growwer 2.0.0 → 2.2.0

data/spec/models/update_webhook_request_spec.rb

@@ -0,0 +1,60 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::UpdateWebhookRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::UpdateWebhookRequest do
+  #let(:instance) { Growwer::UpdateWebhookRequest.new }
+
+  describe 'test an instance of UpdateWebhookRequest' do
+    it 'should create an instance of UpdateWebhookRequest' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::UpdateWebhookRequest)
+    end
+  end
+
+  describe 'test attribute "url"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "events"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "low_balance_threshold"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "enabled"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/webhook_delivery_attempt_spec.rb

@@ -0,0 +1,64 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookDeliveryAttempt
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookDeliveryAttempt do
+  #let(:instance) { Growwer::WebhookDeliveryAttempt.new }
+
+  describe 'test an instance of WebhookDeliveryAttempt' do
+    it 'should create an instance of WebhookDeliveryAttempt' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookDeliveryAttempt)
+    end
+  end
+
+  describe 'test attribute "attempted_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "status_code"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "duration_ms"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "response_body"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "error"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["address_not_allowed", "timeout", "connection_failed"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.error = value }.not_to raise_error
+      # end
+    end
+  end
+
+end

data/spec/models/webhook_delivery_spec.rb

@@ -0,0 +1,86 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookDelivery
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookDelivery do
+  #let(:instance) { Growwer::WebhookDelivery.new }
+
+  describe 'test an instance of WebhookDelivery' do
+    it 'should create an instance of WebhookDelivery' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookDelivery)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "event_id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "event_type"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["order.created", "order.accepted", "order.rejected", "order.published", "order.update_requested", "order.completed", "order.cancelled", "balance.low", "webhook.test"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.event_type = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "status"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["pending", "succeeded", "failed"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.status = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "attempt_count"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "next_attempt_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "attempts"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/webhook_event_data_spec.rb

@@ -0,0 +1,32 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookEventData
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookEventData do
+  describe '.openapi_one_of' do
+    it 'lists the items referenced in the oneOf array' do
+      expect(described_class.openapi_one_of).to_not be_empty
+    end
+  end
+
+  describe '.build' do
+    it 'returns the correct model' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+end

data/spec/models/webhook_event_spec.rb

@@ -0,0 +1,78 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookEvent
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookEvent do
+  #let(:instance) { Growwer::WebhookEvent.new }
+
+  describe 'test an instance of WebhookEvent' do
+    it 'should create an instance of WebhookEvent' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookEvent)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "type"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["order.created", "order.accepted", "order.rejected", "order.published", "order.update_requested", "order.completed", "order.cancelled", "balance.low", "webhook.test"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.type = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "api_version"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["v1"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.api_version = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "mode"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["live", "test"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.mode = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "data"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/webhook_event_type_spec.rb

@@ -0,0 +1,30 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookEventType
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookEventType do
+  #let(:instance) { Growwer::WebhookEventType.new }
+
+  describe 'test an instance of WebhookEventType' do
+    it 'should create an instance of WebhookEventType' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookEventType)
+    end
+  end
+
+end

data/spec/models/webhook_spec.rb

@@ -0,0 +1,100 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::Webhook
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::Webhook do
+  #let(:instance) { Growwer::Webhook.new }
+
+  describe 'test an instance of Webhook' do
+    it 'should create an instance of Webhook' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::Webhook)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "url"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "events"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "low_balance_threshold"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "enabled"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "disabled_reason"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["by_user", "endpoint_gone", "failing"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.disabled_reason = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "failing_since"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "previous_secret_expires_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "updated_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/webhook_test_event_data_spec.rb

@@ -0,0 +1,36 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookTestEventData
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookTestEventData do
+  #let(:instance) { Growwer::WebhookTestEventData.new }
+
+  describe 'test an instance of WebhookTestEventData' do
+    it 'should create an instance of WebhookTestEventData' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookTestEventData)
+    end
+  end
+
+  describe 'test attribute "webhook_id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/models/webhook_with_secret_spec.rb

@@ -0,0 +1,106 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. Your orders' events and `balance.low` are live: creating a subscription with a test key gets 403 `not_available_in_test_mode` for now. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::WebhookWithSecret
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::WebhookWithSecret do
+  #let(:instance) { Growwer::WebhookWithSecret.new }
+
+  describe 'test an instance of WebhookWithSecret' do
+    it 'should create an instance of WebhookWithSecret' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::WebhookWithSecret)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "url"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "events"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "low_balance_threshold"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "enabled"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "disabled_reason"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["by_user", "endpoint_gone", "failing"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.disabled_reason = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "failing_since"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "previous_secret_expires_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "updated_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "secret"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/spec_helper.rb

@@ -1,7 +1,7 @@
 =begin
 #Growwer API
 
-#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Test mode: a test key (`gw_sk_test_` plus 43 characters) works on your account's test data alone, apart from the real catalogue: test projects, orders and files, and a test wallet that starts at 1,000.00 EUR. Every response to a test key carries `Growwer-Mode: test`, and an id of the other mode answers 404 as a missing object would. - A test order is validated and debited from the test wallet as a live one   is. A simulated seller accepts it a minute later and delivers it two   minutes after that; you approve the delivery or request an update. - The Test helpers top the test wallet up, move a test order on at once and   reset your test data. A live key on them gets 403 `test_mode_only`. - A test key on the seller and managed service operations, on a project's   catalogue writes and on media requests gets 403   `not_available_in_test_mode`. - Idempotency keys are scoped per mode: the same `Idempotency-Key` sent with   a live and a test key never replays the other mode's response.  Webhooks: a subscription receives the events of its mode, signed as Standard Webhooks. A subscription created with a live key gets the events of your orders and your wallet; one created with a test key gets those of your test orders and test wallet, with `mode: test`, and never a live event. `x-webhooks` lists every event Growwer POSTs and its payload; the WebhookEvent schema describes the headers, the signature and the retries.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code (12500 is 125.00 EUR), answered with `amountDecimal`, the same amount as an exact decimal string (\"125.00\"); dates are ISO-8601. 
 
 The version of the OpenAPI document: 1
 Contact: support@growwer.com