haml 3.0.21 → 3.0.22

data/vendor/sass/CONTRIBUTING

@@ -1,3 +0,0 @@
-Contributions are welcomed. Please see the following sites for guidelines:
-
-  http://sass-lang.com/development.html#contributing

data/vendor/sass/MIT-LICENSE

@@ -1,20 +0,0 @@
-Copyright (c) 2006-2009 Hampton Catlin, Nathan Weizenbaum, and Chris Eppstein
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/sass/README.md

@@ -1,201 +0,0 @@
-# Sass
-
-**Sass makes CSS fun again**. Sass is an extension of CSS3,
-adding nested rules, variables, mixins, selector inheritance, and more.
-It's translated to well-formatted, standard CSS
-using the command line tool or a web-framework plugin.
-
-Sass has two syntaxes. The new main syntax (as of Sass 3)
-is known as "SCSS" (for "Sassy CSS"),
-and is a superset of CSS3's syntax.
-This means that every valid CSS3 stylesheet is valid SCSS as well.
-SCSS files use the extension `.scss`.
-
-The second, older syntax is known as the indented syntax (or just "Sass").
-Inspired by Haml's terseness, it's intended for people
-who prefer conciseness over similarity to CSS.
-Instead of brackets and semicolons,
-it uses the indentation of lines to specify blocks.
-Although no longer the primary syntax,
-the indented syntax will continue to be supported.
-Files in the indented syntax use the extension `.sass`.
-
-## Using
-
-Sass can be used from the command line
-or as part of a web framework.
-The first step is to install the gem:
-
-    gem install sass
-
-After you convert some CSS to Sass, you can run
-
-    sass style.scss
-
-to compile it back to CSS.
-For more information on these commands, check out
-
-    sass --help
-
-To install Sass in Rails 2,
-just add `config.gem "sass"` to `config/environment.rb`.
-In Rails 3, add `gem "sass"` to your Gemfile instead.
-`.sass` or `.scss` files should be placed in `public/stylesheets/sass`,
-where they'll be automatically compiled
-to corresponding CSS files in `public/stylesheets` when needed
-(the Sass template directory is customizable...
-see [the Sass reference](http://sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#template_location-option) for details).
-
-Sass can also be used with any Rack-enabled web framework.
-To do so, just add
-
-    require 'sass/plugin/rack'
-    use Sass::Plugin::Rack
-
-to `config.ru`.
-Then any Sass files in `public/stylesheets/sass`
-will be compiled CSS files in `public/stylesheets` on every request.
-
-To use Sass programatically,
-check out the [YARD documentation](http://sass-lang.com/docs/yardoc/).
-
-## Formatting
-
-Sass is an extension of CSS
-that adds power and elegance to the basic language.
-It allows you to use [variables][vars], [nested rules][nested],
-[mixins][mixins], [inline imports][imports],
-and more, all with a fully CSS-compatible syntax.
-Sass helps keep large stylesheets well-organized,
-and get small stylesheets up and running quickly,
-particularly with the help of
-[the Compass style library](http://compass-style.org).
-
-[vars]:    http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#variables_
-[nested]:  http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#nested_rules_
-[mixins]:  http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#mixins
-[imports]: http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#import
-
-Sass has two syntaxes.
-The one presented here, known as "SCSS" (for "Sassy CSS"),
-is fully CSS-compatible.
-The other (older) syntax, known as the indented syntax or just "Sass",
-is whitespace-sensitive and indentation-based.
-For more information, see the [reference documentation][syntax].
-
-[syntax]: http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#syntax
-
-To run the following examples and see the CSS they produce,
-put them in a file called `test.scss` and run `sass test.scss`.
-
-### Nesting
-
-Sass avoids repetition by nesting selectors within one another.
-The same thing works for properties.
-
-    table.hl {
-      margin: 2em 0;
-      td.ln { text-align: right; }
-    }
-
-    li {
-      font: {
-        family: serif;
-        weight: bold;
-        size: 1.2em;
-      }
-    }
-
-### Variables
-
-Use the same color all over the place?
-Need to do some math with height and width and text size?
-Sass supports variables, math operations, and many useful functions.
-
-    $blue: #3bbfce;
-    $margin: 16px;
-
-    .content_navigation {
-      border-color: $blue;
-      color: darken($blue, 10%);
-    }
-
-    .border {
-      padding: $margin / 2;
-      margin: $margin / 2;
-      border-color: $blue;
-    }
-
-### Mixins
-
-Even more powerful than variables,
-mixins allow you to re-use whole chunks of CSS,
-properties or selectors.
-You can even give them arguments. 
-
-    @mixin table-scaffolding {
-      th {
-        text-align: center;
-        font-weight: bold;
-      }
-      td, th { padding: 2px; }
-    }
-
-    @mixin left($dist) {
-      float: left;
-      margin-left: $dist;
-    }
-
-    #data {
-      @include left(10px);
-      @include table-scaffolding;
-    }
-
-A comprehensive list of features is available
-in the [Sass reference](http://beta.sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html).
-
-## Executables
-
-The Sass gem includes several executables that are useful
-for dealing with Sass from the command line.
-
-### `sass`
-
-The `sass` executable transforms a source Sass file into CSS.
-See `sass --help` for further information and options.
-
-### `sass-convert`
-
-The `sass-convert` executable converts between CSS, Sass, and SCSS.
-When converting from CSS to Sass or SCSS,
-nesting is applied where appropriate.
-See `sass-convert --help` for further information and options.
-
-## Authors
-
-Sass was envisioned by [Hampton Catlin](http://hamptoncatlin.com) (hcatlin).
-However, Hampton doesn't even know his way around the code anymore and now
-occasionally consults on the language issues. Hampton lives in Jacksonville,
-Florida and is the lead mobile developer for Wikimedia.
-
-[Nathan Weizenbaum](http://nex-3.com) is the primary developer and architect of
-Sass. His hard work has kept the project alive by endlessly answering forum
-posts, fixing bugs, refactoring, finding speed improvements, writing
-documentation, implementing new features, and getting Hampton coffee (a fitting
-task for a boy-genius). Nathan lives in Seattle, Washington and while not being
-a student at the University of Washington or working at an internship, he
-consults for Unspace Interactive.
-
-[Chris Eppstein](http://acts-as-architect.blogspot.com) is a core contributor to
-Sass and the creator of Compass, the first Sass-based framework. Chris focuses
-on making Sass more powerful, easy to use, and on ways to speed its adoption
-through the web development community. Chris lives in San Jose, California with
-his wife and daughter. He is the Software Architect for
-[Caring.com](http://caring.com), a website devoted to the 34 Million caregivers
-whose parents are sick or elderly, that uses Haml and Sass.
-
-If you use this software, you must pay Hampton a compliment. And
-buy Nathan some jelly beans. Maybe pet a kitten. Yeah. Pet that kitty.
-
-Beyond that, the implementation is licensed under the MIT License.
-Okay, fine, I guess that means compliments aren't __required__.

data/vendor/sass/Rakefile

@@ -1,363 +0,0 @@
-# ----- Utility Functions -----
-
-def scope(path)
-  File.join(File.dirname(__FILE__), path)
-end
-
-# ----- Default: Testing ------
-
-task :default => :test
-
-require 'rake/testtask'
-
-Rake::TestTask.new do |t|
-  t.libs << 'lib'
-  test_files = FileList[scope('test/**/*_test.rb')]
-  test_files.exclude(scope('test/rails/*'))
-  test_files.exclude(scope('test/plugins/*'))
-  t.test_files = test_files
-  t.verbose = true
-end
-
-# ----- Packaging -----
-
-# Don't use Rake::GemPackageTast because we want prerequisites to run
-# before we load the gemspec.
-desc "Build all the packages."
-task :package => [:permissions, :revision_file, :submodules] do
-  load scope('sass.gemspec')
-  Gem::Builder.new(SASS_GEMSPEC).build
-  pkg = "#{SASS_GEMSPEC.name}-#{SASS_GEMSPEC.version}"
-  mkdir_p "pkg"
-  verbose(true) {mv "#{pkg}.gem", "pkg/#{pkg}.gem"}
-
-  sh %{rm -f pkg/#{pkg}.tar.gz}
-  verbose(false) {SASS_GEMSPEC.files.each {|f| sh %{tar rf pkg/#{pkg}.tar #{f}}}}
-  sh %{gzip pkg/#{pkg}.tar}
-end
-
-task :permissions do
-  sh %{chmod -R a+rx bin}
-  sh %{chmod -R a+r .}
-  require 'shellwords'
-  Dir.glob('test/**/*_test.rb') do |file|
-    next if file =~ %r{^test/haml/spec/}
-    sh %{chmod a+rx #{file}}
-  end
-end
-
-task :revision_file do
-  require 'lib/sass'
-
-  release = Rake.application.top_level_tasks.include?('release') || File.exist?(scope('EDGE_GEM_VERSION'))
-  if Sass.version[:rev] && !release
-    File.open(scope('REVISION'), 'w') { |f| f.puts Sass.version[:rev] }
-  elsif release
-    File.open(scope('REVISION'), 'w') { |f| f.puts "(release)" }
-  else
-    File.open(scope('REVISION'), 'w') { |f| f.puts "(unknown)" }
-  end
-end
-
-# We also need to get rid of this file after packaging.
-at_exit { File.delete(scope('REVISION')) rescue nil }
-
-desc "Install Sass as a gem. Use SUDO=1 to install with sudo."
-task :install => [:package] do
-  gem  = RUBY_PLATFORM =~ /java/  ? 'jgem' : 'gem' 
-  sh %{#{'sudo ' if ENV["SUDO"]}#{gem} install --no-ri pkg/sass-#{File.read(scope('VERSION')).strip}}
-end
-
-desc "Release a new Sass package to Rubyforge."
-task :release => [:check_release, :package] do
-  name = File.read(scope("VERSION_NAME")).strip
-  version = File.read(scope("VERSION")).strip
-  sh %{rubyforge add_release sass sass "#{name} (v#{version})" pkg/sass-#{version}.gem}
-  sh %{rubyforge add_file    sass sass "#{name} (v#{version})" pkg/sass-#{version}.tar.gz}
-  sh %{gem push pkg/sass-#{version}.gem}
-end
-
-# Ensures that the VERSION file has been updated for a new release.
-task :check_release do
-  version = File.read(scope("VERSION")).strip
-  raise "There have been changes since current version (#{version})" if changed_since?(version)
-  raise "VERSION_NAME must not be 'Bleeding Edge'" if File.read(scope("VERSION_NAME")) == "Bleeding Edge"
-end
-
-# Reads a password from the command line.
-#
-# @param name [String] The prompt to use to read the password
-def read_password(prompt)
-  require 'readline'
-  system "stty -echo"
-  Readline.readline("#{prompt}: ").strip
-ensure
-  system "stty echo"
-  puts
-end
-
-# Returns whether or not the repository, or specific files,
-# has/have changed since a given revision.
-#
-# @param rev [String] The revision to check against
-# @param files [Array<String>] The files to check.
-#   If this is empty, checks the entire repository
-def changed_since?(rev, *files)
-  IO.popen("git diff --exit-code #{rev} #{files.join(' ')}") {}
-  return !$?.success?
-end
-
-task :submodules do
-  if File.exist?(File.dirname(__FILE__) + "/.git")
-    sh %{git submodule sync}
-    sh %{git submodule update --init}
-  elsif !File.exist?(File.dirname(__FILE__) + "/vendor/fssm/lib")
-    warn <<WARN
-WARNING: vendor/fssm doesn't exist, and this isn't a git repository so
-I can't get it automatically!
-WARN
-  end
-end
-
-task :release_edge do
-  ensure_git_cleanup do
-    puts "#{'=' * 50} Running rake release_edge"
-
-    sh %{git checkout edge-gem}
-    sh %{git reset --hard origin/edge-gem}
-    sh %{git merge origin/master}
-
-    unless edge_version = bump_edge_version
-      puts "master is already a prerelease version, no use building an edge gem"
-      next
-    end
-
-    File.open(scope('EDGE_GEM_VERSION'), 'w') {|f| f.puts(edge_version)}
-    sh %{git commit -m "Bump edge gem version to #{edge_version}." EDGE_GEM_VERSION}
-    sh %{git push origin edge-gem}
-
-    # Package the edge gem with the proper version
-    File.open(scope('VERSION'), 'w') {|f| f.puts(edge_version)}
-    sh %{rake package}
-    sh %{git checkout VERSION}
-
-    sh %{rubyforge add_release sass sass "Bleeding Edge (v#{edge_version})" pkg/sass-#{edge_version}.gem}
-    sh %{gem push pkg/sass-#{edge_version}.gem}
-  end
-end
-
-# Reads the master version and the edge gem version,
-# bump the latter, and return it.
-#
-# Returns nil if the current master version is already a non-alpha prerelease.
-def bump_edge_version
-  # Get the current master branch version
-  version = File.read(scope('VERSION')).strip.split('.')
-  version.map! {|n| n =~ /^[0-9]+$/ ? n.to_i : n}
-  unless version.size == 5 # prerelease
-    raise "master version #{version.join('.')} is not a prerelease version" 
-  end
-
-  # Bump the edge gem version
-  edge_version = File.read(scope('EDGE_GEM_VERSION')).strip.split('.')
-  edge_version.map! {|n| n =~ /^[0-9]+$/ ? n.to_i : n}
-
-  if version[3] != "alpha"
-    return
-  elsif edge_version[0..2] != version[0..2]
-    # A new master branch version was released, reset the edge gem version
-    edge_version[0..2] = version[0..2]
-    edge_version[4] = 1
-  else
-    # Just bump the teeny version
-    edge_version[4] += 1
-  end
-
-  edge_version.join('.')
-end
-
-task :watch_for_update do
-  sh %{ruby extra/update_watch.rb}
-end
-
-# ----- Documentation -----
-
-task :rdoc do
-  puts '=' * 100, <<END, '=' * 100
-Sass uses the YARD documentation system (http://github.com/lsegal/yard).
-Install the yard gem and then run "rake doc".
-END
-end
-
-begin
-  require 'yard'
-
-  namespace :doc do
-    task :sass do
-      require scope('lib/sass')
-      Dir[scope("yard/default/**/*.sass")].each do |sass|
-        File.open(sass.gsub(/sass$/, 'css'), 'w') do |f|
-          f.write(Sass::Engine.new(File.read(sass)).render)
-        end
-      end
-    end
-
-    desc "List all undocumented methods and classes."
-    task :undocumented do
-      opts = ENV["YARD_OPTS"] || ""
-      ENV["YARD_OPTS"] = opts.dup + <<OPTS
- --list --query "
-  object.docstring.blank? &&
-  !(object.type == :method && object.is_alias?)"
-OPTS
-      Rake::Task['yard'].execute
-    end
-  end
-
-  YARD::Rake::YardocTask.new do |t|
-    t.files = FileList.new(scope('lib/**/*.rb')) do |list|
-      list.exclude('lib/sass/plugin/merb.rb')
-      list.exclude('lib/sass/plugin/rails.rb')
-      list.exclude('lib/sass/less.rb')
-    end.to_a
-    t.options << '--incremental' if Rake.application.top_level_tasks.include?('redoc')
-    t.options += FileList.new(scope('yard/*.rb')).to_a.map {|f| ['-e', f]}.flatten
-    files = FileList.new(scope('doc-src/*')).to_a.sort_by {|s| s.size} + %w[MIT-LICENSE VERSION]
-    t.options << '--files' << files.join(',')
-    t.options << '--template-path' << scope('yard')
-    t.options << '--title' << ENV["YARD_TITLE"] if ENV["YARD_TITLE"]
-
-    t.before = lambda do
-      if ENV["YARD_OPTS"]
-        require 'shellwords'
-        t.options.concat(Shellwords.shellwords(ENV["YARD_OPTS"]))
-      end
-    end
-  end
-  Rake::Task['yard'].prerequisites.insert(0, 'doc:sass')
-  Rake::Task['yard'].instance_variable_set('@comment', nil)
-
-  desc "Generate Documentation"
-  task :doc => :yard
-  task :redoc => :yard
-rescue LoadError
-  desc "Generate Documentation"
-  task :doc => :rdoc
-  task :yard => :rdoc
-end
-
-task :pages do
-  ensure_git_cleanup do
-    puts "#{'=' * 50} Running rake pages"
-    sh %{git checkout sass-pages}
-    sh %{git reset --hard origin/sass-pages}
-
-    Dir.chdir("/var/www/sass-pages") do
-      sh %{git fetch origin}
-
-      sh %{git checkout stable}
-      sh %{git reset --hard origin/stable}
-
-      sh %{git checkout sass-pages}
-      sh %{git reset --hard origin/sass-pages}
-      sh %{rake build --trace}
-      sh %{mkdir -p tmp}
-      sh %{touch tmp/restart.txt}
-    end
-  end
-end
-
-# ----- Coverage -----
-
-begin
-  require 'rcov/rcovtask'
-
-  Rcov::RcovTask.new do |t|
-    t.test_files = FileList[scope('test/**/*_test.rb')]
-    t.rcov_opts << '-x' << '"^\/"'
-    if ENV['NON_NATIVE']
-      t.rcov_opts << "--no-rcovrt"
-    end
-    t.verbose = true
-  end
-rescue LoadError; end
-
-# ----- Profiling -----
-
-begin
-  require 'ruby-prof'
-
-  desc <<END
-Run a profile of sass.
-  TIMES=n sets the number of runs. Defaults to 1000.
-  FILE=str sets the file to profile. Defaults to 'complex'.
-  OUTPUT=str sets the ruby-prof output format.
-    Can be Flat, CallInfo, or Graph. Defaults to Flat. Defaults to Flat.
-END
-  task :profile do
-    times  = (ENV['TIMES'] || '1000').to_i
-    file   = ENV['FILE']
-
-    require 'lib/sass'
-
-    file = File.read(scope("test/sass/templates/#{file || 'complex'}.sass"))
-    result = RubyProf.profile { times.times { Sass::Engine.new(file).render } }
-
-    RubyProf.const_get("#{(ENV['OUTPUT'] || 'Flat').capitalize}Printer").new(result).print 
-  end
-rescue LoadError; end
-
-# ----- Handling Updates -----
-
-def email_on_error
-  yield
-rescue Exception => e
-  IO.popen("sendmail nex342@gmail.com", "w") do |sm|
-    sm << "From: nex3@nex-3.com\n" <<
-      "To: nex342@gmail.com\n" <<
-      "Subject: Exception when running rake #{Rake.application.top_level_tasks.join(', ')}\n" <<
-      e.message << "\n\n" <<
-      e.backtrace.join("\n")
-  end
-ensure
-  raise e if e
-end
-
-def ensure_git_cleanup
-  email_on_error {yield}
-ensure
-  sh %{git reset --hard HEAD}
-  sh %{git clean -xdf}
-  sh %{git checkout master}
-end
-
-task :handle_update do
-  email_on_error do
-    unless ENV["REF"] =~ %r{^refs/heads/(master|stable|sass-pages)$}
-      puts "#{'=' * 20} Ignoring rake handle_update REF=#{ENV["REF"].inspect}"
-      next
-    end
-    branch = $1
-
-    puts
-    puts
-    puts '=' * 150
-    puts "Running rake handle_update REF=#{ENV["REF"].inspect}"
-
-    sh %{git fetch origin}
-    sh %{git checkout stable}
-    sh %{git reset --hard origin/stable}
-    sh %{git checkout master}
-    sh %{git reset --hard origin/master}
-
-    case branch
-    when "master"
-      sh %{rake release_edge --trace}
-    when "stable", "sass-pages"
-      sh %{rake pages --trace}
-    end
-
-    puts 'Done running handle_update'
-    puts '=' * 150
-  end
-end