grpc 1.57.0 → 1.58.0.pre1

data/include/grpc/impl/grpc_types.h

@@ -25,6 +25,7 @@
 
 #include <stddef.h>
 
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/impl/compression_types.h>
 #include <grpc/slice.h>
 #include <grpc/status.h>
@@ -133,359 +134,6 @@ typedef struct {
   grpc_arg* args;
 } grpc_channel_args;
 
-/** \defgroup grpc_arg_keys
- * Channel argument keys.
- * \{
- */
-/** If non-zero, enable census for tracing and stats collection. */
-#define GRPC_ARG_ENABLE_CENSUS "grpc.census"
-/** If non-zero, enable load reporting. */
-#define GRPC_ARG_ENABLE_LOAD_REPORTING "grpc.loadreporting"
-/** If non-zero, call metric recording is enabled. */
-#define GRPC_ARG_SERVER_CALL_METRIC_RECORDING \
-  "grpc.server_call_metric_recording"
-/** Request that optional features default to off (regardless of what they
-    usually default to) - to enable tight control over what gets enabled */
-#define GRPC_ARG_MINIMAL_STACK "grpc.minimal_stack"
-/** Maximum number of concurrent incoming streams to allow on a http2
-    connection. Int valued. */
-#define GRPC_ARG_MAX_CONCURRENT_STREAMS "grpc.max_concurrent_streams"
-/** Maximum message length that the channel can receive. Int valued, bytes.
-    -1 means unlimited. */
-#define GRPC_ARG_MAX_RECEIVE_MESSAGE_LENGTH "grpc.max_receive_message_length"
-/** \deprecated For backward compatibility.
- * Use GRPC_ARG_MAX_RECEIVE_MESSAGE_LENGTH instead. */
-#define GRPC_ARG_MAX_MESSAGE_LENGTH GRPC_ARG_MAX_RECEIVE_MESSAGE_LENGTH
-/** Maximum message length that the channel can send. Int valued, bytes.
-    -1 means unlimited. */
-#define GRPC_ARG_MAX_SEND_MESSAGE_LENGTH "grpc.max_send_message_length"
-/** Maximum time that a channel may have no outstanding rpcs, after which the
- * server will close the connection. Int valued, milliseconds. INT_MAX means
- * unlimited. */
-#define GRPC_ARG_MAX_CONNECTION_IDLE_MS "grpc.max_connection_idle_ms"
-/** Maximum time that a channel may exist. Int valued, milliseconds.
- * INT_MAX means unlimited. */
-#define GRPC_ARG_MAX_CONNECTION_AGE_MS "grpc.max_connection_age_ms"
-/** Grace period after the channel reaches its max age. Int valued,
-   milliseconds. INT_MAX means unlimited. */
-#define GRPC_ARG_MAX_CONNECTION_AGE_GRACE_MS "grpc.max_connection_age_grace_ms"
-/** Timeout after the last RPC finishes on the client channel at which the
- * channel goes back into IDLE state. Int valued, milliseconds. INT_MAX means
- * unlimited. The default value is 30 minutes and the min value is 1 second. */
-#define GRPC_ARG_CLIENT_IDLE_TIMEOUT_MS "grpc.client_idle_timeout_ms"
-/** Enable/disable support for per-message compression. Defaults to 1, unless
-    GRPC_ARG_MINIMAL_STACK is enabled, in which case it defaults to 0. */
-#define GRPC_ARG_ENABLE_PER_MESSAGE_COMPRESSION "grpc.per_message_compression"
-/** Experimental Arg. Enable/disable support for per-message decompression.
-   Defaults to 1. If disabled, decompression will not be performed and the
-   application will see the compressed message in the byte buffer. */
-#define GRPC_ARG_ENABLE_PER_MESSAGE_DECOMPRESSION \
-  "grpc.per_message_decompression"
-/** Enable/disable support for deadline checking. Defaults to 1, unless
-    GRPC_ARG_MINIMAL_STACK is enabled, in which case it defaults to 0 */
-#define GRPC_ARG_ENABLE_DEADLINE_CHECKS "grpc.enable_deadline_checking"
-/** Initial stream ID for http2 transports. Int valued. */
-#define GRPC_ARG_HTTP2_INITIAL_SEQUENCE_NUMBER \
-  "grpc.http2.initial_sequence_number"
-/** Amount to read ahead on individual streams. Defaults to 64kb, larger
-    values can help throughput on high-latency connections.
-    NOTE: at some point we'd like to auto-tune this, and this parameter
-    will become a no-op. Int valued, bytes. */
-#define GRPC_ARG_HTTP2_STREAM_LOOKAHEAD_BYTES "grpc.http2.lookahead_bytes"
-/** How much memory to use for hpack decoding. Int valued, bytes. */
-#define GRPC_ARG_HTTP2_HPACK_TABLE_SIZE_DECODER \
-  "grpc.http2.hpack_table_size.decoder"
-/** How much memory to use for hpack encoding. Int valued, bytes. */
-#define GRPC_ARG_HTTP2_HPACK_TABLE_SIZE_ENCODER \
-  "grpc.http2.hpack_table_size.encoder"
-/** How big a frame are we willing to receive via HTTP2.
-    Min 16384, max 16777215. Larger values give lower CPU usage for large
-    messages, but more head of line blocking for small messages. */
-#define GRPC_ARG_HTTP2_MAX_FRAME_SIZE "grpc.http2.max_frame_size"
-/** Should BDP probing be performed? */
-#define GRPC_ARG_HTTP2_BDP_PROBE "grpc.http2.bdp_probe"
-/** (DEPRECATED) Does not have any effect.
-    Earlier, this arg configured the minimum time between successive ping frames
-    without receiving any data/header frame, Int valued, milliseconds. This put
-    unnecessary constraints on the configuration of keepalive pings,
-    requiring users to set this channel arg along with
-    GRPC_ARG_KEEPALIVE_TIME_MS. This arg also limited the activity of the other
-    source of pings in gRPC Core - BDP pings, but BDP pings are only sent when
-    there is receive-side data activity, making this arg unuseful for BDP pings
-    too.  */
-#define GRPC_ARG_HTTP2_MIN_SENT_PING_INTERVAL_WITHOUT_DATA_MS \
-  "grpc.http2.min_time_between_pings_ms"
-/** Minimum allowed time between a server receiving successive ping frames
-   without sending any data/header frame. Int valued, milliseconds
- */
-#define GRPC_ARG_HTTP2_MIN_RECV_PING_INTERVAL_WITHOUT_DATA_MS \
-  "grpc.http2.min_ping_interval_without_data_ms"
-/** Channel arg to override the http2 :scheme header */
-#define GRPC_ARG_HTTP2_SCHEME "grpc.http2_scheme"
-/** How many pings can the client send before needing to send a
-   data/header frame? (0 indicates that an infinite number of
-   pings can be sent without sending a data frame or header frame) */
-#define GRPC_ARG_HTTP2_MAX_PINGS_WITHOUT_DATA \
-  "grpc.http2.max_pings_without_data"
-/** How many misbehaving pings the server can bear before sending goaway and
-    closing the transport? (0 indicates that the server can bear an infinite
-    number of misbehaving pings) */
-#define GRPC_ARG_HTTP2_MAX_PING_STRIKES "grpc.http2.max_ping_strikes"
-/** How much data are we willing to queue up per stream if
-    GRPC_WRITE_BUFFER_HINT is set? This is an upper bound */
-#define GRPC_ARG_HTTP2_WRITE_BUFFER_SIZE "grpc.http2.write_buffer_size"
-/** Should we allow receipt of true-binary data on http2 connections?
-    Defaults to on (1) */
-#define GRPC_ARG_HTTP2_ENABLE_TRUE_BINARY "grpc.http2.true_binary"
-/** An experimental channel arg which determines whether the preferred crypto
- * frame size http2 setting sent to the peer at startup. If set to 0 (false
- * - default), the preferred frame size is not sent to the peer. Otherwise it
- * sends a default preferred crypto frame size value of 4GB to the peer at
- * the startup of each connection. */
-#define GRPC_ARG_EXPERIMENTAL_HTTP2_PREFERRED_CRYPTO_FRAME_SIZE \
-  "grpc.experimental.http2.enable_preferred_frame_size"
-/** After a duration of this time the client/server pings its peer to see if the
-    transport is still alive. Int valued, milliseconds. */
-#define GRPC_ARG_KEEPALIVE_TIME_MS "grpc.keepalive_time_ms"
-/** After waiting for a duration of this time, if the keepalive ping sender does
-    not receive the ping ack, it will close the transport. Int valued,
-    milliseconds. */
-#define GRPC_ARG_KEEPALIVE_TIMEOUT_MS "grpc.keepalive_timeout_ms"
-/** Is it permissible to send keepalive pings from the client without any
-   outstanding streams. Int valued, 0(false)/1(true). */
-#define GRPC_ARG_KEEPALIVE_PERMIT_WITHOUT_CALLS \
-  "grpc.keepalive_permit_without_calls"
-/** Default authority to pass if none specified on call construction. A string.
- * */
-#define GRPC_ARG_DEFAULT_AUTHORITY "grpc.default_authority"
-/** Primary user agent: goes at the start of the user-agent metadata
-    sent on each request. A string. */
-#define GRPC_ARG_PRIMARY_USER_AGENT_STRING "grpc.primary_user_agent"
-/** Secondary user agent: goes at the end of the user-agent metadata
-    sent on each request. A string. */
-#define GRPC_ARG_SECONDARY_USER_AGENT_STRING "grpc.secondary_user_agent"
-/** The minimum time between subsequent connection attempts, in ms */
-#define GRPC_ARG_MIN_RECONNECT_BACKOFF_MS "grpc.min_reconnect_backoff_ms"
-/** The maximum time between subsequent connection attempts, in ms */
-#define GRPC_ARG_MAX_RECONNECT_BACKOFF_MS "grpc.max_reconnect_backoff_ms"
-/** The time between the first and second connection attempts, in ms */
-#define GRPC_ARG_INITIAL_RECONNECT_BACKOFF_MS \
-  "grpc.initial_reconnect_backoff_ms"
-/** Minimum amount of time between DNS resolutions, in ms */
-#define GRPC_ARG_DNS_MIN_TIME_BETWEEN_RESOLUTIONS_MS \
-  "grpc.dns_min_time_between_resolutions_ms"
-/** The timeout used on servers for finishing handshaking on an incoming
-    connection.  Defaults to 120 seconds. */
-#define GRPC_ARG_SERVER_HANDSHAKE_TIMEOUT_MS "grpc.server_handshake_timeout_ms"
-/** This *should* be used for testing only.
-    The caller of the secure_channel_create functions may override the target
-    name used for SSL host name checking using this channel argument which is of
-    type \a GRPC_ARG_STRING. If this argument is not specified, the name used
-    for SSL host name checking will be the target parameter (assuming that the
-    secure channel is an SSL channel). If this parameter is specified and the
-    underlying is not an SSL channel, it will just be ignored. */
-#define GRPC_SSL_TARGET_NAME_OVERRIDE_ARG "grpc.ssl_target_name_override"
-/** If non-zero, a pointer to a session cache (a pointer of type
-    grpc_ssl_session_cache*). (use grpc_ssl_session_cache_arg_vtable() to fetch
-    an appropriate pointer arg vtable) */
-#define GRPC_SSL_SESSION_CACHE_ARG "grpc.ssl_session_cache"
-/** If non-zero, it will determine the maximum frame size used by TSI's frame
- *  protector.
- */
-#define GRPC_ARG_TSI_MAX_FRAME_SIZE "grpc.tsi.max_frame_size"
-/** Maximum metadata size (soft limit), in bytes. Note this limit applies to the
-   max sum of all metadata key-value entries in a batch of headers. Some random
-   sample of requests between this limit and
-   `GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE` will be rejected. Defaults to maximum
-   of 8 KB and `GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE` * 0.8 (if set).
- */
-#define GRPC_ARG_MAX_METADATA_SIZE "grpc.max_metadata_size"
-/** Maximum metadata size (hard limit), in bytes. Note this limit applies to the
-   max sum of all metadata key-value entries in a batch of headers. All requests
-   exceeding this limit will be rejected. Defaults to maximum of 16 KB and
-   `GRPC_ARG_MAX_METADATA_SIZE` * 1.25 (if set). */
-#define GRPC_ARG_ABSOLUTE_MAX_METADATA_SIZE "grpc.absolute_max_metadata_size"
-/** If non-zero, allow the use of SO_REUSEPORT if it's available (default 1) */
-#define GRPC_ARG_ALLOW_REUSEPORT "grpc.so_reuseport"
-/** If non-zero, a pointer to a buffer pool (a pointer of type
- * grpc_resource_quota*). (use grpc_resource_quota_arg_vtable() to fetch an
- * appropriate pointer arg vtable) */
-#define GRPC_ARG_RESOURCE_QUOTA "grpc.resource_quota"
-/** If non-zero, expand wildcard addresses to a list of local addresses. */
-#define GRPC_ARG_EXPAND_WILDCARD_ADDRS "grpc.expand_wildcard_addrs"
-/** Service config data in JSON form.
-    This value will be ignored if the name resolver returns a service config. */
-#define GRPC_ARG_SERVICE_CONFIG "grpc.service_config"
-/** Disable looking up the service config via the name resolver. */
-#define GRPC_ARG_SERVICE_CONFIG_DISABLE_RESOLUTION \
-  "grpc.service_config_disable_resolution"
-/** LB policy name. */
-#define GRPC_ARG_LB_POLICY_NAME "grpc.lb_policy_name"
-/** Cap for ring size in the ring_hash LB policy.  The min and max ring size
-    values set in the LB policy config will be capped to this value.
-    Default is 4096. */
-#define GRPC_ARG_RING_HASH_LB_RING_SIZE_CAP "grpc.lb.ring_hash.ring_size_cap"
-/** The grpc_socket_mutator instance that set the socket options. A pointer. */
-#define GRPC_ARG_SOCKET_MUTATOR "grpc.socket_mutator"
-/** The grpc_socket_factory instance to create and bind sockets. A pointer. */
-#define GRPC_ARG_SOCKET_FACTORY "grpc.socket_factory"
-/** The maximum amount of memory used by trace events per channel trace node.
- * Once the maximum is reached, subsequent events will evict the oldest events
- * from the buffer. The unit for this knob is bytes. Setting it to zero causes
- * channel tracing to be disabled. */
-#define GRPC_ARG_MAX_CHANNEL_TRACE_EVENT_MEMORY_PER_NODE \
-  "grpc.max_channel_trace_event_memory_per_node"
-/** If non-zero, gRPC library will track stats and information at at per channel
- * level. Disabling channelz naturally disables channel tracing. The default
- * is for channelz to be enabled. */
-#define GRPC_ARG_ENABLE_CHANNELZ "grpc.enable_channelz"
-/** If non-zero, Cronet transport will coalesce packets to fewer frames
- * when possible. */
-#define GRPC_ARG_USE_CRONET_PACKET_COALESCING \
-  "grpc.use_cronet_packet_coalescing"
-/** Channel arg (integer) setting how large a slice to try and read from the
-   wire each time recvmsg (or equivalent) is called **/
-#define GRPC_ARG_TCP_READ_CHUNK_SIZE "grpc.experimental.tcp_read_chunk_size"
-/** Note this is not a "channel arg" key. This is the default slice size to use
- * when trying to read from the wire if the GRPC_ARG_TCP_READ_CHUNK_SIZE
- * channel arg is unspecified. */
-#define GRPC_TCP_DEFAULT_READ_SLICE_SIZE 8192
-#define GRPC_ARG_TCP_MIN_READ_CHUNK_SIZE \
-  "grpc.experimental.tcp_min_read_chunk_size"
-#define GRPC_ARG_TCP_MAX_READ_CHUNK_SIZE \
-  "grpc.experimental.tcp_max_read_chunk_size"
-/* TCP TX Zerocopy enable state: zero is disabled, non-zero is enabled. By
-   default, it is disabled. */
-#define GRPC_ARG_TCP_TX_ZEROCOPY_ENABLED \
-  "grpc.experimental.tcp_tx_zerocopy_enabled"
-/* TCP TX Zerocopy send threshold: only zerocopy if >= this many bytes sent. By
-   default, this is set to 16KB. */
-#define GRPC_ARG_TCP_TX_ZEROCOPY_SEND_BYTES_THRESHOLD \
-  "grpc.experimental.tcp_tx_zerocopy_send_bytes_threshold"
-/* TCP TX Zerocopy max simultaneous sends: limit for maximum number of pending
-   calls to tcp_write() using zerocopy. A tcp_write() is considered pending
-   until the kernel performs the zerocopy-done callback for all sendmsg() calls
-   issued by the tcp_write(). By default, this is set to 4. */
-#define GRPC_ARG_TCP_TX_ZEROCOPY_MAX_SIMULT_SENDS \
-  "grpc.experimental.tcp_tx_zerocopy_max_simultaneous_sends"
-/* Overrides the TCP socket recieve buffer size, SO_RCVBUF. */
-#define GRPC_ARG_TCP_RECEIVE_BUFFER_SIZE "grpc.tcp_receive_buffer_size"
-/* Timeout in milliseconds to use for calls to the grpclb load balancer.
-   If 0 or unset, the balancer calls will have no deadline. */
-#define GRPC_ARG_GRPCLB_CALL_TIMEOUT_MS "grpc.grpclb_call_timeout_ms"
-/* Specifies the xDS bootstrap config as a JSON string.
-   FOR TESTING PURPOSES ONLY -- DO NOT USE IN PRODUCTION.
-   This option allows controlling the bootstrap configuration on a
-   per-channel basis, which is useful in tests.  However, this results
-   in having a separate xDS client instance per channel rather than
-   using the global instance, which is not the intended way to use xDS.
-   Currently, this will (a) add unnecessary load on the xDS server and
-   (b) break use of CSDS, and there may be additional side effects in
-   the future. */
-#define GRPC_ARG_TEST_ONLY_DO_NOT_USE_IN_PROD_XDS_BOOTSTRAP_CONFIG \
-  "grpc.TEST_ONLY_DO_NOT_USE_IN_PROD.xds_bootstrap_config"
-/* Timeout in milliseconds to wait for the serverlist from the grpclb load
-   balancer before using fallback backend addresses from the resolver.
-   If 0, enter fallback mode immediately. Default value is 10000. */
-#define GRPC_ARG_GRPCLB_FALLBACK_TIMEOUT_MS "grpc.grpclb_fallback_timeout_ms"
-/* Experimental Arg. Channel args to be used for the control-plane channel
- * created to the grpclb load balancers. This is a pointer arg whose value is a
- * grpc_channel_args object. If unset, most channel args from the parent channel
- * will be propagated to the grpclb channel. */
-#define GRPC_ARG_EXPERIMENTAL_GRPCLB_CHANNEL_ARGS \
-  "grpc.experimental.grpclb_channel_args"
-/* Timeout in milliseconds to wait for the child of a specific priority to
-   complete its initial connection attempt before the priority LB policy fails
-   over to the next priority. Default value is 10 seconds. */
-#define GRPC_ARG_PRIORITY_FAILOVER_TIMEOUT_MS \
-  "grpc.priority_failover_timeout_ms"
-/** If non-zero, grpc server's cronet compression workaround will be enabled */
-#define GRPC_ARG_WORKAROUND_CRONET_COMPRESSION \
-  "grpc.workaround.cronet_compression"
-/** String defining the optimization target for a channel.
-    Can be: "latency"    - attempt to minimize latency at the cost of throughput
-            "blend"      - try to balance latency and throughput
-            "throughput" - attempt to maximize throughput at the expense of
-                           latency
-    Defaults to "blend". In the current implementation "blend" is equivalent to
-    "latency". */
-#define GRPC_ARG_OPTIMIZATION_TARGET "grpc.optimization_target"
-/** Enables retry functionality.  Defaults to true.  When enabled,
-    transparent retries will be performed as appropriate, and configurable
-    retries are enabled when they are configured via the service config.
-    For details, see:
-      https://github.com/grpc/proposal/blob/master/A6-client-retries.md
-    NOTE: Hedging functionality is not yet implemented, so those
-          fields in the service config will currently be ignored.  See
-          also the GRPC_ARG_EXPERIMENTAL_ENABLE_HEDGING arg below.
- */
-#define GRPC_ARG_ENABLE_RETRIES "grpc.enable_retries"
-/** Enables hedging functionality, as described in:
-      https://github.com/grpc/proposal/blob/master/A6-client-retries.md
-    Default is currently false, since this functionality is not yet
-    fully implemented.
-    NOTE: This channel arg is experimental and will eventually be removed.
-          Once hedging functionality has been implemented and proves stable,
-          this arg will be removed, and the hedging functionality will
-          be enabled via the GRPC_ARG_ENABLE_RETRIES arg above. */
-#define GRPC_ARG_EXPERIMENTAL_ENABLE_HEDGING "grpc.experimental.enable_hedging"
-/** Per-RPC retry buffer size, in bytes. Default is 256 KiB. */
-#define GRPC_ARG_PER_RPC_RETRY_BUFFER_SIZE "grpc.per_rpc_retry_buffer_size"
-/** Channel arg that carries the bridged objective c object for custom metrics
- * logging filter. */
-#define GRPC_ARG_MOBILE_LOG_CONTEXT "grpc.mobile_log_context"
-/** If non-zero, client authority filter is disabled for the channel */
-#define GRPC_ARG_DISABLE_CLIENT_AUTHORITY_FILTER \
-  "grpc.disable_client_authority_filter"
-/** If set to zero, disables use of http proxies. Enabled by default. */
-#define GRPC_ARG_ENABLE_HTTP_PROXY "grpc.enable_http_proxy"
-/** Channel arg to set http proxy per channel. If set, the channel arg
- *  value will be preferred over the environment variable settings. */
-#define GRPC_ARG_HTTP_PROXY "grpc.http_proxy"
-/** If set to non zero, surfaces the user agent string to the server. User
-    agent is surfaced by default. */
-#define GRPC_ARG_SURFACE_USER_AGENT "grpc.surface_user_agent"
-/** If set, inhibits health checking (which may be enabled via the
- *  service config.) */
-#define GRPC_ARG_INHIBIT_HEALTH_CHECKING "grpc.inhibit_health_checking"
-/** If enabled, the channel's DNS resolver queries for SRV records.
- *  This is useful only when using the "grpclb" load balancing policy,
- *  as described in the following documents:
- *   https://github.com/grpc/proposal/blob/master/A5-grpclb-in-dns.md
- *   https://github.com/grpc/proposal/blob/master/A24-lb-policy-config.md
- *   https://github.com/grpc/proposal/blob/master/A26-grpclb-selection.md
- *  Note that this works only with the "ares" DNS resolver; it isn't supported
- *  by the "native" DNS resolver. */
-#define GRPC_ARG_DNS_ENABLE_SRV_QUERIES "grpc.dns_enable_srv_queries"
-/** If set, determines an upper bound on the number of milliseconds that the
- * c-ares based DNS resolver will wait on queries before cancelling them.
- * The default value is 120,000. Setting this to "0" will disable the
- * overall timeout entirely. Note that this doesn't include internal c-ares
- * timeouts/backoff/retry logic, and so the actual DNS resolution may time out
- * sooner than the value specified here. */
-#define GRPC_ARG_DNS_ARES_QUERY_TIMEOUT_MS "grpc.dns_ares_query_timeout"
-/** If set, uses a local subchannel pool within the channel. Otherwise, uses the
- * global subchannel pool. */
-#define GRPC_ARG_USE_LOCAL_SUBCHANNEL_POOL "grpc.use_local_subchannel_pool"
-/** gRPC Objective-C channel pooling domain string. */
-#define GRPC_ARG_CHANNEL_POOL_DOMAIN "grpc.channel_pooling_domain"
-/** gRPC Objective-C channel pooling id. */
-#define GRPC_ARG_CHANNEL_ID "grpc.channel_id"
-/** Channel argument for grpc_authorization_policy_provider. If present, enables
-    gRPC authorization check. */
-#define GRPC_ARG_AUTHORIZATION_POLICY_PROVIDER \
-  "grpc.authorization_policy_provider"
-/** EXPERIMENTAL. Updates to a server's configuration from a config fetcher (for
- * example, listener updates from xDS) cause all older connections to be
- * gracefully shut down (i.e., "drained") with a grace period configured by this
- * channel arg. Int valued, milliseconds. Defaults to 10 minutes.*/
-#define GRPC_ARG_SERVER_CONFIG_CHANGE_DRAIN_GRACE_TIME_MS \
-  "grpc.experimental.server_config_change_drain_grace_time_ms"
-/** Configure the Differentiated Services Code Point used on outgoing packets.
- *  Integer value ranging from 0 to 63. */
-#define GRPC_ARG_DSCP "grpc.dscp"
-/** \} */
-
 /** Result of a grpc call. If the caller satisfies the prerequisites of a
     particular operation, the grpc_call_error returned will be GRPC_CALL_OK.
     Receiving any other value listed here is an indication of a bug in the

data/include/grpc/module.modulemap

@@ -12,6 +12,7 @@ header "byte_buffer.h"
   header "grpc_posix.h"
   header "grpc_security.h"
   header "grpc_security_constants.h"
+  header "impl/channel_arg_names.h"
   header "impl/codegen/atm.h"
   header "impl/codegen/byte_buffer.h"
   header "impl/codegen/byte_buffer_reader.h"

data/src/core/ext/filters/backend_metrics/backend_metric_filter.cc

@@ -30,7 +30,7 @@
 #include "upb/upb.hpp"
 #include "xds/data/orca/v3/orca_load_report.upb.h"
 
-#include <grpc/grpc.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/support/log.h>
 
 #include "src/core/ext/filters/client_channel/lb_policy/backend_metric_data.h"

data/src/core/ext/filters/channel_idle/channel_idle_filter.cc

@@ -19,6 +19,7 @@
 
 #include "src/core/ext/filters/channel_idle/channel_idle_filter.h"
 
+#include <stdint.h>
 #include <stdlib.h>
 
 #include <functional>
@@ -26,7 +27,7 @@
 
 #include "absl/types/optional.h"
 
-#include <grpc/grpc.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/support/log.h>
 
 #include "src/core/lib/channel/channel_args.h"

data/src/core/ext/filters/client_channel/client_channel.cc

@@ -41,6 +41,7 @@
 #include "absl/types/variant.h"
 
 #include <grpc/event_engine/event_engine.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/slice.h>
 #include <grpc/status.h>
 #include <grpc/support/json.h>
@@ -512,6 +513,7 @@ class ClientChannel::SubchannelWrapper : public SubchannelInterface {
         ++it->second;
       }
     }
+    GPR_DEBUG_ASSERT(chand_->work_serializer_->RunningInWorkSerializer());
     chand_->subchannel_wrappers_.insert(this);
   }
 
@@ -521,6 +523,7 @@ class ClientChannel::SubchannelWrapper : public SubchannelInterface {
               "chand=%p: destroying subchannel wrapper %p for subchannel %p",
               chand_, this, subchannel_.get());
     }
+    GPR_DEBUG_ASSERT(chand_->work_serializer_->RunningInWorkSerializer());
     chand_->subchannel_wrappers_.erase(this);
     if (chand_->channelz_node_ != nullptr) {
       auto* subchannel_node = subchannel_->channelz_node();
@@ -614,15 +617,16 @@ class ClientChannel::SubchannelWrapper : public SubchannelInterface {
           DEBUG_LOCATION);
     }
 
-    void OnConnectivityStateChange(grpc_connectivity_state state,
-                                   const absl::Status& status) override {
+    void OnConnectivityStateChange(
+        RefCountedPtr<ConnectivityStateWatcherInterface> self,
+        grpc_connectivity_state state, const absl::Status& status) override {
       if (GRPC_TRACE_FLAG_ENABLED(grpc_client_channel_trace)) {
         gpr_log(GPR_INFO,
                 "chand=%p: connectivity change for subchannel wrapper %p "
                 "subchannel %p; hopping into work_serializer",
                 parent_->chand_, parent_.get(), parent_->subchannel_.get());
       }
-      Ref().release();  // ref owned by lambda
+      self.release();  // Held by callback.
       parent_->chand_->work_serializer_->Run(
           [this, state, status]() ABSL_EXCLUSIVE_LOCKS_REQUIRED(
               *parent_->chand_->work_serializer_) {

data/src/core/ext/filters/client_channel/http_proxy.cc

@@ -39,7 +39,7 @@
 #include "absl/strings/strip.h"
 #include "absl/types/optional.h"
 
-#include <grpc/grpc.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/support/alloc.h>
 #include <grpc/support/log.h>
 

data/src/core/ext/filters/client_channel/lb_policy/address_filtering.cc

@@ -36,7 +36,7 @@ int HierarchicalPathArg::ChannelArgsCompare(const HierarchicalPathArg* a,
                                             const HierarchicalPathArg* b) {
   for (size_t i = 0; i < a->path_.size(); ++i) {
     if (b->path_.size() == i) return 1;
-    int r = a->path_[i].compare(b->path_[i]);
+    int r = a->path_[i].as_string_view().compare(b->path_[i].as_string_view());
     if (r != 0) return r;
   }
   if (b->path_.size() > a->path_.size()) return -1;
@@ -47,19 +47,24 @@ absl::StatusOr<HierarchicalAddressMap> MakeHierarchicalAddressMap(
     const absl::StatusOr<ServerAddressList>& addresses) {
   if (!addresses.ok()) return addresses.status();
   HierarchicalAddressMap result;
+  RefCountedPtr<HierarchicalPathArg> remaining_path_attr;
   for (const ServerAddress& address : *addresses) {
     const auto* path_arg = address.args().GetObject<HierarchicalPathArg>();
     if (path_arg == nullptr) continue;
-    const std::vector<std::string>& path = path_arg->path();
+    const std::vector<RefCountedStringValue>& path = path_arg->path();
     auto it = path.begin();
     if (it == path.end()) continue;
     ServerAddressList& target_list = result[*it];
     ChannelArgs args = address.args();
     ++it;
     if (it != path.end()) {
-      std::vector<std::string> remaining_path(it, path.end());
-      args = args.SetObject(
-          MakeRefCounted<HierarchicalPathArg>(std::move(remaining_path)));
+      std::vector<RefCountedStringValue> remaining_path(it, path.end());
+      if (remaining_path_attr == nullptr ||
+          remaining_path_attr->path() != remaining_path) {
+        remaining_path_attr =
+            MakeRefCounted<HierarchicalPathArg>(std::move(remaining_path));
+      }
+      args = args.SetObject(remaining_path_attr);
     }
     target_list.emplace_back(address.address(), args);
   }

data/src/core/ext/filters/client_channel/lb_policy/address_filtering.h

@@ -20,7 +20,6 @@
 #include <grpc/support/port_platform.h>
 
 #include <map>
-#include <string>
 #include <utility>
 #include <vector>
 
@@ -28,6 +27,7 @@
 #include "absl/strings/string_view.h"
 
 #include "src/core/lib/gprpp/ref_counted.h"
+#include "src/core/lib/gprpp/ref_counted_string.h"
 #include "src/core/lib/resolver/server_address.h"
 
 // The resolver returns a flat list of addresses.  When a hierarchy of
@@ -88,7 +88,7 @@ namespace grpc_core {
 // to be associated with the address.
 class HierarchicalPathArg : public RefCounted<HierarchicalPathArg> {
  public:
-  explicit HierarchicalPathArg(std::vector<std::string> path)
+  explicit HierarchicalPathArg(std::vector<RefCountedStringValue> path)
       : path_(std::move(path)) {}
 
   // Channel arg traits methods.
@@ -96,15 +96,17 @@ class HierarchicalPathArg : public RefCounted<HierarchicalPathArg> {
   static int ChannelArgsCompare(const HierarchicalPathArg* a,
                                 const HierarchicalPathArg* b);
 
-  const std::vector<std::string>& path() const { return path_; }
+  const std::vector<RefCountedStringValue>& path() const { return path_; }
 
  private:
-  std::vector<std::string> path_;
+  std::vector<RefCountedStringValue> path_;
 };
 
 // A map from the next path element to the addresses that fall under
 // that path element.
-using HierarchicalAddressMap = std::map<std::string, ServerAddressList>;
+using HierarchicalAddressMap =
+    std::map<RefCountedStringValue, ServerAddressList,
+             RefCountedStringValueLessThan>;
 
 // Splits up the addresses into a separate list for each child.
 absl::StatusOr<HierarchicalAddressMap> MakeHierarchicalAddressMap(

data/src/core/ext/filters/client_channel/lb_policy/grpclb/grpclb.cc

@@ -54,6 +54,7 @@
 #include "src/core/ext/filters/client_channel/lb_policy/grpclb/grpclb.h"
 
 #include <grpc/event_engine/event_engine.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/support/json.h>
 
 // IWYU pragma: no_include <sys/socket.h>

data/src/core/ext/filters/client_channel/lb_policy/health_check_client.cc

@@ -33,7 +33,7 @@
 #include "upb/base/string_view.h"
 #include "upb/upb.hpp"
 
-#include <grpc/grpc.h>
+#include <grpc/impl/channel_arg_names.h>
 #include <grpc/impl/connectivity_state.h>
 #include <grpc/slice.h>
 #include <grpc/status.h>
@@ -311,9 +311,11 @@ class HealthProducer::ConnectivityWatcher
   explicit ConnectivityWatcher(WeakRefCountedPtr<HealthProducer> producer)
       : producer_(std::move(producer)) {}
 
-  void OnConnectivityStateChange(grpc_connectivity_state state,
-                                 const absl::Status& status) override {
+  void OnConnectivityStateChange(
+      RefCountedPtr<ConnectivityStateWatcherInterface> self,
+      grpc_connectivity_state state, const absl::Status& status) override {
     producer_->OnConnectivityStateChange(state, status);
+    self.reset();
   }
 
   grpc_pollset_set* interested_parties() override {

data/src/core/ext/filters/client_channel/lb_policy/oob_backend_metric.cc

@@ -77,9 +77,11 @@ class OrcaProducer::ConnectivityWatcher
     grpc_pollset_set_destroy(interested_parties_);
   }
 
-  void OnConnectivityStateChange(grpc_connectivity_state state,
-                                 const absl::Status&) override {
+  void OnConnectivityStateChange(
+      RefCountedPtr<ConnectivityStateWatcherInterface> self,
+      grpc_connectivity_state state, const absl::Status&) override {
     producer_->OnConnectivityStateChange(state);
+    self.reset();
   }
 
   grpc_pollset_set* interested_parties() override {