grpc 1.55.0 → 1.56.0

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/rsa/rsa_impl.c

@@ -74,53 +74,72 @@
 
 
 int rsa_check_public_key(const RSA *rsa) {
-  if (rsa->n == NULL || rsa->e == NULL) {
+  if (rsa->n == NULL) {
     OPENSSL_PUT_ERROR(RSA, RSA_R_VALUE_MISSING);
     return 0;
   }
 
+  // TODO(davidben): 16384-bit RSA is huge. Can we bring this down to a limit of
+  // 8192-bit?
   unsigned n_bits = BN_num_bits(rsa->n);
   if (n_bits > 16 * 1024) {
     OPENSSL_PUT_ERROR(RSA, RSA_R_MODULUS_TOO_LARGE);
     return 0;
   }
 
-  // RSA moduli must be odd. In addition to being necessary for RSA in general,
-  // we cannot setup Montgomery reduction with even moduli.
-  if (!BN_is_odd(rsa->n)) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_RSA_PARAMETERS);
+  // TODO(crbug.com/boringssl/607): Raise this limit. 512-bit RSA was factored
+  // in 1999.
+  if (n_bits < 512) {
+    OPENSSL_PUT_ERROR(RSA, RSA_R_KEY_SIZE_TOO_SMALL);
     return 0;
   }
 
-  // Mitigate DoS attacks by limiting the exponent size. 33 bits was chosen as
-  // the limit based on the recommendations in [1] and [2]. Windows CryptoAPI
-  // doesn't support values larger than 32 bits [3], so it is unlikely that
-  // exponents larger than 32 bits are being used for anything Windows commonly
-  // does.
-  //
-  // [1] https://www.imperialviolet.org/2012/03/16/rsae.html
-  // [2] https://www.imperialviolet.org/2012/03/17/rsados.html
-  // [3] https://msdn.microsoft.com/en-us/library/aa387685(VS.85).aspx
-  static const unsigned kMaxExponentBits = 33;
-  unsigned e_bits = BN_num_bits(rsa->e);
-  if (e_bits > kMaxExponentBits ||
-      // Additionally reject e = 1 or even e. e must be odd to be relatively
-      // prime with phi(n).
-      e_bits < 2 ||
-      !BN_is_odd(rsa->e)) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
+  // RSA moduli must be positive and odd. In addition to being necessary for RSA
+  // in general, we cannot setup Montgomery reduction with even moduli.
+  if (!BN_is_odd(rsa->n) || BN_is_negative(rsa->n)) {
+    OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_RSA_PARAMETERS);
     return 0;
   }
 
-  // Verify |n > e|. Comparing |n_bits| to |kMaxExponentBits| is a small
-  // shortcut to comparing |n| and |e| directly. In reality, |kMaxExponentBits|
-  // is much smaller than the minimum RSA key size that any application should
-  // accept.
-  if (n_bits <= kMaxExponentBits) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_KEY_SIZE_TOO_SMALL);
+  static const unsigned kMaxExponentBits = 33;
+  if (rsa->e != NULL) {
+    // Reject e = 1, negative e, and even e. e must be odd to be relatively
+    // prime with phi(n).
+    unsigned e_bits = BN_num_bits(rsa->e);
+    if (e_bits < 2 || BN_is_negative(rsa->e) || !BN_is_odd(rsa->e)) {
+      OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
+      return 0;
+    }
+    if (rsa->flags & RSA_FLAG_LARGE_PUBLIC_EXPONENT) {
+      // The caller has requested disabling DoS protections. Still, e must be
+      // less than n.
+      if (BN_ucmp(rsa->n, rsa->e) <= 0) {
+        OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
+        return 0;
+      }
+    } else {
+      // Mitigate DoS attacks by limiting the exponent size. 33 bits was chosen
+      // as the limit based on the recommendations in [1] and [2]. Windows
+      // CryptoAPI doesn't support values larger than 32 bits [3], so it is
+      // unlikely that exponents larger than 32 bits are being used for anything
+      // Windows commonly does.
+      //
+      // [1] https://www.imperialviolet.org/2012/03/16/rsae.html
+      // [2] https://www.imperialviolet.org/2012/03/17/rsados.html
+      // [3] https://msdn.microsoft.com/en-us/library/aa387685(VS.85).aspx
+      if (e_bits > kMaxExponentBits) {
+        OPENSSL_PUT_ERROR(RSA, RSA_R_BAD_E_VALUE);
+        return 0;
+      }
+
+      // The upper bound on |e_bits| and lower bound on |n_bits| imply e is
+      // bounded by n.
+      assert(BN_ucmp(rsa->n, rsa->e) > 0);
+    }
+  } else if (!(rsa->flags & RSA_FLAG_NO_PUBLIC_EXPONENT)) {
+    OPENSSL_PUT_ERROR(RSA, RSA_R_VALUE_MISSING);
     return 0;
   }
-  assert(BN_ucmp(rsa->n, rsa->e) > 0);
 
   return 1;
 }
@@ -160,6 +179,11 @@ static int freeze_private_key(RSA *rsa, BN_CTX *ctx) {
     goto err;
   }
 
+  // Check the public components are within DoS bounds.
+  if (!rsa_check_public_key(rsa)) {
+    goto err;
+  }
+
   // Pre-compute various intermediate values, as well as copies of private
   // exponents with correct widths. Note that other threads may concurrently
   // read from |rsa->n|, |rsa->e|, etc., so any fixes must be in separate
@@ -183,7 +207,7 @@ static int freeze_private_key(RSA *rsa, BN_CTX *ctx) {
     goto err;
   }
 
-  if (rsa->p != NULL && rsa->q != NULL) {
+  if (rsa->e != NULL && rsa->p != NULL && rsa->q != NULL) {
     // TODO: p and q are also CONSTTIME_SECRET but not yet marked as such
     // because the Montgomery code does things like test whether or not values
     // are zero. So the secret marking probably needs to happen inside that
@@ -262,96 +286,38 @@ err:
   return ret;
 }
 
-size_t rsa_default_size(const RSA *rsa) {
-  return BN_num_bytes(rsa->n);
-}
-
-int RSA_encrypt(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
-                const uint8_t *in, size_t in_len, int padding) {
-  boringssl_ensure_rsa_self_test();
+void rsa_invalidate_key(RSA *rsa) {
+  rsa->private_key_frozen = 0;
 
-  if (!rsa_check_public_key(rsa)) {
-    return 0;
-  }
+  BN_MONT_CTX_free(rsa->mont_n);
+  rsa->mont_n = NULL;
+  BN_MONT_CTX_free(rsa->mont_p);
+  rsa->mont_p = NULL;
+  BN_MONT_CTX_free(rsa->mont_q);
+  rsa->mont_q = NULL;
 
-  const unsigned rsa_size = RSA_size(rsa);
-  BIGNUM *f, *result;
-  uint8_t *buf = NULL;
-  BN_CTX *ctx = NULL;
-  int i, ret = 0;
+  BN_free(rsa->d_fixed);
+  rsa->d_fixed = NULL;
+  BN_free(rsa->dmp1_fixed);
+  rsa->dmp1_fixed = NULL;
+  BN_free(rsa->dmq1_fixed);
+  rsa->dmq1_fixed = NULL;
+  BN_free(rsa->inv_small_mod_large_mont);
+  rsa->inv_small_mod_large_mont = NULL;
 
-  if (max_out < rsa_size) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_OUTPUT_BUFFER_TOO_SMALL);
-    return 0;
+  for (size_t i = 0; i < rsa->num_blindings; i++) {
+    BN_BLINDING_free(rsa->blindings[i]);
   }
+  OPENSSL_free(rsa->blindings);
+  rsa->blindings = NULL;
+  rsa->num_blindings = 0;
+  OPENSSL_free(rsa->blindings_inuse);
+  rsa->blindings_inuse = NULL;
+  rsa->blinding_fork_generation = 0;
+}
 
-  ctx = BN_CTX_new();
-  if (ctx == NULL) {
-    goto err;
-  }
-
-  BN_CTX_start(ctx);
-  f = BN_CTX_get(ctx);
-  result = BN_CTX_get(ctx);
-  buf = OPENSSL_malloc(rsa_size);
-  if (!f || !result || !buf) {
-    goto err;
-  }
-
-  switch (padding) {
-    case RSA_PKCS1_PADDING:
-      i = RSA_padding_add_PKCS1_type_2(buf, rsa_size, in, in_len);
-      break;
-    case RSA_PKCS1_OAEP_PADDING:
-      // Use the default parameters: SHA-1 for both hashes and no label.
-      i = RSA_padding_add_PKCS1_OAEP_mgf1(buf, rsa_size, in, in_len,
-                                          NULL, 0, NULL, NULL);
-      break;
-    case RSA_NO_PADDING:
-      i = RSA_padding_add_none(buf, rsa_size, in, in_len);
-      break;
-    default:
-      OPENSSL_PUT_ERROR(RSA, RSA_R_UNKNOWN_PADDING_TYPE);
-      goto err;
-  }
-
-  if (i <= 0) {
-    goto err;
-  }
-
-  if (BN_bin2bn(buf, rsa_size, f) == NULL) {
-    goto err;
-  }
-
-  if (BN_ucmp(f, rsa->n) >= 0) {
-    // usually the padding functions would catch this
-    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
-    goto err;
-  }
-
-  if (!BN_MONT_CTX_set_locked(&rsa->mont_n, &rsa->lock, rsa->n, ctx) ||
-      !BN_mod_exp_mont(result, f, rsa->e, &rsa->mont_n->N, ctx, rsa->mont_n)) {
-    goto err;
-  }
-
-  // put in leading 0 bytes if the number is less than the length of the
-  // modulus
-  if (!BN_bn2bin_padded(out, rsa_size, result)) {
-    OPENSSL_PUT_ERROR(RSA, ERR_R_INTERNAL_ERROR);
-    goto err;
-  }
-
-  *out_len = rsa_size;
-  ret = 1;
-
-err:
-  if (ctx != NULL) {
-    BN_CTX_end(ctx);
-    BN_CTX_free(ctx);
-  }
-  OPENSSL_free(buf);
-
-  return ret;
+size_t rsa_default_size(const RSA *rsa) {
+  return BN_num_bytes(rsa->n);
 }
 
 // MAX_BLINDINGS_PER_RSA defines the maximum number of cached BN_BLINDINGs per
@@ -516,7 +482,7 @@ int rsa_default_sign_raw(RSA *rsa, size_t *out_len, uint8_t *out,
     goto err;
   }
 
-  if (!RSA_private_transform(rsa, out, buf, rsa_size)) {
+  if (!rsa_private_transform_no_self_test(rsa, out, buf, rsa_size)) {
     goto err;
   }
 
@@ -530,77 +496,17 @@ err:
   return ret;
 }
 
-int rsa_default_decrypt(RSA *rsa, size_t *out_len, uint8_t *out, size_t max_out,
-                        const uint8_t *in, size_t in_len, int padding) {
-  boringssl_ensure_rsa_self_test();
-
-  const unsigned rsa_size = RSA_size(rsa);
-  uint8_t *buf = NULL;
-  int ret = 0;
-
-  if (max_out < rsa_size) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_OUTPUT_BUFFER_TOO_SMALL);
-    return 0;
-  }
-
-  if (padding == RSA_NO_PADDING) {
-    buf = out;
-  } else {
-    // Allocate a temporary buffer to hold the padded plaintext.
-    buf = OPENSSL_malloc(rsa_size);
-    if (buf == NULL) {
-      goto err;
-    }
-  }
-
-  if (in_len != rsa_size) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_DATA_LEN_NOT_EQUAL_TO_MOD_LEN);
-    goto err;
-  }
-
-  if (!RSA_private_transform(rsa, buf, in, rsa_size)) {
-    goto err;
-  }
-
-  switch (padding) {
-    case RSA_PKCS1_PADDING:
-      ret =
-          RSA_padding_check_PKCS1_type_2(out, out_len, rsa_size, buf, rsa_size);
-      break;
-    case RSA_PKCS1_OAEP_PADDING:
-      // Use the default parameters: SHA-1 for both hashes and no label.
-      ret = RSA_padding_check_PKCS1_OAEP_mgf1(out, out_len, rsa_size, buf,
-                                              rsa_size, NULL, 0, NULL, NULL);
-      break;
-    case RSA_NO_PADDING:
-      *out_len = rsa_size;
-      ret = 1;
-      break;
-    default:
-      OPENSSL_PUT_ERROR(RSA, RSA_R_UNKNOWN_PADDING_TYPE);
-      goto err;
-  }
-
-  CONSTTIME_DECLASSIFY(&ret, sizeof(ret));
-  if (!ret) {
-    OPENSSL_PUT_ERROR(RSA, RSA_R_PADDING_CHECK_FAILED);
-  } else {
-    CONSTTIME_DECLASSIFY(out, *out_len);
-  }
-
-err:
-  if (padding != RSA_NO_PADDING) {
-    OPENSSL_free(buf);
-  }
-
-  return ret;
-}
 
 static int mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx);
 
 int rsa_verify_raw_no_self_test(RSA *rsa, size_t *out_len, uint8_t *out,
                                 size_t max_out, const uint8_t *in,
                                 size_t in_len, int padding) {
+  if (rsa->n == NULL || rsa->e == NULL) {
+    OPENSSL_PUT_ERROR(RSA, RSA_R_VALUE_MISSING);
+    return 0;
+  }
+
   if (!rsa_check_public_key(rsa)) {
     return 0;
   }
@@ -740,13 +646,18 @@ int rsa_default_private_transform(RSA *rsa, uint8_t *out, const uint8_t *in,
     goto err;
   }
 
-  const int do_blinding = (rsa->flags & RSA_FLAG_NO_BLINDING) == 0;
+  const int do_blinding =
+      (rsa->flags & (RSA_FLAG_NO_BLINDING | RSA_FLAG_NO_PUBLIC_EXPONENT)) == 0;
 
   if (rsa->e == NULL && do_blinding) {
     // We cannot do blinding or verification without |e|, and continuing without
     // those countermeasures is dangerous. However, the Java/Android RSA API
     // requires support for keys where only |d| and |n| (and not |e|) are known.
-    // The callers that require that bad behavior set |RSA_FLAG_NO_BLINDING|.
+    // The callers that require that bad behavior must set
+    // |RSA_FLAG_NO_BLINDING| or use |RSA_new_private_key_no_e|.
+    //
+    // TODO(davidben): Update this comment when Conscrypt is updated to use
+    // |RSA_new_private_key_no_e|.
     OPENSSL_PUT_ERROR(RSA, RSA_R_NO_PUBLIC_EXPONENT);
     goto err;
   }
@@ -1382,6 +1293,7 @@ static int RSA_generate_key_ex_maybe_fips(RSA *rsa, int bits,
     goto out;
   }
 
+  rsa_invalidate_key(rsa);
   replace_bignum(&rsa->n, &tmp->n);
   replace_bignum(&rsa->e, &tmp->e);
   replace_bignum(&rsa->d, &tmp->d);

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/self_check/self_check.c

@@ -26,6 +26,7 @@
 #include <openssl/ec.h>
 #include <openssl/ecdsa.h>
 #include <openssl/ec_key.h>
+#include <openssl/hkdf.h>
 #include <openssl/hmac.h>
 #include <openssl/nid.h>
 #include <openssl/rsa.h>
@@ -946,6 +947,76 @@ static int boringssl_self_test_fast(void) {
     goto err;
   }
 
+  // TLS v1.3: derives a dummy client-early-traffic secret.
+  static const uint8_t kTLS13Secret[32] = {
+      0x02, 0x4a, 0x0d, 0x80, 0xf3, 0x57, 0xf2, 0x49, 0x9a, 0x12, 0x44,
+      0xda, 0xc2, 0x6d, 0xab, 0x66, 0xfc, 0x13, 0xed, 0x85, 0xfc, 0xa7,
+      0x1d, 0xac, 0xe1, 0x46, 0x21, 0x11, 0x19, 0x52, 0x58, 0x74,
+  };
+  static const uint8_t kTLS13Salt[16] = {
+      0x54, 0x61, 0x11, 0x36, 0x75, 0x91, 0xf0, 0xf8,
+      0x92, 0xec, 0x70, 0xbd, 0x78, 0x2a, 0xef, 0x61,
+  };
+  static const uint8_t kTLS13Label[] = "c e traffic";
+  static const uint8_t kTLS13ClientHelloHash[32] = {
+      0x1d, 0xe8, 0x67, 0xed, 0x93, 0x6a, 0x73, 0x65, 0x9b, 0x05, 0xcf,
+      0x8a, 0x22, 0x77, 0xb7, 0x37, 0x29, 0xf2, 0x44, 0x94, 0x81, 0x6a,
+      0x83, 0x33, 0x7f, 0x09, 0xbb, 0x6c, 0xc2, 0x6f, 0x48, 0x9c,
+  };
+  static const uint8_t kTLS13ExpandLabelOutput[32] = {
+      0x62, 0x91, 0x52, 0x90, 0x2e, 0xc9, 0xcf, 0x9c, 0x5f, 0x1e, 0x0a,
+      0xb7, 0x00, 0x33, 0x42, 0x24, 0xc4, 0xe3, 0xba, 0x01, 0x40, 0x32,
+      0x06, 0xab, 0x09, 0x23, 0x8a, 0xdd, 0x01, 0xa4, 0x05, 0xcd,
+  };
+  uint8_t tls13_extract_output[32];
+  size_t tls13_extract_output_len;
+  uint8_t tls13_expand_label_output[32];
+  if (!HKDF_extract(tls13_extract_output, &tls13_extract_output_len,
+                    EVP_sha256(), kTLS13Secret, sizeof(kTLS13Secret),
+                    kTLS13Salt, sizeof(kTLS13Salt)) ||
+      tls13_extract_output_len != sizeof(tls13_extract_output) ||
+      !CRYPTO_tls13_hkdf_expand_label(
+          tls13_expand_label_output, sizeof(tls13_expand_label_output),
+          EVP_sha256(), tls13_extract_output, sizeof(tls13_extract_output),
+          kTLS13Label, sizeof(kTLS13Label) - 1, kTLS13ClientHelloHash,
+          sizeof(kTLS13ClientHelloHash)) ||
+      !check_test(kTLS13ExpandLabelOutput, tls13_expand_label_output,
+                  sizeof(kTLS13ExpandLabelOutput),
+                  "CRYPTO_tls13_hkdf_expand_label")) {
+    fprintf(stderr, "TLSv1.3 KDF failed.\n");
+    goto err;
+  }
+
+  // HKDF
+  static const uint8_t kHKDFSecret[32] = {
+      0x68, 0x67, 0x85, 0x04, 0xb9, 0xb3, 0xad, 0xd1, 0x7d, 0x59, 0x67,
+      0xa1, 0xa7, 0xbd, 0x37, 0x99, 0x3f, 0xd8, 0xa3, 0x3c, 0xe7, 0x30,
+      0x30, 0x71, 0xf3, 0x9c, 0x09, 0x6d, 0x16, 0x35, 0xb3, 0xc9,
+  };
+  static const uint8_t kHKDFSalt[32] = {
+      0x8a, 0xab, 0x18, 0xb4, 0x9b, 0x0a, 0x17, 0xf9, 0xe8, 0xe6, 0x97,
+      0x1a, 0x3d, 0xff, 0xda, 0x9b, 0x26, 0x8b, 0x3d, 0x17, 0x78, 0x0a,
+      0xb3, 0xea, 0x65, 0xdb, 0x2a, 0xc0, 0x29, 0x9c, 0xfa, 0x72,
+  };
+  static const uint8_t kHKDFInfo[32] = {
+      0xe5, 0x6f, 0xf9, 0xe1, 0x18, 0x5e, 0x64, 0x8c, 0x6c, 0x8f, 0xee,
+      0xc6, 0x93, 0x5a, 0xc5, 0x14, 0x8c, 0xf3, 0xd9, 0x78, 0xd2, 0x3a,
+      0x86, 0xdd, 0x01, 0xdf, 0xb9, 0xe9, 0x5e, 0xe5, 0x1a, 0x56,
+  };
+  static const uint8_t kHKDFOutput[32] = {
+      0xa6, 0x29, 0xb4, 0xd7, 0xf4, 0xc1, 0x16, 0x64, 0x71, 0x5e, 0xa4,
+      0xa8, 0xe6, 0x60, 0x8c, 0xf3, 0xc1, 0xa5, 0x03, 0xe2, 0x22, 0xf9,
+      0x89, 0xe2, 0x12, 0x18, 0xbe, 0xef, 0x16, 0x86, 0xe0, 0xec,
+  };
+  uint8_t hkdf_output[sizeof(kHKDFOutput)];
+  if (!HKDF(hkdf_output, sizeof(hkdf_output), EVP_sha256(), kHKDFSecret,
+            sizeof(kHKDFSecret), kHKDFSalt, sizeof(kHKDFSalt), kHKDFInfo,
+            sizeof(kHKDFInfo)) ||
+      !check_test(kHKDFOutput, hkdf_output, sizeof(kHKDFOutput), "HKDF")) {
+    fprintf(stderr, "HKDF failed.\n");
+    goto err;
+  }
+
   ret = 1;
 
 err:

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/tls/internal.h

@@ -31,6 +31,14 @@ OPENSSL_EXPORT int CRYPTO_tls1_prf(const EVP_MD *digest,
                                    const uint8_t *seed1, size_t seed1_len,
                                    const uint8_t *seed2, size_t seed2_len);
 
+// CRYPTO_tls13_hkdf_expand_label computes the TLS 1.3 KDF function of the same
+// name. See https://www.rfc-editor.org/rfc/rfc8446#section-7.1.
+OPENSSL_EXPORT int CRYPTO_tls13_hkdf_expand_label(
+    uint8_t *out, size_t out_len, const EVP_MD *digest,  //
+    const uint8_t *secret, size_t secret_len,            //
+    const uint8_t *label, size_t label_len,              //
+    const uint8_t *hash, size_t hash_len);
+
 
 #if defined(__cplusplus)
 }

data/third_party/boringssl-with-bazel/src/crypto/fipsmodule/tls/kdf.c

@@ -52,7 +52,9 @@
 
 #include <assert.h>
 
+#include <openssl/bytestring.h>
 #include <openssl/digest.h>
+#include <openssl/hkdf.h>
 #include <openssl/hmac.h>
 #include <openssl/mem.h>
 
@@ -176,3 +178,34 @@ end:
   }
   return ret;
 }
+
+int CRYPTO_tls13_hkdf_expand_label(uint8_t *out, size_t out_len,
+                                   const EVP_MD *digest,  //
+                                   const uint8_t *secret, size_t secret_len,
+                                   const uint8_t *label, size_t label_len,
+                                   const uint8_t *hash, size_t hash_len) {
+  static const uint8_t kProtocolLabel[] = "tls13 ";
+  CBB cbb, child;
+  uint8_t *hkdf_label = NULL;
+  size_t hkdf_label_len;
+
+  CBB_zero(&cbb);
+  if (!CBB_init(&cbb, 2 + 1 + sizeof(kProtocolLabel) - 1 + label_len + 1 +
+                          hash_len) ||
+      !CBB_add_u16(&cbb, out_len) ||
+      !CBB_add_u8_length_prefixed(&cbb, &child) ||
+      !CBB_add_bytes(&child, kProtocolLabel, sizeof(kProtocolLabel) - 1) ||
+      !CBB_add_bytes(&child, label, label_len) ||
+      !CBB_add_u8_length_prefixed(&cbb, &child) ||
+      !CBB_add_bytes(&child, hash, hash_len) ||
+      !CBB_finish(&cbb, &hkdf_label, &hkdf_label_len)) {
+    CBB_cleanup(&cbb);
+    return 0;
+  }
+
+  const int ret = HKDF_expand(out, out_len, digest, secret, secret_len,
+                              hkdf_label, hkdf_label_len);
+  OPENSSL_free(hkdf_label);
+  return ret;
+}
+