honeybadger 5.4.0 → 5.4.1

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations/failure_aggregator.rb

@@ -1,229 +0,0 @@
-module RSpec
-  module Expectations
-    # @private
-    class FailureAggregator
-      attr_reader :block_label, :metadata
-
-      # @private
-      class AggregatedFailure
-        # @private
-        MESSAGE =
-          'AggregatedFailure: This method caused a failure which has been ' \
-          'suppressed to be aggregated into our failure report by returning ' \
-          'this value, further errors can be ignored.'
-
-        def inspect
-          MESSAGE
-        end
-      end
-
-      AGGREGATED_FAILURE = AggregatedFailure.new
-
-      def aggregate
-        RSpec::Support.with_failure_notifier(self) do
-          begin
-            yield
-          rescue ExpectationNotMetError => e
-            # Normally, expectation failures will be notified via the `call` method, below,
-            # but since the failure notifier uses a thread local variable, failing expectations
-            # in another thread will still raise. We handle that here and categorize it as part
-            # of `failures` rather than letting it fall through and be categorized as part of
-            # `other_errors`.
-            failures << e
-          rescue Support::AllExceptionsExceptOnesWeMustNotRescue => e
-            # While it is normally a bad practice to rescue `Exception`, it's important we do
-            # so here. It's low risk (`notify_aggregated_failures` below will re-raise the exception,
-            # or raise a `MultipleExpectationsNotMetError` that includes the exception), and it's
-            # essential that the user is notified of expectation failures that may have already
-            # occurred in the `aggregate_failures` block. Those expectation failures may provide
-            # important diagnostics for understanding why this exception occurred, and if we simply
-            # allowed this exception to be raised as-is, it would (wrongly) suggest to the user
-            # that the expectation passed when it did not, which would be quite confusing.
-            other_errors << e
-          end
-        end
-
-        notify_aggregated_failures
-      end
-
-      def failures
-        @failures ||= []
-      end
-
-      def other_errors
-        @other_errors ||= []
-      end
-
-      # This method is defined to satisfy the callable interface
-      # expected by `RSpec::Support.with_failure_notifier`.
-      def call(failure, options)
-        source_id = options[:source_id]
-        return if source_id && @seen_source_ids.key?(source_id)
-
-        @seen_source_ids[source_id] = true
-        assign_backtrace(failure) unless failure.backtrace
-        failures << failure
-
-        AGGREGATED_FAILURE
-      end
-
-    private
-
-      if RSpec::Support::Ruby.jruby? && RSpec::Support::Ruby.jruby_version < '9.2.0.0'
-        # On JRuby 9.1.x.x and before, `caller` and `raise` produce different backtraces with
-        # regards to `.java` stack frames. It's important that we use `raise` for JRuby to produce
-        # a backtrace that has a continuous common section with the raised `MultipleExpectationsNotMetError`,
-        # so that rspec-core's truncation logic can work properly on it to list the backtrace
-        # relative to the `aggregate_failures` block.
-        def assign_backtrace(failure)
-          raise failure
-        rescue failure.class => e
-          failure.set_backtrace(e.backtrace)
-        end
-      else
-        # Using `caller` performs better (and is simpler) than `raise` on most Rubies.
-        def assign_backtrace(failure)
-          failure.set_backtrace(caller)
-        end
-      end
-
-      def initialize(block_label, metadata)
-        @block_label     = block_label
-        @metadata        = metadata
-        @seen_source_ids = {} # don't want to load stdlib set
-      end
-
-      def notify_aggregated_failures
-        all_errors = failures + other_errors
-
-        case all_errors.size
-        when 0 then return true
-        when 1 then RSpec::Support.notify_failure all_errors.first
-        else RSpec::Support.notify_failure MultipleExpectationsNotMetError.new(self)
-        end
-      end
-    end
-
-    # Exception raised from `aggregate_failures` when multiple expectations fail.
-    class MultipleExpectationsNotMetError
-      # @return [String] The fully formatted exception message.
-      def message
-        @message ||= (["#{summary}:"] + enumerated_failures + enumerated_errors).join("\n\n")
-      end
-
-      # @return [Array<RSpec::Expectations::ExpectationNotMetError>] The list of expectation failures.
-      def failures
-        @failure_aggregator.failures
-      end
-
-      # @return [Array<Exception>] The list of other exceptions.
-      def other_errors
-        @failure_aggregator.other_errors
-      end
-
-      # @return [Array<Exception>] The list of expectation failures and other exceptions, combined.
-      attr_reader :all_exceptions
-
-      # @return [String] The user-assigned label for the aggregation block.
-      def aggregation_block_label
-        @failure_aggregator.block_label
-      end
-
-      # @return [Hash] The metadata hash passed to `aggregate_failures`.
-      def aggregation_metadata
-        @failure_aggregator.metadata
-      end
-
-      # @return [String] A summary of the failure, including the block label and a count of failures.
-      def summary
-        "Got #{exception_count_description} from failure aggregation " \
-        "block#{block_description}"
-      end
-
-      # return [String] A description of the failure/error counts.
-      def exception_count_description
-        failure_count = pluralize("failure", failures.size)
-        return failure_count if other_errors.empty?
-        error_count = pluralize("other error", other_errors.size)
-        "#{failure_count} and #{error_count}"
-      end
-
-    private
-
-      def initialize(failure_aggregator)
-        @failure_aggregator = failure_aggregator
-        @all_exceptions = failures + other_errors
-      end
-
-      def block_description
-        return "" unless aggregation_block_label
-        " #{aggregation_block_label.inspect}"
-      end
-
-      def pluralize(noun, count)
-        "#{count} #{noun}#{'s' unless count == 1}"
-      end
-
-      def enumerated(exceptions, index_offset)
-        exceptions.each_with_index.map do |exception, index|
-          index += index_offset
-          formatted_message = "#{yield exception}\n#{format_backtrace(exception.backtrace).first}"
-          "#{index_label index}#{indented formatted_message, index}"
-        end
-      end
-
-      def exclusion_patterns
-        patterns = %w[/lib\d*/ruby/ bin/ exe/rspec /lib/bundler/ /exe/bundle:]
-        patterns << "org/jruby/" if RSpec::Support::Ruby.jruby?
-        patterns.map! { |s| Regexp.new(s.gsub('/', File::SEPARATOR)) }
-      end
-
-      def format_backtrace(backtrace)
-        backtrace.map { |l| backtrace_line(l) }.compact.tap { |filtered| filtered.concat backtrace if filtered.empty? }
-      end
-
-      def backtrace_line(line)
-        return if [Regexp.union(RSpec::CallerFilter::IGNORE_REGEX, *exclusion_patterns)].any? { |p| line =~ p }
-
-        # It changes the current path that is relative to
-        # system root to be relative to the project root.
-        line.sub(/(\A|\s)#{File.expand_path('.')}(#{File::SEPARATOR}|\s|\Z)/, '\\1.\\2'.freeze).sub(/\A([^:]+:\d+)$/, '\\1'.freeze)
-      end
-
-      def enumerated_failures
-        enumerated(failures, 0, &:message)
-      end
-
-      def enumerated_errors
-        enumerated(other_errors, failures.size) do |error|
-          "#{error.class}: #{error.message}"
-        end
-      end
-
-      def indented(failure_message, index)
-        line_1, *rest = failure_message.strip.lines.to_a
-        first_line_indentation = ' ' * (longest_index_label_width - width_of_label(index))
-
-        first_line_indentation + line_1 + rest.map do |line|
-          line =~ /\S/ ? indentation + line : line
-        end.join
-      end
-
-      def indentation
-        @indentation ||= ' ' * longest_index_label_width
-      end
-
-      def longest_index_label_width
-        @longest_index_label_width ||= width_of_label(failures.size)
-      end
-
-      def width_of_label(index)
-        index_label(index).chars.count
-      end
-
-      def index_label(index)
-        "  #{index + 1}) "
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations/handler.rb

@@ -1,182 +0,0 @@
-module RSpec
-  module Expectations
-    # @private
-    module ExpectationHelper
-      def self.check_message(msg)
-        unless msg.nil? || msg.respond_to?(:to_str) || msg.respond_to?(:call)
-          ::Kernel.warn [
-            "WARNING: ignoring the provided expectation message argument (",
-            msg.inspect,
-            ") since it is not a string or a proc."
-          ].join
-        end
-      end
-
-      # Returns an RSpec-3+ compatible matcher, wrapping a legacy one
-      # in an adapter if necessary.
-      #
-      # @private
-      def self.modern_matcher_from(matcher)
-        LegacyMatcherAdapter::RSpec2.wrap(matcher) ||
-        LegacyMatcherAdapter::RSpec1.wrap(matcher) || matcher
-      end
-
-      def self.with_matcher(handler, matcher, message)
-        check_message(message)
-        matcher = modern_matcher_from(matcher)
-        yield matcher
-      ensure
-        ::RSpec::Matchers.last_expectation_handler = handler
-        ::RSpec::Matchers.last_matcher = matcher
-      end
-
-      def self.handle_failure(matcher, message, failure_message_method)
-        message = message.call if message.respond_to?(:call)
-        message ||= matcher.__send__(failure_message_method)
-
-        if matcher.respond_to?(:diffable?) && matcher.diffable?
-          ::RSpec::Expectations.fail_with message, matcher.expected, matcher.actual
-        else
-          ::RSpec::Expectations.fail_with message
-        end
-      end
-    end
-
-    # @private
-    class PositiveExpectationHandler
-      def self.handle_matcher(actual, initial_matcher, custom_message=nil, &block)
-        ExpectationHelper.with_matcher(self, initial_matcher, custom_message) do |matcher|
-          return ::RSpec::Matchers::BuiltIn::PositiveOperatorMatcher.new(actual) unless initial_matcher
-
-          match_result = matcher.matches?(actual, &block)
-          if custom_message && match_result.respond_to?(:error_generator)
-            match_result.error_generator.opts[:message] = custom_message
-          end
-
-          match_result || ExpectationHelper.handle_failure(matcher, custom_message, :failure_message)
-        end
-      end
-
-      def self.verb
-        'is expected to'
-      end
-
-      def self.should_method
-        :should
-      end
-
-      def self.opposite_should_method
-        :should_not
-      end
-    end
-
-    # @private
-    class NegativeExpectationHandler
-      def self.handle_matcher(actual, initial_matcher, custom_message=nil, &block)
-        ExpectationHelper.with_matcher(self, initial_matcher, custom_message) do |matcher|
-          return ::RSpec::Matchers::BuiltIn::NegativeOperatorMatcher.new(actual) unless initial_matcher
-
-          negated_match_result = does_not_match?(matcher, actual, &block)
-          if custom_message && negated_match_result.respond_to?(:error_generator)
-            negated_match_result.error_generator.opts[:message] = custom_message
-          end
-
-          negated_match_result || ExpectationHelper.handle_failure(matcher, custom_message, :failure_message_when_negated)
-        end
-      end
-
-      def self.does_not_match?(matcher, actual, &block)
-        if matcher.respond_to?(:does_not_match?)
-          matcher.does_not_match?(actual, &block)
-        else
-          !matcher.matches?(actual, &block)
-        end
-      end
-
-      def self.verb
-        'is expected not to'
-      end
-
-      def self.should_method
-        :should_not
-      end
-
-      def self.opposite_should_method
-        :should
-      end
-    end
-
-    # Wraps a matcher written against one of the legacy protocols in
-    # order to present the current protocol.
-    #
-    # @private
-    class LegacyMatcherAdapter < Matchers::MatcherDelegator
-      def initialize(matcher)
-        super
-        ::RSpec.warn_deprecation(<<-EOS.gsub(/^\s+\|/, ''), :type => "legacy_matcher")
-          |#{matcher.class.name || matcher.inspect} implements a legacy RSpec matcher
-          |protocol. For the current protocol you should expose the failure messages
-          |via the `failure_message` and `failure_message_when_negated` methods.
-          |(Used from #{CallerFilter.first_non_rspec_line})
-        EOS
-      end
-
-      def self.wrap(matcher)
-        new(matcher) if interface_matches?(matcher)
-      end
-
-      # Starting in RSpec 1.2 (and continuing through all 2.x releases),
-      # the failure message protocol was:
-      #   * `failure_message_for_should`
-      #   * `failure_message_for_should_not`
-      # @private
-      class RSpec2 < self
-        def failure_message
-          base_matcher.failure_message_for_should
-        end
-
-        def failure_message_when_negated
-          base_matcher.failure_message_for_should_not
-        end
-
-        def self.interface_matches?(matcher)
-          (
-            !matcher.respond_to?(:failure_message) &&
-            matcher.respond_to?(:failure_message_for_should)
-          ) || (
-            !matcher.respond_to?(:failure_message_when_negated) &&
-            matcher.respond_to?(:failure_message_for_should_not)
-          )
-        end
-      end
-
-      # Before RSpec 1.2, the failure message protocol was:
-      #   * `failure_message`
-      #   * `negative_failure_message`
-      # @private
-      class RSpec1 < self
-        def failure_message
-          base_matcher.failure_message
-        end
-
-        def failure_message_when_negated
-          base_matcher.negative_failure_message
-        end
-
-        # Note: `failure_message` is part of the RSpec 3 protocol
-        # (paired with `failure_message_when_negated`), so we don't check
-        # for `failure_message` here.
-        def self.interface_matches?(matcher)
-          !matcher.respond_to?(:failure_message_when_negated) &&
-          matcher.respond_to?(:negative_failure_message)
-        end
-      end
-    end
-
-    # RSpec 3.0 was released with the class name misspelled. For SemVer compatibility,
-    # we will provide this misspelled alias until 4.0.
-    # @deprecated Use LegacyMatcherAdapter instead.
-    # @private
-    LegacyMacherAdapter = LegacyMatcherAdapter
-  end
-end

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations/minitest_integration.rb

@@ -1,58 +0,0 @@
-require 'rspec/expectations'
-
-Minitest::Test.class_eval do
-  include ::RSpec::Matchers
-
-  # This `expect` will only be called if the user is using Minitest < 5.6
-  # or if they are _not_ using Minitest::Spec on 5.6+. Minitest::Spec on 5.6+
-  # defines its own `expect` and will have the assertions incremented via our
-  # definitions of `to`/`not_to`/`to_not` below.
-  def expect(*a, &b)
-    self.assertions += 1
-    super
-  end
-
-  # Convert a `MultipleExpectationsNotMetError` to a `Minitest::Assertion` error so
-  # it gets counted in minitest's summary stats as a failure rather than an error.
-  # It would be nice to make `MultipleExpectationsNotMetError` subclass
-  # `Minitest::Assertion`, but Minitest's implementation does not treat subclasses
-  # the same, so this is the best we can do.
-  def aggregate_failures(*args, &block)
-    super
-  rescue RSpec::Expectations::MultipleExpectationsNotMetError => e
-    assertion_failed = Minitest::Assertion.new(e.message)
-    assertion_failed.set_backtrace e.backtrace
-    raise assertion_failed
-  end
-end
-
-# Older versions of Minitest (e.g. before 5.6) do not define
-# `Minitest::Expectation`.
-if defined?(::Minitest::Expectation)
-  Minitest::Expectation.class_eval do
-    include RSpec::Expectations::ExpectationTarget::InstanceMethods
-
-    def to(*args)
-      ctx.assertions += 1
-      super
-    end
-
-    def not_to(*args)
-      ctx.assertions += 1
-      super
-    end
-
-    def to_not(*args)
-      ctx.assertions += 1
-      super
-    end
-  end
-end
-
-module RSpec
-  module Expectations
-    remove_const :ExpectationNotMetError
-    # Exception raised when an expectation fails.
-    const_set :ExpectationNotMetError, ::Minitest::Assertion
-  end
-end

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations/syntax.rb

@@ -1,132 +0,0 @@
-module RSpec
-  module Expectations
-    # @api private
-    # Provides methods for enabling and disabling the available
-    # syntaxes provided by rspec-expectations.
-    module Syntax
-      module_function
-
-      # @api private
-      # Determines where we add `should` and `should_not`.
-      def default_should_host
-        @default_should_host ||= ::Object.ancestors.last
-      end
-
-      # @api private
-      # Instructs rspec-expectations to warn on first usage of `should` or `should_not`.
-      # Enabled by default. This is largely here to facilitate testing.
-      def warn_about_should!
-        @warn_about_should = true
-      end
-
-      # @api private
-      # Generates a deprecation warning for the given method if no warning
-      # has already been issued.
-      def warn_about_should_unless_configured(method_name)
-        return unless @warn_about_should
-
-        RSpec.deprecate(
-          "Using `#{method_name}` from rspec-expectations' old `:should` syntax without explicitly enabling the syntax",
-          :replacement => "the new `:expect` syntax or explicitly enable `:should` with `config.expect_with(:rspec) { |c| c.syntax = :should }`"
-        )
-
-        @warn_about_should = false
-      end
-
-      # @api private
-      # Enables the `should` syntax.
-      def enable_should(syntax_host=default_should_host)
-        @warn_about_should = false if syntax_host == default_should_host
-        return if should_enabled?(syntax_host)
-
-        syntax_host.module_exec do
-          def should(matcher=nil, message=nil, &block)
-            ::RSpec::Expectations::Syntax.warn_about_should_unless_configured(::Kernel.__method__)
-            ::RSpec::Expectations::PositiveExpectationHandler.handle_matcher(self, matcher, message, &block)
-          end
-
-          def should_not(matcher=nil, message=nil, &block)
-            ::RSpec::Expectations::Syntax.warn_about_should_unless_configured(::Kernel.__method__)
-            ::RSpec::Expectations::NegativeExpectationHandler.handle_matcher(self, matcher, message, &block)
-          end
-        end
-      end
-
-      # @api private
-      # Disables the `should` syntax.
-      def disable_should(syntax_host=default_should_host)
-        return unless should_enabled?(syntax_host)
-
-        syntax_host.module_exec do
-          undef should
-          undef should_not
-        end
-      end
-
-      # @api private
-      # Enables the `expect` syntax.
-      def enable_expect(syntax_host=::RSpec::Matchers)
-        return if expect_enabled?(syntax_host)
-
-        syntax_host.module_exec do
-          def expect(value=::RSpec::Expectations::ExpectationTarget::UndefinedValue, &block)
-            ::RSpec::Expectations::ExpectationTarget.for(value, block)
-          end
-        end
-      end
-
-      # @api private
-      # Disables the `expect` syntax.
-      def disable_expect(syntax_host=::RSpec::Matchers)
-        return unless expect_enabled?(syntax_host)
-
-        syntax_host.module_exec do
-          undef expect
-        end
-      end
-
-      # @api private
-      # Indicates whether or not the `should` syntax is enabled.
-      def should_enabled?(syntax_host=default_should_host)
-        syntax_host.method_defined?(:should)
-      end
-
-      # @api private
-      # Indicates whether or not the `expect` syntax is enabled.
-      def expect_enabled?(syntax_host=::RSpec::Matchers)
-        syntax_host.method_defined?(:expect)
-      end
-    end
-  end
-end
-
-if defined?(BasicObject)
-  # The legacy `:should` syntax adds the following methods directly to
-  # `BasicObject` so that they are available off of any object. Note, however,
-  # that this syntax does not always play nice with delegate/proxy objects.
-  # We recommend you use the non-monkeypatching `:expect` syntax instead.
-  class BasicObject
-    # @method should(matcher, message)
-    # Passes if `matcher` returns true.  Available on every `Object`.
-    # @example
-    #   actual.should eq expected
-    #   actual.should match /expression/
-    # @param [Matcher]
-    #   matcher
-    # @param [String] message optional message to display when the expectation fails
-    # @return [Boolean] true if the expectation succeeds (else raises)
-    # @note This is only available when you have enabled the `:should` syntax.
-    # @see RSpec::Matchers
-
-    # @method should_not(matcher, message)
-    # Passes if `matcher` returns false.  Available on every `Object`.
-    # @example
-    #   actual.should_not eq expected
-    # @param [Matcher]
-    #   matcher
-    # @param [String] message optional message to display when the expectation fails
-    # @return [Boolean] false if the negative expectation succeeds (else raises)
-    # @note This is only available when you have enabled the `:should` syntax.
-    # @see RSpec::Matchers
-  end
-end

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations/version.rb

@@ -1,8 +0,0 @@
-module RSpec
-  module Expectations
-    # @private
-    module Version
-      STRING = '3.12.3'
-    end
-  end
-end

data/vendor/bundle/ruby/3.2.0/gems/rspec-expectations-3.12.3/lib/rspec/expectations.rb

@@ -1,82 +0,0 @@
-require 'rspec/support'
-RSpec::Support.require_rspec_support "caller_filter"
-RSpec::Support.require_rspec_support "warnings"
-RSpec::Support.require_rspec_support "object_formatter"
-
-require 'rspec/matchers'
-
-RSpec::Support.define_optimized_require_for_rspec(:expectations) { |f| require_relative(f) }
-
-%w[
-  expectation_target
-  configuration
-  fail_with
-  handler
-  version
-].each { |file| RSpec::Support.require_rspec_expectations(file) }
-
-module RSpec
-  # RSpec::Expectations provides a simple, readable API to express
-  # the expected outcomes in a code example. To express an expected
-  # outcome, wrap an object or block in `expect`, call `to` or `to_not`
-  # (aliased as `not_to`) and pass it a matcher object:
-  #
-  #     expect(order.total).to eq(Money.new(5.55, :USD))
-  #     expect(list).to include(user)
-  #     expect(message).not_to match(/foo/)
-  #     expect { do_something }.to raise_error
-  #
-  # The last form (the block form) is needed to match against ruby constructs
-  # that are not objects, but can only be observed when executing a block
-  # of code. This includes raising errors, throwing symbols, yielding,
-  # and changing values.
-  #
-  # When `expect(...).to` is invoked with a matcher, it turns around
-  # and calls `matcher.matches?(<object wrapped by expect>)`.  For example,
-  # in the expression:
-  #
-  #     expect(order.total).to eq(Money.new(5.55, :USD))
-  #
-  # ...`eq(Money.new(5.55, :USD))` returns a matcher object, and it results
-  # in the equivalent of `eq.matches?(order.total)`. If `matches?` returns
-  # `true`, the expectation is met and execution continues. If `false`, then
-  # the spec fails with the message returned by `eq.failure_message`.
-  #
-  # Given the expression:
-  #
-  #     expect(order.entries).not_to include(entry)
-  #
-  # ...the `not_to` method (also available as `to_not`) invokes the equivalent of
-  # `include.matches?(order.entries)`, but it interprets `false` as success, and
-  # `true` as a failure, using the message generated by
-  # `include.failure_message_when_negated`.
-  #
-  # rspec-expectations ships with a standard set of useful matchers, and writing
-  # your own matchers is quite simple.
-  #
-  # See [RSpec::Matchers](../RSpec/Matchers) for more information about the
-  # built-in matchers that ship with rspec-expectations, and how to write your
-  # own custom matchers.
-  module Expectations
-    # Exception raised when an expectation fails.
-    #
-    # @note We subclass Exception so that in a stub implementation if
-    # the user sets an expectation, it can't be caught in their
-    # code by a bare `rescue`.
-    # @api public
-    class ExpectationNotMetError < Exception
-    end
-
-    # Exception raised from `aggregate_failures` when multiple expectations fail.
-    #
-    # @note The constant is defined here but the extensive logic of this class
-    #   is lazily defined when `FailureAggregator` is autoloaded, since we do
-    #   not need to waste time defining that functionality unless
-    #   `aggregate_failures` is used.
-    class MultipleExpectationsNotMetError < ExpectationNotMetError
-    end
-
-    autoload :BlockSnippetExtractor, "rspec/expectations/block_snippet_extractor"
-    autoload :FailureAggregator,     "rspec/expectations/failure_aggregator"
-  end
-end