grpc 1.50.0 → 1.52.0.pre2

data/third_party/re2/re2/walker-inl.h

@@ -148,7 +148,8 @@ template<typename T> void Regexp::Walker<T>::Reset() {
   if (!stack_.empty()) {
     LOG(DFATAL) << "Stack not empty.";
     while (!stack_.empty()) {
-      delete[] stack_.top().child_args;
+      if (stack_.top().re->nsub_ > 1)
+        delete[] stack_.top().child_args;
       stack_.pop();
     }
   }
@@ -169,7 +170,7 @@ template<typename T> T Regexp::Walker<T>::WalkInternal(Regexp* re, T top_arg,
   for (;;) {
     T t;
     s = &stack_.top();
-    Regexp* re = s->re;
+    re = s->re;
     switch (s->n) {
       case -1: {
         if (--max_visits_ < 0) {

data/third_party/re2/util/mutex.h

@@ -33,8 +33,8 @@ typedef SRWLOCK MutexType;
 #include <stdlib.h>
 typedef pthread_rwlock_t MutexType;
 #else
-#include <mutex>
-typedef std::mutex MutexType;
+#include <shared_mutex>
+typedef std::shared_mutex MutexType;
 #endif
 
 namespace re2 {
@@ -95,8 +95,8 @@ Mutex::Mutex()             { }
 Mutex::~Mutex()            { }
 void Mutex::Lock()         { mutex_.lock(); }
 void Mutex::Unlock()       { mutex_.unlock(); }
-void Mutex::ReaderLock()   { Lock(); }  // C++11 doesn't have std::shared_mutex.
-void Mutex::ReaderUnlock() { Unlock(); }
+void Mutex::ReaderLock()   { mutex_.lock_shared(); }
+void Mutex::ReaderUnlock() { mutex_.unlock_shared(); }
 
 #endif
 

data/third_party/zlib/compress.c

@@ -19,7 +19,7 @@
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
-int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+int ZEXPORT compress2(dest, destLen, source, sourceLen, level)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
@@ -65,7 +65,7 @@ int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
 
 /* ===========================================================================
  */
-int ZEXPORT compress (dest, destLen, source, sourceLen)
+int ZEXPORT compress(dest, destLen, source, sourceLen)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
@@ -78,7 +78,7 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
      If the default memLevel or windowBits for deflateInit() is changed, then
    this function needs to be updated.
  */
-uLong ZEXPORT compressBound (sourceLen)
+uLong ZEXPORT compressBound(sourceLen)
     uLong sourceLen;
 {
     return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +

data/third_party/zlib/crc32.c

@@ -98,13 +98,22 @@
 #  endif
 #endif
 
+/* If available, use the ARM processor CRC32 instruction. */
+#if defined(__aarch64__) && defined(__ARM_FEATURE_CRC32) && W == 8
+#  define ARMCRC32
+#endif
+
 /* Local functions. */
 local z_crc_t multmodp OF((z_crc_t a, z_crc_t b));
 local z_crc_t x2nmodp OF((z_off64_t n, unsigned k));
 
-/* If available, use the ARM processor CRC32 instruction. */
-#if defined(__aarch64__) && defined(__ARM_FEATURE_CRC32) && W == 8
-#  define ARMCRC32
+#if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
+    local z_word_t byte_swap OF((z_word_t word));
+#endif
+
+#if defined(W) && !defined(ARMCRC32)
+    local z_crc_t crc_word OF((z_word_t data));
+    local z_word_t crc_word_big OF((z_word_t data));
 #endif
 
 #if defined(W) && (!defined(ARMCRC32) || defined(DYNAMIC_CRC_TABLE))
@@ -630,7 +639,7 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
 #endif /* DYNAMIC_CRC_TABLE */
 
     /* Pre-condition the CRC */
-    crc ^= 0xffffffff;
+    crc = (~crc) & 0xffffffff;
 
     /* Compute the CRC up to a word boundary. */
     while (len && ((z_size_t)buf & 7) != 0) {
@@ -645,8 +654,8 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
     len &= 7;
 
     /* Do three interleaved CRCs to realize the throughput of one crc32x
-       instruction per cycle. Each CRC is calcuated on Z_BATCH words. The three
-       CRCs are combined into a single CRC after each set of batches. */
+       instruction per cycle. Each CRC is calculated on Z_BATCH words. The
+       three CRCs are combined into a single CRC after each set of batches. */
     while (num >= 3 * Z_BATCH) {
         crc1 = 0;
         crc2 = 0;
@@ -749,7 +758,7 @@ unsigned long ZEXPORT crc32_z(crc, buf, len)
 #endif /* DYNAMIC_CRC_TABLE */
 
     /* Pre-condition the CRC */
-    crc ^= 0xffffffff;
+    crc = (~crc) & 0xffffffff;
 
 #ifdef W
 
@@ -1077,7 +1086,7 @@ uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
 #ifdef DYNAMIC_CRC_TABLE
     once(&made, make_crc_table);
 #endif /* DYNAMIC_CRC_TABLE */
-    return multmodp(x2nmodp(len2, 3), crc1) ^ crc2;
+    return multmodp(x2nmodp(len2, 3), crc1) ^ (crc2 & 0xffffffff);
 }
 
 /* ========================================================================= */
@@ -1086,7 +1095,7 @@ uLong ZEXPORT crc32_combine(crc1, crc2, len2)
     uLong crc2;
     z_off_t len2;
 {
-    return crc32_combine64(crc1, crc2, len2);
+    return crc32_combine64(crc1, crc2, (z_off64_t)len2);
 }
 
 /* ========================================================================= */
@@ -1103,14 +1112,14 @@ uLong ZEXPORT crc32_combine_gen64(len2)
 uLong ZEXPORT crc32_combine_gen(len2)
     z_off_t len2;
 {
-    return crc32_combine_gen64(len2);
+    return crc32_combine_gen64((z_off64_t)len2);
 }
 
 /* ========================================================================= */
-uLong crc32_combine_op(crc1, crc2, op)
+uLong ZEXPORT crc32_combine_op(crc1, crc2, op)
     uLong crc1;
     uLong crc2;
     uLong op;
 {
-    return multmodp(op, crc1) ^ crc2;
+    return multmodp(op, crc1) ^ (crc2 & 0xffffffff);
 }