded after loading
     # the framework and any gems in your application.
+    config.session_store :cookie_store, key: "_#{ENV.fetch('APP_NAME', 'koppie')}_session"
 
     # use SideKiq by default
     config.active_job.queue_adapter = :sidekiq

data/.koppie/config/arkivo.yml

@@ -0,0 +1,6 @@
+development:
+  url: http://localhost:8888/
+test:
+  url: http://localhost:8888/
+production:
+  url: http://production.host/

data/.koppie/config/blacklight.yml

@@ -1,9 +1,9 @@
 development:
   adapter: solr
-  url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/nurax-pg-blacklight-dev" %>
+  url: <%= ENV['SOLR_DEVELOPMENT_URL'] || ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/nurax-pg-blacklight-dev" %>
 test: &test
   adapter: solr
-  url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:#{ENV.fetch('SOLR_TEST_PORT', 8985)}/solr/nurax-pg-test" %>
+  url: <%= ENV['SOLR_TEST_URL'] || ENV['SOLR_URL'] || "http://127.0.0.1:#{ENV.fetch('SOLR_TEST_PORT', 8985)}/solr/nurax-pg-test" %>
 production:
   adapter: solr
   url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/nurax-pg" %>

data/.koppie/config/features.yml

@@ -0,0 +1,2 @@
+batch_upload:
+  enabled: "true"

data/.koppie/config/initializers/1_valkyrie.rb

@@ -1,4 +1,5 @@
 # frozen_string_literal: true
+require 'faraday/multipart'
 
 # require "shrine/storage/s3"
 # require "valkyrie/storage/shrine"
@@ -24,9 +25,20 @@
 #             :nurax_pg_metadata_adapter)
 Valkyrie::MetadataAdapter.register(
   Valkyrie::Persistence::Postgres::MetadataAdapter.new,
-  :nurax_pg_metadata_adapter
+  :pg_metadata
 )
-Valkyrie.config.metadata_adapter = :nurax_pg_metadata_adapter
+
+Valkyrie::MetadataAdapter.register(
+  Valkyrie::Persistence::Fedora::MetadataAdapter.new(
+    connection: ::Ldp::Client.new(Hyrax.config.fedora_connection_builder.call(
+      ENV.fetch('FCREPO_URL') { "http://localhost:8080/fcrepo/rest" })),
+    base_path: Rails.env,
+    schema: Valkyrie::Persistence::Fedora::PermissiveSchema.new(Hyrax::SimpleSchemaLoader.new.permissive_schema_for_valkrie_adapter),
+    fedora_version: 6
+  ), :fedora_metadata
+)
+
+Valkyrie.config.metadata_adapter = ENV.fetch('VALKYRIE_METADATA_ADAPTER') { :pg_metadata }.to_sym
 
 # shrine_s3_options = {
 #   bucket: ENV.fetch("REPOSITORY_S3_BUCKET") { "nurax_pg#{Rails.env}" },
@@ -46,11 +58,22 @@ Valkyrie.config.metadata_adapter = :nurax_pg_metadata_adapter
 # )
 #
 # Valkyrie.config.storage_adapter = :repository_s3
+
 Valkyrie::StorageAdapter.register(
-  Valkyrie::Storage::Disk.new(base_path: Rails.root.join("storage", "files"),
-                              file_mover: FileUtils.method(:cp)),
-  :disk
+  Valkyrie::Storage::Fedora.new(
+    connection: ::Ldp::Client.new(Hyrax.config.fedora_connection_builder.call(
+      ENV.fetch('FCREPO_URL') { "http://localhost:8080/fcrepo/rest" })),
+    base_path: Rails.env,
+    fedora_version: 6
+  ), :fedora_storage
 )
-Valkyrie.config.storage_adapter  = :disk
+
+Valkyrie::StorageAdapter.register(
+  Valkyrie::Storage::VersionedDisk.new(base_path: Rails.root.join("storage", "files"),
+                                       file_mover: FileUtils.method(:cp)),
+  :versioned_disk_storage
+)
+
+Valkyrie.config.storage_adapter  = ENV.fetch('VALKYRIE_STORAGE_ADAPTER') { :versioned_disk_storage }.to_sym
 
 Valkyrie.config.indexing_adapter = :solr_index

data/.koppie/config/initializers/arkivo_constraint.rb

@@ -0,0 +1,12 @@
+# frozen_string_literal: true
+module Hyrax
+  class ArkivoConstraint
+    def self.matches?(_request)
+      # Add your own logic here to authorize trusted connections to
+      # the API e.g., if your installation of Arkivo runs on a host
+      # with the 10.0.0.3 IP address, you could use:
+      # request.remote_ip == '10.0.0.3'
+      true
+    end
+  end
+end

data/.koppie/config/initializers/hyrax.rb

@@ -99,7 +99,7 @@ Hyrax.config do |config|
 
   # Hyrax can integrate with Zotero's Arkivo service for automatic deposit
   # of Zotero-managed research items.
-  # config.arkivo_api = false
+  config.arkivo_api = true
 
   # Stream realtime notifications to users in the browser
   # config.realtime_notifications = true
@@ -249,7 +249,7 @@ Hyrax.config do |config|
   # Identify the model class name that will be used for Collections in your app
   # (i.e. ::Collection for ActiveFedora, Hyrax::PcdmCollection for Valkyrie)
   # config.collection_model = '::Collection'
-  config.collection_model = 'Hyrax::PcdmCollection'
+  # config.collection_model = 'Hyrax::PcdmCollection'
   # Injected via `rails g hyrax:collection_resource CollectionResource`
   config.collection_model = 'CollectionResource'
 

data/.koppie/config/initializers/publisher.rb

@@ -0,0 +1,3 @@
+# frozen_string_literal: true
+
+# Hyrax.publisher.subscribe(HyraxListener.new)

data/.koppie/config/initializers/riiif.rb

@@ -1,12 +1,10 @@
 # frozen_string_literal: true
-ActiveSupport::Reloader.to_prepare do
-  Riiif::Image.file_resolver = Riiif::HttpFileResolver.new
+Rails.application.reloader.to_prepare do
   Riiif::Image.info_service = lambda do |id, _file|
     # id will look like a path to a pcdm:file
     # (e.g. rv042t299%2Ffiles%2F6d71677a-4f80-42f1-ae58-ed1063fd79c7)
     # but we just want the id for the FileSet it's attached to.
 
-    # Capture everything before the first slash
     fs_id = id.sub(/\A([^\/]*)\/.*/, '\1')
     resp = Hyrax::SolrService.get("id:#{fs_id}")
     doc = resp['response']['docs'].first
@@ -15,24 +13,99 @@ ActiveSupport::Reloader.to_prepare do
   end
 
   if Hyrax.config.use_valkyrie?
-    # Use Valkyrie adapter to make sure file is available locally. Riiif will just open it then
-    # id comes in with the format "FILE_SET_ID/files/FILE_ID"
-    Riiif::Image.file_resolver.id_to_uri = lambda do |id|
-      file_metadata = Hyrax.query_service.find_by(id: id.split('/').last)
-      file = Hyrax.storage_adapter.find_by(id: file_metadata.file_identifier)
-      file.disk_path.to_s
-    end
+    Riiif::Image.file_resolver = Hyrax::RiiifFileResolver.new
   else
+    Riiif::Image.file_resolver = Riiif::HttpFileResolver.new
+
     Riiif::Image.file_resolver.id_to_uri = lambda do |id|
       Hyrax::Base.id_to_uri(CGI.unescape(id)).tap do |url|
         Rails.logger.info "Riiif resolved #{id} to #{url}"
       end
     end
   end
+
   Riiif::Image.authorization_service = Hyrax::IiifAuthorizationService
 
   Riiif.not_found_image = Rails.root.join('app', 'assets', 'images', 'us_404.svg')
   Riiif.unauthorized_image = Rails.root.join('app', 'assets', 'images', 'us_404.svg')
 
-  Riiif::Engine.config.cache_duration = 365.days
+  Riiif::Engine.config.cache_duration = 1.day
 end
+
+module Hyrax
+  # Adds file locking to Riiif::File
+  # @see RiiifFileResolver
+  class RiiifFile < Riiif::File
+    include ActiveSupport::Benchmarkable
+
+    attr_reader :id
+    def initialize(input_path, tempfile = nil, id:)
+      super(input_path, tempfile)
+      raise(ArgumentError, "must specify id") if id.blank?
+      @id = id
+    end
+
+    # Wrap extract in a read lock and benchmark it
+    def extract(transformation, image_info = nil)
+      Riiif::Image.file_resolver.file_locks[id].with_read_lock do
+        benchmark "RiiifFile extracted #{path} with #{transformation.to_params}", level: :debug do
+          super
+        end
+      end
+    end
+
+    private
+
+    def logger
+      Hyrax.logger
+    end
+  end
+
+  class RiiifFileResolver
+    include ActiveSupport::Benchmarkable
+
+    # @param [String] id from iiif manifest
+    # @return [Riiif::File]
+    def find(id)
+      path = nil
+      file_locks[id].with_write_lock do
+        path = build_path(id)
+        path = build_path(id, force: true) unless File.exist?(path) # Ensures the file is locally available
+      end
+      RiiifFile.new(path, id: id)
+    end
+
+    # tracks individual file locks
+    # @see RiiifFile
+    # @return [Concurrent::Map<Concurrent::ReadWriteLock>]
+    def file_locks
+      @file_locks ||= Concurrent::Map.new do |k, v|
+        k.compute_if_absent(v) { Concurrent::ReadWriteLock.new }
+      end
+    end
+
+    private
+
+    def build_path(id, force: false)
+      Riiif::Image.cache.fetch("riiif:" + Digest::MD5.hexdigest("path:#{id}"),
+                               expires_in: Riiif::Image.expires_in,
+                               force: force) do
+        load_file(id)
+      end
+    end
+
+    def load_file(id)
+      benchmark "RiiifFileResolver loaded #{id}", level: :debug do
+        fs_id = id.sub(/\A([^\/]*)\/.*/, '\1')
+        file_set = Hyrax.query_service.find_by(id: fs_id)
+        file_metadata = Hyrax.custom_queries.find_original_file(file_set: file_set)
+        file_metadata.file.disk_path.to_s # Stores a local copy in tmpdir
+      end
+    end
+
+    def logger
+      Hyrax.logger
+    end
+  end
+end
+

data/.koppie/config/metadata/collection_resource.yaml

@@ -2,6 +2,8 @@
 # index key names, and form properties.
 #
 # Attributes must have a type but all other configuration options are optional.
+# Please note: If using Valkyrie's Fedora Metadata Adapter, predicates for attributes
+# must be placed here.
 #
 # attributes:
 #   attribute_name:
@@ -19,4 +21,20 @@
 # Generated via
 #  `rails generate hyrax:collection_resource CollectionResource`
 
-attributes: {}
+attributes:
+  target_audience:
+    type: string
+    form:
+      primary: true
+      multiple: true
+    predicate: http://hyrax-example.com/target_audience
+  department:
+    type: string
+    form:
+      primary: true
+    predicate: http://hyrax-example.com/department
+  course:
+    type: string
+    form:
+      primary: false
+    predicate: http://hyrax-example.com/course

data/.koppie/config/metadata/generic_work.yaml

@@ -2,6 +2,8 @@
 # index key names, and form properties.
 #
 # Attributes must have a type but all other configuration options are optional.
+# Please note: If using Valkyrie's Fedora Metadata Adapter, predicates for attributes
+# must be placed here.
 #
 # attributes:
 #   attribute_name:

data/.koppie/config/metadata/monograph.yaml

@@ -2,6 +2,8 @@
 # index key names, and form properties.
 #
 # Attributes must have a type but all other configuration options are optional.
+# Please note: If using Valkyrie's Fedora Metadata Adapter, predicates for attributes
+# must be placed here.
 #
 # attributes:
 #   attribute_name:
@@ -23,6 +25,7 @@
 attributes:
   monograph_title:
     type: string
+    predicate: http://hyrax-example.com/monograph_title
   record_info:
     type: string
     form:
@@ -30,26 +33,33 @@ attributes:
       primary: true
     index_keys:
       - "record_info_tesim"
+    predicate: http://hyrax-example.com/record_info
   place_of_publication:
     type: string
     form:
       required: false
       primary: true
+    predicate: http://hyrax-example.com/place_of_publication
   genre:
     type: string
     form:
       primary: true
+    predicate: http://hyrax-example.com/genre
   series_title:
     type: string
     form:
       primary: false
+    predicate: http://hyrax-example.com/series_title
   target_audience:
     type: string
     form:
       multiple: true
+    predicate: http://hyrax-example.com/target_audience
   table_of_contents:
     type: string
     form:
       multiple: false
+    predicate: http://hyrax-example.com/table_of_contents
   date_of_issuance:
     type: string
+    predicate: http://hyrax-example.com/date_of_issuance

data/.koppie/config/metadata/sample_metadata.yaml

@@ -0,0 +1,4 @@
+attributes:
+  sample_attribute:
+    type: string
+    predicate: http://hyrax-example.com/sample_attribute

data/.koppie/config/role_map.yml

@@ -1,28 +1,6 @@
-# nurax-pg uses Hydra::RoleManagement for user and role definition.  The following
-# examples show how to perform common setup actions.
-#
-# @see https://github.com/samvera/hydra-role-management
-#
-# Create admin role
-#
-#   admin_role = Role.find_or_create_by(name: 'admin')
-#
-# Create a user
-#
-#   admin_user = User.find_or_create_by(email: 'user@example.com') do |user|
-#     user.password = 'change_me'
-#     user.password_confirmation = 'change_me'
-#     user.confirmed_at = DateTime.now
-#   end
-#   admin_user.roles << admin_role unless admin_user.roles.include?(admin_role)
-#   admin_user.save!(validate: false)
-#
-# You can create non-admin roles and assign users to those roles using a similar pattern.
-#
-# The following roles might be used for testing, so they remain here.  They will not
-# be available for use when logged in through the browser.
-#
 development:
+  admin:
+    - admin@example.com
   archivist:
     - archivist1@example.com
 
@@ -45,4 +23,4 @@ test:
 
 production:
   admin:
-    - systems@curationexperts.com
+    - admin@example.com

data/.koppie/config/routes.rb

@@ -5,14 +5,13 @@ Rails.application.routes.draw do
         mount BrowseEverything::Engine => '/browse'
 
   mount Blacklight::Engine => '/'
-  
+
   concern :searchable, Blacklight::Routes::Searchable.new
 
   resource :catalog, only: [:index], as: 'catalog', path: '/catalog', controller: 'catalog' do
     concerns :searchable
   end
   devise_for :users
-  mount Hydra::RoleManagement::Engine => '/'
   mount Sidekiq::Web => '/sidekiq'
   mount Qa::Engine => '/authorities'
   mount Hyrax::Engine, at: '/'

data/.koppie/config/solr.yml

@@ -2,6 +2,6 @@
 development:
   url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/nurax-pg-solr-dev" %>
 test: &test
-  url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:#{ENV.fetch('SOLR_TEST_PORT', 8985)}/solr/nurax-pg-test" %>
+  url: <%= ENV['TEST_SOLR_URL'] ||ENV['SOLR_URL'] || "http://127.0.0.1:#{ENV.fetch('SOLR_TEST_PORT', 8985)}/solr/nurax-pg-test" %>
 production:
   url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/nurax-pg" %>

data/.koppie/config/valkyrie_index.yml

@@ -1,12 +1,6 @@
 development:
-  host: <%= ENV['VALKYRIE_SOLR_HOST'] || 'localhost' %>
-  port: <%= ENV['VALKYRIE_SOLR_PORT'] || 8987 %>
-  core: <%= ENV['VALKYRIE_SOLR_CORE'] || 'nurax-pg-valkyrie-dev' %>
-test:
-  host: <%= ENV['VALKYRIE_SOLR_HOST'] || 'localhost' %>
-  port: <%= ENV['VALKYRIE_SOLR_PORT'] || 8987 %>
-  core: <%= ENV['VALKYRIE_SOLR_CORE'] || 'nurax-pg-test' %>
+  url: <%= ENV['SOLR_DEVELOPMENT_URL'] || ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/koppie" %>
+test: &test
+  url: <%= ENV['SOLR_TEST_URL'] || ENV['SOLR_URL'] || "http://127.0.0.1:#{ENV.fetch('SOLR_TEST_PORT', 8985)}/solr/koppie-test" %>
 production:
-  host: <%= ENV['VALKYRIE_SOLR_HOST'] %>
-  port: <%= ENV['VALKYRIE_SOLR_PORT'] %>
-  core: <%= ENV['VALKYRIE_SOLR_CORE'] %>
+  url: <%= ENV['SOLR_URL'] || "http://127.0.0.1:8983/solr/koppie-prod" %>

data/.koppie/config/zotero.yml

@@ -0,0 +1,6 @@
+#
+# To integrate your app with Zotero, set ENV variables with your API info
+#
+zotero:
+  client_key: <%= ENV["ZOTERO_CLIENT_KEY"] %>
+  client_secret: <%= ENV["ZOTERO_CLIENT_SECRET"] %>

data/.koppie/db/migrate/20230725222727_create_hyrax_counter_metrics.hyrax.rb

@@ -0,0 +1,14 @@
+class CreateHyraxCounterMetrics < ActiveRecord::Migration[6.0]
+  def change
+    create_table :hyrax_counter_metrics do |t|
+      t.string :worktype
+      t.string :resource_type
+      t.integer :work_id
+      t.date :date
+      t.integer :total_item_investigations
+      t.integer :total_item_requests
+
+      t.timestamps
+    end
+  end
+end

data/.koppie/db/migrate/20230803165135_change_work_id_to_string.rb

@@ -0,0 +1,5 @@
+class ChangeWorkIdToString < ActiveRecord::Migration[6.1]
+  def change
+    change_column :hyrax_counter_metrics, :work_id, :string
+  end
+end