gstreamer 3.0.7-x86-mingw32 → 3.0.8-x86-mingw32

data/vendor/local/include/gstreamer-1.0/gst/check/gstconsistencychecker.h

@@ -1,48 +0,0 @@
-/* GStreamer
- *
- * unit testing helper lib
- *
- * Copyright (C) 2009 Edward Hervey <bilboed@bilboed.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Library General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Library General Public License for more details.
- *
- * You should have received a copy of the GNU Library General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __GST_CONSISTENCY_CHECKER_H__
-#define __GST_CONSISTENCY_CHECKER_H__
-
-#include <gst/check/gstcheck.h>
-
-G_BEGIN_DECLS
-
-/**
- * GstStreamConsistency:
- *
- * Opaque consistency checker handle.
- */
-typedef struct _GstStreamConsistency GstStreamConsistency;
-
-
-GstStreamConsistency * gst_consistency_checker_new     (GstPad * pad);
-gboolean               gst_consistency_checker_add_pad (GstStreamConsistency * consist,
-                                                        GstPad * pad);
-
-void                   gst_consistency_checker_reset   (GstStreamConsistency * consist);
-
-void                   gst_consistency_checker_free    (GstStreamConsistency * consist);
-
-G_END_DECLS
-
-#endif /* __GST_CONSISTENCY_CHECKER_H__ */

data/vendor/local/include/gstreamer-1.0/gst/check/gsttestclock.h

@@ -1,119 +0,0 @@
-/* GstTestClock - A deterministic clock for GStreamer unit tests
- *
- * Copyright (C) 2008 Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
- * Copyright (C) 2012 Sebastian Rasmussen <sebastian.rasmussen@axis.com>
- * Copyright (C) 2012 Havard Graff <havard@pexip.com>
- * Copyright (C) 2013 Haakon Sporsheim <haakon@pexip.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Library General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Library General Public License for more details.
- *
- * You should have received a copy of the GNU Library General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-#ifndef __GST_TEST_CLOCK_H__
-#define __GST_TEST_CLOCK_H__
-
-#include <gst/gst.h>
-
-G_BEGIN_DECLS
-
-#define GST_TYPE_TEST_CLOCK (gst_test_clock_get_type ())
-#define GST_TEST_CLOCK(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj),\
-    GST_TYPE_TEST_CLOCK, GstTestClock))
-#define GST_IS_TEST_CLOCK(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj),\
-    GST_TYPE_TEST_CLOCK))
-#define GST_TEST_CLOCK_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass),\
-    GST_TYPE_TEST_CLOCK, GstTestClockClass))
-#define GST_IS_TEST_CLOCK_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE (\
-    (klass), GST_TYPE_TEST_CLOCK))
-#define GST_TEST_CLOCK_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS (\
-    (obj), GST_TYPE_TEST_CLOCK, GstTestClockClass))
-#define GST_TEST_CLOCK_CAST(obj) ((GstTestClock*)(obj))
-
-typedef struct _GstTestClock GstTestClock;
-typedef struct _GstTestClockClass GstTestClockClass;
-typedef struct _GstTestClockPrivate GstTestClockPrivate;
-
-/**
- * GstTestClock:
- *
- * A #GstTestClock structure which is based on a #GstClock along with some
- * private data.
- *
- * Since: 1.2
- */
-struct _GstTestClock
-{
-  GstClock parent;
-
-  /*< private >*/
-  GstTestClockPrivate *priv;
-};
-
-/**
- * GstTestClockClass:
- * @parent_class: the parent class structure
- *
- * The class of a #GstTestClock, which has no virtual methods to override.
- *
- * Since: 1.2
- */
-struct _GstTestClockClass
-{
-  GstClockClass parent_class;
-};
-
-GType         gst_test_clock_get_type (void);
-
-GstClock *    gst_test_clock_new (void);
-
-GstClock *    gst_test_clock_new_with_start_time (GstClockTime start_time);
-
-void          gst_test_clock_set_time (GstTestClock * test_clock,
-                                      GstClockTime   new_time);
-
-void          gst_test_clock_advance_time (GstTestClock *   test_clock,
-                                          GstClockTimeDiff delta);
-
-guint         gst_test_clock_peek_id_count (GstTestClock * test_clock);
-
-gboolean      gst_test_clock_has_id (GstTestClock * test_clock, GstClockID id);
-
-gboolean      gst_test_clock_peek_next_pending_id (GstTestClock * test_clock,
-                                                   GstClockID   * pending_id);
-
-void          gst_test_clock_wait_for_next_pending_id (GstTestClock * test_clock,
-                                                       GstClockID   * pending_id);
-
-#ifndef GST_DISABLE_DEPRECATED
-void          gst_test_clock_wait_for_pending_id_count (GstTestClock * test_clock,
-                                                        guint          count);
-#endif
-
-GstClockID    gst_test_clock_process_next_clock_id (GstTestClock * test_clock);
-
-GstClockTime  gst_test_clock_get_next_entry_time   (GstTestClock * test_clock);
-
-void          gst_test_clock_wait_for_multiple_pending_ids (GstTestClock * test_clock,
-                                                            guint          count,
-                                                            GList       ** pending_list);
-
-guint         gst_test_clock_process_id_list (GstTestClock * test_clock,
-                                              const GList  * pending_list);
-
-GstClockTime  gst_test_clock_id_list_get_latest_time (const GList * pending_list);
-
-G_END_DECLS
-
-#endif /* __GST_TEST_CLOCK_H__ */

data/vendor/local/include/gstreamer-1.0/gst/check/internal-check.h

@@ -1,1242 +0,0 @@
-/*-*- mode:C; -*- */
-/*
- * Check: a unit test framework for C
- * Copyright (C) 2001, 2002, Arien Malec
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-#ifndef CHECK_H
-#define CHECK_H
-
-#include <stddef.h>
-#include <string.h>
-
-/*
-   Macros and functions starting with _ (underscore) are internal and
-   may change without notice. You have been warned!.
-*/
-
-
-#ifdef __cplusplus
-#define CK_CPPSTART extern "C" {
-#define CK_CPPEND }
-CK_CPPSTART
-#endif
-#if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#define GCC_VERSION_AT_LEAST(major, minor) \
-((__GNUC__ > (major)) || \
- (__GNUC__ == (major) && __GNUC_MINOR__ >= (minor)))
-#else
-#define GCC_VERSION_AT_LEAST(major, minor) 0
-#endif
-#if GCC_VERSION_AT_LEAST(2,95)
-#define CK_ATTRIBUTE_UNUSED __attribute__ ((unused))
-#else
-#define CK_ATTRIBUTE_UNUSED
-#endif /* GCC 2.95 */
-#if GCC_VERSION_AT_LEAST(2,5)
-#define CK_ATTRIBUTE_NORETURN __attribute__ ((noreturn))
-#else
-#define CK_ATTRIBUTE_NORETURN
-#endif /* GCC 2.5 */
-#include <sys/types.h>
-/*
- * Used to create the linker script for hiding lib-local symbols. Shall
- * be put directly in front of the exported symbol.
- */
-#define CK_EXPORT
-/*
- * Used for MSVC to create the export attribute
- * CK_DLL_EXP is defined during the compilation of the library
- * on the command line.
- */
-#ifndef CK_DLL_EXP
-#define CK_DLL_EXP
-#endif
-/* check version numbers */
-#define CHECK_MAJOR_VERSION (0)
-#define CHECK_MINOR_VERSION (9)
-#define CHECK_MICRO_VERSION (14)
-CK_DLL_EXP extern int CK_EXPORT check_major_version;
-CK_DLL_EXP extern int CK_EXPORT check_minor_version;
-CK_DLL_EXP extern int CK_EXPORT check_micro_version;
-
-#ifndef NULL
-#define NULL ((void*)0)
-#endif
-
-/**
- * Type for a test case
- *
- * A TCase represents a test case.  Create with tcase_create, free
- * with tcase_free.  For the moment, test cases can only be run
- * through a suite
-*/
-typedef struct TCase TCase;
-
-/**
- * Type for a test function
- */
-typedef void (*TFun) (int);
-
-/**
- * Type for a setup/teardown function
- */
-typedef void (*SFun) (void);
-
-/**
- * Type for a test suite
- */
-typedef struct Suite Suite;
-
-/**
- * Creates a test suite with the given name.
- *
- * Create a suite, which will contain test cases. Once
- * created, use suite_add_tcase() to add test cases.
- * When finished, create a suite runner from the
- * suite using srunner_create()
- *
- * @param name name of the suite
- *
- * @return suite
- *
- * @since 0.6.0
- */
-CK_DLL_EXP Suite *CK_EXPORT suite_create (const char *name);
-
-/**
- * Determines whether a given test suite contains a case named after a
- * given string.
- *
- * @param s suite to check
- * @param tcname test case to look for
- *
- * @return 1 iff the given test case is within the given suite;
- *          0 otherwise
- *
- * @since 0.9.9
- */
-CK_DLL_EXP int CK_EXPORT suite_tcase (Suite * s, const char *tcname);
-
-/**
- * Add a test case to a suite
- *
- * @param s suite to add test case to
- * @param tc test case to add to suite
- *
- * @since 0.6.0
- */
-CK_DLL_EXP void CK_EXPORT suite_add_tcase (Suite * s, TCase * tc);
-
-/**
- * Create a test case.
- *
- * Once created, tests can be added with the tcase_add_test()
- * function, and the test case assigned to a suite with the
- * suite_add_tcase() function.
- *
- * @param name name of the test case
- *
- * @return test case containing no tests
- *
- * @since 0.6.0
- * */
-CK_DLL_EXP TCase *CK_EXPORT tcase_create (const char *name);
-
-/**
- * Add a test function to a test case
- *
- * @param tc test case to add test to
- * @param tf test function to add to test case
- *
- * @since 0.6.0
- * */
-#define tcase_add_test(tc,tf) tcase_add_test_raise_signal(tc,tf,0)
-
-/**
- * Add a test function with signal handling to a test case
- *
- * The added test is expected to terminate by throwing the given signal
- *
- * @param tc test case to add test to
- * @param tf test function to add to test case
- * @param signal expected signal for test function to throw in order for
- *                the test to be considered passing
- *
- * @since 0.9.2
- * */
-#define tcase_add_test_raise_signal(tc,tf,signal) \
-   _tcase_add_test((tc),(tf),"" # tf "",(signal), 0, 0, 1)
-
-/**
- * Add a test function with an expected exit value to a test case
- *
- * The added test is expected to terminate by exiting with the given value
- *
- * @param tc test case to add test to
- * @param tf test function to add to test case
- * @param expected_exit_value exit value for test function to return in
- *                             order for the test to be considered passing
- *
- * @since 0.9.7
- */
-#define tcase_add_exit_test(tc, tf, expected_exit_value) \
-  _tcase_add_test((tc),(tf),"" # tf "",0,(expected_exit_value),0,1)
-
-/**
- * Add a looping test function to a test case
- *
- * The test will be called in a for(i = s; i < e; i++) loop with each
- * iteration being executed in a new context. The loop variable 'i' is
- * available in the test.
- *
- * @param tc test case to add test to
- * @param tf function to add to test case
- * @param s starting index for value "i" in test
- * @param e ending index for value "i" in test
- *
- * @since 0.9.4
- */
-#define tcase_add_loop_test(tc,tf,s,e) \
-  _tcase_add_test((tc),(tf),"" # tf "",0,0,(s),(e))
-
-/**
- * Add a looping test function with signal handling to a test case
- *
- * The test will be called in a for(i = s; i < e; i++) loop with each
- * iteration being executed in a new context. The loop variable 'i' is
- * available in the test.
- *
- * The added test is expected to terminate by throwing the given signal
- *
- * @param tc test case to add test to
- * @param tf function to add to test case
- * @param signal expected signal for test function to throw in order for
- *                the test to be considered passing
- * @param s starting index for value "i" in test
- * @param e ending index for value "i" in test
- *
- * @since 0.9.5
- */
-#define tcase_add_loop_test_raise_signal(tc,tf,signal,s,e) \
-  _tcase_add_test((tc),(tf),"" # tf "",(signal),0,(s),(e))
-
-/**
- * Add a looping test function with an expected exit value to a test case
- *
- * The test will be called in a for(i = s; i < e; i++) loop with each
- * iteration being executed in a new context. The loop variable 'i' is
- * available in the test.
- *
- * The added test is expected to terminate by exiting with the given value
- *
- * @param tc test case to add test to
- * @param tf function to add to test case
- * @param expected_exit_value exit value for test function to return in
- *                             order for the test to be considered passing
- * @param s starting index for value "i" in test
- * @param e ending index for value "i" in test
- *
- * @since 0.9.7
- */
-#define tcase_add_loop_exit_test(tc,tf,expected_exit_value,s,e) \
-  _tcase_add_test((tc),(tf),"" # tf "",0,(expected_exit_value),(s),(e))
-
-/* Add a test function to a test case
-  (function version -- use this when the macro won't work
-*/
-CK_DLL_EXP void CK_EXPORT _tcase_add_test (TCase * tc, TFun tf,
-    const char *fname, int _signal, int allowed_exit_value, int start, int end);
-
-/**
- * Add unchecked fixture setup/teardown functions to a test case
- *
- * Unchecked fixture functions are run at the start and end of the
- * test case, and not before and after unit tests. Further,
- * unchecked fixture functions are not run in a separate address space,
- * like test functions, and so must not exit or signal (e.g.,
- * segfault).
- *
- * Also, when run in CK_NOFORK mode, unchecked fixture functions may
- * lead to different unit test behavior if unit tests change data
- * setup by the fixture functions.
- *
- * Note that if a setup function fails, the remaining setup functions
- * will be omitted, as will the test case and the teardown functions.
- * If a teardown function fails the remaining teardown functins will be
- * omitted.
- *
- * @param tc test case to add unchecked fixture setup/teardown to
- * @param setup function to add to be executed before the test case;
- *               if NULL no setup function is added
- * @param teardown function to add to be executed after the test case;
- *               if NULL no teardown function is added
- * @since 0.8.0
- */
-CK_DLL_EXP void CK_EXPORT tcase_add_unchecked_fixture (TCase * tc, SFun setup,
-    SFun teardown);
-
-/**
- * Add checked fixture setup/teardown functions to a test case
- *
- * Checked fixture functions are run before and after each unit test inside
- * of the address space of the test. Thus, if using CK_FORK
- * mode the separate process running the unit test will survive signals
- * or unexpected exits in the fixture function. Also, if the setup
- * function is idempotent, unit test behavior will be the same in
- * CK_FORK and CK_NOFORK modes.
- *
- * However, since fixture functions are run before and after each unit
- * test, they should not be expensive code.
- *
- * Note that if a setup function fails, the remaining setup functions
- * will be omitted, as will the test and the teardown functions. If a
- * teardown function fails the remaining teardown functins will be
- * omitted.
- *
- * @param tc test case to add checked fixture setup/teardown to
- * @param setup function to add to be executed before each unit test in
- *               the test case;  if NULL no setup function is added
- * @param teardown function to add to be executed after each unit test in
- *               the test case; if NULL no teardown function is added
- *
- * @since 0.8.0
-*/
-CK_DLL_EXP void CK_EXPORT tcase_add_checked_fixture (TCase * tc, SFun setup,
-    SFun teardown);
-
-/**
- * Set the timeout for all tests in a test case.
- *
- * A test that lasts longer than the timeout (in seconds) will be killed
- * and thus fail with an error.
- *
- * If not set, the default timeout is one assigned at compile time. If
- * the environment variable CK_DEFAULT_TIMEOUT is defined and no timeout
- * is set, the value in the environment variable is used.
- *
- * @param tc test case to assign timeout to
- * @param timeout to use, in seconds. If the value contains a decimal
- *                 portion, but no high resolution timer is available,
- *                 the value is rounded up to the nearest second.
- *
- * @since 0.9.2
- */
-CK_DLL_EXP void CK_EXPORT tcase_set_timeout (TCase * tc, double timeout);
-
-/* Internal function to mark the start of a test function */
-CK_DLL_EXP void CK_EXPORT tcase_fn_start (const char *fname, const char *file,
-    int line);
-
-/**
- * Start a unit test with START_TEST(unit_name), end with END_TEST.
- *
- * One must use braces within a START_/END_ pair to declare new variables
- *
- * @since 0.6.0
- */
-#define START_TEST(__testname)\
-static void __testname (int _i CK_ATTRIBUTE_UNUSED)\
-{\
-  tcase_fn_start (""# __testname, __FILE__, __LINE__);
-
-/**
- *  End a unit test
- *
- * @since 0.6.0
- */
-#define END_TEST }
-
-/*
- * Fail the test case unless expr is false
- *
- * This call is deprecated.
- */
-#define fail_unless ck_assert_msg
-
-/*
- * Fail the test case if expr is false
- *
- * This call is deprecated.
- *
- * NOTE: The space before the comma sign before ## is essential to be compatible
- * with gcc 2.95.3 and earlier.
- * FIXME: these macros may conflict with C89 if expr is
- * FIXME:   strcmp (str1, str2) due to excessive string length.
- */
-#define fail_if(expr, ...)\
-  (expr) ? \
-     _ck_assert_failed(__FILE__, __LINE__, "Failure '"#expr"' occurred" , ## __VA_ARGS__, NULL) \
-     : _mark_point(__FILE__, __LINE__)
-
-/*
- * Fail the test
- *
- * This call is deprecated.
- */
-#define fail ck_abort_msg
-
-/*
- * This is called whenever an assertion fails.
- * Note that it only has the noreturn modifier when
- * using fork. If fork is unavailable, the function
- * calls longjmp() when a test assertion fails. Marking
- * the function as noreturn causes gcc to make assumptions
- * which are not valid, as longjmp() is like a return.
- */
-#if 0
-CK_DLL_EXP void CK_EXPORT
-_ck_assert_failed (const char *file, int line, const char *expr, ...)
-    CK_ATTRIBUTE_NORETURN;
-#else
-CK_DLL_EXP void CK_EXPORT _ck_assert_failed (const char *file, int line,
-    const char *expr, ...);
-#endif
-
-/**
- * Fail the test if expression is false
- *
- * @param expr expression to evaluate
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert(expr) ck_assert_msg(expr, NULL)
-
-/* The space before the comma sign before ## is essential to be compatible
-   with gcc 2.95.3 and earlier.
-*/
-/**
- * Fail the test if the expression is false; print message on failure
- *
- * @param expr expression to evaluate
- * @param ... message to print (in printf format) if expression is false
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert_msg(expr, ...) \
-  (expr) ? \
-     _mark_point(__FILE__, __LINE__) : \
-     _ck_assert_failed(__FILE__, __LINE__, "Assertion '"#expr"' failed" , ## __VA_ARGS__, NULL)
-
-/**
- * Unconditionally fail the test
- *
- * @note Once called, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_abort() ck_abort_msg(NULL)
-/**
- * Unconditionally fail the test; print a message
- *
- * @param ... message to print (in printf format)
- *
- * @note Once called, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_abort_msg(...) _ck_assert_failed(__FILE__, __LINE__, "Failed" , ## __VA_ARGS__, NULL)
-
-/* Signed and unsigned integer comparison macros with improved output compared to ck_assert(). */
-/* OP may be any comparison operator. */
-#define _ck_assert_int(X, OP, Y) do { \
-  gint64 _ck_x = (X); \
-  gint64 _ck_y = (Y); \
-  ck_assert_msg(_ck_x OP _ck_y, "Assertion '%s' failed: " \
-      "%s==%" G_GINT64_FORMAT ", %s==%" G_GINT64_FORMAT, #X#OP#Y, #X, _ck_x, #Y, _ck_y); \
-} while (0)
-
-/**
- * Check two signed integers to determine if X==Y
- *
- * If not X==Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert_int_eq(X, Y) _ck_assert_int(X, ==, Y)
-/**
- * Check two signed integers to determine if X!=Y
- *
- * If not X!=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert_int_ne(X, Y) _ck_assert_int(X, !=, Y)
-/**
- * Check two signed integers to determine if X<Y
- *
- * If not X<Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_int_lt(X, Y) _ck_assert_int(X, <, Y)
-/**
- * Check two signed integers to determine if X<=Y
- *
- * If not X<=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_int_le(X, Y) _ck_assert_int(X, <=, Y)
-/**
- * Check two signed integers to determine if X>Y
- *
- * If not X>Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_int_gt(X, Y) _ck_assert_int(X, >, Y)
-/**
- * Check two signed integers to determine if X>=Y
- *
- * If not X>=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_int_ge(X, Y) _ck_assert_int(X, >=, Y)
-
-#define _ck_assert_uint(X, OP, Y) do { \
-  guint64 _ck_x = (X); \
-  guint64 _ck_y = (Y); \
-  ck_assert_msg(_ck_x OP _ck_y, "Assertion '%s' failed: " \
-      "%s==%" G_GUINT64_FORMAT ", %s==%" G_GUINT64_FORMAT, #X#OP#Y, #X, _ck_x, #Y, _ck_y); \
-} while (0)
-/**
- * Check two unsigned integers to determine if X==Y
- *
- * If not X==Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_eq(X, Y) _ck_assert_uint(X, ==, Y)
-/**
- * Check two unsigned integers to determine if X!=Y
- *
- * If not X!=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_ne(X, Y) _ck_assert_uint(X, !=, Y)
-/**
- * Check two unsigned integers to determine if X<Y
- *
- * If not X<Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_lt(X, Y) _ck_assert_uint(X, <, Y)
-/**
- * Check two unsigned integers to determine if X<=Y
- *
- * If not X<=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_le(X, Y) _ck_assert_uint(X, <=, Y)
-/**
- * Check two unsigned integers to determine if X>Y
- *
- * If not X>Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_gt(X, Y) _ck_assert_uint(X, >, Y)
-/**
- * Check two unsigned integers to determine if X>=Y
- *
- * If not X>=Y, the test fails.
- *
- * @param X signed integer
- * @param Y signed integer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_uint_ge(X, Y) _ck_assert_uint(X, >=, Y)
-
-/* String comparison macros with improved output compared to ck_assert() */
-/* OP might be any operator that can be used in '0 OP strcmp(X,Y)' comparison */
-/* The x and y parameter swap in strcmp() is needed to handle >, >=, <, <= operators */
-#define _ck_assert_str(X, OP, Y) do { \
-  const char* _ck_x = (X); \
-  const char* _ck_y = (Y); \
-  ck_assert_msg(0 OP strcmp(_ck_y, _ck_x), \
-    "Assertion '%s' failed: %s==\"%s\", %s==\"%s\"", #X#OP#Y, #X, _ck_x, #Y, _ck_y); \
-} while (0)
-/**
- * Check two strings to determine if 0==strcmp(X,Y)
- *
- * If not 0==strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert_str_eq(X, Y) _ck_assert_str(X, ==, Y)
-/**
- * Check two strings to determine if 0!=strcmp(X,Y)
- *
- * If not 0!=strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.6
- */
-#define ck_assert_str_ne(X, Y) _ck_assert_str(X, !=, Y)
-/**
- * Check two strings to determine if 0<strcmp(X,Y), (e.g. strcmp(X,Y)>0)
- *
- * If not 0<strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_str_lt(X, Y) _ck_assert_str(X, <, Y)
-/**
- * Check two strings to determine if 0<=strcmp(X,Y) (e.g. strcmp(X,Y)>=0)
- *
- * If not 0<=strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_str_le(X, Y) _ck_assert_str(X, <=, Y)
-/**
- * Check two strings to determine if 0<strcmp(X,Y) (e.g. strcmp(X,Y)>0)
- *
- * If not 0<strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_str_gt(X, Y) _ck_assert_str(X, >, Y)
-/**
- * Check two strings to determine if 0>=strcmp(X,Y) (e.g. strcmp(X,Y)<=0)
- *
- * If not 0>=strcmp(X,Y), the test fails.
- *
- * @param X string
- * @param Y string to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_str_ge(X, Y) _ck_assert_str(X, >=, Y)
-
-/* Pointer comparison macros with improved output compared to ck_assert(). */
-/* OP may only be == or !=  */
-#define _ck_assert_ptr(X, OP, Y) do { \
-  const void* _ck_x = (X); \
-  const void* _ck_y = (Y); \
-  ck_assert_msg(_ck_x OP _ck_y, "Assertion '%s' failed: %s==%#x, %s==%#x", #X#OP#Y, #X, _ck_x, #Y, _ck_y); \
-} while (0)
-
-/**
- * Check if two pointers are equal.
- *
- * If the two passed pointers are not equal, the test
- * fails.
- *
- * @param X pointer
- * @param Y pointer to compare against X
- *
- * @note If the check fails, the remaining of the test is aborted
- *
- * @since 0.9.10
- */
-#define ck_assert_ptr_eq(X, Y) _ck_assert_ptr(X, ==, Y)
-
-/**
- * Check if two pointers are not.
- *
- * If the two passed pointers are equal, the test fails.
- *
- * @param X pointer
- * @param Y pointer to compare against X
- *
- * @since 0.9.10
- */
-#define ck_assert_ptr_ne(X, Y) _ck_assert_ptr(X, !=, Y)
-
-/**
- * Mark the last point reached in a unit test.
- *
- * If the test throws a signal or exits, the location noted with the
- * failure is the last location of a ck_assert*() or ck_abort() call.
- * Use mark_point() to record intermediate locations (useful for tracking down
- * crashes or exits).
- *
- * @since 0.6.0
-*/
-#define mark_point() _mark_point(__FILE__,__LINE__)
-
-/* Non macro version of #mark_point */
-CK_DLL_EXP void CK_EXPORT _mark_point (const char *file, int line);
-
-/**
- * Enum describing the possible results of a test
- */
-enum test_result
-{
-  CK_TEST_RESULT_INVALID,       /**< Default value; should not encounter this */
-  CK_PASS,                      /**< Test passed */
-  CK_FAILURE,                   /**< Test completed but failed */
-  CK_ERROR                      /**< Test failed to complete
-                                   (unexpected signal or non-zero early exit) */
-};
-
-/**
- * Enum specifying the verbosity of output a SRunner should produce
- */
-enum print_output
-{
-  CK_SILENT,                    /**< No output */
-  CK_MINIMAL,                   /**< Only summary output */
-  CK_NORMAL,                    /**< All failed tests */
-  CK_VERBOSE,                   /**< All tests */
-  CK_ENV,                       /**< Look at environment var CK_VERBOSITY
-                                     for what verbosity to use, which can be
-                                     either "silent", "minimal", "normal",
-                                     or "verbose". If the environment variable
-                                     is not set, then CK_NORMAL will be used.*/
-#if 0
-  CK_SUBUNIT,                   /**< Run as a subunit child process */
-#endif
-  CK_LAST                       /**< Not a valid option */
-};
-
-/**
- * Holds state for a running of a test suite
- */
-typedef struct SRunner SRunner;
-
-/**
- * Opaque type for a test failure
- */
-typedef struct TestResult TestResult;
-
-/**
- * Enum representing the types of contexts for a test
- */
-enum ck_result_ctx
-{
-  CK_CTX_INVALID,               /**< Default value; should not encounter this */
-  CK_CTX_SETUP,                 /**< Setup before a test */
-  CK_CTX_TEST,                  /**< Body of test itself */
-  CK_CTX_TEARDOWN               /**< Teardown after a test */
-};
-
-/**
- * Retrieve type of result that the given test result represents.
- *
- * This is a member of test_result, and can represent a
- * pass, failure, or error.
- *
- * @param tr test result to retrieve result from
- *
- * @return result of given test
- *
- * @since 0.6.0
- */
-CK_DLL_EXP int CK_EXPORT tr_rtype (TestResult * tr);
-
-/**
- * Retrieve context in which the result occurred for the given test result.
- *
- * The types of contents include the test setup, teardown, or the
- * body of the test itself.
- *
- * @param tr test result to retrieve context from
- *
- * @return context to which the given test result applies
- *
- * @since 0.8.0
- */
-CK_DLL_EXP enum ck_result_ctx CK_EXPORT tr_ctx (TestResult * tr);
-
-/**
- * Retrieve failure message from test result, if applicable.
- *
- * @return pointer to a message, if one exists. NULL otherwise.
- *
- * @since 0.6.0
- */
-CK_DLL_EXP const char *CK_EXPORT tr_msg (TestResult * tr);
-
-/**
- * Retrieve line number at which a failure occurred, if applicable.
- *
- * @return If the test resulted in a failure, returns the line number
- *          that the failure occurred on; otherwise returns -1.
- *
- * @since 0.6.0
- */
-CK_DLL_EXP int CK_EXPORT tr_lno (TestResult * tr);
-
-/**
- * Retrieve file name at which a failure occurred, if applicable.
- *
- * @return If the test resulted in a failure, returns a string
- *          containing the name of the file where the failure
- *          occurred; otherwise returns NULL.
- *
- * @since 0.6.0
- */
-CK_DLL_EXP const char *CK_EXPORT tr_lfile (TestResult * tr);
-
-/**
- * Retrieve test case name in which a failure occurred, if applicable.
- *
- * @return If the test resulted in a failure, returns a string
- *          containing the name of the test suite where the failure
- *          occurred; otherwise returns NULL.
- *
- * @since 0.6.0
- */
-CK_DLL_EXP const char *CK_EXPORT tr_tcname (TestResult * tr);
-
-/**
- * Creates a suite runner for the given suite.
- *
- * Once created, additional suites can be added to the
- * suite runner using srunner_add_suite(), and the suite runner can be
- * run with srunner_run_all(). Once finished, the suite runner
- * must be freed with srunner_free().
- *
- * @param s suite to generate a suite runner for
- *
- * @return suite runner for the given suite
- *
- * @since 0.6.0
- */
-CK_DLL_EXP SRunner *CK_EXPORT srunner_create (Suite * s);
-
-/**
- * Add an additional suite to a suite runner.
- *
- * The first suite in a suite runner is always added in srunner_create().
- * This call adds additional suites to a suite runner.
- *
- * @param sr suite runner to add the given suite
- * @param s suite to add to the given suite runner
- *
- * @since 0.7.0
- */
-CK_DLL_EXP void CK_EXPORT srunner_add_suite (SRunner * sr, Suite * s);
-
-/**
- * Frees a suite runner, including all contained suite and test cases.
- *
- * This call is responsible for freeing all resources related to a
- * suite runner and all contained suites and test cases. Suite and
- * test cases need not be freed individually, as this call handles that.
- *
- * @param sr suite runner to free
- *
- * @since 0.6.0
- */
-CK_DLL_EXP void CK_EXPORT srunner_free (SRunner * sr);
-
-/**
- * Runs a suite runner and all contained suite, printing results to
- * stdout as specified by the print_mode.
- *
- * In addition to running all suites, if the suite runner has been
- * configured to output to a log, that is also performed.
- *
- * Note that if the CK_RUN_CASE and/or CK_RUN_SUITE environment variables
- * are defined, then only the named suite and/or test case is run.
- *
- * @param sr suite runner to run all suites from
- * @param print_mode the verbosity in which to report results to stdout
- *
- * @since 0.6.0
- */
-CK_DLL_EXP void CK_EXPORT srunner_run_all (SRunner * sr,
-    enum print_output print_mode);
-
-/**
- * Run a specific suite or test case from a suite runner, printing results
- * to stdout as specified by the print_mode.
- *
- * In addition to running any applicable suites or test cases, if the
- * suite runner has been configured to output to a log, that is also
- * performed.
- *
- * @param sr suite runner where the given suite or test case must be
- * @param sname suite name to run. A NULL means "any suite".
- * @param tcname test case name to run. A NULL means "any test case"
- * @param print_mode the verbosity in which to report results to stdout
- *
- * @since 0.9.9
- */
-CK_DLL_EXP void CK_EXPORT srunner_run (SRunner * sr, const char *sname,
-    const char *tcname, enum print_output print_mode);
-
-
-/**
- * Retrieve the number of failed tests executed by a suite runner.
- *
- * This value represents both test failures and errors.
- *
- * @param sr suite runner to query for all failed tests
- *
- * @return number of test failures and errors found by the suite runner
- *
- * @since 0.6.1
- */
-CK_DLL_EXP int CK_EXPORT srunner_ntests_failed (SRunner * sr);
-
-/**
- * Retrieve the total number of tests run by a suite runner.
- *
- * @param sr suite runner to query for all tests run
- *
- * @return number of all tests run by the suite runner
- *
- * @since 0.6.1
- */
-CK_DLL_EXP int CK_EXPORT srunner_ntests_run (SRunner * sr);
-
-/**
- * Return an array of results for all failures found by a suite runner.
- *
- * Number of results is equal to srunner_nfailed_tests().
- *
- * Information about individual results can be queried using:
- * tr_rtype(), tr_ctx(), tr_msg(), tr_lno(), tr_lfile(), and tr_tcname().
- *
- * Memory is malloc'ed and must be freed; however free the entire structure
- * instead of individual test cases.
- *
- * @param sr suite runner to retrieve results from
- *
- * @return array of TestResult objects
- *
- * @since 0.6.0
- */
-CK_DLL_EXP TestResult **CK_EXPORT srunner_failures (SRunner * sr);
-
-/**
- * Return an array of results for all tests run by a suite runner.
- *
- * Number of results is equal to srunner_ntests_run(), and excludes
- * failures due to setup function failure.
- *
- * Information about individual results can be queried using:
- * tr_rtype(), tr_ctx(), tr_msg(), tr_lno(), tr_lfile(), and tr_tcname().
- *
- * Memory is malloc'ed and must be freed; however free the entire structure
- * instead of individual test cases.
- *
- * @param sr suite runner to retrieve results from
- *
- * @return array of TestResult objects
- *
- * @since 0.6.1
-*/
-CK_DLL_EXP TestResult **CK_EXPORT srunner_results (SRunner * sr);
-
-/**
- * Print the results contained in an SRunner to stdout.
- *
- * @param sr suite runner to print results for to stdout
- * @param print_mode the print_output (verbosity) to use to report
- *         the result
- *
- * @since 0.7.0
- */
-CK_DLL_EXP void CK_EXPORT srunner_print (SRunner * sr,
-    enum print_output print_mode);
-
-/**
- * Set the suite runner to output the result in log format to the
- * given file.
- *
- * Note: log file setting is an initialize only operation -- it should
- * be done immediately after SRunner creation, and the log file can't be
- * changed after being set.
- *
- * This setting does not conflict with the other log output types;
- * all logging types can occur concurrently if configured.
- *
- * @param sr suite runner to log results of in log format
- * @param fname file name to output log results to
- *
- * @since 0.7.1
-*/
-CK_DLL_EXP void CK_EXPORT srunner_set_log (SRunner * sr, const char *fname);
-
-/**
- * Checks if the suite runner is assigned a file for log output.
- *
- * @param sr suite runner to check
- *
- * @return 1 iff the suite runner currently is configured to output
- *         in log format; 0 otherwise
- *
- * @since 0.7.1
- */
-CK_DLL_EXP int CK_EXPORT srunner_has_log (SRunner * sr);
-
-/**
- * Retrieves the name of the currently assigned file
- * for log output, if any exists.
- *
- * @return the name of the log file, or NULL if none is configured
- *
- * @since 0.7.1
- */
-CK_DLL_EXP const char *CK_EXPORT srunner_log_fname (SRunner * sr);
-
-/**
- * Set the suite runner to output the result in XML format to the
- * given file.
- *
- * Note: XML file setting is an initialize only operation -- it should
- * be done immediately after SRunner creation, and the XML file can't be
- * changed after being set.
- *
- * This setting does not conflict with the other log output types;
- * all logging types can occur concurrently if configured.
- *
- * @param sr suite runner to log results of in XML format
- * @param fname file name to output XML results to
- *
- * @since 0.9.1
-*/
-CK_DLL_EXP void CK_EXPORT srunner_set_xml (SRunner * sr, const char *fname);
-
-/**
- * Checks if the suite runner is assigned a file for XML output.
- *
- * @param sr suite runner to check
- *
- * @return 1 iff the suite runner currently is configured to output
- *         in XML format; 0 otherwise
- *
- * @since 0.9.1
- */
-CK_DLL_EXP int CK_EXPORT srunner_has_xml (SRunner * sr);
-
-/**
- * Retrieves the name of the currently assigned file
- * for XML output, if any exists.
- *
- * @return the name of the XML file, or NULL if none is configured
- *
- * @since 0.9.1
- */
-CK_DLL_EXP const char *CK_EXPORT srunner_xml_fname (SRunner * sr);
-
-/**
- * Set the suite runner to output the result in TAP format to the
- * given file.
- *
- * Note: TAP file setting is an initialize only operation -- it should
- * be done immediately after SRunner creation, and the TAP file can't be
- * changed after being set.
- *
- * This setting does not conflict with the other log output types;
- * all logging types can occur concurrently if configured.
- *
- * @param sr suite runner to log results of in TAP format
- * @param fname file name to output TAP results to
- *
- * @since 0.9.12
-*/
-CK_DLL_EXP void CK_EXPORT srunner_set_tap (SRunner * sr, const char *fname);
-
-/**
- * Checks if the suite runner is assigned a file for TAP output.
- *
- * @param sr suite runner to check
- *
- * @return 1 iff the suite runner currently is configured to output
- *         in TAP format; 0 otherwise
- *
- * @since 0.9.12
- */
-CK_DLL_EXP int CK_EXPORT srunner_has_tap (SRunner * sr);
-
-/**
- * Retrieves the name of the currently assigned file
- * for TAP output, if any exists.
- *
- * @return the name of the TAP file, or NULL if none is configured
- *
- * @since 0.9.12
- */
-CK_DLL_EXP const char *CK_EXPORT srunner_tap_fname (SRunner * sr);
-
-/**
- * Enum describing the current fork usage.
- */
-enum fork_status
-{
-  CK_FORK_GETENV,               /**< look in the environment for CK_FORK */
-  CK_FORK,                      /**< call fork to run tests */
-  CK_NOFORK                     /**< don't call fork */
-};
-
-/**
- * Retrieve the current fork status for the given suite runner
- *
- * @param sr suite runner to check fork status of
- *
- * @since 0.8.0
- */
-CK_DLL_EXP enum fork_status CK_EXPORT srunner_fork_status (SRunner * sr);
-
-/**
- * Set the fork status for a given suite runner.
- *
- * The default fork status is CK_FORK_GETENV, which will look
- * for the CK_FORK environment variable, which can be set to
- * "yes" or "no". If the environment variable is not present,
- * CK_FORK will be used if fork() is available on the system,
- * otherwise CK_NOFORK is used.
- *
- * If set to CK_FORK or CK_NOFORK, the environment variable
- * if defined is ignored.
- *
- * @param sr suite runner to assign the fork status to
- * @param fstat fork status to assign
- *
- * @since 0.8.0
- */
-CK_DLL_EXP void CK_EXPORT srunner_set_fork_status (SRunner * sr,
-    enum fork_status fstat);
-
-/**
- * Invoke fork() during a test and assign the child to the same
- * process group that the rest of the test case uses.
- *
- * One can invoke fork() directly during a test; however doing so
- * may not guarantee that any children processes are destroyed once
- * the test finishes. Once a test has completed, all processes in
- * the process group will be killed; using this wrapper will prevent
- * orphan processes.
- *
- * @return On success, the PID of the child process is returned in
- *          the parent, and 0 is returned in the child.  On failure,
- *          an error will be printed and exit() invoked.
- *
- * @since 0.9.3
- */
-CK_DLL_EXP pid_t CK_EXPORT check_fork (void);
-
-/**
- * Wait for the pid and exit.
- *
- * This is to be used in conjunction with check_fork(). When called,
- * will wait for the given process to terminate. If the process
- * exited without error, exit(EXIT_SUCCESS) is invoked; otherwise
- * exit(EXIT_FAILURE) is invoked.
- *
- * @param pid process to wait for, created by check_fork()
- *
- * @since 0.9.3
- */
-CK_DLL_EXP void CK_EXPORT
-check_waitpid_and_exit (pid_t pid)
-    CK_ATTRIBUTE_NORETURN;
-
-#ifdef __cplusplus
-CK_CPPEND
-#endif
-#endif /* CHECK_H */