grpc 1.37.1 → 1.40.0.pre1

data/third_party/boringssl-with-bazel/src/include/openssl/hpke.h

@@ -0,0 +1,325 @@
+/* Copyright (c) 2020, Google Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
+
+#ifndef OPENSSL_HEADER_CRYPTO_HPKE_INTERNAL_H
+#define OPENSSL_HEADER_CRYPTO_HPKE_INTERNAL_H
+
+#include <openssl/aead.h>
+#include <openssl/base.h>
+#include <openssl/curve25519.h>
+#include <openssl/digest.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Hybrid Public Key Encryption.
+//
+// Hybrid Public Key Encryption (HPKE) enables a sender to encrypt messages to a
+// receiver with a public key.
+//
+// See https://tools.ietf.org/html/draft-irtf-cfrg-hpke-08.
+
+
+// Parameters.
+//
+// An HPKE context is parameterized by KEM, KDF, and AEAD algorithms,
+// represented by |EVP_HPKE_KEM|, |EVP_HPKE_KDF|, and |EVP_HPKE_AEAD| types,
+// respectively.
+
+// The following constants are KEM identifiers.
+#define EVP_HPKE_DHKEM_X25519_HKDF_SHA256 0x0020
+
+// The following functions are KEM algorithms which may be used with HPKE. Note
+// that, while some HPKE KEMs use KDFs internally, this is separate from the
+// |EVP_HPKE_KDF| selection.
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_hpke_x25519_hkdf_sha256(void);
+
+// EVP_HPKE_KEM_id returns the HPKE KEM identifier for |kem|, which
+// will be one of the |EVP_HPKE_KEM_*| constants.
+OPENSSL_EXPORT uint16_t EVP_HPKE_KEM_id(const EVP_HPKE_KEM *kem);
+
+// The following constants are KDF identifiers.
+#define EVP_HPKE_HKDF_SHA256 0x0001
+
+// The following functions are KDF algorithms which may be used with HPKE.
+OPENSSL_EXPORT const EVP_HPKE_KDF *EVP_hpke_hkdf_sha256(void);
+
+// EVP_HPKE_KDF_id returns the HPKE KDF identifier for |kdf|.
+OPENSSL_EXPORT uint16_t EVP_HPKE_KDF_id(const EVP_HPKE_KDF *kdf);
+
+// The following constants are AEAD identifiers.
+#define EVP_HPKE_AES_128_GCM 0x0001
+#define EVP_HPKE_AES_256_GCM 0x0002
+#define EVP_HPKE_CHACHA20_POLY1305 0x0003
+
+// The following functions are AEAD algorithms which may be used with HPKE.
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_aes_128_gcm(void);
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_aes_256_gcm(void);
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_hpke_chacha20_poly1305(void);
+
+// EVP_HPKE_AEAD_id returns the HPKE AEAD identifier for |aead|.
+OPENSSL_EXPORT uint16_t EVP_HPKE_AEAD_id(const EVP_HPKE_AEAD *aead);
+
+// EVP_HPKE_AEAD_aead returns the |EVP_AEAD| corresponding to |aead|.
+OPENSSL_EXPORT const EVP_AEAD *EVP_HPKE_AEAD_aead(const EVP_HPKE_AEAD *aead);
+
+
+// Recipient keys.
+//
+// An HPKE recipient maintains a long-term KEM key. This library represents keys
+// with the |EVP_HPKE_KEY| type.
+
+// EVP_HPKE_KEY_zero sets an uninitialized |EVP_HPKE_KEY| to the zero state. The
+// caller should then use |EVP_HPKE_KEY_init|, |EVP_HPKE_KEY_copy|, or
+// |EVP_HPKE_KEY_generate| to finish initializing |key|.
+//
+// It is safe, but not necessary to call |EVP_HPKE_KEY_cleanup| in this state.
+// This may be used for more uniform cleanup of |EVP_HPKE_KEY|.
+OPENSSL_EXPORT void EVP_HPKE_KEY_zero(EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_cleanup releases memory referenced by |key|.
+OPENSSL_EXPORT void EVP_HPKE_KEY_cleanup(EVP_HPKE_KEY *key);
+
+// EVP_HPKE_KEY_copy sets |dst| to a copy of |src|. It returns one on success
+// and zero on error. On success, the caller must call |EVP_HPKE_KEY_cleanup| to
+// release |dst|. On failure, calling |EVP_HPKE_KEY_cleanup| is safe, but not
+// necessary.
+OPENSSL_EXPORT int EVP_HPKE_KEY_copy(EVP_HPKE_KEY *dst,
+                                     const EVP_HPKE_KEY *src);
+
+// EVP_HPKE_KEY_init decodes |priv_key| as a private key for |kem| and
+// initializes |key| with the result. It returns one on success and zero if
+// |priv_key| was invalid. On success, the caller must call
+// |EVP_HPKE_KEY_cleanup| to release the key. On failure, calling
+// |EVP_HPKE_KEY_cleanup| is safe, but not necessary.
+OPENSSL_EXPORT int EVP_HPKE_KEY_init(EVP_HPKE_KEY *key, const EVP_HPKE_KEM *kem,
+                                     const uint8_t *priv_key,
+                                     size_t priv_key_len);
+
+// EVP_HPKE_KEY_generate sets |key| to a newly-generated key using |kem|.
+OPENSSL_EXPORT int EVP_HPKE_KEY_generate(EVP_HPKE_KEY *key,
+                                         const EVP_HPKE_KEM *kem);
+
+// EVP_HPKE_KEY_kem returns the HPKE KEM used by |key|.
+OPENSSL_EXPORT const EVP_HPKE_KEM *EVP_HPKE_KEY_kem(const EVP_HPKE_KEY *key);
+
+// EVP_HPKE_MAX_PUBLIC_KEY_LENGTH is the maximum length of a public key for all
+// KEMs supported by this library.
+#define EVP_HPKE_MAX_PUBLIC_KEY_LENGTH 32
+
+// EVP_HPKE_KEY_public_key writes |key|'s public key to |out| and sets
+// |*out_len| to the number of bytes written. On success, it returns one and
+// writes at most |max_out| bytes. If |max_out| is too small, it returns zero.
+// Setting |max_out| to |EVP_HPKE_MAX_PUBLIC_KEY_LENGTH| will ensure the public
+// key fits.
+OPENSSL_EXPORT int EVP_HPKE_KEY_public_key(const EVP_HPKE_KEY *key,
+                                           uint8_t *out, size_t *out_len,
+                                           size_t max_out);
+
+// EVP_HPKE_MAX_PRIVATE_KEY_LENGTH is the maximum length of a private key for
+// all KEMs supported by this library.
+#define EVP_HPKE_MAX_PRIVATE_KEY_LENGTH 32
+
+// EVP_HPKE_KEY_private_key writes |key|'s private key to |out| and sets
+// |*out_len| to the number of bytes written. On success, it returns one and
+// writes at most |max_out| bytes. If |max_out| is too small, it returns zero.
+// Setting |max_out| to |EVP_HPKE_MAX_PRIVATE_KEY_LENGTH| will ensure the
+// private key fits.
+OPENSSL_EXPORT int EVP_HPKE_KEY_private_key(const EVP_HPKE_KEY *key,
+                                            uint8_t *out, size_t *out_len,
+                                            size_t max_out);
+
+
+// Encryption contexts.
+//
+// An HPKE encryption context is represented by the |EVP_HPKE_CTX| type.
+
+// EVP_HPKE_CTX_zero sets an uninitialized |EVP_HPKE_CTX| to the zero state. The
+// caller should then use one of the |EVP_HPKE_CTX_setup_*| functions to finish
+// setting up |ctx|.
+//
+// It is safe, but not necessary to call |EVP_HPKE_CTX_cleanup| in this state.
+// This may be used for more uniform cleanup of |EVP_HPKE_CTX|.
+OPENSSL_EXPORT void EVP_HPKE_CTX_zero(EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_cleanup releases memory referenced by |ctx|. |ctx| must have
+// been initialized with |EVP_HPKE_CTX_zero| or one of the
+// |EVP_HPKE_CTX_setup_*| functions.
+OPENSSL_EXPORT void EVP_HPKE_CTX_cleanup(EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_MAX_ENC_LENGTH is the maximum length of "enc", the encapsulated
+// shared secret, for all supported KEMs in this library.
+#define EVP_HPKE_MAX_ENC_LENGTH 32
+
+// EVP_HPKE_CTX_setup_sender implements the SetupBaseS HPKE operation. It
+// encapsulates a shared secret for |peer_public_key| and sets up |ctx| as a
+// sender context. It writes the encapsulated shared secret to |out_enc| and
+// sets |*out_enc_len| to the number of bytes written. It writes at most
+// |max_enc| bytes and fails if the buffer is too small. Setting |max_enc| to at
+// least |EVP_HPKE_MAX_ENC_LENGTH| will ensure the buffer is large enough.
+//
+// This function returns one on success and zero on error. Note that
+// |peer_public_key| may be invalid, in which case this function will return an
+// error.
+//
+// On success, callers may call |EVP_HPKE_CTX_seal| to encrypt messages for the
+// recipient. Callers must then call |EVP_HPKE_CTX_cleanup| when done. On
+// failure, calling |EVP_HPKE_CTX_cleanup| is safe, but not required.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_sender(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEM *kem, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len);
+
+// EVP_HPKE_CTX_setup_sender_with_seed_for_testing behaves like
+// |EVP_HPKE_CTX_setup_sender|, but takes a seed to behave deterministically.
+// The seed's format depends on |kem|. For X25519, it is the sender's
+// ephemeral private key.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_sender_with_seed_for_testing(
+    EVP_HPKE_CTX *ctx, uint8_t *out_enc, size_t *out_enc_len, size_t max_enc,
+    const EVP_HPKE_KEM *kem, const EVP_HPKE_KDF *kdf, const EVP_HPKE_AEAD *aead,
+    const uint8_t *peer_public_key, size_t peer_public_key_len,
+    const uint8_t *info, size_t info_len, const uint8_t *seed, size_t seed_len);
+
+// EVP_HPKE_CTX_setup_recipient implements the SetupBaseR HPKE operation. It
+// decapsulates the shared secret in |enc| with |key| and sets up |ctx| as a
+// recipient context. It returns one on success and zero on failure. Note that
+// |enc| may be invalid, in which case this function will return an error.
+//
+// On success, callers may call |EVP_HPKE_CTX_open| to decrypt messages from the
+// sender. Callers must then call |EVP_HPKE_CTX_cleanup| when done. On failure,
+// calling |EVP_HPKE_CTX_cleanup| is safe, but not required.
+OPENSSL_EXPORT int EVP_HPKE_CTX_setup_recipient(
+    EVP_HPKE_CTX *ctx, const EVP_HPKE_KEY *key, const EVP_HPKE_KDF *kdf,
+    const EVP_HPKE_AEAD *aead, const uint8_t *enc, size_t enc_len,
+    const uint8_t *info, size_t info_len);
+
+
+// Using an HPKE context.
+//
+// Once set up, callers may encrypt or decrypt with an |EVP_HPKE_CTX| using the
+// following functions.
+
+// EVP_HPKE_CTX_open uses the HPKE context |ctx| to authenticate |in_len| bytes
+// from |in| and |ad_len| bytes from |ad| and to decrypt at most |in_len| bytes
+// into |out|. It returns one on success, and zero otherwise.
+//
+// This operation will fail if the |ctx| context is not set up as a receiver.
+//
+// Note that HPKE encryption is stateful and ordered. The sender's first call to
+// |EVP_HPKE_CTX_seal| must correspond to the recipient's first call to
+// |EVP_HPKE_CTX_open|, etc.
+//
+// At most |in_len| bytes are written to |out|. In order to ensure success,
+// |max_out_len| should be at least |in_len|. On successful return, |*out_len|
+// is set to the actual number of bytes written.
+OPENSSL_EXPORT int EVP_HPKE_CTX_open(EVP_HPKE_CTX *ctx, uint8_t *out,
+                                     size_t *out_len, size_t max_out_len,
+                                     const uint8_t *in, size_t in_len,
+                                     const uint8_t *ad, size_t ad_len);
+
+// EVP_HPKE_CTX_seal uses the HPKE context |ctx| to encrypt and authenticate
+// |in_len| bytes of ciphertext |in| and authenticate |ad_len| bytes from |ad|,
+// writing the result to |out|. It returns one on success and zero otherwise.
+//
+// This operation will fail if the |ctx| context is not set up as a sender.
+//
+// Note that HPKE encryption is stateful and ordered. The sender's first call to
+// |EVP_HPKE_CTX_seal| must correspond to the recipient's first call to
+// |EVP_HPKE_CTX_open|, etc.
+//
+// At most, |max_out_len| encrypted bytes are written to |out|. On successful
+// return, |*out_len| is set to the actual number of bytes written.
+//
+// To ensure success, |max_out_len| should be |in_len| plus the result of
+// |EVP_HPKE_CTX_max_overhead| or |EVP_HPKE_MAX_OVERHEAD|.
+OPENSSL_EXPORT int EVP_HPKE_CTX_seal(EVP_HPKE_CTX *ctx, uint8_t *out,
+                                     size_t *out_len, size_t max_out_len,
+                                     const uint8_t *in, size_t in_len,
+                                     const uint8_t *ad, size_t ad_len);
+
+// EVP_HPKE_CTX_export uses the HPKE context |ctx| to export a secret of
+// |secret_len| bytes into |out|. This function uses |context_len| bytes from
+// |context| as a context string for the secret. This is necessary to separate
+// different uses of exported secrets and bind relevant caller-specific context
+// into the output. It returns one on success and zero otherwise.
+OPENSSL_EXPORT int EVP_HPKE_CTX_export(const EVP_HPKE_CTX *ctx, uint8_t *out,
+                                       size_t secret_len,
+                                       const uint8_t *context,
+                                       size_t context_len);
+
+// EVP_HPKE_MAX_OVERHEAD contains the largest value that
+// |EVP_HPKE_CTX_max_overhead| would ever return for any context.
+#define EVP_HPKE_MAX_OVERHEAD EVP_AEAD_MAX_OVERHEAD
+
+// EVP_HPKE_CTX_max_overhead returns the maximum number of additional bytes
+// added by sealing data with |EVP_HPKE_CTX_seal|. The |ctx| context must be set
+// up as a sender.
+OPENSSL_EXPORT size_t EVP_HPKE_CTX_max_overhead(const EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_aead returns |ctx|'s configured AEAD, or NULL if the context has
+// not been set up.
+OPENSSL_EXPORT const EVP_HPKE_AEAD *EVP_HPKE_CTX_aead(const EVP_HPKE_CTX *ctx);
+
+// EVP_HPKE_CTX_kdf returns |ctx|'s configured KDF, or NULL if the context has
+// not been set up.
+OPENSSL_EXPORT const EVP_HPKE_KDF *EVP_HPKE_CTX_kdf(const EVP_HPKE_CTX *ctx);
+
+
+// Private structures.
+//
+// The following structures are exported so their types are stack-allocatable,
+// but accessing or modifying their fields is forbidden.
+
+struct evp_hpke_ctx_st {
+  const EVP_HPKE_AEAD *aead;
+  const EVP_HPKE_KDF *kdf;
+  EVP_AEAD_CTX aead_ctx;
+  uint8_t base_nonce[EVP_AEAD_MAX_NONCE_LENGTH];
+  uint8_t exporter_secret[EVP_MAX_MD_SIZE];
+  uint64_t seq;
+  int is_sender;
+};
+
+struct evp_hpke_key_st {
+  const EVP_HPKE_KEM *kem;
+  uint8_t private_key[X25519_PRIVATE_KEY_LEN];
+  uint8_t public_key[X25519_PUBLIC_VALUE_LEN];
+};
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#if !defined(BORINGSSL_NO_CXX)
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+using ScopedEVP_HPKE_CTX =
+    internal::StackAllocated<EVP_HPKE_CTX, void, EVP_HPKE_CTX_zero,
+                             EVP_HPKE_CTX_cleanup>;
+using ScopedEVP_HPKE_KEY =
+    internal::StackAllocated<EVP_HPKE_KEY, void, EVP_HPKE_KEY_zero,
+                             EVP_HPKE_KEY_cleanup>;
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+#endif
+
+#endif  // OPENSSL_HEADER_CRYPTO_HPKE_INTERNAL_H

data/third_party/boringssl-with-bazel/src/include/openssl/obj.h

@@ -91,10 +91,16 @@ OPENSSL_EXPORT ASN1_OBJECT *OBJ_dup(const ASN1_OBJECT *obj);
 // less than, equal to or greater than |b|, respectively.
 OPENSSL_EXPORT int OBJ_cmp(const ASN1_OBJECT *a, const ASN1_OBJECT *b);
 
-// OBJ_get0_data returns a pointer to the DER representation of |obj|.
+// OBJ_get0_data returns a pointer to the DER representation of |obj|. This is
+// the contents of the DER-encoded identifier, not including the tag and length.
+// If |obj| does not have an associated object identifier (i.e. it is a nid-only
+// value), this value is the empty string.
 OPENSSL_EXPORT const uint8_t *OBJ_get0_data(const ASN1_OBJECT *obj);
 
-// OBJ_length returns the length of the DER representation of |obj|.
+// OBJ_length returns the length of the DER representation of |obj|. This is the
+// contents of the DER-encoded identifier, not including the tag and length. If
+// |obj| does not have an associated object identifier (i.e. it is a nid-only
+// value), this value is the empty string.
 OPENSSL_EXPORT size_t OBJ_length(const ASN1_OBJECT *obj);
 
 
@@ -124,9 +130,22 @@ OPENSSL_EXPORT int OBJ_txt2nid(const char *s);
 
 // Getting information about nids.
 
-// OBJ_nid2obj returns the ASN1_OBJECT corresponding to |nid|, or NULL if |nid|
-// is unknown.
-OPENSSL_EXPORT const ASN1_OBJECT *OBJ_nid2obj(int nid);
+// OBJ_nid2obj returns the |ASN1_OBJECT| corresponding to |nid|, or NULL if
+// |nid| is unknown.
+//
+// This function returns a static, immutable |ASN1_OBJECT|. Although the output
+// is not const, callers may not mutate it. It is also not necessary to release
+// the object with |ASN1_OBJECT_free|.
+//
+// However, functions like |X509_ALGOR_set0| expect to take ownership of a
+// possibly dynamically-allocated |ASN1_OBJECT|. |ASN1_OBJECT_free| is a no-op
+// for static |ASN1_OBJECT|s, so |OBJ_nid2obj| is compatible with such
+// functions.
+//
+// Callers are encouraged to store the result of this function in a const
+// pointer. However, if using functions like |X509_ALGOR_set0|, callers may use
+// a non-const pointer and manage ownership.
+OPENSSL_EXPORT ASN1_OBJECT *OBJ_nid2obj(int nid);
 
 // OBJ_nid2sn returns the short name for |nid|, or NULL if |nid| is unknown.
 OPENSSL_EXPORT const char *OBJ_nid2sn(int nid);

data/third_party/boringssl-with-bazel/src/include/openssl/pkcs7.h

@@ -38,7 +38,10 @@ DECLARE_STACK_OF(X509_CRL)
 // success and zero on error. |cbs| is advanced passed the structure.
 //
 // Note that a SignedData structure may contain no certificates, in which case
-// this function succeeds but does not append any certificates.
+// this function succeeds but does not append any certificates. Additionally,
+// certificates in SignedData structures are unordered. Callers should not
+// assume a particular order in |*out_certs| and may need to search for matches
+// or run path-building algorithms.
 OPENSSL_EXPORT int PKCS7_get_raw_certificates(
     STACK_OF(CRYPTO_BUFFER) *out_certs, CBS *cbs, CRYPTO_BUFFER_POOL *pool);
 
@@ -47,7 +50,9 @@ OPENSSL_EXPORT int PKCS7_get_raw_certificates(
 OPENSSL_EXPORT int PKCS7_get_certificates(STACK_OF(X509) *out_certs, CBS *cbs);
 
 // PKCS7_bundle_certificates appends a PKCS#7, SignedData structure containing
-// |certs| to |out|. It returns one on success and zero on error.
+// |certs| to |out|. It returns one on success and zero on error. Note that
+// certificates in SignedData structures are unordered. The order in |certs|
+// will not be preserved.
 OPENSSL_EXPORT int PKCS7_bundle_certificates(
     CBB *out, const STACK_OF(X509) *certs);
 
@@ -56,11 +61,15 @@ OPENSSL_EXPORT int PKCS7_bundle_certificates(
 // |cbs| is advanced passed the structure.
 //
 // Note that a SignedData structure may contain no CRLs, in which case this
-// function succeeds but does not append any CRLs.
+// function succeeds but does not append any CRLs. Additionally, CRLs in
+// SignedData structures are unordered. Callers should not assume an order in
+// |*out_crls| and may need to search for matches.
 OPENSSL_EXPORT int PKCS7_get_CRLs(STACK_OF(X509_CRL) *out_crls, CBS *cbs);
 
 // PKCS7_bundle_CRLs appends a PKCS#7, SignedData structure containing
-// |crls| to |out|. It returns one on success and zero on error.
+// |crls| to |out|. It returns one on success and zero on error. Note that CRLs
+// in SignedData structures are unordered. The order in |crls| will not be
+// preserved.
 OPENSSL_EXPORT int PKCS7_bundle_CRLs(CBB *out, const STACK_OF(X509_CRL) *crls);
 
 // PKCS7_get_PEM_certificates reads a PEM-encoded, PKCS#7, SignedData structure
@@ -68,7 +77,10 @@ OPENSSL_EXPORT int PKCS7_bundle_CRLs(CBB *out, const STACK_OF(X509_CRL) *crls);
 // returns one on success and zero on error.
 //
 // Note that a SignedData structure may contain no certificates, in which case
-// this function succeeds but does not append any certificates.
+// this function succeeds but does not append any certificates. Additionally,
+// certificates in SignedData structures are unordered. Callers should not
+// assume a particular order in |*out_certs| and may need to search for matches
+// or run path-building algorithms.
 OPENSSL_EXPORT int PKCS7_get_PEM_certificates(STACK_OF(X509) *out_certs,
                                               BIO *pem_bio);
 
@@ -77,7 +89,9 @@ OPENSSL_EXPORT int PKCS7_get_PEM_certificates(STACK_OF(X509) *out_certs,
 // success and zero on error.
 //
 // Note that a SignedData structure may contain no CRLs, in which case this
-// function succeeds but does not append any CRLs.
+// function succeeds but does not append any CRLs. Additionally, CRLs in
+// SignedData structures are unordered. Callers should not assume an order in
+// |*out_crls| and may need to search for matches.
 OPENSSL_EXPORT int PKCS7_get_PEM_CRLs(STACK_OF(X509_CRL) *out_crls,
                                       BIO *pem_bio);
 
@@ -101,6 +115,7 @@ typedef struct {
 typedef void PKCS7_ENVELOPE;
 typedef void PKCS7_DIGEST;
 typedef void PKCS7_ENCRYPT;
+typedef void PKCS7_SIGNER_INFO;
 
 typedef struct {
   uint8_t *ber_bytes;
@@ -183,6 +198,7 @@ OPENSSL_EXPORT int PKCS7_type_is_signedAndEnveloped(const PKCS7 *p7);
 #define PKCS7_NOATTR 0x100
 #define PKCS7_NOSMIMECAP 0x200
 #define PKCS7_STREAM 0x1000
+#define PKCS7_PARTIAL 0x4000
 
 // PKCS7_sign assembles |certs| into a PKCS#7 signed data ContentInfo with
 // external data and no signatures. It returns a newly-allocated |PKCS7| on
@@ -190,7 +206,9 @@ OPENSSL_EXPORT int PKCS7_type_is_signedAndEnveloped(const PKCS7 *p7);
 // ignored. |flags| must be equal to |PKCS7_DETACHED|.
 //
 // Note this function only implements a subset of the corresponding OpenSSL
-// function. It is provided for backwards compatibility only.
+// function. It is provided for backwards compatibility only. Additionally,
+// certificates in SignedData structures are unordered. The order of |certs|
+// will not be preserved.
 OPENSSL_EXPORT PKCS7 *PKCS7_sign(X509 *sign_cert, EVP_PKEY *pkey,
                                  STACK_OF(X509) *certs, BIO *data, int flags);