grpc 1.55.3 → 1.56.0.pre3

data/third_party/boringssl-with-bazel/src/include/openssl/bio.h

@@ -873,7 +873,6 @@ struct bio_st {
 #define BIO_C_GET_FILE_PTR 107
 #define BIO_C_SET_FILENAME 108
 #define BIO_C_SET_SSL 109
-#define BIO_C_GET_SSL 110
 #define BIO_C_SET_MD 111
 #define BIO_C_GET_MD 112
 #define BIO_C_GET_CIPHER_STATUS 113
@@ -887,9 +886,6 @@ struct bio_st {
 #define BIO_C_GET_PROXY_PARAM 121
 #define BIO_C_SET_BUFF_READ_DATA 122  // data to read first
 #define BIO_C_GET_ACCEPT 124
-#define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125
-#define BIO_C_GET_SSL_NUM_RENEGOTIATES 126
-#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127
 #define BIO_C_FILE_SEEK 128
 #define BIO_C_GET_CIPHER_CTX 129
 #define BIO_C_SET_BUF_MEM_EOF_RETURN 130  // return end of input value

data/third_party/boringssl-with-bazel/src/include/openssl/blake2.h

@@ -28,10 +28,7 @@ extern "C" {
 struct blake2b_state_st {
   uint64_t h[8];
   uint64_t t_low, t_high;
-  union {
-    uint8_t bytes[BLAKE2B_CBLOCK];
-    uint64_t words[16];
-  } block;
+  uint8_t block[BLAKE2B_CBLOCK];
   size_t block_used;
 };
 

data/third_party/boringssl-with-bazel/src/include/openssl/evp.h

@@ -239,9 +239,9 @@ OPENSSL_EXPORT int EVP_marshal_private_key(CBB *cbb, const EVP_PKEY *key);
 // Raw keys
 //
 // Some keys types support a "raw" serialization. Currently the only supported
-// raw format is Ed25519, where the public key and private key formats are those
-// specified in RFC 8032. Note the RFC 8032 private key format is the 32-byte
-// prefix of |ED25519_sign|'s 64-byte private key.
+// raw formats are X25519 and Ed25519, where the formats are those specified in
+// RFC 7748 and RFC 8032, respectively. Note the RFC 8032 private key format is
+// the 32-byte prefix of |ED25519_sign|'s 64-byte private key.
 
 // EVP_PKEY_new_raw_private_key returns a newly allocated |EVP_PKEY| wrapping a
 // private key of the specified type. It returns one on success and zero on

data/third_party/boringssl-with-bazel/src/include/openssl/hpke.h

@@ -249,6 +249,34 @@ OPENSSL_EXPORT int EVP_HPKE_CTX_setup_recipient(
     const EVP_HPKE_AEAD *aead, const uint8_t *enc, size_t enc_len,
     const uint8_t *info, size_t info_len);
 
+// EVP_HPKE_CTX_setup_auth_sender implements the SetupAuthS HPKE operation. It
+// behaves like |EVP_HPKE_CTX_setup_sender| but authenticates the resulting
+// context with |key|.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_sender(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_auth_sender_with_seed_for_testing behaves like
+// |EVP_HPKE_CTX_setup_auth_sender|, but takes a seed to behave
+// deterministically. The seed's format depends on |kem|. For X25519, it is the
+// sender's ephemeral private key.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_sender_with_seed_for_testing(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len, const uint8_t *seed, size_t seed_len);
+
+// EVP_HPKE_CTX_setup_auth_recipient implements the SetupAuthR HPKE operation.
+// It behaves like |EVP_HPKE_CTX_setup_recipient| but checks the resulting
+// context was authenticated with |peer_public_key|.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_auth_recipient(
+    EVP_HPKE_CTX *ctx, const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf,
+    const EVP_HPKE_AEAD *aead, const uint8_t *enc, size_t enc_len,
+    const uint8_t *info, size_t info_len, const uint8_t *peer_public_key,
+    size_t peer_public_key_len);
+
 
 // Using an HPKE context.
 //

data/third_party/boringssl-with-bazel/src/include/openssl/nid.h

@@ -4235,9 +4235,6 @@ extern "C" {
 #define LN_auth_any "auth-any"
 #define NID_auth_any 958
 
-#define SN_CECPQ2 "CECPQ2"
-#define NID_CECPQ2 959
-
 #define SN_ED448 "ED448"
 #define NID_ED448 960
 #define OBJ_ED448 1L, 3L, 101L, 113L
@@ -4255,14 +4252,8 @@ extern "C" {
 #define LN_hkdf "hkdf"
 #define NID_hkdf 963
 
-#define SN_X25519Kyber768 "X25519Kyber768"
-#define NID_X25519Kyber768 964
-
-#define SN_P256Kyber768 "P256Kyber768"
-#define NID_P256Kyber768 965
-
-#define SN_P384Kyber768 "P384Kyber768"
-#define NID_P384Kyber768 966
+#define SN_X25519Kyber768Draft00 "X25519Kyber768Draft00"
+#define NID_X25519Kyber768Draft00 964
 
 
 #if defined(__cplusplus)

data/third_party/boringssl-with-bazel/src/include/openssl/pem.h

@@ -372,9 +372,6 @@ OPENSSL_EXPORT STACK_OF(X509_INFO) *PEM_X509_INFO_read(FILE *fp,
 // password.
 OPENSSL_EXPORT int PEM_def_callback(char *buf, int size, int rwflag,
                                     void *userdata);
-OPENSSL_EXPORT void PEM_proc_type(char *buf, int type);
-OPENSSL_EXPORT void PEM_dek_info(char *buf, const char *type, int len,
-                                 char *str);
 
 
 DECLARE_PEM_rw(X509, X509)

data/third_party/boringssl-with-bazel/src/include/openssl/rsa.h

@@ -79,7 +79,22 @@ extern "C" {
 // documented, functions which take a |const| pointer are non-mutating and
 // functions which take a non-|const| pointer are mutating.
 
-// RSA_new returns a new, empty |RSA| object or NULL on error.
+// RSA_new_public_key returns a new |RSA| object containing a public key with
+// the specified parameters, or NULL on error or invalid input.
+OPENSSL_EXPORT RSA *RSA_new_public_key(const BIGNUM *n, const BIGNUM *e);
+
+// RSA_new_private_key returns a new |RSA| object containing a private key with
+// the specified parameters, or NULL on error or invalid input. All parameters
+// are mandatory and may not be NULL.
+//
+// This function creates standard RSA private keys with CRT parameters.
+OPENSSL_EXPORT RSA *RSA_new_private_key(const BIGNUM *n, const BIGNUM *e,
+                                        const BIGNUM *d, const BIGNUM *p,
+                                        const BIGNUM *q, const BIGNUM *dmp1,
+                                        const BIGNUM *dmq1, const BIGNUM *iqmp);
+
+// RSA_new returns a new, empty |RSA| object or NULL on error. Prefer using
+// |RSA_new_public_key| or |RSA_new_private_key| to import an RSA key.
 OPENSSL_EXPORT RSA *RSA_new(void);
 
 // RSA_new_method acts the same as |RSA_new| but takes an explicit |ENGINE|.
@@ -148,6 +163,20 @@ OPENSSL_EXPORT void RSA_get0_crt_params(const RSA *rsa, const BIGNUM **out_dmp1,
                                         const BIGNUM **out_dmq1,
                                         const BIGNUM **out_iqmp);
 
+
+// Setting individual properties.
+//
+// These functions allow setting individual properties of an |RSA| object. This
+// is typically used with |RSA_new| to construct an RSA key field by field.
+// Prefer instead to use |RSA_new_public_key| and |RSA_new_private_key|. These
+// functions defer some initialization to the first use of an |RSA| object. This
+// means invalid inputs may be caught late.
+//
+// TODO(crbug.com/boringssl/316): This deferred initialization also causes
+// performance problems in multi-threaded applications. The preferred APIs
+// currently have the same issues, but they will initialize eagerly in the
+// future.
+
 // RSA_set0_key sets |rsa|'s modulus, public exponent, and private exponent to
 // |n|, |e|, and |d| respectively, if non-NULL. On success, it takes ownership
 // of each argument and returns one. Otherwise, it returns zero.
@@ -570,6 +599,48 @@ OPENSSL_EXPORT int RSA_private_key_to_bytes(uint8_t **out_bytes,
                                             size_t *out_len, const RSA *rsa);
 
 
+// Obscure RSA variants.
+//
+// These functions allow creating RSA keys with obscure combinations of
+// parameters.
+
+// RSA_new_private_key_no_crt behaves like |RSA_new_private_key| but constructs
+// an RSA key without CRT coefficients.
+//
+// Keys created by this function will be less performant and cannot be
+// serialized.
+OPENSSL_EXPORT RSA *RSA_new_private_key_no_crt(const BIGNUM *n, const BIGNUM *e,
+                                               const BIGNUM *d);
+
+// RSA_new_private_key_no_e behaves like |RSA_new_private_key| but constructs an
+// RSA key without CRT parameters or public exponent.
+//
+// Keys created by this function will be less performant, cannot be serialized,
+// and lack hardening measures that protect against side channels and fault
+// attacks.
+OPENSSL_EXPORT RSA *RSA_new_private_key_no_e(const BIGNUM *n, const BIGNUM *d);
+
+// RSA_new_public_key_large_e behaves like |RSA_new_public_key| but allows any
+// |e| up to |n|.
+//
+// BoringSSL typically bounds public exponents as a denial-of-service
+// mitigation. Keys created by this function may perform worse than those
+// created by |RSA_new_public_key|.
+OPENSSL_EXPORT RSA *RSA_new_public_key_large_e(const BIGNUM *n,
+                                               const BIGNUM *e);
+
+// RSA_new_private_key_large_e behaves like |RSA_new_private_key| but allows any
+// |e| up to |n|.
+//
+// BoringSSL typically bounds public exponents as a denial-of-service
+// mitigation. Keys created by this function may perform worse than those
+// created by |RSA_new_private_key|.
+OPENSSL_EXPORT RSA *RSA_new_private_key_large_e(
+    const BIGNUM *n, const BIGNUM *e, const BIGNUM *d, const BIGNUM *p,
+    const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
+    const BIGNUM *iqmp);
+
+
 // ex_data functions.
 //
 // See |ex_data.h| for details.
@@ -600,6 +671,17 @@ OPENSSL_EXPORT void *RSA_get_ex_data(const RSA *rsa, int idx);
 // RSA_FLAG_EXT_PKEY is deprecated and ignored.
 #define RSA_FLAG_EXT_PKEY 0x20
 
+// RSA_FLAG_NO_PUBLIC_EXPONENT indicates that private keys without a public
+// exponent are allowed. This is an internal constant. Use
+// |RSA_new_private_key_no_e| to construct such keys.
+#define RSA_FLAG_NO_PUBLIC_EXPONENT 0x40
+
+// RSA_FLAG_LARGE_PUBLIC_EXPONENT indicates that keys with a large public
+// exponent are allowed. This is an internal constant. Use
+// |RSA_new_public_key_large_e| and |RSA_new_private_key_large_e| to construct
+// such keys.
+#define RSA_FLAG_LARGE_PUBLIC_EXPONENT 0x80
+
 
 // RSA public exponent values.
 
@@ -688,6 +770,14 @@ OPENSSL_EXPORT int RSA_print(BIO *bio, const RSA *rsa, int indent);
 // the id-RSASSA-PSS key encoding.
 OPENSSL_EXPORT const RSA_PSS_PARAMS *RSA_get0_pss_params(const RSA *rsa);
 
+// RSA_new_method_no_e returns a newly-allocated |RSA| object backed by
+// |engine|, with a public modulus of |n| and no known public exponent.
+//
+// Do not use this function. It exists only to support Conscrypt, whose use
+// should be replaced with a more sound mechanism. See
+// https://crbug.com/boringssl/602.
+OPENSSL_EXPORT RSA *RSA_new_method_no_e(const ENGINE *engine, const BIGNUM *n);
+
 
 struct rsa_meth_st {
   struct openssl_method_common_st common;

data/third_party/boringssl-with-bazel/src/include/openssl/span.h

@@ -205,6 +205,11 @@ auto MakeConstSpan(const C &c) -> decltype(MakeConstSpan(c.data(), c.size())) {
   return MakeConstSpan(c.data(), c.size());
 }
 
+template <typename T, size_t size>
+Span<const T> MakeConstSpan(T (&array)[size]) {
+  return array;
+}
+
 BSSL_NAMESPACE_END
 
 }  // extern C++

data/third_party/boringssl-with-bazel/src/include/openssl/ssl.h

@@ -1081,6 +1081,21 @@ OPENSSL_EXPORT int SSL_set_ocsp_response(SSL *ssl,
 OPENSSL_EXPORT const char *SSL_get_signature_algorithm_name(uint16_t sigalg,
                                                             int include_curve);
 
+// SSL_get_all_signature_algorithm_names outputs a list of possible strings
+// |SSL_get_signature_algorithm_name| may return in this version of BoringSSL.
+// It writes at most |max_out| entries to |out| and returns the total number it
+// would have written, if |max_out| had been large enough. |max_out| may be
+// initially set to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_signature_algorithm_names(const char **out,
+                                                            size_t max_out);
+
 // SSL_get_signature_algorithm_key_type returns the key type associated with
 // |sigalg| as an |EVP_PKEY_*| constant or |EVP_PKEY_NONE| if unknown.
 OPENSSL_EXPORT int SSL_get_signature_algorithm_key_type(uint16_t sigalg);
@@ -1394,6 +1409,37 @@ OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher);
 OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
                                        int *out_alg_bits);
 
+// SSL_get_all_cipher_names outputs a list of possible strings
+// |SSL_CIPHER_get_name| may return in this version of BoringSSL. It writes at
+// most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_cipher_names(const char **out,
+                                               size_t max_out);
+
+
+// SSL_get_all_standard_cipher_names outputs a list of possible strings
+// |SSL_CIPHER_standard_name| may return in this version of BoringSSL. It writes
+// at most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_standard_cipher_names(const char **out,
+                                                        size_t max_out);
+
 
 // Cipher suite configuration.
 //
@@ -1430,7 +1476,8 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 // Available cipher rules are:
 //
-//   |ALL| matches all ciphers.
+//   |ALL| matches all ciphers, except for deprecated ciphers which must be
+//   named explicitly.
 //
 //   |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE,
 //   ECDHE, and plain PSK key exchanges, respectively. Note that ECDHE_PSK is
@@ -1449,9 +1496,6 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 //   |SHA1|, and its alias |SHA|, match legacy cipher suites using HMAC-SHA1.
 //
-// Although implemented, authentication-only ciphers match no rules and must be
-// explicitly selected by name.
-//
 // Deprecated cipher rules:
 //
 //   |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|,
@@ -1490,8 +1534,7 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 // TLS 1.3 ciphers do not participate in this mechanism and instead have a
 // built-in preference order. Functions to set cipher lists do not affect TLS
-// 1.3, and functions to query the cipher list do not include TLS 1.3
-// ciphers.
+// 1.3, and functions to query the cipher list do not include TLS 1.3 ciphers.
 
 // SSL_DEFAULT_CIPHER_LIST is the default cipher suite configuration. It is
 // substituted when a cipher string starts with 'DEFAULT'.
@@ -2334,9 +2377,7 @@ OPENSSL_EXPORT int SSL_set1_curves_list(SSL *ssl, const char *curves);
 #define SSL_CURVE_SECP384R1 24
 #define SSL_CURVE_SECP521R1 25
 #define SSL_CURVE_X25519 29
-#define SSL_CURVE_CECPQ2 16696
-#define SSL_CURVE_X25519KYBER768 0x6399
-#define SSL_CURVE_P256KYBER768 0xfe32
+#define SSL_CURVE_X25519_KYBER768_DRAFT00 0x6399
 
 // SSL_get_curve_id returns the ID of the curve used by |ssl|'s most recently
 // completed handshake or 0 if not applicable.
@@ -2349,6 +2390,20 @@ OPENSSL_EXPORT uint16_t SSL_get_curve_id(const SSL *ssl);
 // the given TLS curve id, or NULL if the curve is unknown.
 OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id);
 
+// SSL_get_all_curve_names outputs a list of possible strings
+// |SSL_get_curve_name| may return in this version of BoringSSL. It writes at
+// most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_curve_names(const char **out, size_t max_out);
+
 // SSL_CTX_set1_groups calls |SSL_CTX_set1_curves|.
 OPENSSL_EXPORT int SSL_CTX_set1_groups(SSL_CTX *ctx, const int *groups,
                                        size_t groups_len);
@@ -2411,21 +2466,51 @@ OPENSSL_EXPORT int SSL_set1_groups_list(SSL *ssl, const char *groups);
 
 // SSL_CTX_set_verify configures certificate verification behavior. |mode| is
 // one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is
-// used to customize certificate verification. See the behavior of
-// |X509_STORE_CTX_set_verify_cb|.
+// used to customize certificate verification, but is deprecated. See
+// |X509_STORE_CTX_set_verify_cb| for details.
 //
 // The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
 // |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| should be NULL. This callback does not replace the
+// default certificate verification process and is, instead, called multiple
+// times in the course of that process. It is very difficult to implement this
+// callback safely, without inadvertently relying on implementation details or
+// making incorrect assumptions about when the callback is called.
+//
+// Instead, use |SSL_CTX_set_custom_verify| or
+// |SSL_CTX_set_cert_verify_callback| to customize certificate verification.
+// Those callbacks can inspect the peer-sent chain, call |X509_verify_cert| and
+// inspect the result, or perform other operations more straightforwardly.
+//
+// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
+// haven't documented it yet. Later that will have a more detailed warning about
+// why one should not use this callback.
 OPENSSL_EXPORT void SSL_CTX_set_verify(
     SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx));
 
 // SSL_set_verify configures certificate verification behavior. |mode| is one of
 // the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to
-// customize certificate verification. See the behavior of
+// customize certificate verification, but is deprecated. See the behavior of
 // |X509_STORE_CTX_set_verify_cb|.
 //
 // The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
 // |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| should be NULL. This callback does not replace the
+// default certificate verification process and is, instead, called multiple
+// times in the course of that process. It is very difficult to implement this
+// callback safely, without inadvertently relying on implementation details or
+// making incorrect assumptions about when the callback is called.
+//
+// Instead, use |SSL_set_custom_verify| or |SSL_CTX_set_cert_verify_callback| to
+// customize certificate verification. Those callbacks can inspect the peer-sent
+// chain, call |X509_verify_cert| and inspect the result, or perform other
+// operations more straightforwardly.
+//
+// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
+// haven't documented it yet. Later that will have a more detailed warning about
+// why one should not use this callback.
 OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode,
                                    int (*callback)(int ok,
                                                    X509_STORE_CTX *store_ctx));
@@ -4528,13 +4613,6 @@ OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher,
 // SSL_CIPHER_get_version returns the string "TLSv1/SSLv3".
 OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher);
 
-// SSL_CIPHER_get_rfc_name returns a newly-allocated string containing the
-// result of |SSL_CIPHER_standard_name| or NULL on error. The caller is
-// responsible for calling |OPENSSL_free| on the result.
-//
-// Use |SSL_CIPHER_standard_name| instead.
-OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher);
-
 typedef void COMP_METHOD;
 typedef struct ssl_comp_st SSL_COMP;
 
@@ -4873,6 +4951,21 @@ OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *ssl);
 // For example, "TLSv1.2" or "DTLSv1".
 OPENSSL_EXPORT const char *SSL_get_version(const SSL *ssl);
 
+// SSL_get_all_version_names outputs a list of possible strings
+// |SSL_get_version| may return in this version of BoringSSL. It writes at most
+// |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_version_names(const char **out,
+                                                size_t max_out);
+
 // SSL_get_cipher_list returns the name of the |n|th cipher in the output of
 // |SSL_get_ciphers| or NULL if out of range. Use |SSL_get_ciphers| instead.
 OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *ssl, int n);
@@ -5168,6 +5261,10 @@ OPENSSL_EXPORT uint16_t SSL_CIPHER_get_value(const SSL_CIPHER *cipher);
 // parameters of a TLS connection.
 
 enum ssl_compliance_policy_t BORINGSSL_ENUM_INT {
+  // ssl_compliance_policy_none does nothing. However, since setting this
+  // doesn't undo other policies it's an error to try and set it.
+  ssl_compliance_policy_none,
+
   // ssl_policy_fips_202205 configures a TLS connection to use:
   //   * TLS 1.2 or 1.3
   //   * For TLS 1.2, only ECDHE_[RSA|ECDSA]_WITH_AES_*_GCM_SHA*.
@@ -5182,12 +5279,32 @@ enum ssl_compliance_policy_t BORINGSSL_ENUM_INT {
   // Note: this setting aids with compliance with NIST requirements but does not
   // guarantee it. Careful reading of SP 800-52r2 is recommended.
   ssl_compliance_policy_fips_202205,
+
+  // ssl_compliance_policy_wpa3_192_202304 configures a TLS connection to use:
+  //   * TLS 1.2 or 1.3.
+  //   * For TLS 1.2, only TLS_ECDHE_[ECDSA|RSA]_WITH_AES_256_GCM_SHA384.
+  //   * For TLS 1.3, only AES-256-GCM.
+  //   * P-384 for key agreement.
+  //   * For handshake signatures, only ECDSA with P-384 and SHA-384, or RSA
+  //     with SHA-384 or SHA-512.
+  //
+  // No limitations on the certificate chain nor leaf public key are imposed,
+  // other than by the supported signature algorithms. But WPA3's "192-bit"
+  // mode requires at least P-384 or 3072-bit along the chain. The caller must
+  // enforce this themselves on the verified chain using functions such as
+  // `X509_STORE_CTX_get0_chain`.
+  //
+  // Note that this setting is less secure than the default. The
+  // implementation risks of using a more obscure primitive like P-384
+  // dominate other considerations.
+  ssl_compliance_policy_wpa3_192_202304,
 };
 
 // SSL_CTX_set_compliance_policy configures various aspects of |ctx| based on
 // the given policy requirements. Subsequently calling other functions that
 // configure |ctx| may override |policy|, or may not. This should be the final
-// configuration function called in order to have defined behaviour.
+// configuration function called in order to have defined behaviour. It's a
+// fatal error if |policy| is |ssl_compliance_policy_none|.
 OPENSSL_EXPORT int SSL_CTX_set_compliance_policy(
     SSL_CTX *ctx, enum ssl_compliance_policy_t policy);
 
@@ -5420,6 +5537,18 @@ OPENSSL_EXPORT bool SSL_get_traffic_secrets(
     const SSL *ssl, Span<const uint8_t> *out_read_traffic_secret,
     Span<const uint8_t> *out_write_traffic_secret);
 
+// SSL_CTX_set_aes_hw_override_for_testing sets |override_value| to
+// override checking for aes hardware support for testing. If |override_value|
+// is set to true, the library will behave as if aes hardware support is
+// present. If it is set to false, the library will behave as if aes hardware
+// support is not present.
+OPENSSL_EXPORT void SSL_CTX_set_aes_hw_override_for_testing(
+    SSL_CTX *ctx, bool override_value);
+
+// SSL_set_aes_hw_override_for_testing acts the same as
+// |SSL_CTX_set_aes_override_for_testing| but only configures a single |SSL*|.
+OPENSSL_EXPORT void SSL_set_aes_hw_override_for_testing(SSL *ssl,
+                                                        bool override_value);
 
 BSSL_NAMESPACE_END
 

data/third_party/boringssl-with-bazel/src/include/openssl/thread.h

@@ -78,6 +78,10 @@ typedef union crypto_mutex_st {
   void *handle;
 } CRYPTO_MUTEX;
 #elif !defined(__GLIBC__)
+#if defined(OPENSSL_OPENBSD)
+// OpenBSD does not guarantee pthread_rwlock_t in sys/types.h yet.
+#include <pthread.h>
+#endif
 typedef pthread_rwlock_t CRYPTO_MUTEX;
 #else
 // On glibc, |pthread_rwlock_t| is hidden under feature flags, and we can't

data/third_party/boringssl-with-bazel/src/include/openssl/tls1.h

@@ -408,6 +408,8 @@ extern "C" {
 #define TLS1_CK_ECDHE_RSA_WITH_AES_128_CBC_SHA 0x0300C013
 #define TLS1_CK_ECDHE_RSA_WITH_AES_256_CBC_SHA 0x0300C014
 
+#define TLS1_CK_ECDHE_RSA_WITH_AES_128_CBC_SHA256 0x0300C027
+
 #define TLS1_CK_ECDH_anon_WITH_NULL_SHA 0x0300C015
 #define TLS1_CK_ECDH_anon_WITH_RC4_128_SHA 0x0300C016
 #define TLS1_CK_ECDH_anon_WITH_DES_192_CBC3_SHA 0x0300C017
@@ -518,6 +520,8 @@ extern "C" {
 #define TLS1_TXT_ECDHE_RSA_WITH_AES_128_CBC_SHA "ECDHE-RSA-AES128-SHA"
 #define TLS1_TXT_ECDHE_RSA_WITH_AES_256_CBC_SHA "ECDHE-RSA-AES256-SHA"
 
+#define TLS1_TXT_ECDHE_RSA_WITH_AES_128_CBC_SHA256 "ECDHE-RSA-AES128-SHA256"
+
 #define TLS1_TXT_ECDH_anon_WITH_NULL_SHA "AECDH-NULL-SHA"
 #define TLS1_TXT_ECDH_anon_WITH_RC4_128_SHA "AECDH-RC4-SHA"
 #define TLS1_TXT_ECDH_anon_WITH_DES_192_CBC3_SHA "AECDH-DES-CBC3-SHA"

data/third_party/boringssl-with-bazel/src/include/openssl/trust_token.h

@@ -48,6 +48,14 @@ OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_experiment_v2_voprf(void);
 // PMBTokens and P-384 with up to 3 keys, without RR verification.
 OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_experiment_v2_pmb(void);
 
+// TRUST_TOKEN_pst_v1_voprf is an experimental Trust Tokens protocol
+// using VOPRFs and P-384 with up to 6 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_pst_v1_voprf(void);
+
+// TRUST_TOKEN_pst_v1_pmb is an experimental Trust Tokens protocol using
+// PMBTokens and P-384 with up to 3 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_pst_v1_pmb(void);
+
 // trust_token_st represents a single-use token for the Trust Token protocol.
 // For the client, this is the token and its corresponding signature. For the
 // issuer, this is the token itself.