hanko_xml 0.1.0-x64-mingw-ucrt

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA256:
+  metadata.gz: b68f0b8bc0036b66446e0b446868aac77a51a831b94a289b73269e195c5854a3
+  data.tar.gz: 7365f7d8fc3d9f6bf7d95940f9d688097472319f1be604462c16703c21abcc0c
+SHA512:
+  metadata.gz: 516d1c6461fd81c4cf0c285c68d1f43e733df9aa27cf6931ff7348c307fe08dd2b727baa7fb8b93891f58498d74cf6096f79e505ecab8574fd5d6189c9acf26c
+  data.tar.gz: 6c2da420c829d81e914c855e039cb4603889701f2f502ff264c4c654d269b29bb7e02ab54cbbae6a1dd7ce1b489e8990081c30b4e46143b6ac802a48301d0549

data/CHANGELOG.md

@@ -0,0 +1,44 @@
+# Changelog
+
+All notable changes to this project are documented here. The format follows
+[Keep a Changelog](https://keepachangelog.com/en/1.1.0/), and the gem version
+follows [Semantic Versioning](https://semver.org/spec/v2.0.0.html) **over the
+Ruby API only** — the libxmlsec1 version the extension is built against is
+tracked separately, and is reported by `HankoXml::NativeVersion.build_versions`.
+
+## [Unreleased]
+
+## [0.1.0] - 2026-10-15
+
+First release.
+
+- **XML-DSig signing and verification** of enveloped, enveloping and detached
+  signatures, through libxmlsec1: canonicalization, digests, signature math and
+  reference resolution all happen in xmlsec, never in Ruby.
+- **Secure by default.** `Policy.strict` denies SHA-1, HMAC, XSLT, XPath and
+  external references, requires 2048-bit RSA and DSA and 256-bit EC keys, and
+  checks the signing certificate's key usage. Opt-in presets cover other needs:
+  `Policy.fragment` (SAML-style signed fragments), `Policy.legacy_sha1`,
+  `Policy.xades` (RSA-PSS, SHA-3, ECDSA-SHA3) and `Policy.interop` for older
+  signatures.
+- **The caller chooses the key.** Verification uses the certificate, key or
+  `OpenSSL::X509::Store` you pass, never one selected by the document's
+  `<KeyInfo>`, and `Verification` reports which references were signed, so
+  XML Signature Wrapping is caught.
+- **XAdES-B** signing (`Xades::Signer`) and verification (`Xades::Verifier`),
+  including XAdES 1.2.2 and 1.1.1 signed properties, tested against SignXML
+  and the EU DSS corpus.
+- **Works without Nokogiri.** Signing and verification run on Strings, files
+  and IOs. With Nokogiri, the documents you already hold can be signed in
+  place, and `require "hanko_xml/nokogiri_ext"` adds `doc.sign!` and
+  `doc.signature_valid?`.
+- **Detailed results.** `Verification` exposes the certificate chain,
+  `SignedInfo`, `KeyInfo` and per-reference status, with
+  `Verifier.without_trust_verification` for integrity-only checks.
+- **External references** are served only from `referenced_documents:`: the
+  library never reads files or opens network connections.
+- **Precompiled gems** for `x86_64-linux`, `aarch64-linux`, `arm64-darwin` and
+  `x64-mingw-ucrt`, with libxml2 2.15.4, xmlsec1 1.3.12 and OpenSSL 3.5.9
+  statically linked and isolated from Nokogiri's libxml2. Other platforms build
+  the source gem against the system libraries (libxmlsec1 `>= 1.2.30, < 1.4`).
+- **Ruby 3.1 to 3.4**, with RBS signatures in `sig/`.

data/LICENSE.txt

@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2026 Danimar Ribeiro
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

data/README.md

@@ -0,0 +1,222 @@
+<p align="center">
+  <img src="assets/hanko-mark.png" alt="HankoXml" width="120" height="120">
+</p>
+
+<h1 align="center">HankoXml</h1>
+
+<p align="center">
+  A high-performance, strictly secure XML Digital Signature (XML-DSig) library for Ruby.
+</p>
+
+---
+
+HankoXml is backed by a native Rust extension that binds directly to [libxmlsec1](https://www.aleksey.com/xmlsec/) using [Magnus](https://github.com/matsadler/magnus). It is designed to be completely byte-faithful, blazingly fast, and natively immune to XML Signature Wrapping (XSW) attacks.
+
+It works nicely with Nokogiri, signing and verifying the documents you already hold without fragile re-serialization, and it works without Nokogiri too: verification runs on plain bytes.
+
+## Features
+- **Full XML-DSig Support:** Sign and verify Enveloped, Enveloping, and Detached signatures.
+- **Nokogiri Native, Nokogiri Optional:** Signs and verifies the Nokogiri documents you already hold, with opt-in `doc.sign!` / `doc.signature_valid?` shorthands (`require "hanko_xml/nokogiri_ext"`), and verifies Strings, files and IOs without Nokogiri.
+- **XSW Defense:** Provides a robust `Policy` engine and structural `signed?(node)` checks to defeat XML Signature Wrapping (XSW) attacks.
+- **Rust-Backed:** Memory-safe FFI boundaries, zero shell-outs to CLI binaries, and massive performance gains over pure-Ruby cryptography.
+
+A feature and security comparison with Python [SignXML](https://pypi.org/project/signxml/), including a plan to close the remaining gaps (XAdES first), lives in [`docs/src/content/guide/comparison-signxml.md`](docs/src/content/guide/comparison-signxml.md).
+
+## Requirements
+
+Most users install a precompiled platform gem and do **not** need a local build
+toolchain.
+
+- Ruby 3.1+
+
+Precompiled gems are published for:
+
+- `x86_64-linux`
+- `aarch64-linux`
+- `arm64-darwin`
+- `x64-mingw-ucrt`
+
+### Building from source (fallback)
+
+If RubyGems falls back to the source gem for your platform, HankoXml compiles
+its Rust extension against the local `libxmlsec1`, so the build toolchain has
+to be present:
+
+- Rust toolchain (stable)
+- `libxmlsec1` and `libxml2` development headers, `pkg-config`, and libclang
+  (bindgen generates the FFI bindings during the build):
+  - **macOS:** `brew install libxmlsec1 libxml2 pkg-config`
+  - **Debian/Ubuntu:** `apt install libxmlsec1-dev libxml2-dev pkg-config libclang-dev`
+
+Supported libxmlsec1: `>= 1.2.30, < 1.4`.
+
+*(Note for macOS: Homebrew's `libxml2` is keg-only. HankoXml's `build.rs` automatically works around this by resolving absolute library paths during compilation.)*
+
+### Version safety
+
+bindgen bakes xmlsec's and libxml2's struct layouts into the compiled
+extension, and a later mismatch is invisible to the dynamic linker — every
+symbol still resolves, and a field is then read at the wrong offset. HankoXml
+checks for this when it loads and raises `HankoXml::NativeVersionMismatch`
+rather than returning a wrong answer from `verify!`:
+
+```ruby
+HankoXml::NativeVersion.build_versions
+# => { xmlsec: "1.3.12", libxml2: "2.15.3", crypto: "openssl" }
+```
+
+If you installed from source and later upgrade libxmlsec1 through your OS
+package manager, rebuild the extension with `gem pristine hanko_xml`.
+
+## Installation
+
+Add this line to your application's Gemfile:
+
+```ruby
+gem "hanko_xml"
+```
+
+Nokogiri is optional, and `hanko_xml` does not depend on it or load it. Pick
+the setup that fits:
+
+- **With Nokogiri** (most projects already have it): add `gem "nokogiri"` and
+  `require "nokogiri"`. Everything is available, including signing, the
+  Nokogiri API below, and node-level `signed?` checks.
+- **Bytes only**: leave Nokogiri out. Verification works on a String, a path
+  or an IO, with the same policy, schema and structural checks. Signing works
+  when the document already holds the `<Signature>` template. Building one, and
+  the DOM features, raise `HankoXml::NokogiriRequired`, naming what needs
+  Nokogiri.
+
+| Capability | With Nokogiri | Bytes only |
+|---|---|---|
+| `valid?`, `verify!`, `Verifier`, `signature_present?` | yes | yes |
+| `sign` into a template the document already holds | yes | yes, one template per call |
+| `sign` that builds the template, `sign!`, `Signer#template` | yes | raises `NokogiriRequired` |
+| `Verification#signed?`, `#at_signed`, `#signed_nodes` | yes | raises; `#covers_root?` still answers |
+| Custom `Nokogiri::XML::Schema`, `signature:` XPath, `resolver:`, XAdES | yes | raises `NokogiriRequired` |
+
+`HankoXml.capabilities` reports the same thing at runtime. On Linux with
+system libraries, whichever of hanko_xml and Nokogiri loads first decides which
+libxml2 the other runs on, so HankoXml leaves the load order to you.
+
+## Usage
+
+### 1. The Nokogiri API (Recommended)
+
+HankoXml can extend Nokogiri directly, making signing and verifying incredibly
+ergonomic. The extension is opt-in: `require "hanko_xml"` alone does not touch
+Nokogiri's classes, and `require "hanko_xml/nokogiri_ext"` adds `#sign`,
+`#sign!`, `#signature_valid?`, `#signatures` and `#signature_present?` to
+`Nokogiri::XML::Document` and `Node`.
+
+```ruby
+require "nokogiri"
+require "hanko_xml"
+require "hanko_xml/nokogiri_ext"
+
+doc = Nokogiri::XML(File.read("document.xml"))
+private_key = File.read("private.pem")
+certificate = File.read("public.crt")
+
+# Sign the document in place
+doc.sign!(key: private_key, certificate: certificate)
+
+# Safely serialize without destroying the signature bytes
+File.write("signed.xml", doc.to_xml(save_with: Nokogiri::XML::Node::SaveOptions::AS_XML))
+
+# Verify it later
+signed_doc = Nokogiri::XML(File.read("signed.xml"))
+if signed_doc.signature_valid?(certificate: certificate)
+  puts "Signature is valid!"
+end
+```
+
+### 2. The Module API
+
+If you prefer not to load the Nokogiri extension, use the top-level module:
+
+#### Verification
+
+This works with or without Nokogiri:
+
+```ruby
+require "hanko_xml"
+require "pathname"
+
+xml = File.read("signed.xml")
+
+# Raises HankoXml::VerificationError if the signature is invalid or tampered with
+result = HankoXml.verify!(xml, certificate: Pathname("public.crt"))
+
+puts result.valid? # => true
+```
+
+#### Signing (Immutable)
+```ruby
+# Returns a safe `SignedDocument` wrapper without mutating the original
+# A String is PEM content, not a filename: pass files as Pathname (or File.read them).
+signed_doc = HankoXml.sign(xml, key: Pathname("private.pem"), certificate: Pathname("public.crt"))
+
+puts signed_doc.to_s
+```
+
+### Defending against XML Signature Wrapping (XSW)
+
+A signature is only secure if it actually signed the data you are looking at. Attackers often wrap or move the `<Signature>` block to trick naive verifiers. HankoXml provides a structural `signed?` check on the verification result to prove a specific node was cryptographically covered by the digest.
+
+```ruby
+result = HankoXml.verify!(doc, certificate: cert)
+
+# Find the critical data in your document
+payload = doc.at_xpath("//Invoice")
+
+# Ensure the attacker didn't move it outside the signed block
+unless result.signed?(payload)
+  raise "XSW Attack Detected: The invoice was tampered with!"
+end
+```
+
+### Trust Anchors & Verification Options
+
+You can verify signatures against multiple certificates, strict schemas, or specific validation times.
+
+```ruby
+HankoXml.verify!(
+  doc,
+  # Pass a single cert, an array of certs, an OpenSSL::X509::Store, or a mapping of <KeyName>s
+  store: my_trusted_ca_store,
+  
+  # Ensure the certificate was valid at a specific time
+  verification_time: Time.parse("2023-01-01"),
+  
+  # Pre-validate the <Signature> structure against the W3C XSD to prevent parser exploits
+  schema: :default,
+  
+  # Enforce strict security policies (no SHA-1, no external references)
+  policy: HankoXml::Policy.strict
+)
+```
+
+## Contributing
+
+Bug reports and pull requests are welcome on GitHub at https://github.com/danimaribeiro/HankoXml.
+
+`bundle exec rake compile spec` by default builds the Rust extension against
+your system's `libxmlsec1` (see "Building from source" above), which is fine
+for day-to-day development. But the system library's build configuration can
+differ from the pinned, vendored `libxmlsec1` that CI and the released gem
+actually use — on macOS with Homebrew's `libxmlsec1`, this has been observed
+to make some native URI-restriction and `KeyValue` specs fail or hang. Before
+relying on a full local `bundle exec rspec` run (e.g. to validate a security
+fix), rebuild against the vendored library instead:
+
+```sh
+HANKO_XML_VENDOR=1 bundle exec rake compile spec
+```
+
+See [VENDORING.md](VENDORING.md) for details on what gets vendored and why.
+
+## License
+
+The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT).