hare 1.0.1

data/.gitignore

@@ -0,0 +1,4 @@
+*.gem
+.bundle
+Gemfile.lock
+pkg/*

data/Gemfile

@@ -0,0 +1,4 @@
+source "http://rubygems.org"
+
+# Specify your gem's dependencies in hare.gemspec
+gemspec

data/LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2011 Brian L. Troutwine
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/README.md

@@ -0,0 +1,39 @@
+hare -- A command-line tool in Ruby to interact with message queues
+===================================================================
+
+Introduction
+------------
+
+Life with an AMQP message bus is dandy. `hare` exists to augment that
+experience, allowing cron scripts and other system utilies to fire and
+forget messages over the message bus or to receive messages to
+stdout. `hare` is to RabbitMQ as `mailx` is to postfix.
+
+Installation
+------------
+
+Assuming you have a Ruby environment available, it's as simple as:
+
+    gem install hare
+
+If not, consider the use of
+[rbenv](https://github.com/sstephenson/rbenv) or
+[rvm](http://beginrescueend.com/).
+
+Example Usage
+-------------
+
+We'll send a message over the localhost message bus, exchange 'events', vhost '/' with route-key 'dev.event'. First, get a `hare` into listener mode:
+
+    $ hare --exchange_name events --route_key dev.event
+
+and we'll send a message:
+
+    $ hare --exchange_name events --route_key dev.event --producer "that wasn't so bad"
+
+Miscellania
+-----------
+
+`hare` has been developed as a part of my work with
+[CarePilot](https://www.carepilot.com) and is released under the MIT
+license. `hare` uses [semantic versioning](http://semver.org/).

data/Rakefile

@@ -0,0 +1 @@
+require "bundler/gem_tasks"

data/bin/hare

@@ -0,0 +1,6 @@
+#!/usr/bin/env ruby
+# Hare command line interface script.
+# Run <tt>hare -h</tt> to get more usage.
+
+require 'hare'
+Hare::Runner.new(ARGV).run!

data/hare.gemspec

@@ -0,0 +1,23 @@
+# -*- encoding: utf-8 -*-
+$:.push File.expand_path("../lib", __FILE__)
+require "hare/version"
+
+Gem::Specification.new do |s|
+  s.name        = "hare"
+  s.version     = Hare::VERSION
+  s.authors     = ["Brian L. Troutwine"]
+  s.email       = ["brian@troutwine.us"]
+  s.homepage    = "https://github.com/blt/hare"
+  s.summary     = %q{A small command-line tool for publishing to and consuming from AMQP queues.}
+  s.description = %q{The one pain-point I have had with AMQP is the lack of a series of command line tools for smoke-testing components or sending my own messages through a queue. Hare can be toggled either to produce messages, or to sit and listen/report for them.}
+
+  s.rubyforge_project = "hare"
+
+  s.files         = `git ls-files`.split("\n")
+  s.test_files    = `git ls-files -- {test,spec,features}/*`.split("\n")
+  s.executables   = `git ls-files -- bin/*`.split("\n").map{ |f| File.basename(f) }
+  s.require_paths = ["lib"]
+
+  # specify any dependencies here; for example:
+  s.add_runtime_dependency "bunny", "~> 0.7.8"
+end

data/lib/hare/runner.rb

@@ -0,0 +1,121 @@
+require 'optparse'
+require 'bunny'
+
+module Hare
+  trap(:INT) { puts; exit }
+
+  class Runner
+    attr_accessor :options
+    attr_accessor :arguments
+
+    def initialize(argv)
+      @argv = argv
+
+      @options = {
+        :logging => false,
+        :publish => false,
+        :amqp => {
+          :host => 'localhost',
+          :port => '5672',
+          :exchange => {
+            :name => nil,
+            :kind => :direct,
+          },
+          :queue => '',
+          :vhost => '/',
+          :timeout => 0
+        }
+      }
+
+      parse!
+    end
+
+    def parser
+      @parser ||= OptionParser.new do |opts|
+        opts.banner = "Usage: hare [options] [MSG]"
+
+        opts.separator ""
+        opts.separator "Common Options:"
+        opts.on("-h", "--host HOST", "The AMQP server host") {
+          |host| @options[:amqp][:host] = host
+        }
+        opts.on("-p", "--port PORT", "The AMQP server host port") {
+          |port| @options[:amqp][:port] = port
+        }
+        opts.on("--vhost VHOST", "The AMQP vhost on which to connect") {
+          |vhost| @options[:amqp][:vhost] = vhost
+        }
+        opts.on("--exchange_name EXCHANGE", "The name of the AMQP exchange on which to connect") {
+          |exc| @options[:amqp][:exchange][:name] = exc
+        }
+        opts.on("--exchange_type TYPE", "The type of the AMQP exchange on which to connect") {
+          |exc| @options[:amqp][:exchange][:type] = exc
+        }
+        opts.on("--username NAME", "The AMQP username.") {
+          |u| @options[:amqp][:username] = u
+        }
+        opts.on("--password PSWD", "The AMQP password for the user given.") {
+          |p| @options[:amqp][:password] = p
+        }
+        opts.on("--route_key KEY", "The key to route messages over.") {
+          |k| @options[:amqp][:key] = k
+        }
+        opts.on("--logging", "Enable logging of AMQP interactions.") {
+          @options[:logging] = true
+        }
+
+        opts.separator ""
+        opts.separator "Consumer Options: "
+        opts.on("--queue QUEUE", "The queue on which to listen.") {
+          |q| @options[:amqp][:queue] = q
+        }
+        opts.on("--timeout TIME", "The time after which queue subscription will end.") {
+          |t| @options[:amqp][:timeout] = t
+        }
+
+        opts.separator ""
+        opts.separator "Producer Options: "
+        opts.on("--producer", "Toggle to enable producing messages") {
+          @options[:publish] = true
+        }
+
+        opts.separator ""
+        opts.on_tail("--help", "Show this message.") do
+          puts opts
+          exit
+        end
+        opts.on_tail("-v", "--version", "Show version") {
+          puts Hare::VERSION; exit
+        }
+      end
+    end
+
+    def parse!
+      parser.parse! @argv
+      @arguments = @argv
+    end
+
+    def run!
+      amqp = @options[:amqp]
+
+      b = Bunny.new(:host => amqp[:host], :port => amqp[:port], :logging => amqp[:logging])
+      b.start
+
+      eopts = amqp[:exchange]
+      exch = b.exchange(:name => eopts[:name], :type => eopts[:type])
+
+      if @options[:publish]
+        exch.publish(@arguments[0], :key => amqp[:key])
+      else
+        q = b.queue(amqp[:queue])
+        q.bind(exch, :key => amqp[:key])
+        q.subscribe(:timeout => amqp[:timeout]) do |msg|
+          puts "#{msg[:payload]}"
+        end
+      end
+
+      b.stop
+    end
+
+  end
+end

data/lib/hare/version.rb

@@ -0,0 +1,3 @@
+module Hare
+  VERSION = "1.0.1"
+end

data/lib/hare.rb

@@ -0,0 +1,7 @@
+module Hare
+  ROOT = File.expand_path(File.dirname(__FILE__))
+
+  autoload :Runner,             "#{ROOT}/hare/runner"
+end
+
+require "#{Hare::ROOT}/hare/version"

metadata

@@ -0,0 +1,70 @@
+--- !ruby/object:Gem::Specification
+name: hare
+version: !ruby/object:Gem::Version
+  version: 1.0.1
+  prerelease: 
+platform: ruby
+authors:
+- Brian L. Troutwine
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2011-11-11 00:00:00.000000000Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: bunny
+  requirement: &69633210 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: 0.7.8
+  type: :runtime
+  prerelease: false
+  version_requirements: *69633210
+description: The one pain-point I have had with AMQP is the lack of a series of command
+  line tools for smoke-testing components or sending my own messages through a queue.
+  Hare can be toggled either to produce messages, or to sit and listen/report for
+  them.
+email:
+- brian@troutwine.us
+executables:
+- hare
+extensions: []
+extra_rdoc_files: []
+files:
+- .gitignore
+- Gemfile
+- LICENSE
+- README.md
+- Rakefile
+- bin/hare
+- hare.gemspec
+- lib/hare.rb
+- lib/hare/runner.rb
+- lib/hare/version.rb
+homepage: https://github.com/blt/hare
+licenses: []
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: hare
+rubygems_version: 1.8.10
+signing_key: 
+specification_version: 3
+summary: A small command-line tool for publishing to and consuming from AMQP queues.
+test_files: []