grpc 1.49.0.pre1-x64-mingw-ucrt

data/src/ruby/lib/grpc/generic/bidi_call.rb

@@ -0,0 +1,233 @@
+# Copyright 2015 gRPC authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+require 'forwardable'
+require_relative '../grpc'
+
+# GRPC contains the General RPC module.
+module GRPC
+  # The BiDiCall class orchestrates execution of a BiDi stream on a client or
+  # server.
+  class BidiCall
+    include Core::CallOps
+    include Core::StatusCodes
+    include Core::TimeConsts
+
+    # Creates a BidiCall.
+    #
+    # BidiCall should only be created after a call is accepted.  That means
+    # different things on a client and a server.  On the client, the call is
+    # accepted after call.invoke. On the server, this is after call.accept.
+    #
+    # #initialize cannot determine if the call is accepted or not; so if a
+    # call that's not accepted is used here, the error won't be visible until
+    # the BidiCall#run is called.
+    #
+    # deadline is the absolute deadline for the call.
+    #
+    # @param call [Call] the call used by the ActiveCall
+    # @param marshal [Function] f(obj)->string that marshal requests
+    # @param unmarshal [Function] f(string)->obj that unmarshals responses
+    # @param metadata_received [true|false] indicates if metadata has already
+    #     been received. Should always be true for server calls
+    def initialize(call, marshal, unmarshal, metadata_received: false,
+                   req_view: nil)
+      fail(ArgumentError, 'not a call') unless call.is_a? Core::Call
+      @call = call
+      @marshal = marshal
+      @op_notifier = nil  # signals completion on clients
+      @unmarshal = unmarshal
+      @metadata_received = metadata_received
+      @reads_complete = false
+      @writes_complete = false
+      @complete = false
+      @done_mutex = Mutex.new
+      @req_view = req_view
+    end
+
+    # Begins orchestration of the Bidi stream for a client sending requests.
+    #
+    # The method either returns an Enumerator of the responses, or accepts a
+    # block that can be invoked with each response.
+    #
+    # @param requests the Enumerable of requests to send
+    # @param set_input_stream_done [Proc] called back when we're done
+    #   reading the input stream
+    # @param set_output_stream_done [Proc] called back when we're done
+    #   sending data on the output stream
+    # @return an Enumerator of requests to yield
+    def run_on_client(requests,
+                      set_input_stream_done,
+                      set_output_stream_done,
+                      &blk)
+      @enq_th = Thread.new do
+        write_loop(requests, set_output_stream_done: set_output_stream_done)
+      end
+      read_loop(set_input_stream_done, &blk)
+    end
+
+    # Begins orchestration of the Bidi stream for a server generating replies.
+    #
+    # N.B. gen_each_reply is a func(Enumerable<Requests>)
+    #
+    # It takes an enumerable of requests as an arg, in case there is a
+    # relationship between the stream of requests and the stream of replies.
+    #
+    # This does not mean that must necessarily be one.  E.g, the replies
+    # produced by gen_each_reply could ignore the received_msgs
+    #
+    # @param [Proc] gen_each_reply generates the BiDi stream replies.
+    # @param [Enumerable] requests The enumerable of requests to run
+    def run_on_server(gen_each_reply, requests)
+      replies = nil
+
+      # Pass in the optional call object parameter if possible
+      if gen_each_reply.arity == 1
+        replies = gen_each_reply.call(requests)
+      elsif gen_each_reply.arity == 2
+        replies = gen_each_reply.call(requests, @req_view)
+      else
+        fail 'Illegal arity of reply generator'
+      end
+
+      write_loop(replies, is_client: false)
+    end
+
+    ##
+    # Read the next stream iteration
+    #
+    # @param [Proc] finalize_stream callback to call when the reads have been
+    #   completely read through.
+    # @param [Boolean] is_client If this is a client or server request
+    #
+    def read_next_loop(finalize_stream, is_client = false)
+      read_loop(finalize_stream, is_client: is_client)
+    end
+
+    private
+
+    END_OF_READS = :end_of_reads
+    END_OF_WRITES = :end_of_writes
+
+    # performs a read using @call.run_batch, ensures metadata is set up
+    def read_using_run_batch
+      ops = { RECV_MESSAGE => nil }
+      ops[RECV_INITIAL_METADATA] = nil unless @metadata_received
+      begin
+        batch_result = @call.run_batch(ops)
+        unless @metadata_received
+          @call.metadata = batch_result.metadata
+          @metadata_received = true
+        end
+        batch_result
+      rescue GRPC::Core::CallError => e
+        GRPC.logger.warn('bidi call: read_using_run_batch failed')
+        GRPC.logger.warn(e)
+        nil
+      end
+    end
+
+    # set_output_stream_done is relevant on client-side
+    def write_loop(requests, is_client: true, set_output_stream_done: nil)
+      GRPC.logger.debug('bidi-write-loop: starting')
+      count = 0
+      requests.each do |req|
+        GRPC.logger.debug("bidi-write-loop: #{count}")
+        count += 1
+        payload = @marshal.call(req)
+        # Fails if status already received
+        begin
+          @req_view.send_initial_metadata unless @req_view.nil?
+          @call.run_batch(SEND_MESSAGE => payload)
+        rescue GRPC::Core::CallError => e
+          # This is almost definitely caused by a status arriving while still
+          # writing. Don't re-throw the error
+          GRPC.logger.warn('bidi-write-loop: ended with error')
+          GRPC.logger.warn(e)
+          break
+        end
+      end
+      GRPC.logger.debug("bidi-write-loop: #{count} writes done")
+      if is_client
+        GRPC.logger.debug("bidi-write-loop: client sent #{count}, waiting")
+        begin
+          @call.run_batch(SEND_CLOSE_FROM_CLIENT => nil)
+        rescue GRPC::Core::CallError => e
+          GRPC.logger.warn('bidi-write-loop: send close failed')
+          GRPC.logger.warn(e)
+        end
+        GRPC.logger.debug('bidi-write-loop: done')
+      end
+      GRPC.logger.debug('bidi-write-loop: finished')
+    rescue StandardError => e
+      GRPC.logger.warn('bidi-write-loop: failed')
+      GRPC.logger.warn(e)
+      if is_client
+        @call.cancel_with_status(GRPC::Core::StatusCodes::UNKNOWN,
+                                 "GRPC bidi call error: #{e.inspect}")
+      else
+        raise e
+      end
+    ensure
+      set_output_stream_done.call if is_client
+    end
+
+    # Provides an enumerator that yields results of remote reads
+    def read_loop(set_input_stream_done, is_client: true)
+      return enum_for(:read_loop,
+                      set_input_stream_done,
+                      is_client: is_client) unless block_given?
+      GRPC.logger.debug('bidi-read-loop: starting')
+      begin
+        count = 0
+        # queue the initial read before beginning the loop
+        loop do
+          GRPC.logger.debug("bidi-read-loop: #{count}")
+          count += 1
+          batch_result = read_using_run_batch
+
+          # handle the next message
+          if batch_result.nil? || batch_result.message.nil?
+            GRPC.logger.debug("bidi-read-loop: null batch #{batch_result}")
+
+            if is_client
+              batch_result = @call.run_batch(RECV_STATUS_ON_CLIENT => nil)
+              @call.status = batch_result.status
+              @call.trailing_metadata = @call.status.metadata if @call.status
+              GRPC.logger.debug("bidi-read-loop: done status #{@call.status}")
+              batch_result.check_status
+            end
+
+            GRPC.logger.debug('bidi-read-loop: done reading!')
+            break
+          end
+
+          res = @unmarshal.call(batch_result.message)
+          yield res
+        end
+      rescue StandardError => e
+        GRPC.logger.warn('bidi: read-loop failed')
+        GRPC.logger.warn(e)
+        raise e
+      ensure
+        set_input_stream_done.call
+      end
+      GRPC.logger.debug('bidi-read-loop: finished')
+      # Make sure that the write loop is done before finishing the call.
+      # Note that blocking is ok at this point because we've already received
+      # a status
+      @enq_th.join if is_client
+    end
+  end
+end