grpc 1.50.0 → 1.56.0

data/third_party/boringssl-with-bazel/src/include/openssl/ssl.h

@@ -157,11 +157,6 @@
 #include <sys/time.h>
 #endif
 
-// NGINX needs this #include. Consider revisiting this after NGINX 1.14.0 has
-// been out for a year or so (assuming that they fix it in that release.) See
-// https://boringssl-review.googlesource.com/c/boringssl/+/21664.
-#include <openssl/hmac.h>
-
 // Forward-declare struct timeval. On Windows, it is defined in winsock2.h and
 // Windows headers define too many macros to be included in public headers.
 // However, only a forward declaration is needed.
@@ -1086,6 +1081,21 @@ OPENSSL_EXPORT int SSL_set_ocsp_response(SSL *ssl,
 OPENSSL_EXPORT const char *SSL_get_signature_algorithm_name(uint16_t sigalg,
                                                             int include_curve);
 
+// SSL_get_all_signature_algorithm_names outputs a list of possible strings
+// |SSL_get_signature_algorithm_name| may return in this version of BoringSSL.
+// It writes at most |max_out| entries to |out| and returns the total number it
+// would have written, if |max_out| had been large enough. |max_out| may be
+// initially set to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_signature_algorithm_names(const char **out,
+                                                            size_t max_out);
+
 // SSL_get_signature_algorithm_key_type returns the key type associated with
 // |sigalg| as an |EVP_PKEY_*| constant or |EVP_PKEY_NONE| if unknown.
 OPENSSL_EXPORT int SSL_get_signature_algorithm_key_type(uint16_t sigalg);
@@ -1399,6 +1409,37 @@ OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher);
 OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
                                        int *out_alg_bits);
 
+// SSL_get_all_cipher_names outputs a list of possible strings
+// |SSL_CIPHER_get_name| may return in this version of BoringSSL. It writes at
+// most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_cipher_names(const char **out,
+                                               size_t max_out);
+
+
+// SSL_get_all_standard_cipher_names outputs a list of possible strings
+// |SSL_CIPHER_standard_name| may return in this version of BoringSSL. It writes
+// at most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_standard_cipher_names(const char **out,
+                                                        size_t max_out);
+
 
 // Cipher suite configuration.
 //
@@ -1435,7 +1476,8 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 // Available cipher rules are:
 //
-//   |ALL| matches all ciphers.
+//   |ALL| matches all ciphers, except for deprecated ciphers which must be
+//   named explicitly.
 //
 //   |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE,
 //   ECDHE, and plain PSK key exchanges, respectively. Note that ECDHE_PSK is
@@ -1454,9 +1496,6 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 //   |SHA1|, and its alias |SHA|, match legacy cipher suites using HMAC-SHA1.
 //
-// Although implemented, authentication-only ciphers match no rules and must be
-// explicitly selected by name.
-//
 // Deprecated cipher rules:
 //
 //   |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|,
@@ -1495,8 +1534,7 @@ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher,
 //
 // TLS 1.3 ciphers do not participate in this mechanism and instead have a
 // built-in preference order. Functions to set cipher lists do not affect TLS
-// 1.3, and functions to query the cipher list do not include TLS 1.3
-// ciphers.
+// 1.3, and functions to query the cipher list do not include TLS 1.3 ciphers.
 
 // SSL_DEFAULT_CIPHER_LIST is the default cipher suite configuration. It is
 // substituted when a cipher string starts with 'DEFAULT'.
@@ -2281,6 +2319,17 @@ OPENSSL_EXPORT void SSL_CTX_set_ticket_aead_method(
 OPENSSL_EXPORT SSL_SESSION *SSL_process_tls13_new_session_ticket(
     SSL *ssl, const uint8_t *buf, size_t buf_len);
 
+// SSL_CTX_set_num_tickets configures |ctx| to send |num_tickets| immediately
+// after a successful TLS 1.3 handshake as a server. It returns one. Large
+// values of |num_tickets| will be capped within the library.
+//
+// By default, BoringSSL sends two tickets.
+OPENSSL_EXPORT int SSL_CTX_set_num_tickets(SSL_CTX *ctx, size_t num_tickets);
+
+// SSL_CTX_get_num_tickets returns the number of tickets |ctx| will send
+// immediately after a successful TLS 1.3 handshake as a server.
+OPENSSL_EXPORT size_t SSL_CTX_get_num_tickets(const SSL_CTX *ctx);
+
 
 // Elliptic curve Diffie-Hellman.
 //
@@ -2328,7 +2377,7 @@ OPENSSL_EXPORT int SSL_set1_curves_list(SSL *ssl, const char *curves);
 #define SSL_CURVE_SECP384R1 24
 #define SSL_CURVE_SECP521R1 25
 #define SSL_CURVE_X25519 29
-#define SSL_CURVE_CECPQ2 16696
+#define SSL_CURVE_X25519_KYBER768_DRAFT00 0x6399
 
 // SSL_get_curve_id returns the ID of the curve used by |ssl|'s most recently
 // completed handshake or 0 if not applicable.
@@ -2341,6 +2390,34 @@ OPENSSL_EXPORT uint16_t SSL_get_curve_id(const SSL *ssl);
 // the given TLS curve id, or NULL if the curve is unknown.
 OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id);
 
+// SSL_get_all_curve_names outputs a list of possible strings
+// |SSL_get_curve_name| may return in this version of BoringSSL. It writes at
+// most |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_curve_names(const char **out, size_t max_out);
+
+// SSL_CTX_set1_groups calls |SSL_CTX_set1_curves|.
+OPENSSL_EXPORT int SSL_CTX_set1_groups(SSL_CTX *ctx, const int *groups,
+                                       size_t groups_len);
+
+// SSL_set1_groups calls |SSL_set1_curves|.
+OPENSSL_EXPORT int SSL_set1_groups(SSL *ssl, const int *groups,
+                                   size_t groups_len);
+
+// SSL_CTX_set1_groups_list calls |SSL_CTX_set1_curves_list|.
+OPENSSL_EXPORT int SSL_CTX_set1_groups_list(SSL_CTX *ctx, const char *groups);
+
+// SSL_set1_groups_list calls |SSL_set1_curves_list|.
+OPENSSL_EXPORT int SSL_set1_groups_list(SSL *ssl, const char *groups);
+
 
 // Certificate verification.
 //
@@ -2389,21 +2466,51 @@ OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id);
 
 // SSL_CTX_set_verify configures certificate verification behavior. |mode| is
 // one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is
-// used to customize certificate verification. See the behavior of
-// |X509_STORE_CTX_set_verify_cb|.
+// used to customize certificate verification, but is deprecated. See
+// |X509_STORE_CTX_set_verify_cb| for details.
 //
 // The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
 // |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| should be NULL. This callback does not replace the
+// default certificate verification process and is, instead, called multiple
+// times in the course of that process. It is very difficult to implement this
+// callback safely, without inadvertently relying on implementation details or
+// making incorrect assumptions about when the callback is called.
+//
+// Instead, use |SSL_CTX_set_custom_verify| or
+// |SSL_CTX_set_cert_verify_callback| to customize certificate verification.
+// Those callbacks can inspect the peer-sent chain, call |X509_verify_cert| and
+// inspect the result, or perform other operations more straightforwardly.
+//
+// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
+// haven't documented it yet. Later that will have a more detailed warning about
+// why one should not use this callback.
 OPENSSL_EXPORT void SSL_CTX_set_verify(
     SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx));
 
 // SSL_set_verify configures certificate verification behavior. |mode| is one of
 // the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to
-// customize certificate verification. See the behavior of
+// customize certificate verification, but is deprecated. See the behavior of
 // |X509_STORE_CTX_set_verify_cb|.
 //
 // The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with
 // |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|.
+//
+// WARNING: |callback| should be NULL. This callback does not replace the
+// default certificate verification process and is, instead, called multiple
+// times in the course of that process. It is very difficult to implement this
+// callback safely, without inadvertently relying on implementation details or
+// making incorrect assumptions about when the callback is called.
+//
+// Instead, use |SSL_set_custom_verify| or |SSL_CTX_set_cert_verify_callback| to
+// customize certificate verification. Those callbacks can inspect the peer-sent
+// chain, call |X509_verify_cert| and inspect the result, or perform other
+// operations more straightforwardly.
+//
+// TODO(crbug.com/boringssl/426): We cite |X509_STORE_CTX_set_verify_cb| but
+// haven't documented it yet. Later that will have a more detailed warning about
+// why one should not use this callback.
 OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode,
                                    int (*callback)(int ok,
                                                    X509_STORE_CTX *store_ctx));
@@ -2459,6 +2566,15 @@ OPENSSL_EXPORT int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(
 OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *ssl))(
     int ok, X509_STORE_CTX *store_ctx);
 
+// SSL_set1_host sets a DNS name that will be required to be present in the
+// verified leaf certificate. It returns one on success and zero on error.
+//
+// Note: unless _some_ name checking is performed, certificate validation is
+// ineffective. Simply checking that a host has some certificate from a CA is
+// rarely meaningful—you have to check that the CA believed that the host was
+// who you expect to be talking to.
+OPENSSL_EXPORT int SSL_set1_host(SSL *ssl, const char *hostname);
+
 // SSL_CTX_set_verify_depth sets the maximum depth of a certificate chain
 // accepted in verification. This number does not include the leaf, so a depth
 // of 1 allows the leaf and one CA certificate.
@@ -2632,6 +2748,11 @@ OPENSSL_EXPORT int SSL_set_verify_algorithm_prefs(SSL *ssl,
                                                   const uint16_t *prefs,
                                                   size_t num_prefs);
 
+// SSL_set_hostflags calls |X509_VERIFY_PARAM_set_hostflags| on the
+// |X509_VERIFY_PARAM| associated with this |SSL*|. The |flags| argument
+// should be one of the |X509_CHECK_*| constants.
+OPENSSL_EXPORT void SSL_set_hostflags(SSL *ssl, unsigned flags);
+
 
 // Client certificate CA list.
 //
@@ -2697,7 +2818,7 @@ OPENSSL_EXPORT int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x509);
 
 // SSL_load_client_CA_file opens |file| and reads PEM-encoded certificates from
 // it. It returns a newly-allocated stack of the certificate subjects or NULL
-// on error.
+// on error. Duplicates in |file| are ignored.
 OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file);
 
 // SSL_dup_CA_list makes a deep copy of |list|. It returns the new list on
@@ -2710,6 +2831,11 @@ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *list);
 OPENSSL_EXPORT int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *out,
                                                        const char *file);
 
+// SSL_add_bio_cert_subjects_to_stack behaves like
+// |SSL_add_file_cert_subjects_to_stack| but reads from |bio|.
+OPENSSL_EXPORT int SSL_add_bio_cert_subjects_to_stack(STACK_OF(X509_NAME) *out,
+                                                      BIO *bio);
+
 
 // Server name indication.
 //
@@ -2788,7 +2914,7 @@ OPENSSL_EXPORT SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx);
 // WARNING: this function is dangerous because it breaks the usual return value
 // convention.
 OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos,
-                                           unsigned protos_len);
+                                           size_t protos_len);
 
 // SSL_set_alpn_protos sets the client ALPN protocol list on |ssl| to |protos|.
 // |protos| must be in wire-format (i.e. a series of non-empty, 8-bit
@@ -2799,7 +2925,7 @@ OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos,
 // WARNING: this function is dangerous because it breaks the usual return value
 // convention.
 OPENSSL_EXPORT int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos,
-                                       unsigned protos_len);
+                                       size_t protos_len);
 
 // SSL_CTX_set_alpn_select_cb sets a callback function on |ctx| that is called
 // during ClientHello processing in order to select an ALPN protocol from the
@@ -3887,13 +4013,14 @@ OPENSSL_EXPORT int SSL_get_ivs(const SSL *ssl, const uint8_t **out_read_iv,
                                const uint8_t **out_write_iv,
                                size_t *out_iv_len);
 
-// SSL_get_key_block_len returns the length of |ssl|'s key block. It is an error
-// to call this function during a handshake.
+// SSL_get_key_block_len returns the length of |ssl|'s key block, for TLS 1.2
+// and below. It is an error to call this function during a handshake, or if
+// |ssl| negotiated TLS 1.3.
 OPENSSL_EXPORT size_t SSL_get_key_block_len(const SSL *ssl);
 
 // SSL_generate_key_block generates |out_len| bytes of key material for |ssl|'s
-// current connection state. It is an error to call this function during a
-// handshake.
+// current connection state, for TLS 1.2 and below. It is an error to call this
+// function during a handshake, or if |ssl| negotiated TLS 1.3.
 OPENSSL_EXPORT int SSL_generate_key_block(const SSL *ssl, uint8_t *out,
                                           size_t out_len);
 
@@ -3947,8 +4074,9 @@ OPENSSL_EXPORT int SSL_CTX_set_record_protocol_version(SSL_CTX *ctx,
 // those cases, BoringSSL will not predict a signature as there is no benefit.
 // Callers must allow for handshakes to complete without a predicted signature.
 //
-// For now, only TLS 1.3 is hinted. TLS 1.2 will work, but the hints will be
-// empty.
+// Handshake hints are supported for TLS 1.3 and partially supported for
+// TLS 1.2. TLS 1.2 resumption handshakes are not yet fully hinted. They will
+// still work, but may not be as efficient.
 
 // SSL_serialize_capabilities writes an opaque byte string to |out| describing
 // some of |ssl|'s capabilities. It returns one on success and zero on error.
@@ -4025,10 +4153,16 @@ OPENSSL_EXPORT int SSL_set_handshake_hints(SSL *ssl, const uint8_t *hints,
 // |len| bytes from |buf| contain the handshake message, one-byte
 // ChangeCipherSpec body, and two-byte alert, respectively.
 //
+// In connections that enable ECH, |cb| is additionally called with
+// |content_type| = |SSL3_RT_CLIENT_HELLO_INNER| for each ClientHelloInner that
+// is encrypted or decrypted. The |len| bytes from |buf| contain the
+// ClientHelloInner, including the reconstructed outer extensions and handshake
+// header.
+//
 // For a V2ClientHello, |version| is |SSL2_VERSION|, |content_type| is zero, and
 // the |len| bytes from |buf| contain the V2ClientHello structure.
 OPENSSL_EXPORT void SSL_CTX_set_msg_callback(
-    SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type,
+    SSL_CTX *ctx, void (*cb)(int is_write, int version, int content_type,
                              const void *buf, size_t len, SSL *ssl, void *arg));
 
 // SSL_CTX_set_msg_callback_arg sets the |arg| parameter of the message
@@ -4098,6 +4232,13 @@ enum ssl_renegotiate_mode_t BORINGSSL_ENUM_INT {
 // renegotiation attempts by a server. If |ssl| is a server, peer-initiated
 // renegotiations are *always* rejected and this function does nothing.
 //
+// WARNING: Renegotiation is error-prone, complicates TLS's security properties,
+// and increases its attack surface. When enabled, many common assumptions about
+// BoringSSL's behavior no longer hold, and the calling application must handle
+// more cases. Renegotiation is also incompatible with many application
+// protocols, e.g. section 9.2.1 of RFC 7540. Many functions behave in ambiguous
+// or undefined ways during a renegotiation.
+//
 // The renegotiation mode defaults to |ssl_renegotiate_never|, but may be set
 // at any point in a connection's lifetime. Set it to |ssl_renegotiate_once| to
 // allow one renegotiation, |ssl_renegotiate_freely| to allow all
@@ -4119,6 +4260,20 @@ enum ssl_renegotiate_mode_t BORINGSSL_ENUM_INT {
 // e.g., ALPN must enable renegotiation before the handshake and conditionally
 // disable it afterwards.
 //
+// When enabled, renegotiation can cause properties of |ssl|, such as the cipher
+// suite, to change during the lifetime of the connection. More over, during a
+// renegotiation, not all properties of the new handshake are available or fully
+// established. In BoringSSL, most functions, such as |SSL_get_current_cipher|,
+// report information from the most recently completed handshake, not the
+// pending one. However, renegotiation may rerun handshake callbacks, such as
+// |SSL_CTX_set_cert_cb|. Such callbacks must ensure they are acting on the
+// desired versions of each property.
+//
+// BoringSSL does not reverify peer certificates on renegotiation and instead
+// requires they match between handshakes, so certificate verification callbacks
+// (see |SSL_CTX_set_custom_verify|) may assume |ssl| is in the initial
+// handshake and use |SSL_get0_peer_certificates|, etc.
+//
 // There is no support in BoringSSL for initiating renegotiations as a client
 // or server.
 OPENSSL_EXPORT void SSL_set_renegotiate_mode(SSL *ssl,
@@ -4254,12 +4409,24 @@ OPENSSL_EXPORT void SSL_CTX_set_dos_protection_cb(
 // respected on clients.
 OPENSSL_EXPORT void SSL_CTX_set_reverify_on_resume(SSL_CTX *ctx, int enabled);
 
-// SSL_set_enforce_rsa_key_usage configures whether the keyUsage extension of
-// RSA leaf certificates will be checked for consistency with the TLS
-// usage. This parameter may be set late; it will not be read until after the
+// SSL_set_enforce_rsa_key_usage configures whether, when |ssl| is a client
+// negotiating TLS 1.2 or below, the keyUsage extension of RSA leaf server
+// certificates will be checked for consistency with the TLS usage. In all other
+// cases, this check is always enabled.
+//
+// This parameter may be set late; it will not be read until after the
 // certificate verification callback.
 OPENSSL_EXPORT void SSL_set_enforce_rsa_key_usage(SSL *ssl, int enabled);
 
+// SSL_was_key_usage_invalid returns one if |ssl|'s handshake succeeded despite
+// using TLS parameters which were incompatible with the leaf certificate's
+// keyUsage extension. Otherwise, it returns zero.
+//
+// If |SSL_set_enforce_rsa_key_usage| is enabled or not applicable, this
+// function will always return zero because key usages will be consistently
+// checked.
+OPENSSL_EXPORT int SSL_was_key_usage_invalid(const SSL *ssl);
+
 // SSL_ST_* are possible values for |SSL_state|, the bitmasks that make them up,
 // and some historical values for compatibility. Only |SSL_ST_INIT| and
 // |SSL_ST_OK| are ever returned.
@@ -4446,13 +4613,6 @@ OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher,
 // SSL_CIPHER_get_version returns the string "TLSv1/SSLv3".
 OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher);
 
-// SSL_CIPHER_get_rfc_name returns a newly-allocated string containing the
-// result of |SSL_CIPHER_standard_name| or NULL on error. The caller is
-// responsible for calling |OPENSSL_free| on the result.
-//
-// Use |SSL_CIPHER_standard_name| instead.
-OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher);
-
 typedef void COMP_METHOD;
 typedef struct ssl_comp_st SSL_COMP;
 
@@ -4791,6 +4951,21 @@ OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *ssl);
 // For example, "TLSv1.2" or "DTLSv1".
 OPENSSL_EXPORT const char *SSL_get_version(const SSL *ssl);
 
+// SSL_get_all_version_names outputs a list of possible strings
+// |SSL_get_version| may return in this version of BoringSSL. It writes at most
+// |max_out| entries to |out| and returns the total number it would have
+// written, if |max_out| had been large enough. |max_out| may be initially set
+// to zero to size the output.
+//
+// This function is only intended to help initialize tables in callers that want
+// possible strings pre-declared. This list would not be suitable to set a list
+// of supported features. It is in no particular order, and may contain
+// placeholder, experimental, or deprecated values that do not apply to every
+// caller. Future versions of BoringSSL may also return strings not in this
+// list, so this does not apply if, say, sending strings across services.
+OPENSSL_EXPORT size_t SSL_get_all_version_names(const char **out,
+                                                size_t max_out);
+
 // SSL_get_cipher_list returns the name of the |n|th cipher in the output of
 // |SSL_get_ciphers| or NULL if out of range. Use |SSL_get_ciphers| instead.
 OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *ssl, int n);
@@ -5077,6 +5252,68 @@ OPENSSL_EXPORT int SSL_CTX_set_tlsext_status_arg(SSL_CTX *ctx, void *arg);
 OPENSSL_EXPORT uint16_t SSL_CIPHER_get_value(const SSL_CIPHER *cipher);
 
 
+// Compliance policy configurations
+//
+// A TLS connection has a large number of different parameters. Some are well
+// known, like cipher suites, but many are obscure and configuration functions
+// for them may not exist. These policy controls allow broad configuration
+// goals to be specified so that they can flow down to all the different
+// parameters of a TLS connection.
+
+enum ssl_compliance_policy_t BORINGSSL_ENUM_INT {
+  // ssl_compliance_policy_none does nothing. However, since setting this
+  // doesn't undo other policies it's an error to try and set it.
+  ssl_compliance_policy_none,
+
+  // ssl_policy_fips_202205 configures a TLS connection to use:
+  //   * TLS 1.2 or 1.3
+  //   * For TLS 1.2, only ECDHE_[RSA|ECDSA]_WITH_AES_*_GCM_SHA*.
+  //   * For TLS 1.3, only AES-GCM
+  //   * P-256 or P-384 for key agreement.
+  //   * For server signatures, only PKCS#1/PSS with SHA256/384/512, or ECDSA
+  //     with P-256 or P-384.
+  //
+  // Note: this policy can be configured even if BoringSSL has not been built in
+  // FIPS mode. Call |FIPS_mode| to check that.
+  //
+  // Note: this setting aids with compliance with NIST requirements but does not
+  // guarantee it. Careful reading of SP 800-52r2 is recommended.
+  ssl_compliance_policy_fips_202205,
+
+  // ssl_compliance_policy_wpa3_192_202304 configures a TLS connection to use:
+  //   * TLS 1.2 or 1.3.
+  //   * For TLS 1.2, only TLS_ECDHE_[ECDSA|RSA]_WITH_AES_256_GCM_SHA384.
+  //   * For TLS 1.3, only AES-256-GCM.
+  //   * P-384 for key agreement.
+  //   * For handshake signatures, only ECDSA with P-384 and SHA-384, or RSA
+  //     with SHA-384 or SHA-512.
+  //
+  // No limitations on the certificate chain nor leaf public key are imposed,
+  // other than by the supported signature algorithms. But WPA3's "192-bit"
+  // mode requires at least P-384 or 3072-bit along the chain. The caller must
+  // enforce this themselves on the verified chain using functions such as
+  // `X509_STORE_CTX_get0_chain`.
+  //
+  // Note that this setting is less secure than the default. The
+  // implementation risks of using a more obscure primitive like P-384
+  // dominate other considerations.
+  ssl_compliance_policy_wpa3_192_202304,
+};
+
+// SSL_CTX_set_compliance_policy configures various aspects of |ctx| based on
+// the given policy requirements. Subsequently calling other functions that
+// configure |ctx| may override |policy|, or may not. This should be the final
+// configuration function called in order to have defined behaviour. It's a
+// fatal error if |policy| is |ssl_compliance_policy_none|.
+OPENSSL_EXPORT int SSL_CTX_set_compliance_policy(
+    SSL_CTX *ctx, enum ssl_compliance_policy_t policy);
+
+// SSL_set_compliance_policy acts the same as |SSL_CTX_set_compliance_policy|,
+// but only configures a single |SSL*|.
+OPENSSL_EXPORT int SSL_set_compliance_policy(
+    SSL *ssl, enum ssl_compliance_policy_t policy);
+
+
 // Nodejs compatibility section (hidden).
 //
 // These defines exist for node.js, with the hope that we can eliminate the
@@ -5243,62 +5480,6 @@ BORINGSSL_MAKE_UP_REF(SSL_ECH_KEYS, SSL_ECH_KEYS_up_ref)
 BORINGSSL_MAKE_DELETER(SSL_SESSION, SSL_SESSION_free)
 BORINGSSL_MAKE_UP_REF(SSL_SESSION, SSL_SESSION_up_ref)
 
-enum class OpenRecordResult {
-  kOK,
-  kDiscard,
-  kIncompleteRecord,
-  kAlertCloseNotify,
-  kError,
-};
-
-//  *** EXPERIMENTAL -- DO NOT USE ***
-//
-// OpenRecord decrypts the first complete SSL record from |in| in-place, sets
-// |out| to the decrypted application data, and |out_record_len| to the length
-// of the encrypted record. Returns:
-// - kOK if an application-data record was successfully decrypted and verified.
-// - kDiscard if a record was sucessfully processed, but should be discarded.
-// - kIncompleteRecord if |in| did not contain a complete record.
-// - kAlertCloseNotify if a record was successfully processed but is a
-//   close_notify alert.
-// - kError if an error occurred or the record is invalid. |*out_alert| will be
-//   set to an alert to emit, or zero if no alert should be emitted.
-OPENSSL_EXPORT OpenRecordResult OpenRecord(SSL *ssl, Span<uint8_t> *out,
-                                           size_t *out_record_len,
-                                           uint8_t *out_alert,
-                                           Span<uint8_t> in);
-
-OPENSSL_EXPORT size_t SealRecordPrefixLen(const SSL *ssl, size_t plaintext_len);
-
-// SealRecordSuffixLen returns the length of the suffix written by |SealRecord|.
-//
-// |plaintext_len| must be equal to the size of the plaintext passed to
-// |SealRecord|.
-//
-// |plaintext_len| must not exceed |SSL3_RT_MAX_PLAINTEXT_LENGTH|. The returned
-// suffix length will not exceed |SSL3_RT_MAX_ENCRYPTED_OVERHEAD|.
-OPENSSL_EXPORT size_t SealRecordSuffixLen(const SSL *ssl, size_t plaintext_len);
-
-//  *** EXPERIMENTAL -- DO NOT USE ***
-//
-// SealRecord encrypts the cleartext of |in| and scatters the resulting TLS
-// application data record between |out_prefix|, |out|, and |out_suffix|. It
-// returns true on success or false if an error occurred.
-//
-// The length of |out_prefix| must equal |SealRecordPrefixLen|. The length of
-// |out| must equal the length of |in|, which must not exceed
-// |SSL3_RT_MAX_PLAINTEXT_LENGTH|. The length of |out_suffix| must equal
-// |SealRecordSuffixLen|.
-//
-// If enabled, |SealRecord| may perform TLS 1.0 CBC 1/n-1 record splitting.
-// |SealRecordPrefixLen| accounts for the required overhead if that is the case.
-//
-// |out| may equal |in| to encrypt in-place but may not otherwise alias.
-// |out_prefix| and |out_suffix| may not alias anything.
-OPENSSL_EXPORT bool SealRecord(SSL *ssl, Span<uint8_t> out_prefix,
-                               Span<uint8_t> out, Span<uint8_t> out_suffix,
-                               Span<const uint8_t> in);
-
 
 // *** EXPERIMENTAL — DO NOT USE WITHOUT CHECKING ***
 //
@@ -5356,6 +5537,18 @@ OPENSSL_EXPORT bool SSL_get_traffic_secrets(
     const SSL *ssl, Span<const uint8_t> *out_read_traffic_secret,
     Span<const uint8_t> *out_write_traffic_secret);
 
+// SSL_CTX_set_aes_hw_override_for_testing sets |override_value| to
+// override checking for aes hardware support for testing. If |override_value|
+// is set to true, the library will behave as if aes hardware support is
+// present. If it is set to false, the library will behave as if aes hardware
+// support is not present.
+OPENSSL_EXPORT void SSL_CTX_set_aes_hw_override_for_testing(
+    SSL_CTX *ctx, bool override_value);
+
+// SSL_set_aes_hw_override_for_testing acts the same as
+// |SSL_CTX_set_aes_override_for_testing| but only configures a single |SSL*|.
+OPENSSL_EXPORT void SSL_set_aes_hw_override_for_testing(SSL *ssl,
+                                                        bool override_value);
 
 BSSL_NAMESPACE_END
 
@@ -5584,7 +5777,7 @@ BSSL_NAMESPACE_END
 #define SSL_R_INVALID_ECH_PUBLIC_NAME 317
 #define SSL_R_INVALID_ECH_CONFIG_LIST 318
 #define SSL_R_ECH_REJECTED 319
-#define SSL_R_OUTER_EXTENSION_NOT_FOUND 320
+#define SSL_R_INVALID_OUTER_EXTENSION 320
 #define SSL_R_INCONSISTENT_ECH_NEGOTIATION 321
 #define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000
 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010

data/third_party/boringssl-with-bazel/src/include/openssl/ssl3.h

@@ -1,4 +1,3 @@
-/* ssl/ssl3.h */
 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
@@ -118,7 +117,6 @@
 #define OPENSSL_HEADER_SSL3_H
 
 #include <openssl/aead.h>
-#include <openssl/type_check.h>
 
 #ifdef  __cplusplus
 extern "C" {
@@ -251,10 +249,6 @@ extern "C" {
 #define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \
     (EVP_AEAD_MAX_OVERHEAD + EVP_AEAD_MAX_NONCE_LENGTH)
 
-OPENSSL_STATIC_ASSERT(SSL3_RT_MAX_ENCRYPTED_OVERHEAD >=
-                          SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD,
-                      "max overheads are inconsistent");
-
 // SSL3_RT_MAX_COMPRESSED_LENGTH is an alias for
 // |SSL3_RT_MAX_PLAIN_LENGTH|. Compression is gone, so don't include the
 // compression overhead.
@@ -275,6 +269,7 @@ OPENSSL_STATIC_ASSERT(SSL3_RT_MAX_ENCRYPTED_OVERHEAD >=
 
 // Pseudo content type for SSL/TLS header info
 #define SSL3_RT_HEADER 0x100
+#define SSL3_RT_CLIENT_HELLO_INNER 0x101
 
 #define SSL3_AL_WARNING 1
 #define SSL3_AL_FATAL 2