gstreamer 2.0.2-x86-mingw32 → 2.0.3-x86-mingw32

data/vendor/local/share/man/man1/cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "30 December 2009"
+.TH CJPEG 1 "4 May 2012"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -49,6 +49,17 @@ By saying
 .BR \-grayscale ,
 you'll get a smaller JPEG file that takes less time to process.
 .TP
+.B \-rgb
+Create RGB JPEG file.
+Using this switch suppresses the conversion from RGB
+colorspace input to the default YCbCr JPEG colorspace.
+You can use this switch in combination with the
+.BI \-block " N"
+switch (see below) for lossless JPEG coding.
+See also the
+.B \-rgb1
+switch below.
+.TP
 .B \-optimize
 Perform optimization of entropy encoding parameters.  Without this, default
 encoding parameters are used.
@@ -64,7 +75,10 @@ Create progressive JPEG file (see below).
 .TP
 .BI \-scale " M/N"
 Scale the output image by a factor M/N.  Currently supported scale factors are
-8/N with all N from 1 to 16.
+M/N with all N from 1 to 16, where M is the destination DCT size, which is 8
+by default (see
+.BI \-block " N"
+switch below).
 .TP
 .B \-targa
 Input file is Targa format.  Targa files that contain an "identification"
@@ -152,6 +166,39 @@ about the same --- often a little smaller.
 .PP
 Switches for advanced users:
 .TP
+.B \-arithmetic
+Use arithmetic coding.
+.B Caution:
+arithmetic coded JPEG is not yet widely implemented, so many decoders will
+be unable to view an arithmetic coded JPEG file at all.
+.TP
+.BI \-block " N"
+Set DCT block size.  All N from 1 to 16 are possible.
+Default is 8 (baseline format).
+Larger values produce higher compression,
+smaller values produce higher quality
+(exact DCT stage possible with 1 or 2; with the default quality of 75 and
+default Luminance qtable the DCT+Quantization stage is lossless for N=1).
+.B Caution:
+An implementation of the JPEG SmartScale extension is required for this
+feature.  SmartScale enabled JPEG is not yet widely implemented, so many
+decoders will be unable to view a SmartScale extended JPEG file at all.
+.TP
+.B \-rgb1
+Create RGB JPEG file with reversible color transform.
+Works like the
+.B \-rgb
+switch (see above) and inserts a simple reversible color transform
+into the processing which significantly improves the compression.
+Use this switch in combination with the
+.BI \-block " N"
+switch (see above) for lossless JPEG coding.
+.B Caution:
+A decoder with inverse color transform support is required for
+this feature.  Reversible color transform support is not yet
+widely implemented, so many decoders will be unable to view
+a reversible color transformed JPEG file at all.
+.TP
 .B \-dct int
 Use integer DCT method (default).
 .TP
@@ -219,12 +266,6 @@ visibly blur the image, however.
 .PP
 Switches for wizards:
 .TP
-.B \-arithmetic
-Use arithmetic coding.
-.B Caution:
-arithmetic coded JPEG is not yet widely implemented, so many decoders will be
-unable to view an arithmetic coded JPEG file at all.
-.TP
 .B \-baseline
 Force baseline-compatible quantization tables to be generated.  This clamps
 quantization values to 8 bits even at low quality settings.  (This switch is

data/vendor/local/share/man/man1/flac.1

@@ -3,13 +3,13 @@
 .\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
 .\" Please send any bug reports, improvements, comments, patches, 
 .\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "FLAC" "1" "14 September 2007" "" ""
+.TH "FLAC" "1" "2013/04/30" "" ""
 
 .SH NAME
 flac \- Free Lossless Audio Codec
 .SH SYNOPSIS
 
-\fBflac\fR [ \fB\fIOPTIONS\fB\fR ] [ \fB\fIinfile.wav\fB\fR | \fB\fIinfile.aiff\fB\fR | \fB\fIinfile.raw\fB\fR | \fB\fIinfile.flac\fB\fR | \fB\fIinfile.oga\fB\fR | \fB\fIinfile.ogg\fB\fR | \fB-\fR\fI ...\fR ]
+\fBflac\fR [ \fB\fIOPTIONS\fB\fR ] [ \fB\fIinfile.wav\fB\fR | \fB\fIinfile.rf64\fB\fR | \fB\fIinfile.aiff\fB\fR | \fB\fIinfile.raw\fB\fR | \fB\fIinfile.flac\fB\fR | \fB\fIinfile.oga\fB\fR | \fB\fIinfile.ogg\fB\fR | \fB-\fR\fI ...\fR ]
 
 
 \fBflac\fR [ \fB-d\fR | \fB--decode\fR | \fB-t\fR | \fB--test\fR | \fB-a\fR | \fB--analyze\fR ] [ \fB\fIOPTIONS\fB\fR ] [ \fB\fIinfile.flac\fB\fR | \fB\fIinfile.oga\fB\fR | \fB\fIinfile.ogg\fB\fR | \fB-\fR\fI ...\fR ]
@@ -68,8 +68,11 @@ Prefix each output file name with the given string.  This can be useful for enco
 \fB--delete-input-file \fR
 Automatically delete the input file after a successful encode or decode.  If there was an error (including a verify error) the input file is left intact.
 .TP
+\fB--preserve-modtime \fR
+Output files have their timestamps/permissions set to match those of their inputs (this is default).  Use --no-preserve-modtime to make output files have the current time and default permissions.
+.TP
 \fB--keep-foreign-metadata \fR
-If encoding, save WAVE or AIFF non-audio chunks in FLAC metadata.  If decoding, restore any saved non-audio chunks from FLAC metadata when writing the decoded file.  Foreign metadata cannot be transcoded, e.g. WAVE chunks saved in a FLAC file cannot be restored when decoding to AIFF.  Input and output must be regular files (not stdin or stdout).
+If encoding, save WAVE, RF64, or AIFF non-audio chunks in FLAC metadata.  If decoding, restore any saved non-audio chunks from FLAC metadata when writing the decoded file.  Foreign metadata cannot be transcoded, e.g. WAVE chunks saved in a FLAC file cannot be restored when decoding to AIFF.  Input and output must be regular files (not stdin or stdout).
 .TP
 \fB--skip={\fI#\fB|\fImm:ss.ss\fB}\fR
 Skip over the first number of samples of the input.  This works for both encoding and decoding, but not testing.  The alternative form mm:ss.ss can be used to specify minutes, seconds, and fractions of a second.
@@ -98,6 +101,37 @@ Set the beginning and ending cuepoints to decode.  The optional first #.# is the
 .TP
 \fB-F, --decode-through-errors \fR
 By default flac stops decoding with an error and removes the partially decoded file if it encounters a bitstream error.  With -F, errors are still printed but flac will continue decoding to completion.  Note that errors may cause the decoded audio to be missing some samples or have silent sections.
+.TP
+\fB--apply-replaygain-which-is-not-lossless[=<specification>] \fR
+Applies ReplayGain values while decoding.
+
+WARNING: THIS IS NOT LOSSLESS.  DECODED AUDIO WILL NOT BE IDENTICAL TO THE ORIGINAL WITH THIS OPTION.
+
+The equals sign and <specification> is optional.  If omitted, the default is 0aLn1.
+
+The <specification> is a shorthand notation for describing how to apply ReplayGain.  All components are optional but order is important.  '[]' means 'optional'.  '|' means 'or'.  '{}' means required.  The format is:
+
+[<preamp>][a|t][l|L][n{0|1|2|3}]
+.RS
+.TP
+\fBpreamp\fR
+A floating point number in dB.  This is added to the existing gain value.
+.TP
+\fBa|t\fR
+Specify 'a' to use the album gain, or 't' to use the track gain.  If tags for the preferred kind (album/track) do not exist but tags for the other (track/album) do, those will be used instead.
+.TP
+\fBl|L\fR
+Specify 'l' to peak-limit the output, so that the ReplayGain peak value is full-scale.  Specify 'L' to use a 6dB hard limiter that kicks in when the signal approaches full-scale.
+.TP
+\fBn{0|1|2|3}\fR
+Specify the amount of noise shaping.  ReplayGain synthesis happens in floating point; the result is dithered before converting back to integer.  This quantization adds noise.  Noise shaping tries to move the noise where you won't hear it as much.  0 means no noise shaping, 1 means 'low', 2 means 'medium', 3 means 'high'.
+.RE
+
+For example, the default of 0aLn1 means 0dB preamp, use album gain, 6dB hard limit, low noise shaping.
+
+--apply-replaygain-which-is-not-lossless=3 means 3dB preamp, use album gain, no limiting, no noise shaping.
+
+flac uses the ReplayGain tags for the calculation.  If a stream does not have the required tags or they can't be parsed, decoding will continue with a warning, and no ReplayGain is applied to that stream.
 .SS "ENCODING OPTIONS"
 .TP
 \fB-V, --verify\fR
@@ -176,7 +210,12 @@ For example, "|image/jpeg|||../cover.jpg" will embed the JPEG file at ../cover.j
 The specification "4|-->|CD|320x300x24/173|http://blah.blah/backcover.tiff" will embed the given URL, with type 4 (back cover), description "CD", and a manually specified resolution of 320x300, 24 bits-per-pixel, and 173 colors.  The file at the URL will not be fetched; the URL itself is stored in the PICTURE metadata block.
 .TP
 \fB--sector-align\fR
-Align encoding of multiple CD format files on sector boundaries.  See the HTML documentation for more information.
+Align encoding of multiple CD format files on sector boundaries.  See the HTML documentation for more information.  This option is DEPRECATED and may not exist in future versions of flac.
+.TP
+\fB--ignore-chunk-sizes\fR
+When encoding to flac, ignore the file size headers in WAV and AIFF files to attempt to work around problems with over-sized or malformed files.
+
+WAV and AIFF files both have an unsigned 32 bit numbers in the file header which specifes the length of audio data. Since this number is unsigned 32 bits, that limits the size of a valid file to being just over 4 Gigabytes. Files larger than this are mal-formed, but should be read correctly using this option.
 .TP
 \fB-S {\fI#\fB|\fIX\fB|\fI#x\fB|\fI#s\fB}, --seekpoint={\fI#\fB|\fIX\fB|\fI#x\fB|\fI#s\fB}\fR
 Include a point or points in a SEEKTABLE.  Using #, a seek point at that sample number is added.  Using X, a placeholder point is added at the end of a the table.  Using #x, # evenly spaced seek points will be added, the first being at sample 0.  Using #s, a seekpoint will be added every # seconds (# does not have to be a whole number; it can be, for example, 9.5, meaning a seekpoint every 9.5 seconds).  You may use many -S options; the resulting SEEKTABLE will be the unique-ified union of all such values.  With no -S options, flac defaults to '-S 10s'.  Use --no-seektable for no SEEKTABLE.  Note: '-S #x' and '-S #s' will not work if the encoder can't determine the input size before starting.  Note: if you use '-S #' and # is >= samples in the input, there will be either no seek point entered (if the input size is determinable before encoding starts) or a placeholder point (if input size is not determinable).
@@ -280,23 +319,37 @@ Set sample rate (in Hz).
 Set the sign of samples (the default is signed).
 .TP
 \fB--input-size=\fI#\fB\fR
-Specify the size of the raw input in bytes.  If you are encoding raw samples from stdin, you must set this option in order to be able to use --skip, --until, --cue-sheet, or other options that need to know the size of the input beforehand.  If the size given is greater than what is found in the input stream, the encoder will complain about an unexpected end-of-file.  If the size given is less, samples will be truncated.
-.TP
-\fB--force-aiff-format\fR
-Force the decoder to output AIFF format.  This option is not needed if the output filename (as set by -o) ends with \fI\&.aiff\fR\&.  Also, this option has no effect when encoding since input AIFF is auto-detected.
+Specify the size of the raw input in bytes.  If you are encoding raw samples from stdin, you must set this option in order to be able to use --skip, --until, --cuesheet, or other options that need to know the size of the input beforehand.  If the size given is greater than what is found in the input stream, the encoder will complain about an unexpected end-of-file.  If the size given is less, samples will be truncated.
 .TP
 \fB--force-raw-format\fR
 Force input (when encoding) or output (when decoding) to be treated as raw samples (even if filename ends in \fI\&.wav\fR).
+.TP
+\fB--force-aiff-format\fR
+Force the decoder to output AIFF format.  This option is not needed if the output filename (as set by -o) ends with \fI\&.aif\fR or \fI\&.aiff\fR\&.  Also, this option has no effect when encoding since input AIFF is auto-detected.
+.TP
+\fB--force-rf64-format\fR
+Force the decoder to output RF64 format.  This option is not needed if the output filename (as set by -o) ends with \fI\&.rf64\fR\&.  Also, this option has no effect when encoding since input RF64 is auto-detected.
+.TP
+\fB--force-wave64-format\fR
+Force the decoder to output Wave64 format.  This option is not needed if the output filename (as set by -o) ends with \fI\&.w64\fR\&.  Also, this option has no effect when encoding since input Wave64 is auto-detected.
 .SS "NEGATIVE OPTIONS"
 .TP
 \fB--no-adaptive-mid-side\fR
 .TP
+\fB--no-cued-seekpoints\fR
+.TP
 \fB--no-decode-through-errors\fR
 .TP
 \fB--no-delete-input-file\fR
 .TP
+\fB--no-preserve-modtime\fR
+.TP
+\fB--no-keep-foreign-metadata\fR
+.TP
 \fB--no-exhaustive-model-search\fR
 .TP
+\fB--no-force\fR
+.TP
 \fB--no-lax\fR
 .TP
 \fB--no-mid-side\fR
@@ -305,7 +358,9 @@ Force input (when encoding) or output (when decoding) to be treated as raw sampl
 .TP
 \fB--no-padding\fR
 .TP
-\fB--no-qlp-coeff-precision-search\fR
+\fB--no-qlp-coeff-prec-search\fR
+.TP
+\fB--no-replay-gain\fR
 .TP
 \fB--no-residual-gnuplot\fR
 .TP
@@ -325,7 +380,7 @@ These flags can be used to invert the sense of the corresponding normal option.
 .PP
 metaflac(1).
 .PP
-The programs are documented fully by HTML format documentation, available in \fI/usr/share/doc/flac/html\fR on Debian GNU/Linux systems.
+The programs are documented fully by HTML format documentation, available in \fI/usr/share/doc/libflac-doc/html\fR on Debian GNU/Linux systems.
 .SH "AUTHOR"
 .PP
 This manual page was written by Matt Zimmerman <mdz@debian.org> for the Debian GNU/Linux system (but may be used by others).

data/vendor/local/share/man/man1/gst-launch-1.0.1

@@ -101,6 +101,16 @@ ANSI escape sequences.  Using this option causes \fIGStreamer\fP
 to print messages without color. Setting the \fBGST_DEBUG_NO_COLOR\fR
 environment variable will achieve the same thing.
 .TP 8
+.B  \-\-gst\-debug\-color\-mode
+\fIGStreamer\fP normally prints debugging messages so that the
+messages are color-coded when printed to a terminal that handles
+ANSI escape sequences (on *nix), or uses W32 console API to color the
+messages printed into a console (on W32). Using this option causes
+\fIGStreamer\fP to print messages without color ('off' or 'disable'),
+print messages with default colors ('on' or 'auto'), or print messages
+using ANSI escape sequences for coloring ('unix'). Setting the
+\fBGST_DEBUG_COLOR_MODE\fR environment variable will achieve the same thing.
+.TP 8
 .B  \-\-gst\-debug\-disable
 Disables debugging.
 .TP 8
@@ -406,20 +416,26 @@ samples and a sample rate between 32kHz and 64KHz.
 .SH "ENVIRONMENT VARIABLES"
 .TP
 \fBGST_DEBUG\fR
-Comma-separated list of debug categories and levels, e.g.
-GST_DEBUG=totem:4,typefind:5
+Comma-separated list of debug categories and levels (e.g.
+GST_DEBUG=totem:4,typefind:5). '*' is allowed as a wildcard as part of
+debug category names (e.g. GST_DEBUG=*sink:6,*audio*:6). Since 1.2.0 it is
+also possible to specify the log level by name (1=ERROR, 2=WARN, 3=FIXME,
+4=INFO, 5=DEBUG, 6=LOG, 7=TRACE, 9=MEMDUMP) (e.g. GST_DEBUG=*audio*:LOG)
 .TP
 \fBGST_DEBUG_NO_COLOR\fR
 When this environment variable is set, coloured debug output is disabled.
 .TP
 \fBGST_DEBUG_DUMP_DOT_DIR\fR
-When set to a filesystem path, store dot files of pipeline graphs there.
+When set to a filesystem path, store 'dot' files of pipeline graphs there.
+These can then later be converted into an image using the 'dot' utility from
+the graphviz set of tools, like this: dot foo.dot -Tsvg -o foo.svg (png or jpg
+are also possible as output format)
 .TP
 \fBGST_REGISTRY\fR
 Path of the plugin registry file. Default is
-~/.gstreamer-1.0/registry-CPU.bin where CPU is the machine/cpu type
-GStreamer was compiled for, e.g. 'i486', 'i686', 'x86-64', 'ppc', etc. (check
-the output of "uname -i" and "uname -m" for details).
+~/.cache/gstreamer-1.0/registry-CPU.bin where CPU is the
+machine/cpu type GStreamer was compiled for, e.g. 'i486', 'i686', 'x86-64',
+'ppc', etc. (check the output of "uname -i" and "uname -m" for details).
 .TP
 \fBGST_REGISTRY_UPDATE\fR
 Set to "no" to force GStreamer to assume that no plugins have changed,
@@ -437,6 +453,11 @@ Specifies a list of plugins that are always loaded by default.  If not set,
 this defaults to the system-installed path, and the plugins installed in the
 user's home directory
 .TP
+\fBGST_DEBUG_FILE\fR
+Set this variable to a file path to redirect all GStreamer debug
+messages to this file. If left unset, debug messages with be output
+unto the standard error.
+.TP
 \fBORC_CODE\fR
 Useful Orc environment variable. Set ORC_CODE=debug to enable debuggers
 such as gdb to create useful backtraces from Orc-generated code.  Set

data/vendor/local/share/man/man1/gst-play-1.0.1

@@ -0,0 +1,34 @@
+.TH "GStreamer" "1" "August 2013" "" ""
+.SH "NAME"
+gst\-play\-1.0 \- Simple command line playback testing tool
+.SH "SYNOPSIS"
+\fBgst\-play\-1.0\fR \fIFILE|DIRECTORY|URI [FILE2|DIRECTORY2|URI2]\fR
+.SH "DESCRIPTION"
+.LP
+\fIgst\-play\-1.0\fP is a command line tool that can be used to test
+basic playback using the playbin element. You can pass it individual files,
+URIs or whole directories (in which case it will recurse into sub-directories
+as well).
+
+.SH "OPTIONS"
+.l
+\fIgst\-play\-1.0\fP accepts the following options:
+.TP 8
+.B  \-\-help
+Print help synopsis and available command line options
+.TP 8
+.B  \-\-version
+Print version and exit
+.TP 8
+.B  \-\-audiosink=SOMESINK
+Use SOMESINK as audio sink instead of autoaudiosink.
+.TP 8
+.B  \-\-videosink=SOMESINK
+Use SOMESINK as video sink instead of autovideosink.
+.TP 8
+
+.SH "SEE ALSO"
+.BR gst\-inspect\-1.0 (1),
+.BR gst\-launch\-1.0 (1),
+.SH "AUTHOR"
+The GStreamer team at http://gstreamer.freedesktop.org/

data/vendor/local/share/man/man1/metaflac.1

@@ -3,7 +3,7 @@
 .\" <http://shell.ipoline.com/~elmert/comp/docbook2X/> 
 .\" Please send any bug reports, improvements, comments, patches, 
 .\" etc. to Steve Cheng <steve@ggi-project.org>.
-.TH "METAFLAC" "1" "14 September 2007" "" ""
+.TH "METAFLAC" "1" "2013/04/30" "" ""
 
 .SH NAME
 metaflac \- program to list, add, remove, or edit metadata in one or more FLAC files.
@@ -196,7 +196,8 @@ passes, it is always executed last, after all other operations
 have been completed and written to disk.  All FLAC files
 specified must have the same resolution, sample rate, and
 number of channels.  The sample rate must be one of 8, 11.025,
-12, 16, 22.05, 24, 32, 44.1, or 48 kHz.
+12, 16, 18.9, 22.05, 24, 28, 32, 37.8, 44.1, 48, 56, 64, 88.2,
+96, 112, 128, 144, 176.4, or 192kHz.
 .TP
 \fB--remove-replay-gain\fR
 Removes the ReplayGain tags.
@@ -238,8 +239,8 @@ The first block, the STREAMINFO block, is block 0.
 An optional comma-separated list of block types to be included
 or ignored with this option.  Use only one of --block-type or
 --except-block-type.  The valid block types are: STREAMINFO,
-PADDING, APPLICATION, SEEKTABLE, VORBIS_COMMENT.  You may
-narrow down the types of APPLICATION blocks displayed as
+PADDING, APPLICATION, SEEKTABLE, VORBIS_COMMENT, PICTURE.  You
+may narrow down the types of APPLICATION blocks displayed as
 follows:
 
 APPLICATION:abcd        The APPLICATION block(s) whose textual repre-

data/vendor/local/share/man/man1/sqlite3.1

@@ -0,0 +1,229 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SQLITE3 1 "Mon Apr 15 23:49:17 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+.B sqlite3 
+\- A command line interface for SQLite version 3
+
+.SH SYNOPSIS
+.B sqlite3
+.RI [ options ]
+.RI [ databasefile ]
+.RI [ SQL ]
+
+.SH SUMMARY
+.PP
+.B sqlite3
+is a terminal-based front-end to the SQLite library that can evaluate
+queries interactively and display the results in multiple formats.
+.B sqlite3
+can also be used within shell scripts and other applications to provide
+batch processing features.
+
+.SH DESCRIPTION
+To start a
+.B sqlite3
+interactive session, invoke the
+.B sqlite3
+command and optionally provide the name of a database file.  If the
+database file does not exist, it will be created.  If the database file
+does exist, it will be opened.
+
+For example, to create a new database file named "mydata.db", create
+a table named "memos" and insert a couple of records into that table:
+.sp
+$ 
+.B sqlite3 mydata.db
+.br
+SQLite version 3.1.3
+.br
+Enter ".help" for instructions
+.br
+sqlite>
+.B create table memos(text, priority INTEGER);
+.br
+sqlite>
+.B insert into memos values('deliver project description', 10);
+.br
+sqlite>
+.B insert into memos values('lunch with Christine', 100);
+.br
+sqlite>
+.B select * from memos;
+.br
+deliver project description|10
+.br
+lunch with Christine|100
+.br
+sqlite>
+.sp
+
+If no database name is supplied, the ATTACH sql command can be used
+to attach to existing or create new database files.  ATTACH can also
+be used to attach to multiple databases within the same interactive
+session.  This is useful for migrating data between databases,
+possibly changing the schema along the way.
+
+Optionally, a SQL statement or set of SQL statements can be supplied as
+a single argument.  Multiple statements should be separated by
+semi-colons.
+
+For example:
+.sp
+$ 
+.B sqlite3 -line mydata.db 'select * from memos where priority > 20;'
+.br
+    text = lunch with Christine
+.br
+priority = 100
+.br
+.sp
+
+.SS SQLITE META-COMMANDS
+.PP
+The interactive interpreter offers a set of meta-commands that can be
+used to control the output format, examine the currently attached
+database files, or perform administrative operations upon the
+attached databases (such as rebuilding indices).   Meta-commands are
+always prefixed with a dot (.).
+
+A list of available meta-commands can be viewed at any time by issuing
+the '.help' command.  For example:
+.sp
+sqlite>
+.B .help
+.nf
+.cc |
+.databases             List names and files of attached databases
+.dump ?TABLE? ...      Dump the database in an SQL text format
+.echo ON|OFF           Turn command echo on or off
+.exit                  Exit this program
+.explain ON|OFF        Turn output mode suitable for EXPLAIN on or off.
+.header(s) ON|OFF      Turn display of headers on or off
+.help                  Show this message
+.import FILE TABLE     Import data from FILE into TABLE
+.indices TABLE         Show names of all indices on TABLE
+.mode MODE ?TABLE?     Set output mode where MODE is one of:
+                         csv      Comma-separated values
+                         column   Left-aligned columns.  (See .width)
+                         html     HTML <table> code
+                         insert   SQL insert statements for TABLE
+                         line     One value per line
+                         list     Values delimited by .separator string
+                         tabs     Tab-separated values
+                         tcl      TCL list elements
+.nullvalue STRING      Print STRING in place of NULL values
+.output FILENAME       Send output to FILENAME
+.output stdout         Send output to the screen
+.prompt MAIN CONTINUE  Replace the standard prompts
+.quit                  Exit this program
+.read FILENAME         Execute SQL in FILENAME
+.schema ?TABLE?        Show the CREATE statements
+.separator STRING      Change separator used by output mode and .import
+.show                  Show the current values for various settings
+.tables ?PATTERN?      List names of tables matching a LIKE pattern
+.timeout MS            Try opening locked tables for MS milliseconds
+.width NUM NUM ...     Set column widths for "column" mode
+sqlite>
+|cc .
+.sp
+.fi
+
+.SH OPTIONS
+.B sqlite3
+has the following options:
+.TP
+.BI \-init\ file
+Read and execute commands from
+.I file
+, which can contain a mix of SQL statements and meta-commands.
+.TP
+.B \-echo
+Print commands before execution.
+.TP
+.B \-[no]header
+Turn headers on or off.
+.TP
+.B \-column
+Query results will be displayed in a table like form, using
+whitespace characters to separate the columns and align the
+output.
+.TP
+.B \-html
+Query results will be output as simple HTML tables.
+.TP
+.B \-line
+Query results will be displayed with one value per line, rows
+separated by a blank line.  Designed to be easily parsed by
+scripts or other programs
+.TP
+.B \-list
+Query results will be displayed with the separator (|, by default)
+character between each field value.  The default.
+.TP
+.BI \-separator\  separator
+Set output field separator.  Default is '|'.
+.TP
+.BI \-nullvalue\  string
+Set string used to represent NULL values.  Default is ''
+(empty string).
+.TP
+.B \-version
+Show SQLite version.
+.TP
+.B \-help
+Show help on options and exit.
+
+
+.SH INIT FILE
+.B sqlite3
+reads an initialization file to set the configuration of the
+interactive environment.  Throughout initialization, any previously
+specified setting can be overridden.  The sequence of initialization is
+as follows:
+
+o The default configuration is established as follows:
+
+.sp
+.nf
+.cc |
+mode            = LIST
+separator       = "|"
+main prompt     = "sqlite> "
+continue prompt = "   ...> "
+|cc .
+.sp
+.fi
+
+o If the file 
+.B ~/.sqliterc
+exists, it is processed first.
+can be found in the user's home directory, it is
+read and processed.  It should generally only contain meta-commands.
+
+o If the -init option is present, the specified file is processed.
+
+o All other command line options are processed.
+
+.SH SEE ALSO
+http://www.sqlite.org/
+.br
+The sqlite-doc package
+.SH AUTHOR
+This manual page was originally written by Andreas Rottmann
+<rotty@debian.org>, for the Debian GNU/Linux system (but may be used
+by others).   It was subsequently revised by Bill Bumgarner <bbum@mac.com>.