guara 0.0.1.rc

data/spec/controllers/system_task_status_spec.disabled

@@ -0,0 +1,11 @@
+require 'spec_helper'
+
+describe "SystemTaskStatus" do
+  describe "GET /system_task_status" do
+    it "works! (now write some real specs)" do
+      # Run the generator again with the --webrat flag if you want to use webrat methods/matchers
+      get system_task_status_path
+      response.status.should be(200)
+    end
+  end
+end

data/spec/controllers/task_types_controller_spec.disabled

@@ -0,0 +1,164 @@
+require 'spec_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+
+describe TaskTypesController do
+
+  # This should return the minimal set of attributes required to create a valid
+  # TaskType. As you add validations to TaskType, be sure to
+  # update the return value of this method accordingly.
+  def valid_attributes
+    {}
+  end
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # TaskTypesController. Be sure to keep this updated too.
+  def valid_session
+    {}
+  end
+
+  describe "GET index" do
+    it "assigns all task_types as @task_types" do
+      task_type = TaskType.create! valid_attributes
+      get :index, {}, valid_session
+      assigns(:task_types).should eq([task_type])
+    end
+  end
+
+  describe "GET show" do
+    it "assigns the requested task_type as @task_type" do
+      task_type = TaskType.create! valid_attributes
+      get :show, {:id => task_type.to_param}, valid_session
+      assigns(:task_type).should eq(task_type)
+    end
+  end
+
+  describe "GET new" do
+    it "assigns a new task_type as @task_type" do
+      get :new, {}, valid_session
+      assigns(:task_type).should be_a_new(TaskType)
+    end
+  end
+
+  describe "GET edit" do
+    it "assigns the requested task_type as @task_type" do
+      task_type = TaskType.create! valid_attributes
+      get :edit, {:id => task_type.to_param}, valid_session
+      assigns(:task_type).should eq(task_type)
+    end
+  end
+
+  describe "POST create" do
+    describe "with valid params" do
+      it "creates a new TaskType" do
+        expect {
+          post :create, {:task_type => valid_attributes}, valid_session
+        }.to change(TaskType, :count).by(1)
+      end
+
+      it "assigns a newly created task_type as @task_type" do
+        post :create, {:task_type => valid_attributes}, valid_session
+        assigns(:task_type).should be_a(TaskType)
+        assigns(:task_type).should be_persisted
+      end
+
+      it "redirects to the created task_type" do
+        post :create, {:task_type => valid_attributes}, valid_session
+        response.should redirect_to(TaskType.last)
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns a newly created but unsaved task_type as @task_type" do
+        # Trigger the behavior that occurs when invalid params are submitted
+        TaskType.any_instance.stub(:save).and_return(false)
+        post :create, {:task_type => {}}, valid_session
+        assigns(:task_type).should be_a_new(TaskType)
+      end
+
+      it "re-renders the 'new' template" do
+        # Trigger the behavior that occurs when invalid params are submitted
+        TaskType.any_instance.stub(:save).and_return(false)
+        post :create, {:task_type => {}}, valid_session
+        response.should render_template("new")
+      end
+    end
+  end
+
+  describe "PUT update" do
+    describe "with valid params" do
+      it "updates the requested task_type" do
+        task_type = TaskType.create! valid_attributes
+        # Assuming there are no other task_types in the database, this
+        # specifies that the TaskType created on the previous line
+        # receives the :update_attributes message with whatever params are
+        # submitted in the request.
+        TaskType.any_instance.should_receive(:update_attributes).with({'these' => 'params'})
+        put :update, {:id => task_type.to_param, :task_type => {'these' => 'params'}}, valid_session
+      end
+
+      it "assigns the requested task_type as @task_type" do
+        task_type = TaskType.create! valid_attributes
+        put :update, {:id => task_type.to_param, :task_type => valid_attributes}, valid_session
+        assigns(:task_type).should eq(task_type)
+      end
+
+      it "redirects to the task_type" do
+        task_type = TaskType.create! valid_attributes
+        put :update, {:id => task_type.to_param, :task_type => valid_attributes}, valid_session
+        response.should redirect_to(task_type)
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns the task_type as @task_type" do
+        task_type = TaskType.create! valid_attributes
+        # Trigger the behavior that occurs when invalid params are submitted
+        TaskType.any_instance.stub(:save).and_return(false)
+        put :update, {:id => task_type.to_param, :task_type => {}}, valid_session
+        assigns(:task_type).should eq(task_type)
+      end
+
+      it "re-renders the 'edit' template" do
+        task_type = TaskType.create! valid_attributes
+        # Trigger the behavior that occurs when invalid params are submitted
+        TaskType.any_instance.stub(:save).and_return(false)
+        put :update, {:id => task_type.to_param, :task_type => {}}, valid_session
+        response.should render_template("edit")
+      end
+    end
+  end
+
+  describe "DELETE destroy" do
+    it "destroys the requested task_type" do
+      task_type = TaskType.create! valid_attributes
+      expect {
+        delete :destroy, {:id => task_type.to_param}, valid_session
+      }.to change(TaskType, :count).by(-1)
+    end
+
+    it "redirects to the task_types list" do
+      task_type = TaskType.create! valid_attributes
+      delete :destroy, {:id => task_type.to_param}, valid_session
+      response.should redirect_to(task_types_url)
+    end
+  end
+
+end

data/spec/controllers/tasks_controller_spec.disabled

@@ -0,0 +1,23 @@
+require 'spec_helper'
+
+include Devise::TestHelpers
+
+describe TasksController do
+  
+  def valid_attributes
+    {}
+  end
+  
+  def valid_session
+    @user = Factory(:admin)
+    sign_in @user
+    {}
+  end
+  
+  
+  it "get INDEX" do
+    get :index
+    assigns(:tasks).should eq([tasks])
+  end
+  
+end

data/spec/controllers/tests/ajaxes_controller_spec.disabled

@@ -0,0 +1,164 @@
+require 'spec_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+
+describe Tests::AjaxesController do
+
+  # This should return the minimal set of attributes required to create a valid
+  # Tests::Ajax. As you add validations to Tests::Ajax, be sure to
+  # update the return value of this method accordingly.
+  def valid_attributes
+    {}
+  end
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # Tests::AjaxesController. Be sure to keep this updated too.
+  def valid_session
+    {}
+  end
+
+  describe "GET index" do
+    it "assigns all tests_ajaxes as @tests_ajaxes" do
+      ajax = Tests::Ajax.create! valid_attributes
+      get :index, {}, valid_session
+      assigns(:tests_ajaxes).should eq([ajax])
+    end
+  end
+
+  describe "GET show" do
+    it "assigns the requested tests_ajax as @tests_ajax" do
+      ajax = Tests::Ajax.create! valid_attributes
+      get :show, {:id => ajax.to_param}, valid_session
+      assigns(:tests_ajax).should eq(ajax)
+    end
+  end
+
+  describe "GET new" do
+    it "assigns a new tests_ajax as @tests_ajax" do
+      get :new, {}, valid_session
+      assigns(:tests_ajax).should be_a_new(Tests::Ajax)
+    end
+  end
+
+  describe "GET edit" do
+    it "assigns the requested tests_ajax as @tests_ajax" do
+      ajax = Tests::Ajax.create! valid_attributes
+      get :edit, {:id => ajax.to_param}, valid_session
+      assigns(:tests_ajax).should eq(ajax)
+    end
+  end
+
+  describe "POST create" do
+    describe "with valid params" do
+      it "creates a new Tests::Ajax" do
+        expect {
+          post :create, {:tests_ajax => valid_attributes}, valid_session
+        }.to change(Tests::Ajax, :count).by(1)
+      end
+
+      it "assigns a newly created tests_ajax as @tests_ajax" do
+        post :create, {:tests_ajax => valid_attributes}, valid_session
+        assigns(:tests_ajax).should be_a(Tests::Ajax)
+        assigns(:tests_ajax).should be_persisted
+      end
+
+      it "redirects to the created tests_ajax" do
+        post :create, {:tests_ajax => valid_attributes}, valid_session
+        response.should redirect_to(Tests::Ajax.last)
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns a newly created but unsaved tests_ajax as @tests_ajax" do
+        # Trigger the behavior that occurs when invalid params are submitted
+        Tests::Ajax.any_instance.stub(:save).and_return(false)
+        post :create, {:tests_ajax => {}}, valid_session
+        assigns(:tests_ajax).should be_a_new(Tests::Ajax)
+      end
+
+      it "re-renders the 'new' template" do
+        # Trigger the behavior that occurs when invalid params are submitted
+        Tests::Ajax.any_instance.stub(:save).and_return(false)
+        post :create, {:tests_ajax => {}}, valid_session
+        response.should render_template("new")
+      end
+    end
+  end
+
+  describe "PUT update" do
+    describe "with valid params" do
+      it "updates the requested tests_ajax" do
+        ajax = Tests::Ajax.create! valid_attributes
+        # Assuming there are no other tests_ajaxes in the database, this
+        # specifies that the Tests::Ajax created on the previous line
+        # receives the :update_attributes message with whatever params are
+        # submitted in the request.
+        Tests::Ajax.any_instance.should_receive(:update_attributes).with({'these' => 'params'})
+        put :update, {:id => ajax.to_param, :tests_ajax => {'these' => 'params'}}, valid_session
+      end
+
+      it "assigns the requested tests_ajax as @tests_ajax" do
+        ajax = Tests::Ajax.create! valid_attributes
+        put :update, {:id => ajax.to_param, :tests_ajax => valid_attributes}, valid_session
+        assigns(:tests_ajax).should eq(ajax)
+      end
+
+      it "redirects to the tests_ajax" do
+        ajax = Tests::Ajax.create! valid_attributes
+        put :update, {:id => ajax.to_param, :tests_ajax => valid_attributes}, valid_session
+        response.should redirect_to(ajax)
+      end
+    end
+
+    describe "with invalid params" do
+      it "assigns the tests_ajax as @tests_ajax" do
+        ajax = Tests::Ajax.create! valid_attributes
+        # Trigger the behavior that occurs when invalid params are submitted
+        Tests::Ajax.any_instance.stub(:save).and_return(false)
+        put :update, {:id => ajax.to_param, :tests_ajax => {}}, valid_session
+        assigns(:tests_ajax).should eq(ajax)
+      end
+
+      it "re-renders the 'edit' template" do
+        ajax = Tests::Ajax.create! valid_attributes
+        # Trigger the behavior that occurs when invalid params are submitted
+        Tests::Ajax.any_instance.stub(:save).and_return(false)
+        put :update, {:id => ajax.to_param, :tests_ajax => {}}, valid_session
+        response.should render_template("edit")
+      end
+    end
+  end
+
+  describe "DELETE destroy" do
+    it "destroys the requested tests_ajax" do
+      ajax = Tests::Ajax.create! valid_attributes
+      expect {
+        delete :destroy, {:id => ajax.to_param}, valid_session
+      }.to change(Tests::Ajax, :count).by(-1)
+    end
+
+    it "redirects to the tests_ajaxes list" do
+      ajax = Tests::Ajax.create! valid_attributes
+      delete :destroy, {:id => ajax.to_param}, valid_session
+      response.should redirect_to(tests_ajaxes_url)
+    end
+  end
+
+end

data/spec/factories.rb

@@ -0,0 +1,101 @@
+FactoryGirl.define do
+
+  factory :user do
+    sequence(:name)  { Faker::Name.name }
+    sequence(:email) { |n| "person_#{n}@example.com"}   
+    password "foobar"
+    password_confirmation "foobar"
+    enabled true
+    
+    factory :admin do
+      admin true
+    end
+  end
+  
+  factory :customer do
+    sequence(:name) { |n|   "#{Faker::Name.name}#{n}" }
+    birthday 100.years.ago
+    doc '0'*14
+    complete false
+    
+    factory :interested do
+      #specialized
+    end
+  end
+  
+  
+  factory :customer_pj do
+    fax 9999
+    after_build do |pj|
+      FactoryGirl.create(:customer, :person => pj)
+    end
+  end
+
+  factory :micropost do
+    content "Lorem ipsum"
+    user
+  end
+  
+  factory :contact do
+    sequence(:name)  { |n| "Person #{n}" }
+    sequence(:birthday) { |n| (n+15).years.ago }
+    customer
+  end
+  
+  factory :email do
+    email Faker::Internet.email
+  end
+  
+  factory :system_ability do
+    factory :read do
+      name "READ"
+    end
+  end
+  
+  factory :system_module do
+    factory :module_customer do
+      name "Customer"
+    end
+  end
+  
+  factory :state do
+    name { Faker::Name.name }
+  end
+    
+  factory :city do
+    name { Faker::Name.name }
+  end
+  
+  factory :district do
+    name { Faker::Name.name }
+  end
+  
+  factory :business_segment do
+    name { Faker::Name.name }
+  end
+  
+  factory :business_activity do
+    name { Faker::Name.name }
+  end
+  
+  factory :user_ability do
+    skilled_id
+    skilled_type "User"
+    ability_id
+    module_id
+  end
+  
+  factory :user_group do
+    sequence(:name)  { |n| "Group #{n}" }
+    factory :group_able_users do
+      after_build do |g|
+      
+      end
+    end
+  end
+  
+  factory :status do
+    name { Faker::Name.first }
+  end
+
+end