hiredis-client 0.4.0

data/ext/redis_client/hiredis/vendor/hiredis.h

@@ -0,0 +1,336 @@
+/*
+ * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
+ * Copyright (c) 2010-2014, Pieter Noordhuis <pcnoordhuis at gmail dot com>
+ * Copyright (c) 2015, Matt Stancliff <matt at genges dot com>,
+ *                     Jan-Erik Rediger <janerik at fnordig dot com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright notice,
+ *     this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *   * Neither the name of Redis nor the names of its contributors may be used
+ *     to endorse or promote products derived from this software without
+ *     specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __HIREDIS_H
+#define __HIREDIS_H
+#include "read.h"
+#include <stdarg.h> /* for va_list */
+#ifndef _MSC_VER
+#include <sys/time.h> /* for struct timeval */
+#else
+struct timeval; /* forward declaration */
+typedef long long ssize_t;
+#endif
+#include <stdint.h> /* uintXX_t, etc */
+#include "sds.h" /* for sds */
+#include "alloc.h" /* for allocation wrappers */
+
+#define HIREDIS_MAJOR 1
+#define HIREDIS_MINOR 0
+#define HIREDIS_PATCH 2
+#define HIREDIS_SONAME 1.0.0
+
+/* Connection type can be blocking or non-blocking and is set in the
+ * least significant bit of the flags field in redisContext. */
+#define REDIS_BLOCK 0x1
+
+/* Connection may be disconnected before being free'd. The second bit
+ * in the flags field is set when the context is connected. */
+#define REDIS_CONNECTED 0x2
+
+/* The async API might try to disconnect cleanly and flush the output
+ * buffer and read all subsequent replies before disconnecting.
+ * This flag means no new commands can come in and the connection
+ * should be terminated once all replies have been read. */
+#define REDIS_DISCONNECTING 0x4
+
+/* Flag specific to the async API which means that the context should be clean
+ * up as soon as possible. */
+#define REDIS_FREEING 0x8
+
+/* Flag that is set when an async callback is executed. */
+#define REDIS_IN_CALLBACK 0x10
+
+/* Flag that is set when the async context has one or more subscriptions. */
+#define REDIS_SUBSCRIBED 0x20
+
+/* Flag that is set when monitor mode is active */
+#define REDIS_MONITORING 0x40
+
+/* Flag that is set when we should set SO_REUSEADDR before calling bind() */
+#define REDIS_REUSEADDR 0x80
+
+/**
+ * Flag that indicates the user does not want the context to
+ * be automatically freed upon error
+ */
+#define REDIS_NO_AUTO_FREE 0x200
+
+#define REDIS_KEEPALIVE_INTERVAL 15 /* seconds */
+
+/* number of times we retry to connect in the case of EADDRNOTAVAIL and
+ * SO_REUSEADDR is being used. */
+#define REDIS_CONNECT_RETRIES  10
+
+/* Forward declarations for structs defined elsewhere */
+struct redisAsyncContext;
+struct redisContext;
+
+/* RESP3 push helpers and callback prototypes */
+#define redisIsPushReply(r) (((redisReply*)(r))->type == REDIS_REPLY_PUSH)
+typedef void (redisPushFn)(void *, void *);
+typedef void (redisAsyncPushFn)(struct redisAsyncContext *, void *);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* This is the reply object returned by redisCommand() */
+typedef struct redisReply {
+    int type; /* REDIS_REPLY_* */
+    long long integer; /* The integer when type is REDIS_REPLY_INTEGER */
+    double dval; /* The double when type is REDIS_REPLY_DOUBLE */
+    size_t len; /* Length of string */
+    char *str; /* Used for REDIS_REPLY_ERROR, REDIS_REPLY_STRING
+                  REDIS_REPLY_VERB, and REDIS_REPLY_DOUBLE (in additional to dval). */
+    char vtype[4]; /* Used for REDIS_REPLY_VERB, contains the null
+                      terminated 3 character content type, such as "txt". */
+    size_t elements; /* number of elements, for REDIS_REPLY_ARRAY */
+    struct redisReply **element; /* elements vector for REDIS_REPLY_ARRAY */
+} redisReply;
+
+redisReader *redisReaderCreate(void);
+
+/* Function to free the reply objects hiredis returns by default. */
+void freeReplyObject(void *reply);
+
+/* Functions to format a command according to the protocol. */
+int redisvFormatCommand(char **target, const char *format, va_list ap);
+int redisFormatCommand(char **target, const char *format, ...);
+int redisFormatCommandArgv(char **target, int argc, const char **argv, const size_t *argvlen);
+int redisFormatSdsCommandArgv(sds *target, int argc, const char ** argv, const size_t *argvlen);
+void redisFreeCommand(char *cmd);
+void redisFreeSdsCommand(sds cmd);
+
+enum redisConnectionType {
+    REDIS_CONN_TCP,
+    REDIS_CONN_UNIX,
+    REDIS_CONN_USERFD
+};
+
+struct redisSsl;
+
+#define REDIS_OPT_NONBLOCK 0x01
+#define REDIS_OPT_REUSEADDR 0x02
+
+/**
+ * Don't automatically free the async object on a connection failure,
+ * or other implicit conditions. Only free on an explicit call to disconnect() or free()
+ */
+#define REDIS_OPT_NOAUTOFREE 0x04
+
+/* Don't automatically intercept and free RESP3 PUSH replies. */
+#define REDIS_OPT_NO_PUSH_AUTOFREE 0x08
+
+/* In Unix systems a file descriptor is a regular signed int, with -1
+ * representing an invalid descriptor. In Windows it is a SOCKET
+ * (32- or 64-bit unsigned integer depending on the architecture), where
+ * all bits set (~0) is INVALID_SOCKET.  */
+#ifndef _WIN32
+typedef int redisFD;
+#define REDIS_INVALID_FD -1
+#else
+#ifdef _WIN64
+typedef unsigned long long redisFD; /* SOCKET = 64-bit UINT_PTR */
+#else
+typedef unsigned long redisFD;      /* SOCKET = 32-bit UINT_PTR */
+#endif
+#define REDIS_INVALID_FD ((redisFD)(~0)) /* INVALID_SOCKET */
+#endif
+
+typedef struct {
+    /*
+     * the type of connection to use. This also indicates which
+     * `endpoint` member field to use
+     */
+    int type;
+    /* bit field of REDIS_OPT_xxx */
+    int options;
+    /* timeout value for connect operation. If NULL, no timeout is used */
+    const struct timeval *connect_timeout;
+    /* timeout value for commands. If NULL, no timeout is used.  This can be
+     * updated at runtime with redisSetTimeout/redisAsyncSetTimeout. */
+    const struct timeval *command_timeout;
+    union {
+        /** use this field for tcp/ip connections */
+        struct {
+            const char *source_addr;
+            const char *ip;
+            int port;
+        } tcp;
+        /** use this field for unix domain sockets */
+        const char *unix_socket;
+        /**
+         * use this field to have hiredis operate an already-open
+         * file descriptor */
+        redisFD fd;
+    } endpoint;
+
+    /* Optional user defined data/destructor */
+    void *privdata;
+    void (*free_privdata)(void *);
+
+    /* A user defined PUSH message callback */
+    redisPushFn *push_cb;
+    redisAsyncPushFn *async_push_cb;
+} redisOptions;
+
+/**
+ * Helper macros to initialize options to their specified fields.
+ */
+#define REDIS_OPTIONS_SET_TCP(opts, ip_, port_) \
+    (opts)->type = REDIS_CONN_TCP; \
+    (opts)->endpoint.tcp.ip = ip_; \
+    (opts)->endpoint.tcp.port = port_;
+
+#define REDIS_OPTIONS_SET_UNIX(opts, path) \
+    (opts)->type = REDIS_CONN_UNIX;        \
+    (opts)->endpoint.unix_socket = path;
+
+#define REDIS_OPTIONS_SET_PRIVDATA(opts, data, dtor) \
+    (opts)->privdata = data;                         \
+    (opts)->free_privdata = dtor;                    \
+
+typedef struct redisContextFuncs {
+    void (*free_privctx)(void *);
+    void (*async_read)(struct redisAsyncContext *);
+    void (*async_write)(struct redisAsyncContext *);
+    ssize_t (*read)(struct redisContext *, char *, size_t);
+    ssize_t (*write)(struct redisContext *);
+} redisContextFuncs;
+
+/* Context for a connection to Redis */
+typedef struct redisContext {
+    const redisContextFuncs *funcs;   /* Function table */
+
+    int err; /* Error flags, 0 when there is no error */
+    char errstr[128]; /* String representation of error when applicable */
+    redisFD fd;
+    int flags;
+    char *obuf; /* Write buffer */
+    redisReader *reader; /* Protocol reader */
+
+    enum redisConnectionType connection_type;
+    struct timeval *connect_timeout;
+    struct timeval *command_timeout;
+
+    struct {
+        char *host;
+        char *source_addr;
+        int port;
+    } tcp;
+
+    struct {
+        char *path;
+    } unix_sock;
+
+    /* For non-blocking connect */
+    struct sockadr *saddr;
+    size_t addrlen;
+
+    /* Optional data and corresponding destructor users can use to provide
+     * context to a given redisContext.  Not used by hiredis. */
+    void *privdata;
+    void (*free_privdata)(void *);
+
+    /* Internal context pointer presently used by hiredis to manage
+     * SSL connections. */
+    void *privctx;
+
+    /* An optional RESP3 PUSH handler */
+    redisPushFn *push_cb;
+} redisContext;
+
+redisContext *redisConnectWithOptions(const redisOptions *options);
+redisContext *redisConnect(const char *ip, int port);
+redisContext *redisConnectWithTimeout(const char *ip, int port, const struct timeval tv);
+redisContext *redisConnectNonBlock(const char *ip, int port);
+redisContext *redisConnectBindNonBlock(const char *ip, int port,
+                                       const char *source_addr);
+redisContext *redisConnectBindNonBlockWithReuse(const char *ip, int port,
+                                                const char *source_addr);
+redisContext *redisConnectUnix(const char *path);
+redisContext *redisConnectUnixWithTimeout(const char *path, const struct timeval tv);
+redisContext *redisConnectUnixNonBlock(const char *path);
+redisContext *redisConnectFd(redisFD fd);
+
+/**
+ * Reconnect the given context using the saved information.
+ *
+ * This re-uses the exact same connect options as in the initial connection.
+ * host, ip (or path), timeout and bind address are reused,
+ * flags are used unmodified from the existing context.
+ *
+ * Returns REDIS_OK on successful connect or REDIS_ERR otherwise.
+ */
+int redisReconnect(redisContext *c);
+
+redisPushFn *redisSetPushCallback(redisContext *c, redisPushFn *fn);
+int redisSetTimeout(redisContext *c, const struct timeval tv);
+int redisEnableKeepAlive(redisContext *c);
+void redisFree(redisContext *c);
+redisFD redisFreeKeepFd(redisContext *c);
+int redisBufferRead(redisContext *c);
+int redisBufferWrite(redisContext *c, int *done);
+
+/* In a blocking context, this function first checks if there are unconsumed
+ * replies to return and returns one if so. Otherwise, it flushes the output
+ * buffer to the socket and reads until it has a reply. In a non-blocking
+ * context, it will return unconsumed replies until there are no more. */
+int redisGetReply(redisContext *c, void **reply);
+int redisGetReplyFromReader(redisContext *c, void **reply);
+
+/* Write a formatted command to the output buffer. Use these functions in blocking mode
+ * to get a pipeline of commands. */
+int redisAppendFormattedCommand(redisContext *c, const char *cmd, size_t len);
+
+/* Write a command to the output buffer. Use these functions in blocking mode
+ * to get a pipeline of commands. */
+int redisvAppendCommand(redisContext *c, const char *format, va_list ap);
+int redisAppendCommand(redisContext *c, const char *format, ...);
+int redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
+
+/* Issue a command to Redis. In a blocking context, it is identical to calling
+ * redisAppendCommand, followed by redisGetReply. The function will return
+ * NULL if there was an error in performing the request, otherwise it will
+ * return the reply. In a non-blocking context, it is identical to calling
+ * only redisAppendCommand and will always return NULL. */
+void *redisvCommand(redisContext *c, const char *format, va_list ap);
+void *redisCommand(redisContext *c, const char *format, ...);
+void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

data/ext/redis_client/hiredis/vendor/hiredis.pc.in

@@ -0,0 +1,12 @@
+prefix=@CMAKE_INSTALL_PREFIX@
+install_libdir=@CMAKE_INSTALL_LIBDIR@
+exec_prefix=${prefix}
+libdir=${exec_prefix}/${install_libdir}
+includedir=${prefix}/include
+pkgincludedir=${includedir}/hiredis
+
+Name: hiredis
+Description: Minimalistic C client library for Redis.
+Version: @PROJECT_VERSION@
+Libs: -L${libdir} -lhiredis
+Cflags: -I${pkgincludedir} -D_FILE_OFFSET_BITS=64

data/ext/redis_client/hiredis/vendor/hiredis_ssl-config.cmake.in

@@ -0,0 +1,13 @@
+@PACKAGE_INIT@
+
+set_and_check(hiredis_ssl_INCLUDEDIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
+
+IF (NOT TARGET hiredis::hiredis_ssl)
+	INCLUDE(${CMAKE_CURRENT_LIST_DIR}/hiredis_ssl-targets.cmake)
+ENDIF()
+
+SET(hiredis_ssl_LIBRARIES hiredis::hiredis_ssl)
+SET(hiredis_ssl_INCLUDE_DIRS ${hiredis_ssl_INCLUDEDIR})
+
+check_required_components(hiredis_ssl)
+

data/ext/redis_client/hiredis/vendor/hiredis_ssl.h

@@ -0,0 +1,157 @@
+
+/*
+ * Copyright (c) 2019, Redis Labs
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ *   * Redistributions of source code must retain the above copyright notice,
+ *     this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *   * Neither the name of Redis nor the names of its contributors may be used
+ *     to endorse or promote products derived from this software without
+ *     specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __HIREDIS_SSL_H
+#define __HIREDIS_SSL_H
+
+#include <openssl/ssl.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* This is the underlying struct for SSL in ssl.h, which is not included to
+ * keep build dependencies short here.
+ */
+struct ssl_st;
+
+/* A wrapper around OpenSSL SSL_CTX to allow easy SSL use without directly
+ * calling OpenSSL.
+ */
+typedef struct redisSSLContext redisSSLContext;
+
+/* The SSL connection context is attached to SSL/TLS connections as a privdata. */
+typedef struct redisSSL {
+    /**
+     * OpenSSL SSL object.
+     */
+    SSL *ssl;
+
+    /**
+     * SSL_write() requires to be called again with the same arguments it was
+     * previously called with in the event of an SSL_read/SSL_write situation
+     */
+    size_t lastLen;
+
+    /** Whether the SSL layer requires read (possibly before a write) */
+    int wantRead;
+
+    /**
+     * Whether a write was requested prior to a read. If set, the write()
+     * should resume whenever a read takes place, if possible
+     */
+    int pendingWrite;
+} redisSSL;
+
+/**
+ * Initialization errors that redisCreateSSLContext() may return.
+ */
+
+typedef enum {
+    REDIS_SSL_CTX_NONE = 0,                     /* No Error */
+    REDIS_SSL_CTX_CREATE_FAILED,                /* Failed to create OpenSSL SSL_CTX */
+    REDIS_SSL_CTX_CERT_KEY_REQUIRED,            /* Client cert and key must both be specified or skipped */
+    REDIS_SSL_CTX_CA_CERT_LOAD_FAILED,          /* Failed to load CA Certificate or CA Path */
+    REDIS_SSL_CTX_CLIENT_CERT_LOAD_FAILED,      /* Failed to load client certificate */
+    REDIS_SSL_CTX_PRIVATE_KEY_LOAD_FAILED       /* Failed to load private key */
+} redisSSLContextError;
+
+/**
+ * Return the error message corresponding with the specified error code.
+ */
+
+const char *redisSSLContextGetError(redisSSLContextError error);
+
+/**
+ * Helper function to initialize the OpenSSL library.
+ *
+ * OpenSSL requires one-time initialization before it can be used. Callers should
+ * call this function only once, and only if OpenSSL is not directly initialized
+ * elsewhere.
+ */
+int redisInitOpenSSL(void);
+
+/**
+ * Helper function to initialize an OpenSSL context that can be used
+ * to initiate SSL connections.
+ *
+ * cacert_filename is an optional name of a CA certificate/bundle file to load
+ * and use for validation.
+ *
+ * capath is an optional directory path where trusted CA certificate files are
+ * stored in an OpenSSL-compatible structure.
+ *
+ * cert_filename and private_key_filename are optional names of a client side
+ * certificate and private key files to use for authentication. They need to
+ * be both specified or omitted.
+ *
+ * server_name is an optional and will be used as a server name indication
+ * (SNI) TLS extension.
+ *
+ * If error is non-null, it will be populated in case the context creation fails
+ * (returning a NULL).
+ */
+
+redisSSLContext *redisCreateSSLContext(const char *cacert_filename, const char *capath,
+        const char *cert_filename, const char *private_key_filename,
+        const char *server_name, redisSSLContextError *error);
+
+/**
+ * Free a previously created OpenSSL context.
+ */
+void redisFreeSSLContext(redisSSLContext *redis_ssl_ctx);
+
+/**
+ * Initiate SSL on an existing redisContext.
+ *
+ * This is similar to redisInitiateSSL() but does not require the caller
+ * to directly interact with OpenSSL, and instead uses a redisSSLContext
+ * previously created using redisCreateSSLContext().
+ */
+
+int redisInitiateSSLWithContext(redisContext *c, redisSSLContext *redis_ssl_ctx);
+
+int redisInitiateSSLContinue(redisContext *c);
+
+/**
+ * Initiate SSL/TLS negotiation on a provided OpenSSL SSL object.
+ */
+
+int redisInitiateSSL(redisContext *c, struct ssl_st *ssl);
+
+
+redisSSL *redisGetSSLSocket(redisContext *c);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* __HIREDIS_SSL_H */

data/ext/redis_client/hiredis/vendor/hiredis_ssl.pc.in

@@ -0,0 +1,12 @@
+prefix=@CMAKE_INSTALL_PREFIX@
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+pkgincludedir=${includedir}/hiredis
+
+Name: hiredis_ssl
+Description: SSL Support for hiredis.
+Version: @PROJECT_VERSION@
+Requires: hiredis
+Libs: -L${libdir} -lhiredis_ssl
+Libs.private: -lssl -lcrypto