grpc 1.61.0.pre2 → 1.62.0.pre1

data/third_party/boringssl-with-bazel/src/include/openssl/ssl.h

@@ -1461,19 +1461,19 @@ OPENSSL_EXPORT size_t SSL_get_all_standard_cipher_names(const char **out,
 //
 // Available opcodes are:
 //
-//   The empty opcode enables and appends all matching disabled ciphers to the
+// - The empty opcode enables and appends all matching disabled ciphers to the
 //   end of the enabled list. The newly appended ciphers are ordered relative to
 //   each other matching their order in the disabled list.
 //
-//   |-| disables all matching enabled ciphers and prepends them to the disabled
+// - |-| disables all matching enabled ciphers and prepends them to the disabled
 //   list, with relative order from the enabled list preserved. This means the
 //   most recently disabled ciphers get highest preference relative to other
 //   disabled ciphers if re-enabled.
 //
-//   |+| moves all matching enabled ciphers to the end of the enabled list, with
+// - |+| moves all matching enabled ciphers to the end of the enabled list, with
 //   relative order preserved.
 //
-//   |!| deletes all matching ciphers, enabled or not, from either list. Deleted
+// - |!| deletes all matching ciphers, enabled or not, from either list. Deleted
 //   ciphers will not matched by future operations.
 //
 // A selector may be a specific cipher (using either the standard or OpenSSL
@@ -1483,36 +1483,36 @@ OPENSSL_EXPORT size_t SSL_get_all_standard_cipher_names(const char **out,
 //
 // Available cipher rules are:
 //
-//   |ALL| matches all ciphers, except for deprecated ciphers which must be
+// - |ALL| matches all ciphers, except for deprecated ciphers which must be
 //   named explicitly.
 //
-//   |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE,
+// - |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE,
 //   ECDHE, and plain PSK key exchanges, respectively. Note that ECDHE_PSK is
 //   matched by |kECDHE| and not |kPSK|.
 //
-//   |aRSA|, |aECDSA|, and |aPSK| match ciphers authenticated by RSA, ECDSA, and
+// - |aRSA|, |aECDSA|, and |aPSK| match ciphers authenticated by RSA, ECDSA, and
 //   a pre-shared key, respectively.
 //
-//   |RSA|, |DHE|, |ECDHE|, |PSK|, |ECDSA|, and |PSK| are aliases for the
+// - |RSA|, |DHE|, |ECDHE|, |PSK|, |ECDSA|, and |PSK| are aliases for the
 //   corresponding |k*| or |a*| cipher rule. |RSA| is an alias for |kRSA|, not
 //   |aRSA|.
 //
-//   |3DES|, |AES128|, |AES256|, |AES|, |AESGCM|, |CHACHA20| match ciphers
+// - |3DES|, |AES128|, |AES256|, |AES|, |AESGCM|, |CHACHA20| match ciphers
 //   whose bulk cipher use the corresponding encryption scheme. Note that
 //   |AES|, |AES128|, and |AES256| match both CBC and GCM ciphers.
 //
-//   |SHA1|, and its alias |SHA|, match legacy cipher suites using HMAC-SHA1.
+// - |SHA1|, and its alias |SHA|, match legacy cipher suites using HMAC-SHA1.
 //
 // Deprecated cipher rules:
 //
-//   |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|,
+// - |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|,
 //   |kECDHE|, and |ECDHE|, respectively.
 //
-//   |HIGH| is an alias for |ALL|.
+// - |HIGH| is an alias for |ALL|.
 //
-//   |FIPS| is an alias for |HIGH|.
+// - |FIPS| is an alias for |HIGH|.
 //
-//   |SSLv3| and |TLSv1| match ciphers available in TLS 1.1 or earlier.
+// - |SSLv3| and |TLSv1| match ciphers available in TLS 1.1 or earlier.
 //   |TLSv1_2| matches ciphers new in TLS 1.2. This is confusing and should not
 //   be used.
 //
@@ -2479,16 +2479,19 @@ OPENSSL_EXPORT int SSL_get_negotiated_group(const SSL *ssl);
 #define SSL_VERIFY_PEER_IF_NO_OBC 0x04
 
 // SSL_CTX_set_verify configures certificate verification behavior. |mode| is
-// one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is
-// used to customize certificate verification, but is deprecated. See
-// |X509_STORE_CTX_set_verify_cb| for details.
-//
-// The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
-// |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
-//
-// WARNING: |callback| should be NULL. This callback does not replace the
-// default certificate verification process and is, instead, called multiple
-// times in the course of that process. It is very difficult to implement this
+// one of the |SSL_VERIFY_*| values defined above. |callback| should be NULL.
+//
+// If |callback| is non-NULL, it is called as in |X509_STORE_CTX_set_verify_cb|,
+// which is a deprecated and fragile mechanism to run the default certificate
+// verification process, but suppress individual errors in it. See
+// |X509_STORE_CTX_set_verify_cb| for details, If set, the callback may use
+// |SSL_get_ex_data_X509_STORE_CTX_idx| with |X509_STORE_CTX_get_ex_data| to
+// look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| is not suitable for implementing custom certificate
+// check, accepting all certificates, or extracting the certificate after
+// verification. It does not replace the default process and is called multiple
+// times throughout that process. It is also very difficult to implement this
 // callback safely, without inadvertently relying on implementation details or
 // making incorrect assumptions about when the callback is called.
 //
@@ -2496,35 +2499,30 @@ OPENSSL_EXPORT int SSL_get_negotiated_group(const SSL *ssl);
 // |SSL_CTX_set_cert_verify_callback| to customize certificate verification.
 // Those callbacks can inspect the peer-sent chain, call |X509_verify_cert| and
 // inspect the result, or perform other operations more straightforwardly.
-//
-// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
-// haven't documented it yet. Later that will have a more detailed warning about
-// why one should not use this callback.
 OPENSSL_EXPORT void SSL_CTX_set_verify(
     SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx));
 
 // SSL_set_verify configures certificate verification behavior. |mode| is one of
-// the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to
-// customize certificate verification, but is deprecated. See the behavior of
-// |X509_STORE_CTX_set_verify_cb|.
-//
-// The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
-// |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
-//
-// WARNING: |callback| should be NULL. This callback does not replace the
-// default certificate verification process and is, instead, called multiple
-// times in the course of that process. It is very difficult to implement this
+// the |SSL_VERIFY_*| values defined above. |callback| should be NULL.
+//
+// If |callback| is non-NULL, it is called as in |X509_STORE_CTX_set_verify_cb|,
+// which is a deprecated and fragile mechanism to run the default certificate
+// verification process, but suppress individual errors in it. See
+// |X509_STORE_CTX_set_verify_cb| for details, If set, the callback may use
+// |SSL_get_ex_data_X509_STORE_CTX_idx| with |X509_STORE_CTX_get_ex_data| to
+// look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| is not suitable for implementing custom certificate
+// check, accepting all certificates, or extracting the certificate after
+// verification. It does not replace the default process and is called multiple
+// times throughout that process. It is also very difficult to implement this
 // callback safely, without inadvertently relying on implementation details or
 // making incorrect assumptions about when the callback is called.
 //
-// Instead, use |SSL_set_custom_verify| or |SSL_CTX_set_cert_verify_callback| to
+// Instead, use |SSL_set_custom_verify| or |SSL_set_cert_verify_callback| to
 // customize certificate verification. Those callbacks can inspect the peer-sent
 // chain, call |X509_verify_cert| and inspect the result, or perform other
 // operations more straightforwardly.
-//
-// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
-// haven't documented it yet. Later that will have a more detailed warning about
-// why one should not use this callback.
 OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode,
                                    int (*callback)(int ok,
                                                    X509_STORE_CTX *store_ctx));
@@ -2587,16 +2585,27 @@ OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *ssl))(
 // ineffective. Simply checking that a host has some certificate from a CA is
 // rarely meaningful—you have to check that the CA believed that the host was
 // who you expect to be talking to.
+//
+// By default, both subject alternative names and the subject's common name
+// attribute are checked. The latter has long been deprecated, so callers should
+// call |SSL_set_hostflags| with |X509_CHECK_FLAG_NEVER_CHECK_SUBJECT| to use
+// the standard behavior. https://crbug.com/boringssl/464 tracks fixing the
+// default.
 OPENSSL_EXPORT int SSL_set1_host(SSL *ssl, const char *hostname);
 
+// SSL_set_hostflags calls |X509_VERIFY_PARAM_set_hostflags| on the
+// |X509_VERIFY_PARAM| associated with this |SSL*|. |flags| should be some
+// combination of the |X509_CHECK_*| constants.
+OPENSSL_EXPORT void SSL_set_hostflags(SSL *ssl, unsigned flags);
+
 // SSL_CTX_set_verify_depth sets the maximum depth of a certificate chain
-// accepted in verification. This number does not include the leaf, so a depth
-// of 1 allows the leaf and one CA certificate.
+// accepted in verification. This count excludes both the target certificate and
+// the trust anchor (root certificate).
 OPENSSL_EXPORT void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth);
 
 // SSL_set_verify_depth sets the maximum depth of a certificate chain accepted
-// in verification. This number does not include the leaf, so a depth of 1
-// allows the leaf and one CA certificate.
+// in verification. This count excludes both the target certificate and the
+// trust anchor (root certificate).
 OPENSSL_EXPORT void SSL_set_verify_depth(SSL *ssl, int depth);
 
 // SSL_CTX_get_verify_depth returns the maximum depth of a certificate accepted
@@ -2762,11 +2771,6 @@ OPENSSL_EXPORT int SSL_set_verify_algorithm_prefs(SSL *ssl,
                                                   const uint16_t *prefs,
                                                   size_t num_prefs);
 
-// SSL_set_hostflags calls |X509_VERIFY_PARAM_set_hostflags| on the
-// |X509_VERIFY_PARAM| associated with this |SSL*|. The |flags| argument
-// should be one of the |X509_CHECK_*| constants.
-OPENSSL_EXPORT void SSL_set_hostflags(SSL *ssl, unsigned flags);
-
 
 // Client certificate CA list.
 //
@@ -3036,6 +3040,10 @@ OPENSSL_EXPORT void SSL_get0_peer_application_settings(const SSL *ssl,
 // connection and zero otherwise.
 OPENSSL_EXPORT int SSL_has_application_settings(const SSL *ssl);
 
+// SSL_set_alps_use_new_codepoint configures whether to use the new ALPS
+// codepoint. By default, the old codepoint is used.
+OPENSSL_EXPORT void SSL_set_alps_use_new_codepoint(SSL *ssl, int use_new);
+
 
 // Certificate compression.
 //
@@ -4056,12 +4064,15 @@ OPENSSL_EXPORT int SSL_CTX_set_record_protocol_version(SSL_CTX *ctx,
 
 // Handshake hints.
 //
-// *** EXPERIMENTAL — DO NOT USE WITHOUT CHECKING ***
+// WARNING: Contact the BoringSSL team before using this API. While this
+// mechanism was designed to gracefully recover from version skew and
+// configuration mismatch, splitting a single TLS server into multiple services
+// is complex.
 //
 // Some server deployments make asynchronous RPC calls in both ClientHello
 // dispatch and private key operations. In TLS handshakes where the private key
 // operation occurs in the first round-trip, this results in two consecutive RPC
-// round-trips. Handshake hints allow the RPC service to predicte a signature.
+// round-trips. Handshake hints allow the RPC service to predict a signature.
 // If correctly predicted, this can skip the second RPC call.
 //
 // First, the server installs a certificate selection callback (see
@@ -4087,10 +4098,6 @@ OPENSSL_EXPORT int SSL_CTX_set_record_protocol_version(SSL_CTX *ctx,
 // the private key in later round-trips, such as TLS 1.3 HelloRetryRequest. In
 // those cases, BoringSSL will not predict a signature as there is no benefit.
 // Callers must allow for handshakes to complete without a predicted signature.
-//
-// Handshake hints are supported for TLS 1.3 and partially supported for
-// TLS 1.2. TLS 1.2 resumption handshakes are not yet fully hinted. They will
-// still work, but may not be as efficient.
 
 // SSL_serialize_capabilities writes an opaque byte string to |out| describing
 // some of |ssl|'s capabilities. It returns one on success and zero on error.
@@ -5310,7 +5317,7 @@ enum ssl_compliance_policy_t BORINGSSL_ENUM_INT {
   // doesn't undo other policies it's an error to try and set it.
   ssl_compliance_policy_none,
 
-  // ssl_policy_fips_202205 configures a TLS connection to use:
+  // ssl_compliance_policy_fips_202205 configures a TLS connection to use:
   //   * TLS 1.2 or 1.3
   //   * For TLS 1.2, only ECDHE_[RSA|ECDSA]_WITH_AES_*_GCM_SHA*.
   //   * For TLS 1.3, only AES-GCM
@@ -5532,10 +5539,18 @@ BORINGSSL_MAKE_DELETER(SSL_SESSION, SSL_SESSION_free)
 BORINGSSL_MAKE_UP_REF(SSL_SESSION, SSL_SESSION_up_ref)
 
 
-// *** EXPERIMENTAL — DO NOT USE WITHOUT CHECKING ***
+// *** DEPRECATED EXPERIMENT — DO NOT USE ***
 //
 // Split handshakes.
 //
+// WARNING: This mechanism is deprecated and should not be used. It is very
+// fragile and difficult to use correctly. The relationship between
+// configuration options across the two halves is ill-defined and not
+// self-consistent. Additionally, version skew across the two halves risks
+// unusual behavior and connection failure. New development should use the
+// handshake hints API. Existing deployments should migrate to handshake hints
+// to reduce the risk of service outages.
+//
 // Split handshakes allows the handshake part of a TLS connection to be
 // performed in a different process (or on a different machine) than the data
 // exchange. This only applies to servers.
@@ -5829,6 +5844,7 @@ BSSL_NAMESPACE_END
 #define SSL_R_ECH_REJECTED 319
 #define SSL_R_INVALID_OUTER_EXTENSION 320
 #define SSL_R_INCONSISTENT_ECH_NEGOTIATION 321
+#define SSL_R_INVALID_ALPS_CODEPOINT 322
 #define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000
 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010
 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020

data/third_party/boringssl-with-bazel/src/include/openssl/target.h

@@ -55,10 +55,22 @@
 #elif defined(__myriad2__)
 #define OPENSSL_32_BIT
 #else
-// Note BoringSSL only supports standard 32-bit and 64-bit two's-complement,
-// little-endian architectures. Functions will not produce the correct answer
-// on other systems. Run the crypto_test binary, notably
-// crypto/compiler_test.cc, before adding a new architecture.
+// The list above enumerates the platforms that BoringSSL supports. For these
+// platforms we keep a reasonable bar of not breaking them: automated test
+// coverage, for one, but also we need access to these types for machines for
+// fixing them.
+//
+// However, we know that anything that seems to work will soon be expected
+// to work and, quickly, the implicit expectation is that every machine will
+// always work. So this list serves to mark the boundary of what we guarantee.
+// Of course, you can run the code any many more machines, but then you're
+// taking on the burden of fixing it and, if you're doing that, then you must
+// be able to carry local patches. In which case patching this list is trivial.
+//
+// BoringSSL will only possibly work on standard 32-bit and 64-bit
+// two's-complement, little-endian architectures. Functions will not produce
+// the correct answer on other systems. Run the crypto_test binary, notably
+// crypto/compiler_test.cc, before trying a new architecture.
 #error "Unknown target CPU"
 #endif
 
@@ -70,13 +82,20 @@
 #define OPENSSL_WINDOWS
 #endif
 
-// Trusty and Android baremetal aren't't Linux but currently define __linux__.
+// Trusty and Android baremetal aren't Linux but currently define __linux__.
 // As a workaround, we exclude them here.
+// We also exclude nanolibc/CrOS EC/Zephyr. nanolibc/CrOS EC/Zephyr
+// sometimes build for a non-Linux target (which should not define __linux__),
+// but also sometimes build for Linux. Although technically running in Linux
+// userspace, this lacks all the libc APIs we'd normally expect on Linux, so we
+// treat it as a non-Linux target.
 //
 // TODO(b/169780122): Remove this workaround once Trusty no longer defines it.
 // TODO(b/291101350): Remove this workaround once Android baremetal no longer
 // defines it.
-#if defined(__linux__) && !defined(__TRUSTY__) && !defined(ANDROID_BAREMETAL)
+#if defined(__linux__) && !defined(__TRUSTY__) && \
+    !defined(ANDROID_BAREMETAL) && !defined(OPENSSL_NANOLIBC) && \
+    !defined(CROS_EC) && !defined(CROS_ZEPHYR)
 #define OPENSSL_LINUX
 #endif
 
@@ -191,6 +210,12 @@
 #endif
 #endif
 
+// Disable 32-bit Arm assembly on Apple platforms. The last iOS version that
+// supported 32-bit Arm was iOS 10.
+#if defined(OPENSSL_APPLE) && defined(OPENSSL_ARM)
+#define OPENSSL_ASM_INCOMPATIBLE
+#endif
+
 #if defined(OPENSSL_ASM_INCOMPATIBLE)
 #undef OPENSSL_ASM_INCOMPATIBLE
 #if !defined(OPENSSL_NO_ASM)

data/third_party/boringssl-with-bazel/src/include/openssl/time.h

@@ -1,4 +1,4 @@
-/* Copyright (c) 2022, Google Inc.
+/* Copyright (c) 2024, Google Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,27 +15,8 @@
 #ifndef OPENSSL_HEADER_TIME_H
 #define OPENSSL_HEADER_TIME_H
 
-#include <openssl/base.h>
+// Compatibility header, to be deprecated. use <openssl/posix_time.h> instead.
 
-#include <time.h>
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-// OPENSSL_posix_to_tm converts a int64_t POSIX time value in |time|, which must
-// be in the range of year 0000 to 9999, to a broken out time value in |tm|. It
-// returns one on success and zero on error.
-OPENSSL_EXPORT int OPENSSL_posix_to_tm(int64_t time, struct tm *out_tm);
-
-// OPENSSL_tm_to_posix converts a time value between the years 0 and 9999 in
-// |tm| to a POSIX time value in |out|. One is returned on success, zero is
-// returned on failure. It is a failure if |tm| contains out of range values.
-OPENSSL_EXPORT int OPENSSL_tm_to_posix(const struct tm *tm, int64_t *out);
-
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
+#include <openssl/posix_time.h>
 
 #endif  // OPENSSL_HEADER_TIME_H

data/third_party/boringssl-with-bazel/src/include/openssl/tls1.h

@@ -244,7 +244,8 @@ extern "C" {
 
 // ExtensionType value from draft-vvv-tls-alps. This is not an IANA defined
 // extension number.
-#define TLSEXT_TYPE_application_settings 17513
+#define TLSEXT_TYPE_application_settings_old 17513
+#define TLSEXT_TYPE_application_settings 17613
 
 // ExtensionType values from draft-ietf-tls-esni-13. This is not an IANA defined
 // extension number.