growwer 1.0.0

data/spec/models/withdrawal_spec.rb

@@ -0,0 +1,74 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for Growwer::Withdrawal
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe Growwer::Withdrawal do
+  #let(:instance) { Growwer::Withdrawal.new }
+
+  describe 'test an instance of Withdrawal' do
+    it 'should create an instance of Withdrawal' do
+      # uncomment below to test the instance creation
+      #expect(instance).to be_instance_of(Growwer::Withdrawal)
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "state"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["started", "approved", "rejected"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.state = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "amount"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "method"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+      # validator = Petstore::EnumTest::EnumAttributeValidator.new('String', ["bank_transfer", "paypal"])
+      # validator.allowable_values.each do |value|
+      #   expect { instance.method = value }.not_to raise_error
+      # end
+    end
+  end
+
+  describe 'test attribute "has_invoice"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+  describe 'test attribute "created_at"' do
+    it 'should work' do
+      # assertion here. ref: https://rspec.info/features/3-12/rspec-expectations/built-in-matchers/
+    end
+  end
+
+end

data/spec/spec_helper.rb

@@ -0,0 +1,111 @@
+=begin
+#Growwer API
+
+#The Growwer customer API. Authenticate every call with an API key created on your profile page, sent as `Authorization: Bearer <key>`. A read key can call every GET operation; writes need a read and write key and an `Idempotency-Key` header.  Idempotency: use a new `Idempotency-Key` (1 to 255 printable ASCII characters without spaces) for each operation and reuse it only to retry that same operation. Keys belong to your account, not to one API key. - A successful write is stored for 30 days: a retry with the same key and   the same request replays its response with `Idempotent-Replayed: true`   and does nothing again. - A refused write (4xx) has no effect and releases its key: once you fix the   cause, retry with the same key and the write runs. - A failed write (5xx) may have taken effect, so it is never run again under   its key: a retry gets 409 `idempotency_outcome_unknown`. Check whether it   took effect before retrying with a new key. - A retry while the first request is still running gets 409   `idempotency_request_in_progress`. A request still running after 5 minutes   is treated as failed: a retry gets 409 `idempotency_outcome_unknown`. - The same key with a different request (method, path, query or body) gets   409 `idempotency_key_reused`. A write without the header gets 400   `idempotency_key_required`.  Every response carries `X-Request-Id`. Errors share one shape, `{code, message, requestId, details?}`. Money is integer cents plus a currency code and dates are ISO-8601. 
+
+The version of the OpenAPI document: 1
+Contact: support@growwer.com
+Generated by: https://openapi-generator.tech
+Generator version: 7.24.0
+
+=end
+
+# load the gem
+require 'growwer'
+
+# The following  was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+  config.disable_monkey_patching!
+
+  # This setting enables warnings. It's recommended, but in some cases may
+  # be too noisy due to issues in dependencies.
+  config.warnings = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end