gstreamer 2.2.5-x64-mingw32 → 3.0.0-x64-mingw32

data/vendor/local/include/speex/speex_preprocess.h

@@ -1,219 +0,0 @@
-/* Copyright (C) 2003 Epic Games
-   Written by Jean-Marc Valin */
-/**
- *  @file speex_preprocess.h
- *  @brief Speex preprocessor. The preprocess can do noise suppression, 
- * residual echo suppression (after using the echo canceller), automatic
- * gain control (AGC) and voice activity detection (VAD).
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef SPEEX_PREPROCESS_H
-#define SPEEX_PREPROCESS_H
-/** @defgroup SpeexPreprocessState SpeexPreprocessState: The Speex preprocessor
- *  This is the Speex preprocessor. The preprocess can do noise suppression, 
- * residual echo suppression (after using the echo canceller), automatic
- * gain control (AGC) and voice activity detection (VAD).
- *  @{
- */
-
-#include "speex/speex_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-   
-/** State of the preprocessor (one per channel). Should never be accessed directly. */
-struct SpeexPreprocessState_;
-
-/** State of the preprocessor (one per channel). Should never be accessed directly. */
-typedef struct SpeexPreprocessState_ SpeexPreprocessState;
-
-
-/** Creates a new preprocessing state. You MUST create one state per channel processed.
- * @param frame_size Number of samples to process at one time (should correspond to 10-20 ms). Must be
- * the same value as that used for the echo canceller for residual echo cancellation to work.
- * @param sampling_rate Sampling rate used for the input.
- * @return Newly created preprocessor state
-*/
-SpeexPreprocessState *speex_preprocess_state_init(int frame_size, int sampling_rate);
-
-/** Destroys a preprocessor state 
- * @param st Preprocessor state to destroy
-*/
-void speex_preprocess_state_destroy(SpeexPreprocessState *st);
-
-/** Preprocess a frame 
- * @param st Preprocessor state
- * @param x Audio sample vector (in and out). Must be same size as specified in speex_preprocess_state_init().
- * @return Bool value for voice activity (1 for speech, 0 for noise/silence), ONLY if VAD turned on.
-*/
-int speex_preprocess_run(SpeexPreprocessState *st, spx_int16_t *x);
-
-/** Preprocess a frame (deprecated, use speex_preprocess_run() instead)*/
-int speex_preprocess(SpeexPreprocessState *st, spx_int16_t *x, spx_int32_t *echo);
-
-/** Update preprocessor state, but do not compute the output
- * @param st Preprocessor state
- * @param x Audio sample vector (in only). Must be same size as specified in speex_preprocess_state_init().
-*/
-void speex_preprocess_estimate_update(SpeexPreprocessState *st, spx_int16_t *x);
-
-/** Used like the ioctl function to control the preprocessor parameters 
- * @param st Preprocessor state
- * @param request ioctl-type request (one of the SPEEX_PREPROCESS_* macros)
- * @param ptr Data exchanged to-from function
- * @return 0 if no error, -1 if request in unknown
-*/
-int speex_preprocess_ctl(SpeexPreprocessState *st, int request, void *ptr);
-
-
-
-/** Set preprocessor denoiser state */
-#define SPEEX_PREPROCESS_SET_DENOISE 0
-/** Get preprocessor denoiser state */
-#define SPEEX_PREPROCESS_GET_DENOISE 1
-
-/** Set preprocessor Automatic Gain Control state */
-#define SPEEX_PREPROCESS_SET_AGC 2
-/** Get preprocessor Automatic Gain Control state */
-#define SPEEX_PREPROCESS_GET_AGC 3
-
-/** Set preprocessor Voice Activity Detection state */
-#define SPEEX_PREPROCESS_SET_VAD 4
-/** Get preprocessor Voice Activity Detection state */
-#define SPEEX_PREPROCESS_GET_VAD 5
-
-/** Set preprocessor Automatic Gain Control level (float) */
-#define SPEEX_PREPROCESS_SET_AGC_LEVEL 6
-/** Get preprocessor Automatic Gain Control level (float) */
-#define SPEEX_PREPROCESS_GET_AGC_LEVEL 7
-
-/** Set preprocessor dereverb state */
-#define SPEEX_PREPROCESS_SET_DEREVERB 8
-/** Get preprocessor dereverb state */
-#define SPEEX_PREPROCESS_GET_DEREVERB 9
-
-/** Set preprocessor dereverb level */
-#define SPEEX_PREPROCESS_SET_DEREVERB_LEVEL 10
-/** Get preprocessor dereverb level */
-#define SPEEX_PREPROCESS_GET_DEREVERB_LEVEL 11
-
-/** Set preprocessor dereverb decay */
-#define SPEEX_PREPROCESS_SET_DEREVERB_DECAY 12
-/** Get preprocessor dereverb decay */
-#define SPEEX_PREPROCESS_GET_DEREVERB_DECAY 13
-
-/** Set probability required for the VAD to go from silence to voice */
-#define SPEEX_PREPROCESS_SET_PROB_START 14
-/** Get probability required for the VAD to go from silence to voice */
-#define SPEEX_PREPROCESS_GET_PROB_START 15
-
-/** Set probability required for the VAD to stay in the voice state (integer percent) */
-#define SPEEX_PREPROCESS_SET_PROB_CONTINUE 16
-/** Get probability required for the VAD to stay in the voice state (integer percent) */
-#define SPEEX_PREPROCESS_GET_PROB_CONTINUE 17
-
-/** Set maximum attenuation of the noise in dB (negative number) */
-#define SPEEX_PREPROCESS_SET_NOISE_SUPPRESS 18
-/** Get maximum attenuation of the noise in dB (negative number) */
-#define SPEEX_PREPROCESS_GET_NOISE_SUPPRESS 19
-
-/** Set maximum attenuation of the residual echo in dB (negative number) */
-#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS 20
-/** Get maximum attenuation of the residual echo in dB (negative number) */
-#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS 21
-
-/** Set maximum attenuation of the residual echo in dB when near end is active (negative number) */
-#define SPEEX_PREPROCESS_SET_ECHO_SUPPRESS_ACTIVE 22
-/** Get maximum attenuation of the residual echo in dB when near end is active (negative number) */
-#define SPEEX_PREPROCESS_GET_ECHO_SUPPRESS_ACTIVE 23
-
-/** Set the corresponding echo canceller state so that residual echo suppression can be performed (NULL for no residual echo suppression) */
-#define SPEEX_PREPROCESS_SET_ECHO_STATE 24
-/** Get the corresponding echo canceller state */
-#define SPEEX_PREPROCESS_GET_ECHO_STATE 25
-
-/** Set maximal gain increase in dB/second (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_INCREMENT 26
-
-/** Get maximal gain increase in dB/second (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_INCREMENT 27
-
-/** Set maximal gain decrease in dB/second (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_DECREMENT 28
-
-/** Get maximal gain decrease in dB/second (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_DECREMENT 29
-
-/** Set maximal gain in dB (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_MAX_GAIN 30
-
-/** Get maximal gain in dB (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_MAX_GAIN 31
-
-/*  Can't set loudness */
-/** Get loudness */
-#define SPEEX_PREPROCESS_GET_AGC_LOUDNESS 33
-
-/*  Can't set gain */
-/** Get current gain (int32 percent) */
-#define SPEEX_PREPROCESS_GET_AGC_GAIN 35
-
-/*  Can't set spectrum size */
-/** Get spectrum size for power spectrum (int32) */
-#define SPEEX_PREPROCESS_GET_PSD_SIZE 37
-
-/*  Can't set power spectrum */
-/** Get power spectrum (int32[] of squared values) */
-#define SPEEX_PREPROCESS_GET_PSD 39
-
-/*  Can't set noise size */
-/** Get spectrum size for noise estimate (int32)  */
-#define SPEEX_PREPROCESS_GET_NOISE_PSD_SIZE 41
-
-/*  Can't set noise estimate */
-/** Get noise estimate (int32[] of squared values) */
-#define SPEEX_PREPROCESS_GET_NOISE_PSD 43
-
-/* Can't set speech probability */
-/** Get speech probability in last frame (int32).  */
-#define SPEEX_PREPROCESS_GET_PROB 45
-
-/** Set preprocessor Automatic Gain Control level (int32) */
-#define SPEEX_PREPROCESS_SET_AGC_TARGET 46
-/** Get preprocessor Automatic Gain Control level (int32) */
-#define SPEEX_PREPROCESS_GET_AGC_TARGET 47
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @}*/
-#endif

data/vendor/local/include/speex/speex_resampler.h

@@ -1,340 +0,0 @@
-/* Copyright (C) 2007 Jean-Marc Valin
-      
-   File: speex_resampler.h
-   Resampling code
-      
-   The design goals of this code are:
-      - Very fast algorithm
-      - Low memory requirement
-      - Good *perceptual* quality (and not best SNR)
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are
-   met:
-
-   1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-
-   2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-   3. The name of the author may not be used to endorse or promote products
-   derived from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-   DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-   ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-*/
-
-
-#ifndef SPEEX_RESAMPLER_H
-#define SPEEX_RESAMPLER_H
-
-#ifdef OUTSIDE_SPEEX
-
-/********* WARNING: MENTAL SANITY ENDS HERE *************/
-
-/* If the resampler is defined outside of Speex, we change the symbol names so that 
-   there won't be any clash if linking with Speex later on. */
-
-/* #define RANDOM_PREFIX your software name here */
-#ifndef RANDOM_PREFIX
-#error "Please define RANDOM_PREFIX (above) to something specific to your project to prevent symbol name clashes"
-#endif
-
-#define CAT_PREFIX2(a,b) a ## b
-#define CAT_PREFIX(a,b) CAT_PREFIX2(a, b)
-      
-#define speex_resampler_init CAT_PREFIX(RANDOM_PREFIX,_resampler_init)
-#define speex_resampler_init_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_init_frac)
-#define speex_resampler_destroy CAT_PREFIX(RANDOM_PREFIX,_resampler_destroy)
-#define speex_resampler_process_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_float)
-#define speex_resampler_process_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_int)
-#define speex_resampler_process_interleaved_float CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_float)
-#define speex_resampler_process_interleaved_int CAT_PREFIX(RANDOM_PREFIX,_resampler_process_interleaved_int)
-#define speex_resampler_set_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate)
-#define speex_resampler_get_rate CAT_PREFIX(RANDOM_PREFIX,_resampler_get_rate)
-#define speex_resampler_set_rate_frac CAT_PREFIX(RANDOM_PREFIX,_resampler_set_rate_frac)
-#define speex_resampler_get_ratio CAT_PREFIX(RANDOM_PREFIX,_resampler_get_ratio)
-#define speex_resampler_set_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_set_quality)
-#define speex_resampler_get_quality CAT_PREFIX(RANDOM_PREFIX,_resampler_get_quality)
-#define speex_resampler_set_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_input_stride)
-#define speex_resampler_get_input_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_stride)
-#define speex_resampler_set_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_set_output_stride)
-#define speex_resampler_get_output_stride CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_stride)
-#define speex_resampler_get_input_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_input_latency)
-#define speex_resampler_get_output_latency CAT_PREFIX(RANDOM_PREFIX,_resampler_get_output_latency)
-#define speex_resampler_skip_zeros CAT_PREFIX(RANDOM_PREFIX,_resampler_skip_zeros)
-#define speex_resampler_reset_mem CAT_PREFIX(RANDOM_PREFIX,_resampler_reset_mem)
-#define speex_resampler_strerror CAT_PREFIX(RANDOM_PREFIX,_resampler_strerror)
-
-#define spx_int16_t short
-#define spx_int32_t int
-#define spx_uint16_t unsigned short
-#define spx_uint32_t unsigned int
-      
-#else /* OUTSIDE_SPEEX */
-
-#include "speex/speex_types.h"
-
-#endif /* OUTSIDE_SPEEX */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define SPEEX_RESAMPLER_QUALITY_MAX 10
-#define SPEEX_RESAMPLER_QUALITY_MIN 0
-#define SPEEX_RESAMPLER_QUALITY_DEFAULT 4
-#define SPEEX_RESAMPLER_QUALITY_VOIP 3
-#define SPEEX_RESAMPLER_QUALITY_DESKTOP 5
-
-enum {
-   RESAMPLER_ERR_SUCCESS         = 0,
-   RESAMPLER_ERR_ALLOC_FAILED    = 1,
-   RESAMPLER_ERR_BAD_STATE       = 2,
-   RESAMPLER_ERR_INVALID_ARG     = 3,
-   RESAMPLER_ERR_PTR_OVERLAP     = 4,
-   
-   RESAMPLER_ERR_MAX_ERROR
-};
-
-struct SpeexResamplerState_;
-typedef struct SpeexResamplerState_ SpeexResamplerState;
-
-/** Create a new resampler with integer input and output rates.
- * @param nb_channels Number of channels to be processed
- * @param in_rate Input sampling rate (integer number of Hz).
- * @param out_rate Output sampling rate (integer number of Hz).
- * @param quality Resampling quality between 0 and 10, where 0 has poor quality
- * and 10 has very high quality.
- * @return Newly created resampler state
- * @retval NULL Error: not enough memory
- */
-SpeexResamplerState *speex_resampler_init(spx_uint32_t nb_channels, 
-                                          spx_uint32_t in_rate, 
-                                          spx_uint32_t out_rate, 
-                                          int quality,
-                                          int *err);
-
-/** Create a new resampler with fractional input/output rates. The sampling 
- * rate ratio is an arbitrary rational number with both the numerator and 
- * denominator being 32-bit integers.
- * @param nb_channels Number of channels to be processed
- * @param ratio_num Numerator of the sampling rate ratio
- * @param ratio_den Denominator of the sampling rate ratio
- * @param in_rate Input sampling rate rounded to the nearest integer (in Hz).
- * @param out_rate Output sampling rate rounded to the nearest integer (in Hz).
- * @param quality Resampling quality between 0 and 10, where 0 has poor quality
- * and 10 has very high quality.
- * @return Newly created resampler state
- * @retval NULL Error: not enough memory
- */
-SpeexResamplerState *speex_resampler_init_frac(spx_uint32_t nb_channels, 
-                                               spx_uint32_t ratio_num, 
-                                               spx_uint32_t ratio_den, 
-                                               spx_uint32_t in_rate, 
-                                               spx_uint32_t out_rate, 
-                                               int quality,
-                                               int *err);
-
-/** Destroy a resampler state.
- * @param st Resampler state
- */
-void speex_resampler_destroy(SpeexResamplerState *st);
-
-/** Resample a float array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param channel_index Index of the channel to process for the multi-channel 
- * base (0 otherwise)
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the 
- * number of samples processed
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written
- */
-int speex_resampler_process_float(SpeexResamplerState *st, 
-                                   spx_uint32_t channel_index, 
-                                   const float *in, 
-                                   spx_uint32_t *in_len, 
-                                   float *out, 
-                                   spx_uint32_t *out_len);
-
-/** Resample an int array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param channel_index Index of the channel to process for the multi-channel 
- * base (0 otherwise)
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written
- */
-int speex_resampler_process_int(SpeexResamplerState *st, 
-                                 spx_uint32_t channel_index, 
-                                 const spx_int16_t *in, 
-                                 spx_uint32_t *in_len, 
-                                 spx_int16_t *out, 
-                                 spx_uint32_t *out_len);
-
-/** Resample an interleaved float array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed. This is all per-channel.
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written.
- * This is all per-channel.
- */
-int speex_resampler_process_interleaved_float(SpeexResamplerState *st, 
-                                               const float *in, 
-                                               spx_uint32_t *in_len, 
-                                               float *out, 
-                                               spx_uint32_t *out_len);
-
-/** Resample an interleaved int array. The input and output buffers must *not* overlap.
- * @param st Resampler state
- * @param in Input buffer
- * @param in_len Number of input samples in the input buffer. Returns the number
- * of samples processed. This is all per-channel.
- * @param out Output buffer
- * @param out_len Size of the output buffer. Returns the number of samples written.
- * This is all per-channel.
- */
-int speex_resampler_process_interleaved_int(SpeexResamplerState *st, 
-                                             const spx_int16_t *in, 
-                                             spx_uint32_t *in_len, 
-                                             spx_int16_t *out, 
-                                             spx_uint32_t *out_len);
-
-/** Set (change) the input/output sampling rates (integer value).
- * @param st Resampler state
- * @param in_rate Input sampling rate (integer number of Hz).
- * @param out_rate Output sampling rate (integer number of Hz).
- */
-int speex_resampler_set_rate(SpeexResamplerState *st, 
-                              spx_uint32_t in_rate, 
-                              spx_uint32_t out_rate);
-
-/** Get the current input/output sampling rates (integer value).
- * @param st Resampler state
- * @param in_rate Input sampling rate (integer number of Hz) copied.
- * @param out_rate Output sampling rate (integer number of Hz) copied.
- */
-void speex_resampler_get_rate(SpeexResamplerState *st, 
-                              spx_uint32_t *in_rate, 
-                              spx_uint32_t *out_rate);
-
-/** Set (change) the input/output sampling rates and resampling ratio 
- * (fractional values in Hz supported).
- * @param st Resampler state
- * @param ratio_num Numerator of the sampling rate ratio
- * @param ratio_den Denominator of the sampling rate ratio
- * @param in_rate Input sampling rate rounded to the nearest integer (in Hz).
- * @param out_rate Output sampling rate rounded to the nearest integer (in Hz).
- */
-int speex_resampler_set_rate_frac(SpeexResamplerState *st, 
-                                   spx_uint32_t ratio_num, 
-                                   spx_uint32_t ratio_den, 
-                                   spx_uint32_t in_rate, 
-                                   spx_uint32_t out_rate);
-
-/** Get the current resampling ratio. This will be reduced to the least
- * common denominator.
- * @param st Resampler state
- * @param ratio_num Numerator of the sampling rate ratio copied
- * @param ratio_den Denominator of the sampling rate ratio copied
- */
-void speex_resampler_get_ratio(SpeexResamplerState *st, 
-                               spx_uint32_t *ratio_num, 
-                               spx_uint32_t *ratio_den);
-
-/** Set (change) the conversion quality.
- * @param st Resampler state
- * @param quality Resampling quality between 0 and 10, where 0 has poor 
- * quality and 10 has very high quality.
- */
-int speex_resampler_set_quality(SpeexResamplerState *st, 
-                                 int quality);
-
-/** Get the conversion quality.
- * @param st Resampler state
- * @param quality Resampling quality between 0 and 10, where 0 has poor 
- * quality and 10 has very high quality.
- */
-void speex_resampler_get_quality(SpeexResamplerState *st, 
-                                 int *quality);
-
-/** Set (change) the input stride.
- * @param st Resampler state
- * @param stride Input stride
- */
-void speex_resampler_set_input_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t stride);
-
-/** Get the input stride.
- * @param st Resampler state
- * @param stride Input stride copied
- */
-void speex_resampler_get_input_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t *stride);
-
-/** Set (change) the output stride.
- * @param st Resampler state
- * @param stride Output stride
- */
-void speex_resampler_set_output_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t stride);
-
-/** Get the output stride.
- * @param st Resampler state copied
- * @param stride Output stride
- */
-void speex_resampler_get_output_stride(SpeexResamplerState *st, 
-                                      spx_uint32_t *stride);
-
-/** Get the latency in input samples introduced by the resampler.
- * @param st Resampler state
- */
-int speex_resampler_get_input_latency(SpeexResamplerState *st);
-
-/** Get the latency in output samples introduced by the resampler.
- * @param st Resampler state
- */
-int speex_resampler_get_output_latency(SpeexResamplerState *st);
-
-/** Make sure that the first samples to go out of the resamplers don't have 
- * leading zeros. This is only useful before starting to use a newly created 
- * resampler. It is recommended to use that when resampling an audio file, as
- * it will generate a file with the same length. For real-time processing,
- * it is probably easier not to use this call (so that the output duration
- * is the same for the first frame).
- * @param st Resampler state
- */
-int speex_resampler_skip_zeros(SpeexResamplerState *st);
-
-/** Reset a resampler so a new (unrelated) stream can be processed.
- * @param st Resampler state
- */
-int speex_resampler_reset_mem(SpeexResamplerState *st);
-
-/** Returns the English meaning for an error code
- * @param err Error code
- * @return English string
- */
-const char *speex_resampler_strerror(int err);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

data/vendor/local/include/speex/speex_stereo.h

@@ -1,91 +0,0 @@
-/* Copyright (C) 2002 Jean-Marc Valin*/
-/**
-   @file speex_stereo.h
-   @brief Describes the handling for intensity stereo
-*/
-/*
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-   
-   - Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-   
-   - Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-   
-   - Neither the name of the Xiph.org Foundation nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-   
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR
-   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#ifndef STEREO_H
-#define STEREO_H
-/** @defgroup SpeexStereoState SpeexStereoState: Handling Speex stereo files
- *  This describes the Speex intensity stereo encoding/decoding
- *  @{
- */
-
-#include "speex/speex_types.h"
-#include "speex/speex_bits.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** If you access any of these fields directly, I'll personally come and bite you */
-typedef struct SpeexStereoState {
-   float balance;      /**< Left/right balance info */
-   float e_ratio;      /**< Ratio of energies: E(left+right)/[E(left)+E(right)]  */
-   float smooth_left;  /**< Smoothed left channel gain */
-   float smooth_right; /**< Smoothed right channel gain */
-   float reserved1;    /**< Reserved for future use */
-   float reserved2;    /**< Reserved for future use */
-} SpeexStereoState;
-
-/** Deprecated. Use speex_stereo_state_init() instead. */
-#define SPEEX_STEREO_STATE_INIT {1,.5,1,1,0,0}
-
-/** Initialise/create a stereo stereo state */
-SpeexStereoState *speex_stereo_state_init();
-
-/** Reset/re-initialise an already allocated stereo state */
-void speex_stereo_state_reset(SpeexStereoState *stereo);
-
-/** Destroy a stereo stereo state */
-void speex_stereo_state_destroy(SpeexStereoState *stereo);
-
-/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
-void speex_encode_stereo(float *data, int frame_size, SpeexBits *bits);
-
-/** Transforms a stereo frame into a mono frame and stores intensity stereo info in 'bits' */
-void speex_encode_stereo_int(spx_int16_t *data, int frame_size, SpeexBits *bits);
-
-/** Transforms a mono frame into a stereo frame using intensity stereo info */
-void speex_decode_stereo(float *data, int frame_size, SpeexStereoState *stereo);
-
-/** Transforms a mono frame into a stereo frame using intensity stereo info */
-void speex_decode_stereo_int(spx_int16_t *data, int frame_size, SpeexStereoState *stereo);
-
-/** Callback handler for intensity stereo info */
-int speex_std_stereo_request_handler(SpeexBits *bits, void *state, void *data);
-
-#ifdef __cplusplus
-}
-#endif
-
-/** @} */
-#endif