grpc 1.62.0 → 1.63.0

data/third_party/boringssl-with-bazel/src/crypto/des/internal.h

@@ -67,6 +67,9 @@ extern "C" {
 #endif
 
 
+// TODO(davidben): Ideally these macros would be replaced with
+// |CRYPTO_load_u32_le| and |CRYPTO_store_u32_le|.
+
 #define c2l(c, l)                         \
   do {                                    \
     (l) = ((uint32_t)(*((c)++)));         \
@@ -147,6 +150,27 @@ extern "C" {
   } while (0)
 
 
+// Correctly-typed versions of DES functions.
+//
+// See https://crbug.com/boringssl/683.
+
+void DES_set_key_ex(const uint8_t key[8], DES_key_schedule *schedule);
+void DES_ecb_encrypt_ex(const uint8_t in[8], uint8_t out[8],
+                        const DES_key_schedule *schedule, int is_encrypt);
+void DES_ncbc_encrypt_ex(const uint8_t *in, uint8_t *out, size_t len,
+                         const DES_key_schedule *schedule, uint8_t ivec[8],
+                         int enc);
+void DES_ecb3_encrypt_ex(const uint8_t input[8], uint8_t output[8],
+                         const DES_key_schedule *ks1,
+                         const DES_key_schedule *ks2,
+                         const DES_key_schedule *ks3, int enc);
+void DES_ede3_cbc_encrypt_ex(const uint8_t *in, uint8_t *out, size_t len,
+                             const DES_key_schedule *ks1,
+                             const DES_key_schedule *ks2,
+                             const DES_key_schedule *ks3, uint8_t ivec[8],
+                             int enc);
+
+
 // Private functions.
 //
 // These functions are only exported for use in |decrepit|.

data/third_party/boringssl-with-bazel/src/crypto/internal.h

@@ -243,10 +243,18 @@ typedef __uint128_t uint128_t;
 #define OPENSSL_SSE2
 #endif
 
-// For convenience in testing 64-bit generic code, we allow disabling SSE2
-// intrinsics via |OPENSSL_NO_SSE2_FOR_TESTING|. x86_64 always has SSE2
-// available, so we would otherwise need to test such code on a non-x86_64
-// platform.
+#if defined(OPENSSL_X86) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_SSE2)
+#error \
+    "x86 assembly requires SSE2. Build with -msse2 (recommended), or disable assembly optimizations with -DOPENSSL_NO_ASM."
+#endif
+
+// For convenience in testing the fallback code, we allow disabling SSE2
+// intrinsics via |OPENSSL_NO_SSE2_FOR_TESTING|. We require SSE2 on x86 and
+// x86_64, so we would otherwise need to test such code on a non-x86 platform.
+//
+// This does not remove the above requirement for SSE2 support with assembly
+// optimizations. It only disables some intrinsics-based optimizations so that
+// we can test the fallback code on CI.
 #if defined(OPENSSL_SSE2) && defined(OPENSSL_NO_SSE2_FOR_TESTING)
 #undef OPENSSL_SSE2
 #endif

data/third_party/boringssl-with-bazel/src/crypto/x509/internal.h

@@ -588,6 +588,10 @@ GENERAL_NAMES *v2i_GENERAL_NAMES(const X509V3_EXT_METHOD *method,
 // |X509_NAME| issue is resolved.
 int X509_check_akid(X509 *issuer, const AUTHORITY_KEYID *akid);
 
+int X509_is_valid_trust_id(int trust);
+
+int X509_PURPOSE_get_trust(const X509_PURPOSE *xp);
+
 
 #if defined(__cplusplus)
 }  // extern C

data/third_party/boringssl-with-bazel/src/crypto/x509/v3_purp.c

@@ -54,8 +54,6 @@
  * (eay@cryptsoft.com).  This product includes software written by Tim
  * Hudson (tjh@cryptsoft.com). */
 
-#include <assert.h>
-#include <limits.h>
 #include <string.h>
 
 #include <openssl/digest.h>
@@ -68,6 +66,14 @@
 #include "../internal.h"
 #include "internal.h"
 
+
+struct x509_purpose_st {
+  int purpose;
+  int trust;  // Default trust ID
+  int (*check_purpose)(const struct x509_purpose_st *, const X509 *, int);
+  const char *sname;
+} /* X509_PURPOSE */;
+
 #define V1_ROOT (EXFLAG_V1 | EXFLAG_SS)
 #define ku_reject(x, usage) \
   (((x)->ex_flags & EXFLAG_KUSAGE) && !((x)->ex_kusage & (usage)))
@@ -91,30 +97,30 @@ static int check_purpose_timestamp_sign(const X509_PURPOSE *xp, const X509 *x,
                                         int ca);
 static int no_check(const X509_PURPOSE *xp, const X509 *x, int ca);
 
+// X509_TRUST_NONE is not a valid |X509_TRUST_*| constant. It is used by
+// |X509_PURPOSE_ANY| to indicate that it has no corresponding trust type and
+// cannot be used with |X509_STORE_CTX_set_purpose|.
+#define X509_TRUST_NONE (-1)
+
 static const X509_PURPOSE xstandard[] = {
-    {X509_PURPOSE_SSL_CLIENT, X509_TRUST_SSL_CLIENT, 0,
-     check_purpose_ssl_client, (char *)"SSL client", (char *)"sslclient", NULL},
-    {X509_PURPOSE_SSL_SERVER, X509_TRUST_SSL_SERVER, 0,
-     check_purpose_ssl_server, (char *)"SSL server", (char *)"sslserver", NULL},
-    {X509_PURPOSE_NS_SSL_SERVER, X509_TRUST_SSL_SERVER, 0,
-     check_purpose_ns_ssl_server, (char *)"Netscape SSL server",
-     (char *)"nssslserver", NULL},
-    {X509_PURPOSE_SMIME_SIGN, X509_TRUST_EMAIL, 0, check_purpose_smime_sign,
-     (char *)"S/MIME signing", (char *)"smimesign", NULL},
-    {X509_PURPOSE_SMIME_ENCRYPT, X509_TRUST_EMAIL, 0,
-     check_purpose_smime_encrypt, (char *)"S/MIME encryption",
-     (char *)"smimeencrypt", NULL},
-    {X509_PURPOSE_CRL_SIGN, X509_TRUST_COMPAT, 0, check_purpose_crl_sign,
-     (char *)"CRL signing", (char *)"crlsign", NULL},
-    {X509_PURPOSE_ANY, X509_TRUST_DEFAULT, 0, no_check, (char *)"Any Purpose",
-     (char *)"any", NULL},
+    {X509_PURPOSE_SSL_CLIENT, X509_TRUST_SSL_CLIENT, check_purpose_ssl_client,
+     "sslclient"},
+    {X509_PURPOSE_SSL_SERVER, X509_TRUST_SSL_SERVER, check_purpose_ssl_server,
+     "sslserver"},
+    {X509_PURPOSE_NS_SSL_SERVER, X509_TRUST_SSL_SERVER,
+     check_purpose_ns_ssl_server, "nssslserver"},
+    {X509_PURPOSE_SMIME_SIGN, X509_TRUST_EMAIL, check_purpose_smime_sign,
+     "smimesign"},
+    {X509_PURPOSE_SMIME_ENCRYPT, X509_TRUST_EMAIL, check_purpose_smime_encrypt,
+     "smimeencrypt"},
+    {X509_PURPOSE_CRL_SIGN, X509_TRUST_COMPAT, check_purpose_crl_sign,
+     "crlsign"},
+    {X509_PURPOSE_ANY, X509_TRUST_NONE, no_check, "any"},
     // |X509_PURPOSE_OCSP_HELPER| performs no actual checks. OpenSSL's OCSP
     // implementation relied on the caller performing EKU and KU checks.
-    {X509_PURPOSE_OCSP_HELPER, X509_TRUST_COMPAT, 0, no_check,
-     (char *)"OCSP helper", (char *)"ocsphelper", NULL},
-    {X509_PURPOSE_TIMESTAMP_SIGN, X509_TRUST_TSA, 0,
-     check_purpose_timestamp_sign, (char *)"Time Stamp signing",
-     (char *)"timestampsign", NULL},
+    {X509_PURPOSE_OCSP_HELPER, X509_TRUST_COMPAT, no_check, "ocsphelper"},
+    {X509_PURPOSE_TIMESTAMP_SIGN, X509_TRUST_TSA, check_purpose_timestamp_sign,
+     "timestampsign"},
 };
 
 int X509_check_purpose(X509 *x, int id, int ca) {
@@ -127,8 +133,8 @@ int X509_check_purpose(X509 *x, int id, int ca) {
   if (id == -1) {
     return 1;
   }
-  int idx = X509_PURPOSE_get_by_id(id);
-  if (idx == -1) {
+  const X509_PURPOSE *pt = X509_PURPOSE_get0(id);
+  if (pt == NULL) {
     return 0;
   }
   // Historically, |check_purpose| implementations other than |X509_PURPOSE_ANY|
@@ -138,45 +144,22 @@ int X509_check_purpose(X509 *x, int id, int ca) {
   if (ca && id != X509_PURPOSE_ANY && !check_ca(x)) {
     return 0;
   }
-  const X509_PURPOSE *pt = X509_PURPOSE_get0(idx);
   return pt->check_purpose(pt, x, ca);
 }
 
-int X509_PURPOSE_set(int *p, int purpose) {
-  if (X509_PURPOSE_get_by_id(purpose) == -1) {
-    OPENSSL_PUT_ERROR(X509V3, X509V3_R_INVALID_PURPOSE);
-    return 0;
-  }
-  *p = purpose;
-  return 1;
-}
-
-int X509_PURPOSE_get_count(void) { return OPENSSL_ARRAY_SIZE(xstandard); }
-
-const X509_PURPOSE *X509_PURPOSE_get0(int idx) {
-  if (idx < 0 || (size_t)idx >= OPENSSL_ARRAY_SIZE(xstandard)) {
-    return NULL;
-  }
-  return xstandard + idx;
-}
-
-int X509_PURPOSE_get_by_sname(const char *sname) {
-  const X509_PURPOSE *xptmp;
-  for (int i = 0; i < X509_PURPOSE_get_count(); i++) {
-    xptmp = X509_PURPOSE_get0(i);
-    if (!strcmp(xptmp->sname, sname)) {
-      return i;
+const X509_PURPOSE *X509_PURPOSE_get0(int id) {
+  for (size_t i = 0; i < OPENSSL_ARRAY_SIZE(xstandard); i++) {
+    if (xstandard[i].purpose == id) {
+      return &xstandard[i];
     }
   }
-  return -1;
+  return NULL;
 }
 
-int X509_PURPOSE_get_by_id(int purpose) {
-  for (size_t i = 0; i <OPENSSL_ARRAY_SIZE(xstandard); i++) {
-    if (xstandard[i].purpose == purpose) {
-      static_assert(OPENSSL_ARRAY_SIZE(xstandard) <= INT_MAX,
-                    "indices must fit in int");
-      return (int)i;
+int X509_PURPOSE_get_by_sname(const char *sname) {
+  for (size_t i = 0; i < OPENSSL_ARRAY_SIZE(xstandard); i++) {
+    if (strcmp(xstandard[i].sname, sname) == 0) {
+      return xstandard[i].purpose;
     }
   }
   return -1;
@@ -184,10 +167,6 @@ int X509_PURPOSE_get_by_id(int purpose) {
 
 int X509_PURPOSE_get_id(const X509_PURPOSE *xp) { return xp->purpose; }
 
-char *X509_PURPOSE_get0_name(const X509_PURPOSE *xp) { return xp->name; }
-
-char *X509_PURPOSE_get0_sname(const X509_PURPOSE *xp) { return xp->sname; }
-
 int X509_PURPOSE_get_trust(const X509_PURPOSE *xp) { return xp->trust; }
 
 int X509_supported_extension(const X509_EXTENSION *ex) {

data/third_party/boringssl-with-bazel/src/crypto/x509/x509_lu.c

@@ -230,13 +230,11 @@ int X509_STORE_CTX_get_by_subject(X509_STORE_CTX *vs, int type, X509_NAME *name,
     }
   }
 
-  // if (ret->data.ptr != NULL) X509_OBJECT_free_contents(ret);
-
+  // TODO(crbug.com/boringssl/685): This should call
+  // |X509_OBJECT_free_contents|.
   ret->type = tmp->type;
-  ret->data.ptr = tmp->data.ptr;
-
+  ret->data = tmp->data;
   X509_OBJECT_up_ref_count(ret);
-
   return 1;
 }
 
@@ -391,8 +389,27 @@ static X509_OBJECT *X509_OBJECT_retrieve_by_subject(STACK_OF(X509_OBJECT) *h,
   return sk_X509_OBJECT_value(h, idx);
 }
 
-STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *st) {
-  return st->objs;
+static X509_OBJECT *x509_object_dup(const X509_OBJECT *obj) {
+  X509_OBJECT *ret = X509_OBJECT_new();
+  if (ret == NULL) {
+    return NULL;
+  }
+  ret->type = obj->type;
+  ret->data = obj->data;
+  X509_OBJECT_up_ref_count(ret);
+  return ret;
+}
+
+STACK_OF(X509_OBJECT) *X509_STORE_get1_objects(X509_STORE *store) {
+  CRYPTO_MUTEX_lock_read(&store->objs_lock);
+  STACK_OF(X509_OBJECT) *ret =
+      sk_X509_OBJECT_deep_copy(store->objs, x509_object_dup, X509_OBJECT_free);
+  CRYPTO_MUTEX_unlock_read(&store->objs_lock);
+  return ret;
+}
+
+STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *store) {
+  return store->objs;
 }
 
 STACK_OF(X509) *X509_STORE_CTX_get1_certs(X509_STORE_CTX *ctx, X509_NAME *nm) {

data/third_party/boringssl-with-bazel/src/crypto/x509/x509_trs.c

@@ -54,9 +54,6 @@
  * (eay@cryptsoft.com).  This product includes software written by Tim
  * Hudson (tjh@cryptsoft.com). */
 
-#include <assert.h>
-#include <limits.h>
-
 #include <openssl/err.h>
 #include <openssl/mem.h>
 #include <openssl/obj.h>
@@ -66,23 +63,35 @@
 #include "internal.h"
 
 
+typedef struct x509_trust_st X509_TRUST;
+
+struct x509_trust_st {
+  int trust;
+  int (*check_trust)(const X509_TRUST *, X509 *, int);
+  int nid;
+} /* X509_TRUST */;
+
 static int trust_1oidany(const X509_TRUST *trust, X509 *x, int flags);
 static int trust_compat(const X509_TRUST *trust, X509 *x, int flags);
 
 static int obj_trust(int id, X509 *x, int flags);
 
 static const X509_TRUST trstandard[] = {
-    {X509_TRUST_COMPAT, 0, trust_compat, (char *)"compatible", 0, NULL},
-    {X509_TRUST_SSL_CLIENT, 0, trust_1oidany, (char *)"SSL Client",
-     NID_client_auth, NULL},
-    {X509_TRUST_SSL_SERVER, 0, trust_1oidany, (char *)"SSL Server",
-     NID_server_auth, NULL},
-    {X509_TRUST_EMAIL, 0, trust_1oidany, (char *)"S/MIME email",
-     NID_email_protect, NULL},
-    {X509_TRUST_OBJECT_SIGN, 0, trust_1oidany, (char *)"Object Signer",
-     NID_code_sign, NULL},
-    {X509_TRUST_TSA, 0, trust_1oidany, (char *)"TSA server", NID_time_stamp,
-     NULL}};
+    {X509_TRUST_COMPAT, trust_compat, 0},
+    {X509_TRUST_SSL_CLIENT, trust_1oidany, NID_client_auth},
+    {X509_TRUST_SSL_SERVER, trust_1oidany, NID_server_auth},
+    {X509_TRUST_EMAIL, trust_1oidany, NID_email_protect},
+    {X509_TRUST_OBJECT_SIGN, trust_1oidany, NID_code_sign},
+    {X509_TRUST_TSA, trust_1oidany, NID_time_stamp}};
+
+static const X509_TRUST *X509_TRUST_get0(int id) {
+  for (size_t i = 0; i < OPENSSL_ARRAY_SIZE(trstandard); i++) {
+    if (trstandard[i].trust == id) {
+      return &trstandard[i];
+    }
+  }
+  return NULL;
+}
 
 int X509_check_trust(X509 *x, int id, int flags) {
   if (id == -1) {
@@ -96,52 +105,23 @@ int X509_check_trust(X509 *x, int id, int flags) {
     }
     return trust_compat(NULL, x, 0);
   }
-  int idx = X509_TRUST_get_by_id(id);
-  if (idx == -1) {
+  const X509_TRUST *pt = X509_TRUST_get0(id);
+  if (pt == NULL) {
+    // Unknown trust IDs are silently reintrepreted as NIDs. This is unreachable
+    // from the certificate verifier itself, but wpa_supplicant relies on it.
+    // Note this relies on commonly-used NIDs and trust IDs not colliding.
     return obj_trust(id, x, flags);
   }
-  const X509_TRUST *pt = X509_TRUST_get0(idx);
   return pt->check_trust(pt, x, flags);
 }
 
-int X509_TRUST_get_count(void) { return OPENSSL_ARRAY_SIZE(trstandard); }
-
-const X509_TRUST *X509_TRUST_get0(int idx) {
-  if (idx < 0 || (size_t)idx >= OPENSSL_ARRAY_SIZE(trstandard)) {
-    return NULL;
-  }
-  return trstandard + idx;
-}
-
-int X509_TRUST_get_by_id(int id) {
-  for (size_t i = 0; i < OPENSSL_ARRAY_SIZE(trstandard); i++) {
-    if (trstandard[i].trust == id) {
-      static_assert(OPENSSL_ARRAY_SIZE(trstandard) <= INT_MAX,
-                    "indices must fit in int");
-      return (int)i;
-    }
-  }
-  return -1;
+int X509_is_valid_trust_id(int trust) {
+  return X509_TRUST_get0(trust) != NULL;
 }
 
-int X509_TRUST_set(int *t, int trust) {
-  if (X509_TRUST_get_by_id(trust) == -1) {
-    OPENSSL_PUT_ERROR(X509, X509_R_INVALID_TRUST);
-    return 0;
-  }
-  *t = trust;
-  return 1;
-}
-
-int X509_TRUST_get_flags(const X509_TRUST *xp) { return xp->flags; }
-
-char *X509_TRUST_get0_name(const X509_TRUST *xp) { return xp->name; }
-
-int X509_TRUST_get_trust(const X509_TRUST *xp) { return xp->trust; }
-
 static int trust_1oidany(const X509_TRUST *trust, X509 *x, int flags) {
   if (x->aux && (x->aux->trust || x->aux->reject)) {
-    return obj_trust(trust->arg1, x, flags);
+    return obj_trust(trust->nid, x, flags);
   }
   // we don't have any trust settings: for compatibility we return trusted
   // if it is self signed
@@ -160,24 +140,21 @@ static int trust_compat(const X509_TRUST *trust, X509 *x, int flags) {
 }
 
 static int obj_trust(int id, X509 *x, int flags) {
-  ASN1_OBJECT *obj;
-  size_t i;
-  X509_CERT_AUX *ax;
-  ax = x->aux;
+  X509_CERT_AUX *ax = x->aux;
   if (!ax) {
     return X509_TRUST_UNTRUSTED;
   }
   if (ax->reject) {
-    for (i = 0; i < sk_ASN1_OBJECT_num(ax->reject); i++) {
-      obj = sk_ASN1_OBJECT_value(ax->reject, i);
+    for (size_t i = 0; i < sk_ASN1_OBJECT_num(ax->reject); i++) {
+      const ASN1_OBJECT *obj = sk_ASN1_OBJECT_value(ax->reject, i);
       if (OBJ_obj2nid(obj) == id) {
         return X509_TRUST_REJECTED;
       }
     }
   }
   if (ax->trust) {
-    for (i = 0; i < sk_ASN1_OBJECT_num(ax->trust); i++) {
-      obj = sk_ASN1_OBJECT_value(ax->trust, i);
+    for (size_t i = 0; i < sk_ASN1_OBJECT_num(ax->trust); i++) {
+      const ASN1_OBJECT *obj = sk_ASN1_OBJECT_value(ax->trust, i);
       if (OBJ_obj2nid(obj) == id) {
         return X509_TRUST_TRUSTED;
       }

data/third_party/boringssl-with-bazel/src/crypto/x509/x509_vfy.c

@@ -1485,13 +1485,13 @@ int X509_STORE_CTX_set_purpose(X509_STORE_CTX *ctx, int purpose) {
     return 1;
   }
 
-  int idx = X509_PURPOSE_get_by_id(purpose);
-  if (idx == -1) {
+  const X509_PURPOSE *pobj = X509_PURPOSE_get0(purpose);
+  if (pobj == NULL) {
     OPENSSL_PUT_ERROR(X509, X509_R_UNKNOWN_PURPOSE_ID);
     return 0;
   }
 
-  int trust = X509_PURPOSE_get_trust(X509_PURPOSE_get0(idx));
+  int trust = X509_PURPOSE_get_trust(pobj);
   if (!X509_STORE_CTX_set_trust(ctx, trust)) {
     return 0;
   }
@@ -1508,7 +1508,7 @@ int X509_STORE_CTX_set_trust(X509_STORE_CTX *ctx, int trust) {
     return 1;
   }
 
-  if (X509_TRUST_get_by_id(trust) == -1) {
+  if (!X509_is_valid_trust_id(trust)) {
     OPENSSL_PUT_ERROR(X509, X509_R_UNKNOWN_TRUST_ID);
     return 0;
   }

data/third_party/boringssl-with-bazel/src/crypto/x509/x509_vpm.c

@@ -269,11 +269,22 @@ unsigned long X509_VERIFY_PARAM_get_flags(const X509_VERIFY_PARAM *param) {
 }
 
 int X509_VERIFY_PARAM_set_purpose(X509_VERIFY_PARAM *param, int purpose) {
-  return X509_PURPOSE_set(&param->purpose, purpose);
+  if (X509_PURPOSE_get0(purpose) == NULL) {
+    OPENSSL_PUT_ERROR(X509V3, X509V3_R_INVALID_PURPOSE);
+    return 0;
+  }
+  param->purpose = purpose;
+  return 1;
 }
 
 int X509_VERIFY_PARAM_set_trust(X509_VERIFY_PARAM *param, int trust) {
-  return X509_TRUST_set(&param->trust, trust);
+  if (!X509_is_valid_trust_id(trust)) {
+    OPENSSL_PUT_ERROR(X509, X509_R_UNKNOWN_TRUST_ID);
+    return 0;
+  }
+
+  param->trust = trust;
+  return 1;
 }
 
 void X509_VERIFY_PARAM_set_depth(X509_VERIFY_PARAM *param, int depth) {

data/third_party/boringssl-with-bazel/src/include/openssl/asn1.h

@@ -1636,18 +1636,18 @@ OPENSSL_EXPORT int ASN1_STRING_print(BIO *out, const ASN1_STRING *str);
 
 // ASN1_STRFLGS_ESC_2253 causes characters to be escaped as in RFC 2253, section
 // 2.4.
-#define ASN1_STRFLGS_ESC_2253 1
+#define ASN1_STRFLGS_ESC_2253 1ul
 
 // ASN1_STRFLGS_ESC_CTRL causes all control characters to be escaped.
-#define ASN1_STRFLGS_ESC_CTRL 2
+#define ASN1_STRFLGS_ESC_CTRL 2ul
 
 // ASN1_STRFLGS_ESC_MSB causes all characters above 127 to be escaped.
-#define ASN1_STRFLGS_ESC_MSB 4
+#define ASN1_STRFLGS_ESC_MSB 4ul
 
 // ASN1_STRFLGS_ESC_QUOTE causes the string to be surrounded by quotes, rather
 // than using backslashes, when characters are escaped. Fewer characters will
 // require escapes in this case.
-#define ASN1_STRFLGS_ESC_QUOTE 8
+#define ASN1_STRFLGS_ESC_QUOTE 8ul
 
 // ASN1_STRFLGS_UTF8_CONVERT causes the string to be encoded as UTF-8, with each
 // byte in the UTF-8 encoding treated as an individual character for purposes of
@@ -1655,29 +1655,29 @@ OPENSSL_EXPORT int ASN1_STRING_print(BIO *out, const ASN1_STRING *str);
 // as a character, with wide characters escaped as "\Uxxxx" or "\Wxxxxxxxx".
 // Note this can be ambiguous if |ASN1_STRFLGS_ESC_*| are all unset. In that
 // case, backslashes are not escaped, but wide characters are.
-#define ASN1_STRFLGS_UTF8_CONVERT 0x10
+#define ASN1_STRFLGS_UTF8_CONVERT 0x10ul
 
 // ASN1_STRFLGS_IGNORE_TYPE causes the string type to be ignored. The
 // |ASN1_STRING| in-memory representation will be printed directly.
-#define ASN1_STRFLGS_IGNORE_TYPE 0x20
+#define ASN1_STRFLGS_IGNORE_TYPE 0x20ul
 
 // ASN1_STRFLGS_SHOW_TYPE causes the string type to be included in the output.
-#define ASN1_STRFLGS_SHOW_TYPE 0x40
+#define ASN1_STRFLGS_SHOW_TYPE 0x40ul
 
 // ASN1_STRFLGS_DUMP_ALL causes all strings to be printed as a hexdump, using
 // RFC 2253 hexstring notation, such as "#0123456789ABCDEF".
-#define ASN1_STRFLGS_DUMP_ALL 0x80
+#define ASN1_STRFLGS_DUMP_ALL 0x80ul
 
 // ASN1_STRFLGS_DUMP_UNKNOWN behaves like |ASN1_STRFLGS_DUMP_ALL| but only
 // applies to values of unknown type. If unset, unknown values will print
 // their contents as single-byte characters with escape sequences.
-#define ASN1_STRFLGS_DUMP_UNKNOWN 0x100
+#define ASN1_STRFLGS_DUMP_UNKNOWN 0x100ul
 
 // ASN1_STRFLGS_DUMP_DER causes hexdumped strings (as determined by
 // |ASN1_STRFLGS_DUMP_ALL| or |ASN1_STRFLGS_DUMP_UNKNOWN|) to print the entire
 // DER element as in RFC 2253, rather than only the contents of the
 // |ASN1_STRING|.
-#define ASN1_STRFLGS_DUMP_DER 0x200
+#define ASN1_STRFLGS_DUMP_DER 0x200ul
 
 // ASN1_STRFLGS_RFC2253 causes the string to be escaped as in RFC 2253,
 // additionally escaping control characters.

data/third_party/boringssl-with-bazel/src/include/openssl/base.h

@@ -109,7 +109,7 @@ extern "C" {
 // A consumer may use this symbol in the preprocessor to temporarily build
 // against multiple revisions of BoringSSL at the same time. It is not
 // recommended to do so for longer than is necessary.
-#define BORINGSSL_API_VERSION 29
+#define BORINGSSL_API_VERSION 30
 
 #if defined(BORINGSSL_SHARED_LIBRARY)
 
@@ -378,11 +378,11 @@ typedef struct x509_attributes_st X509_ATTRIBUTE;
 typedef struct x509_lookup_st X509_LOOKUP;
 typedef struct x509_lookup_method_st X509_LOOKUP_METHOD;
 typedef struct x509_object_st X509_OBJECT;
+typedef struct x509_purpose_st X509_PURPOSE;
 typedef struct x509_revoked_st X509_REVOKED;
 typedef struct x509_st X509;
 typedef struct x509_store_ctx_st X509_STORE_CTX;
 typedef struct x509_store_st X509_STORE;
-typedef struct x509_trust_st X509_TRUST;
 
 typedef void *OPENSSL_BLOCK;
 

data/third_party/boringssl-with-bazel/src/include/openssl/bio.h

@@ -269,11 +269,11 @@ OPENSSL_EXPORT int BIO_set_close(BIO *bio, int close_flag);
 
 // BIO_number_read returns the number of bytes that have been read from
 // |bio|.
-OPENSSL_EXPORT size_t BIO_number_read(const BIO *bio);
+OPENSSL_EXPORT uint64_t BIO_number_read(const BIO *bio);
 
 // BIO_number_written returns the number of bytes that have been written to
 // |bio|.
-OPENSSL_EXPORT size_t BIO_number_written(const BIO *bio);
+OPENSSL_EXPORT uint64_t BIO_number_written(const BIO *bio);
 
 
 // Managing chains of BIOs.
@@ -894,7 +894,7 @@ struct bio_st {
   // next_bio points to the next |BIO| in a chain. This |BIO| owns a reference
   // to |next_bio|.
   BIO *next_bio;  // used by filter BIOs
-  size_t num_read, num_write;
+  uint64_t num_read, num_write;
 };
 
 #define BIO_C_SET_CONNECT 100

data/third_party/boringssl-with-bazel/src/include/openssl/pki/certificate.h

@@ -0,0 +1,83 @@
+/* Copyright (c) 2023, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#if !defined(OPENSSL_HEADER_BSSL_PKI_CERTIFICATE_H_) && defined(__cplusplus)
+#define OPENSSL_HEADER_BSSL_PKI_CERTIFICATE_H_
+
+#include <memory>
+#include <string>
+#include <string_view>
+
+#include <openssl/base.h>
+#include <openssl/span.h>
+
+namespace bssl {
+
+struct CertificateInternals;
+
+// Certificate represents a parsed X.509 certificate. It includes accessors for
+// the various things that one might want to extract from a certificate,
+class OPENSSL_EXPORT Certificate {
+ public:
+  Certificate(Certificate&& other);
+  Certificate(const Certificate& other) = delete;
+  ~Certificate();
+  Certificate& operator=(const Certificate& other) = delete;
+
+  // FromDER returns a certificate from an DER-encoded X.509 object in |der|.
+  // In the event of a failure, it will return no value, and |out_diagnostic|
+  // may be set to a string of human readable debugging information if
+  // information abou the failure is available.
+  static std::unique_ptr<Certificate> FromDER(
+      bssl::Span<const uint8_t> der, std::string *out_diagnostic);
+
+  // FromPEM returns a certificate from the first CERTIFICATE PEM block in
+  // |pem|. In the event of a failure, it will return no value, and
+  // |out_diagnostic| may be set to a string of human readable debugging
+  // informtion if informaiton about the failuew is available.
+  static std::unique_ptr<Certificate> FromPEM(
+      std::string_view pem, std::string *out_diagnostic);
+
+  // IsSelfIssued returns true if the certificate is "self-issued" per RFC 5280
+  // section 6.1. I.e. that the subject and issuer names are equal after
+  // canonicalization (and no other checks).
+  //
+  // Other contexts may have a different notion such as "self signed" which
+  // may or may not be this, and may check other properties of the certificate.
+  bool IsSelfIssued() const;
+
+  // Validity specifies the temporal validity of a cerificate, expressed in
+  // POSIX time values of seconds since the POSIX epoch. The certificate is
+  // valid at POSIX time t in second granularity, where not_before <= t <=
+  // not_after.
+  struct Validity {
+    int64_t not_before;
+    int64_t not_after;
+  };
+
+  Validity GetValidity() const;
+
+  // The binary, big-endian, DER representation of the certificate serial
+  // number. It may include a leading 00 byte.
+  bssl::Span<const uint8_t> GetSerialNumber() const;
+
+ private:
+  explicit Certificate(std::unique_ptr<CertificateInternals> internals);
+
+  std::unique_ptr<CertificateInternals> internals_;
+};
+
+}  // namespace bssl
+
+#endif  // OPENSSL_HEADER_BSSL_PKI_CERTIFICATE_H_ && __cplusplus